| Message ID | 9754c25e8459685d4919017dd7c8709cee7b89ce.1527224960.git.viresh.kumar@linaro.org |
|---|---|
| State | Accepted |
| Commit | 853d5e4b9a48fa91a329123bac33b1cf30277a04 |
| Headers | show |
| Series | hwmon: binding: Fix "#cooling-cells" property's name | expand |
diff --git a/Documentation/devicetree/bindings/hwmon/gpio-fan.txt b/Documentation/devicetree/bindings/hwmon/gpio-fan.txt index 439a7430fc68..2becdcfdc840 100644 --- a/Documentation/devicetree/bindings/hwmon/gpio-fan.txt +++ b/Documentation/devicetree/bindings/hwmon/gpio-fan.txt @@ -11,7 +11,7 @@ Bindings for fan connected to GPIO lines must have the RPM values in ascending order. - alarm-gpios: This pin going active indicates something is wrong with the fan, and a udev event will be fired. -- cooling-cells: If used as a cooling device, must be <2> +- #cooling-cells: If used as a cooling device, must be <2> Also see: Documentation/devicetree/bindings/thermal/thermal.txt min and max states are derived from the speed-map of the fan.
It should be "#cooling-cells" instead of "cooling-cells". Fix it. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> --- Documentation/devicetree/bindings/hwmon/gpio-fan.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) -- 2.15.0.194.g9af6a3dea062