diff mbox series

[1/4] ARM: dts: Restructure Vexpress motherboard includes

Message ID 20180528122658.3241-2-linus.walleij@linaro.org
State Accepted
Commit bd7aff03406dbce495634e8b5d27e9b63f951720
Headers show
Series Switch Versatile Express to use PL111 DRM driver | expand

Commit Message

Linus Walleij May 28, 2018, 12:26 p.m. UTC 
It is a bit unorthodox to just include a file in the middle
of a another DTS file, it breaks the pattern from other device
trees and also makes it really hard to reference things
across the files with phandles.

Restructure the include for the Versatile Express motherboards
to happen at the top of the file, reference the target nodes
directly, and indent the motherboard .dtsi files to reflect
their actual depth in the hiearchy.

This is a purely syntactic change that result in the same
DTB files from the DTS/DTSI files.

Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 arch/arm/boot/dts/vexpress-v2m-rs1.dtsi       | 706 +++++++++---------
 arch/arm/boot/dts/vexpress-v2m.dtsi           | 704 ++++++++---------
 arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts   |   3 +-
 arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts    |   5 +-
 arch/arm/boot/dts/vexpress-v2p-ca5s.dts       |   5 +-
 arch/arm/boot/dts/vexpress-v2p-ca9.dts        |   5 +-
 .../boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts |   5 +-
 7 files changed, 718 insertions(+), 715 deletions(-)

Comments

Sudeep Holla May 29, 2018, 9:25 a.m. UTC | #1 
Hi Linus,

On 28/05/18 13:26, Linus Walleij wrote:
> It is a bit unorthodox to just include a file in the middle
> of a another DTS file, it breaks the pattern from other device
> trees and also makes it really hard to reference things
> across the files with phandles.
> 
> Restructure the include for the Versatile Express motherboards
> to happen at the top of the file, reference the target nodes
> directly, and indent the motherboard .dtsi files to reflect
> their actual depth in the hiearchy.
> 
> This is a purely syntactic change that result in the same
> DTB files from the DTS/DTSI files.
Is it different from v1/earlier version you had posted ?
I have already sent this to ARM SoC and it should be in -next by now.
I will add the remaining 3 patches for v4.19 once you confirm
that I can drop this patch as it's already queued.
Linus Walleij May 29, 2018, 11:48 a.m. UTC | #2 
On Tue, May 29, 2018 at 11:25 AM, Sudeep Holla <sudeep.holla@arm.com> wrote:
> On 28/05/18 13:26, Linus Walleij wrote:

>> This is a purely syntactic change that result in the same
>> DTB files from the DTS/DTSI files.

> Is it different from v1/earlier version you had posted ?

Don't think so. Just resent it as part of the rest.

> I have already sent this to ARM SoC and it should be in -next by now.

Awesome!

> I will add the remaining 3 patches for v4.19 once you confirm
> that I can drop this patch as it's already queued.

Drop it :)

Yours,
Linus Walleij
Sudeep Holla May 29, 2018, 12:34 p.m. UTC | #3 
On 29/05/18 12:48, Linus Walleij wrote:
> On Tue, May 29, 2018 at 11:25 AM, Sudeep Holla <sudeep.holla@arm.com> wrote:
>> On 28/05/18 13:26, Linus Walleij wrote:
> 
>>> This is a purely syntactic change that result in the same
>>> DTB files from the DTS/DTSI files.
> 
>> Is it different from v1/earlier version you had posted ?
> 
> Don't think so. Just resent it as part of the rest.
> 
>> I have already sent this to ARM SoC and it should be in -next by now.
> 
> Awesome!
> 
>> I will add the remaining 3 patches for v4.19 once you confirm
>> that I can drop this patch as it's already queued.
> 
> Drop it :)
> 

Thanks, will apply the remaining patches once v4.18-rc1 is tagged.
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
index 35714ff6f467..7b8ff5b3b912 100644
--- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
@@ -17,426 +17,430 @@ 
  * CHANGES TO vexpress-v2m.dtsi!
  */
 
-	motherboard {
-		model = "V2M-P1";
-		arm,hbi = <0x190>;
-		arm,vexpress,site = <0>;
-		arm,v2m-memory-map = "rs1";
-		compatible = "arm,vexpress,v2m-p1", "simple-bus";
-		#address-cells = <2>; /* SMB chipselect number and offset */
-		#size-cells = <1>;
-		#interrupt-cells = <1>;
-		ranges;
-
-		flash@0,00000000 {
-			compatible = "arm,vexpress-flash", "cfi-flash";
-			reg = <0 0x00000000 0x04000000>,
-			      <4 0x00000000 0x04000000>;
-			bank-width = <4>;
-		};
+/ {
+	smb@8000000 {
+		motherboard {
+			model = "V2M-P1";
+			arm,hbi = <0x190>;
+			arm,vexpress,site = <0>;
+			arm,v2m-memory-map = "rs1";
+			compatible = "arm,vexpress,v2m-p1", "simple-bus";
+			#address-cells = <2>; /* SMB chipselect number and offset */
+			#size-cells = <1>;
+			#interrupt-cells = <1>;
+			ranges;
 
-		psram@1,00000000 {
-			compatible = "arm,vexpress-psram", "mtd-ram";
-			reg = <1 0x00000000 0x02000000>;
-			bank-width = <4>;
-		};
+			flash@0,00000000 {
+				compatible = "arm,vexpress-flash", "cfi-flash";
+				reg = <0 0x00000000 0x04000000>,
+				      <4 0x00000000 0x04000000>;
+				bank-width = <4>;
+			};
 
-		v2m_video_ram: vram@2,00000000 {
-			compatible = "arm,vexpress-vram";
-			reg = <2 0x00000000 0x00800000>;
-		};
+			psram@1,00000000 {
+				compatible = "arm,vexpress-psram", "mtd-ram";
+				reg = <1 0x00000000 0x02000000>;
+				bank-width = <4>;
+			};
 
-		ethernet@2,02000000 {
-			compatible = "smsc,lan9118", "smsc,lan9115";
-			reg = <2 0x02000000 0x10000>;
-			interrupts = <15>;
-			phy-mode = "mii";
-			reg-io-width = <4>;
-			smsc,irq-active-high;
-			smsc,irq-push-pull;
-			vdd33a-supply = <&v2m_fixed_3v3>;
-			vddvario-supply = <&v2m_fixed_3v3>;
-		};
+			v2m_video_ram: vram@2,00000000 {
+				compatible = "arm,vexpress-vram";
+				reg = <2 0x00000000 0x00800000>;
+			};
 
-		usb@2,03000000 {
-			compatible = "nxp,usb-isp1761";
-			reg = <2 0x03000000 0x20000>;
-			interrupts = <16>;
-			port1-otg;
-		};
+			ethernet@2,02000000 {
+				compatible = "smsc,lan9118", "smsc,lan9115";
+				reg = <2 0x02000000 0x10000>;
+				interrupts = <15>;
+				phy-mode = "mii";
+				reg-io-width = <4>;
+				smsc,irq-active-high;
+				smsc,irq-push-pull;
+				vdd33a-supply = <&v2m_fixed_3v3>;
+				vddvario-supply = <&v2m_fixed_3v3>;
+			};
 
-		iofpga@3,00000000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 3 0 0x200000>;
+			usb@2,03000000 {
+				compatible = "nxp,usb-isp1761";
+				reg = <2 0x03000000 0x20000>;
+				interrupts = <16>;
+				port1-otg;
+			};
 
-			v2m_sysreg: sysreg@10000 {
-				compatible = "arm,vexpress-sysreg";
-				reg = <0x010000 0x1000>;
+			iofpga@3,00000000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 3 0 0x200000>;
 
-				v2m_led_gpios: sys_led {
-					compatible = "arm,vexpress-sysreg,sys_led";
-					gpio-controller;
-					#gpio-cells = <2>;
-				};
+				v2m_sysreg: sysreg@10000 {
+					compatible = "arm,vexpress-sysreg";
+					reg = <0x010000 0x1000>;
 
-				v2m_mmc_gpios: sys_mci {
-					compatible = "arm,vexpress-sysreg,sys_mci";
-					gpio-controller;
-					#gpio-cells = <2>;
+					v2m_led_gpios: sys_led {
+						compatible = "arm,vexpress-sysreg,sys_led";
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+
+					v2m_mmc_gpios: sys_mci {
+						compatible = "arm,vexpress-sysreg,sys_mci";
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+
+					v2m_flash_gpios: sys_flash {
+						compatible = "arm,vexpress-sysreg,sys_flash";
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
 				};
 
-				v2m_flash_gpios: sys_flash {
-					compatible = "arm,vexpress-sysreg,sys_flash";
-					gpio-controller;
-					#gpio-cells = <2>;
+				v2m_sysctl: sysctl@20000 {
+					compatible = "arm,sp810", "arm,primecell";
+					reg = <0x020000 0x1000>;
+					clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
+					clock-names = "refclk", "timclk", "apb_pclk";
+					#clock-cells = <1>;
+					clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+					assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+					assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
 				};
-			};
 
-			v2m_sysctl: sysctl@20000 {
-				compatible = "arm,sp810", "arm,primecell";
-				reg = <0x020000 0x1000>;
-				clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
-				clock-names = "refclk", "timclk", "apb_pclk";
-				#clock-cells = <1>;
-				clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
-				assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
-				assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
-			};
+				/* PCI-E I2C bus */
+				v2m_i2c_pcie: i2c@30000 {
+					compatible = "arm,versatile-i2c";
+					reg = <0x030000 0x1000>;
 
-			/* PCI-E I2C bus */
-			v2m_i2c_pcie: i2c@30000 {
-				compatible = "arm,versatile-i2c";
-				reg = <0x030000 0x1000>;
+					#address-cells = <1>;
+					#size-cells = <0>;
 
-				#address-cells = <1>;
-				#size-cells = <0>;
+					pcie-switch@60 {
+						compatible = "idt,89hpes32h8";
+						reg = <0x60>;
+					};
+				};
 
-				pcie-switch@60 {
-					compatible = "idt,89hpes32h8";
-					reg = <0x60>;
+				aaci@40000 {
+					compatible = "arm,pl041", "arm,primecell";
+					reg = <0x040000 0x1000>;
+					interrupts = <11>;
+					clocks = <&smbclk>;
+					clock-names = "apb_pclk";
 				};
-			};
 
-			aaci@40000 {
-				compatible = "arm,pl041", "arm,primecell";
-				reg = <0x040000 0x1000>;
-				interrupts = <11>;
-				clocks = <&smbclk>;
-				clock-names = "apb_pclk";
-			};
+				mmci@50000 {
+					compatible = "arm,pl180", "arm,primecell";
+					reg = <0x050000 0x1000>;
+					interrupts = <9 10>;
+					cd-gpios = <&v2m_mmc_gpios 0 0>;
+					wp-gpios = <&v2m_mmc_gpios 1 0>;
+					max-frequency = <12000000>;
+					vmmc-supply = <&v2m_fixed_3v3>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "mclk", "apb_pclk";
+				};
 
-			mmci@50000 {
-				compatible = "arm,pl180", "arm,primecell";
-				reg = <0x050000 0x1000>;
-				interrupts = <9 10>;
-				cd-gpios = <&v2m_mmc_gpios 0 0>;
-				wp-gpios = <&v2m_mmc_gpios 1 0>;
-				max-frequency = <12000000>;
-				vmmc-supply = <&v2m_fixed_3v3>;
-				clocks = <&v2m_clk24mhz>, <&smbclk>;
-				clock-names = "mclk", "apb_pclk";
-			};
+				kmi@60000 {
+					compatible = "arm,pl050", "arm,primecell";
+					reg = <0x060000 0x1000>;
+					interrupts = <12>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "KMIREFCLK", "apb_pclk";
+				};
 
-			kmi@60000 {
-				compatible = "arm,pl050", "arm,primecell";
-				reg = <0x060000 0x1000>;
-				interrupts = <12>;
-				clocks = <&v2m_clk24mhz>, <&smbclk>;
-				clock-names = "KMIREFCLK", "apb_pclk";
-			};
+				kmi@70000 {
+					compatible = "arm,pl050", "arm,primecell";
+					reg = <0x070000 0x1000>;
+					interrupts = <13>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "KMIREFCLK", "apb_pclk";
+				};
 
-			kmi@70000 {
-				compatible = "arm,pl050", "arm,primecell";
-				reg = <0x070000 0x1000>;
-				interrupts = <13>;
-				clocks = <&v2m_clk24mhz>, <&smbclk>;
-				clock-names = "KMIREFCLK", "apb_pclk";
-			};
+				v2m_serial0: uart@90000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x090000 0x1000>;
+					interrupts = <5>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
 
-			v2m_serial0: uart@90000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x090000 0x1000>;
-				interrupts = <5>;
-				clocks = <&v2m_oscclk2>, <&smbclk>;
-				clock-names = "uartclk", "apb_pclk";
-			};
+				v2m_serial1: uart@a0000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0a0000 0x1000>;
+					interrupts = <6>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
 
-			v2m_serial1: uart@a0000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x0a0000 0x1000>;
-				interrupts = <6>;
-				clocks = <&v2m_oscclk2>, <&smbclk>;
-				clock-names = "uartclk", "apb_pclk";
-			};
+				v2m_serial2: uart@b0000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0b0000 0x1000>;
+					interrupts = <7>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
 
-			v2m_serial2: uart@b0000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x0b0000 0x1000>;
-				interrupts = <7>;
-				clocks = <&v2m_oscclk2>, <&smbclk>;
-				clock-names = "uartclk", "apb_pclk";
-			};
+				v2m_serial3: uart@c0000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0c0000 0x1000>;
+					interrupts = <8>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
 
-			v2m_serial3: uart@c0000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x0c0000 0x1000>;
-				interrupts = <8>;
-				clocks = <&v2m_oscclk2>, <&smbclk>;
-				clock-names = "uartclk", "apb_pclk";
-			};
+				wdt@f0000 {
+					compatible = "arm,sp805", "arm,primecell";
+					reg = <0x0f0000 0x1000>;
+					interrupts = <0>;
+					clocks = <&v2m_refclk32khz>, <&smbclk>;
+					clock-names = "wdogclk", "apb_pclk";
+				};
 
-			wdt@f0000 {
-				compatible = "arm,sp805", "arm,primecell";
-				reg = <0x0f0000 0x1000>;
-				interrupts = <0>;
-				clocks = <&v2m_refclk32khz>, <&smbclk>;
-				clock-names = "wdogclk", "apb_pclk";
-			};
+				v2m_timer01: timer@110000 {
+					compatible = "arm,sp804", "arm,primecell";
+					reg = <0x110000 0x1000>;
+					interrupts = <2>;
+					clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
+					clock-names = "timclken1", "timclken2", "apb_pclk";
+				};
 
-			v2m_timer01: timer@110000 {
-				compatible = "arm,sp804", "arm,primecell";
-				reg = <0x110000 0x1000>;
-				interrupts = <2>;
-				clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
-				clock-names = "timclken1", "timclken2", "apb_pclk";
-			};
+				v2m_timer23: timer@120000 {
+					compatible = "arm,sp804", "arm,primecell";
+					reg = <0x120000 0x1000>;
+					interrupts = <3>;
+					clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
+					clock-names = "timclken1", "timclken2", "apb_pclk";
+				};
 
-			v2m_timer23: timer@120000 {
-				compatible = "arm,sp804", "arm,primecell";
-				reg = <0x120000 0x1000>;
-				interrupts = <3>;
-				clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
-				clock-names = "timclken1", "timclken2", "apb_pclk";
-			};
+				/* DVI I2C bus */
+				v2m_i2c_dvi: i2c@160000 {
+					compatible = "arm,versatile-i2c";
+					reg = <0x160000 0x1000>;
 
-			/* DVI I2C bus */
-			v2m_i2c_dvi: i2c@160000 {
-				compatible = "arm,versatile-i2c";
-				reg = <0x160000 0x1000>;
+					#address-cells = <1>;
+					#size-cells = <0>;
 
-				#address-cells = <1>;
-				#size-cells = <0>;
+					dvi-transmitter@39 {
+						compatible = "sil,sii9022-tpi", "sil,sii9022";
+						reg = <0x39>;
+					};
 
-				dvi-transmitter@39 {
-					compatible = "sil,sii9022-tpi", "sil,sii9022";
-					reg = <0x39>;
+					dvi-transmitter@60 {
+						compatible = "sil,sii9022-cpi", "sil,sii9022";
+						reg = <0x60>;
+					};
 				};
 
-				dvi-transmitter@60 {
-					compatible = "sil,sii9022-cpi", "sil,sii9022";
-					reg = <0x60>;
+				rtc@170000 {
+					compatible = "arm,pl031", "arm,primecell";
+					reg = <0x170000 0x1000>;
+					interrupts = <4>;
+					clocks = <&smbclk>;
+					clock-names = "apb_pclk";
 				};
-			};
-
-			rtc@170000 {
-				compatible = "arm,pl031", "arm,primecell";
-				reg = <0x170000 0x1000>;
-				interrupts = <4>;
-				clocks = <&smbclk>;
-				clock-names = "apb_pclk";
-			};
 
-			compact-flash@1a0000 {
-				compatible = "arm,vexpress-cf", "ata-generic";
-				reg = <0x1a0000 0x100
-				       0x1a0100 0xf00>;
-				reg-shift = <2>;
-			};
-
-			clcd@1f0000 {
-				compatible = "arm,pl111", "arm,primecell";
-				reg = <0x1f0000 0x1000>;
-				interrupt-names = "combined";
-				interrupts = <14>;
-				clocks = <&v2m_oscclk1>, <&smbclk>;
-				clock-names = "clcdclk", "apb_pclk";
-				memory-region = <&v2m_video_ram>;
-				max-memory-bandwidth = <50350000>; /* 16bpp @ 25.175MHz */
-
-				port {
-					v2m_clcd_pads: endpoint {
-						remote-endpoint = <&v2m_clcd_panel>;
-						arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
-					};
+				compact-flash@1a0000 {
+					compatible = "arm,vexpress-cf", "ata-generic";
+					reg = <0x1a0000 0x100
+					       0x1a0100 0xf00>;
+					reg-shift = <2>;
 				};
 
-				panel {
-					compatible = "panel-dpi";
+				clcd@1f0000 {
+					compatible = "arm,pl111", "arm,primecell";
+					reg = <0x1f0000 0x1000>;
+					interrupt-names = "combined";
+					interrupts = <14>;
+					clocks = <&v2m_oscclk1>, <&smbclk>;
+					clock-names = "clcdclk", "apb_pclk";
+					memory-region = <&v2m_video_ram>;
+					max-memory-bandwidth = <50350000>; /* 16bpp @ 25.175MHz */
 
 					port {
-						v2m_clcd_panel: endpoint {
-							remote-endpoint = <&v2m_clcd_pads>;
+						v2m_clcd_pads: endpoint {
+							remote-endpoint = <&v2m_clcd_panel>;
+							arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
 						};
 					};
 
-					panel-timing {
-						clock-frequency = <25175000>;
-						hactive = <640>;
-						hback-porch = <40>;
-						hfront-porch = <24>;
-						hsync-len = <96>;
-						vactive = <480>;
-						vback-porch = <32>;
-						vfront-porch = <11>;
-						vsync-len = <2>;
+					panel {
+						compatible = "panel-dpi";
+
+						port {
+							v2m_clcd_panel: endpoint {
+								remote-endpoint = <&v2m_clcd_pads>;
+							};
+						};
+
+						panel-timing {
+							clock-frequency = <25175000>;
+							hactive = <640>;
+							hback-porch = <40>;
+							hfront-porch = <24>;
+							hsync-len = <96>;
+							vactive = <480>;
+							vback-porch = <32>;
+							vfront-porch = <11>;
+							vsync-len = <2>;
+						};
 					};
 				};
 			};
-		};
 
-		v2m_fixed_3v3: fixed-regulator-0 {
-			compatible = "regulator-fixed";
-			regulator-name = "3V3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
+			v2m_fixed_3v3: fixed-regulator-0 {
+				compatible = "regulator-fixed";
+				regulator-name = "3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
 
-		v2m_clk24mhz: clk24mhz {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <24000000>;
-			clock-output-names = "v2m:clk24mhz";
-		};
+			v2m_clk24mhz: clk24mhz {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <24000000>;
+				clock-output-names = "v2m:clk24mhz";
+			};
 
-		v2m_refclk1mhz: refclk1mhz {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <1000000>;
-			clock-output-names = "v2m:refclk1mhz";
-		};
+			v2m_refclk1mhz: refclk1mhz {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <1000000>;
+				clock-output-names = "v2m:refclk1mhz";
+			};
 
-		v2m_refclk32khz: refclk32khz {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-			clock-output-names = "v2m:refclk32khz";
-		};
+			v2m_refclk32khz: refclk32khz {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <32768>;
+				clock-output-names = "v2m:refclk32khz";
+			};
 
-		leds {
-			compatible = "gpio-leds";
+			leds {
+				compatible = "gpio-leds";
 
-			user1 {
-				label = "v2m:green:user1";
-				gpios = <&v2m_led_gpios 0 0>;
-				linux,default-trigger = "heartbeat";
-			};
+				user1 {
+					label = "v2m:green:user1";
+					gpios = <&v2m_led_gpios 0 0>;
+					linux,default-trigger = "heartbeat";
+				};
 
-			user2 {
-				label = "v2m:green:user2";
-				gpios = <&v2m_led_gpios 1 0>;
-				linux,default-trigger = "mmc0";
-			};
+				user2 {
+					label = "v2m:green:user2";
+					gpios = <&v2m_led_gpios 1 0>;
+					linux,default-trigger = "mmc0";
+				};
 
-			user3 {
-				label = "v2m:green:user3";
-				gpios = <&v2m_led_gpios 2 0>;
-				linux,default-trigger = "cpu0";
-			};
+				user3 {
+					label = "v2m:green:user3";
+					gpios = <&v2m_led_gpios 2 0>;
+					linux,default-trigger = "cpu0";
+				};
 
-			user4 {
-				label = "v2m:green:user4";
-				gpios = <&v2m_led_gpios 3 0>;
-				linux,default-trigger = "cpu1";
-			};
+				user4 {
+					label = "v2m:green:user4";
+					gpios = <&v2m_led_gpios 3 0>;
+					linux,default-trigger = "cpu1";
+				};
 
-			user5 {
-				label = "v2m:green:user5";
-				gpios = <&v2m_led_gpios 4 0>;
-				linux,default-trigger = "cpu2";
-			};
+				user5 {
+					label = "v2m:green:user5";
+					gpios = <&v2m_led_gpios 4 0>;
+					linux,default-trigger = "cpu2";
+				};
 
-			user6 {
-				label = "v2m:green:user6";
-				gpios = <&v2m_led_gpios 5 0>;
-				linux,default-trigger = "cpu3";
-			};
+				user6 {
+					label = "v2m:green:user6";
+					gpios = <&v2m_led_gpios 5 0>;
+					linux,default-trigger = "cpu3";
+				};
 
-			user7 {
-				label = "v2m:green:user7";
-				gpios = <&v2m_led_gpios 6 0>;
-				linux,default-trigger = "cpu4";
-			};
+				user7 {
+					label = "v2m:green:user7";
+					gpios = <&v2m_led_gpios 6 0>;
+					linux,default-trigger = "cpu4";
+				};
 
-			user8 {
-				label = "v2m:green:user8";
-				gpios = <&v2m_led_gpios 7 0>;
-				linux,default-trigger = "cpu5";
+				user8 {
+					label = "v2m:green:user8";
+					gpios = <&v2m_led_gpios 7 0>;
+					linux,default-trigger = "cpu5";
+				};
 			};
-		};
 
-		mcc {
-			compatible = "arm,vexpress,config-bus";
-			arm,vexpress,config-bridge = <&v2m_sysreg>;
+			mcc {
+				compatible = "arm,vexpress,config-bus";
+				arm,vexpress,config-bridge = <&v2m_sysreg>;
 
-			oscclk0 {
-				/* MCC static memory clock */
-				compatible = "arm,vexpress-osc";
-				arm,vexpress-sysreg,func = <1 0>;
-				freq-range = <25000000 60000000>;
-				#clock-cells = <0>;
-				clock-output-names = "v2m:oscclk0";
-			};
+				oscclk0 {
+					/* MCC static memory clock */
+					compatible = "arm,vexpress-osc";
+					arm,vexpress-sysreg,func = <1 0>;
+					freq-range = <25000000 60000000>;
+					#clock-cells = <0>;
+					clock-output-names = "v2m:oscclk0";
+				};
 
-			v2m_oscclk1: oscclk1 {
-				/* CLCD clock */
-				compatible = "arm,vexpress-osc";
-				arm,vexpress-sysreg,func = <1 1>;
-				freq-range = <23750000 65000000>;
-				#clock-cells = <0>;
-				clock-output-names = "v2m:oscclk1";
-			};
+				v2m_oscclk1: oscclk1 {
+					/* CLCD clock */
+					compatible = "arm,vexpress-osc";
+					arm,vexpress-sysreg,func = <1 1>;
+					freq-range = <23750000 65000000>;
+					#clock-cells = <0>;
+					clock-output-names = "v2m:oscclk1";
+				};
 
-			v2m_oscclk2: oscclk2 {
-				/* IO FPGA peripheral clock */
-				compatible = "arm,vexpress-osc";
-				arm,vexpress-sysreg,func = <1 2>;
-				freq-range = <24000000 24000000>;
-				#clock-cells = <0>;
-				clock-output-names = "v2m:oscclk2";
-			};
+				v2m_oscclk2: oscclk2 {
+					/* IO FPGA peripheral clock */
+					compatible = "arm,vexpress-osc";
+					arm,vexpress-sysreg,func = <1 2>;
+					freq-range = <24000000 24000000>;
+					#clock-cells = <0>;
+					clock-output-names = "v2m:oscclk2";
+				};
 
-			volt-vio {
-				/* Logic level voltage */
-				compatible = "arm,vexpress-volt";
-				arm,vexpress-sysreg,func = <2 0>;
-				regulator-name = "VIO";
-				regulator-always-on;
-				label = "VIO";
-			};
+				volt-vio {
+					/* Logic level voltage */
+					compatible = "arm,vexpress-volt";
+					arm,vexpress-sysreg,func = <2 0>;
+					regulator-name = "VIO";
+					regulator-always-on;
+					label = "VIO";
+				};
 
-			temp-mcc {
-				/* MCC internal operating temperature */
-				compatible = "arm,vexpress-temp";
-				arm,vexpress-sysreg,func = <4 0>;
-				label = "MCC";
-			};
+				temp-mcc {
+					/* MCC internal operating temperature */
+					compatible = "arm,vexpress-temp";
+					arm,vexpress-sysreg,func = <4 0>;
+					label = "MCC";
+				};
 
-			reset {
-				compatible = "arm,vexpress-reset";
-				arm,vexpress-sysreg,func = <5 0>;
-			};
+				reset {
+					compatible = "arm,vexpress-reset";
+					arm,vexpress-sysreg,func = <5 0>;
+				};
 
-			muxfpga {
-				compatible = "arm,vexpress-muxfpga";
-				arm,vexpress-sysreg,func = <7 0>;
-			};
+				muxfpga {
+					compatible = "arm,vexpress-muxfpga";
+					arm,vexpress-sysreg,func = <7 0>;
+				};
 
-			shutdown {
-				compatible = "arm,vexpress-shutdown";
-				arm,vexpress-sysreg,func = <8 0>;
-			};
+				shutdown {
+					compatible = "arm,vexpress-shutdown";
+					arm,vexpress-sysreg,func = <8 0>;
+				};
 
-			reboot {
-				compatible = "arm,vexpress-reboot";
-				arm,vexpress-sysreg,func = <9 0>;
-			};
+				reboot {
+					compatible = "arm,vexpress-reboot";
+					arm,vexpress-sysreg,func = <9 0>;
+				};
 
-			dvimode {
-				compatible = "arm,vexpress-dvimode";
-				arm,vexpress-sysreg,func = <11 0>;
+				dvimode {
+					compatible = "arm,vexpress-dvimode";
+					arm,vexpress-sysreg,func = <11 0>;
+				};
 			};
 		};
 	};
+};
diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi
index b0021a816028..9cd5e146abd5 100644
--- a/arch/arm/boot/dts/vexpress-v2m.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m.dtsi
@@ -18,425 +18,429 @@ 
  * CHANGES TO vexpress-v2m-rs1.dtsi!
  */
 
-	motherboard {
-		model = "V2M-P1";
-		arm,hbi = <0x190>;
-		arm,vexpress,site = <0>;
-		compatible = "arm,vexpress,v2m-p1", "simple-bus";
-		#address-cells = <2>; /* SMB chipselect number and offset */
-		#size-cells = <1>;
-		#interrupt-cells = <1>;
-		ranges;
-
-		flash@0,00000000 {
-			compatible = "arm,vexpress-flash", "cfi-flash";
-			reg = <0 0x00000000 0x04000000>,
-			      <1 0x00000000 0x04000000>;
-			bank-width = <4>;
-		};
+/ {
+	smb@4000000 {
+		motherboard {
+			model = "V2M-P1";
+			arm,hbi = <0x190>;
+			arm,vexpress,site = <0>;
+			compatible = "arm,vexpress,v2m-p1", "simple-bus";
+			#address-cells = <2>; /* SMB chipselect number and offset */
+			#size-cells = <1>;
+			#interrupt-cells = <1>;
+			ranges;
 
-		psram@2,00000000 {
-			compatible = "arm,vexpress-psram", "mtd-ram";
-			reg = <2 0x00000000 0x02000000>;
-			bank-width = <4>;
-		};
+			flash@0,00000000 {
+				compatible = "arm,vexpress-flash", "cfi-flash";
+				reg = <0 0x00000000 0x04000000>,
+				      <1 0x00000000 0x04000000>;
+				bank-width = <4>;
+			};
 
-		v2m_video_ram: vram@3,00000000 {
-			compatible = "arm,vexpress-vram";
-			reg = <3 0x00000000 0x00800000>;
-		};
+			psram@2,00000000 {
+				compatible = "arm,vexpress-psram", "mtd-ram";
+				reg = <2 0x00000000 0x02000000>;
+				bank-width = <4>;
+			};
 
-		ethernet@3,02000000 {
-			compatible = "smsc,lan9118", "smsc,lan9115";
-			reg = <3 0x02000000 0x10000>;
-			interrupts = <15>;
-			phy-mode = "mii";
-			reg-io-width = <4>;
-			smsc,irq-active-high;
-			smsc,irq-push-pull;
-			vdd33a-supply = <&v2m_fixed_3v3>;
-			vddvario-supply = <&v2m_fixed_3v3>;
-		};
+			v2m_video_ram: vram@3,00000000 {
+				compatible = "arm,vexpress-vram";
+				reg = <3 0x00000000 0x00800000>;
+			};
 
-		usb@3,03000000 {
-			compatible = "nxp,usb-isp1761";
-			reg = <3 0x03000000 0x20000>;
-			interrupts = <16>;
-			port1-otg;
-		};
+			ethernet@3,02000000 {
+				compatible = "smsc,lan9118", "smsc,lan9115";
+				reg = <3 0x02000000 0x10000>;
+				interrupts = <15>;
+				phy-mode = "mii";
+				reg-io-width = <4>;
+				smsc,irq-active-high;
+				smsc,irq-push-pull;
+				vdd33a-supply = <&v2m_fixed_3v3>;
+				vddvario-supply = <&v2m_fixed_3v3>;
+			};
 
-		iofpga@7,00000000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 7 0 0x20000>;
+			usb@3,03000000 {
+				compatible = "nxp,usb-isp1761";
+				reg = <3 0x03000000 0x20000>;
+				interrupts = <16>;
+				port1-otg;
+			};
 
-			v2m_sysreg: sysreg@0 {
-				compatible = "arm,vexpress-sysreg";
-				reg = <0x00000 0x1000>;
+			iofpga@7,00000000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 7 0 0x20000>;
 
-				v2m_led_gpios: sys_led {
-					compatible = "arm,vexpress-sysreg,sys_led";
-					gpio-controller;
-					#gpio-cells = <2>;
-				};
+				v2m_sysreg: sysreg@0 {
+					compatible = "arm,vexpress-sysreg";
+					reg = <0x00000 0x1000>;
 
-				v2m_mmc_gpios: sys_mci {
-					compatible = "arm,vexpress-sysreg,sys_mci";
-					gpio-controller;
-					#gpio-cells = <2>;
+					v2m_led_gpios: sys_led {
+						compatible = "arm,vexpress-sysreg,sys_led";
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+
+					v2m_mmc_gpios: sys_mci {
+						compatible = "arm,vexpress-sysreg,sys_mci";
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+
+					v2m_flash_gpios: sys_flash {
+						compatible = "arm,vexpress-sysreg,sys_flash";
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
 				};
 
-				v2m_flash_gpios: sys_flash {
-					compatible = "arm,vexpress-sysreg,sys_flash";
-					gpio-controller;
-					#gpio-cells = <2>;
+				v2m_sysctl: sysctl@1000 {
+					compatible = "arm,sp810", "arm,primecell";
+					reg = <0x01000 0x1000>;
+					clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
+					clock-names = "refclk", "timclk", "apb_pclk";
+					#clock-cells = <1>;
+					clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+					assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+					assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
 				};
-			};
 
-			v2m_sysctl: sysctl@1000 {
-				compatible = "arm,sp810", "arm,primecell";
-				reg = <0x01000 0x1000>;
-				clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
-				clock-names = "refclk", "timclk", "apb_pclk";
-				#clock-cells = <1>;
-				clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
-				assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
-				assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
-			};
+				/* PCI-E I2C bus */
+				v2m_i2c_pcie: i2c@2000 {
+					compatible = "arm,versatile-i2c";
+					reg = <0x02000 0x1000>;
 
-			/* PCI-E I2C bus */
-			v2m_i2c_pcie: i2c@2000 {
-				compatible = "arm,versatile-i2c";
-				reg = <0x02000 0x1000>;
+					#address-cells = <1>;
+					#size-cells = <0>;
 
-				#address-cells = <1>;
-				#size-cells = <0>;
+					pcie-switch@60 {
+						compatible = "idt,89hpes32h8";
+						reg = <0x60>;
+					};
+				};
 
-				pcie-switch@60 {
-					compatible = "idt,89hpes32h8";
-					reg = <0x60>;
+				aaci@4000 {
+					compatible = "arm,pl041", "arm,primecell";
+					reg = <0x04000 0x1000>;
+					interrupts = <11>;
+					clocks = <&smbclk>;
+					clock-names = "apb_pclk";
 				};
-			};
 
-			aaci@4000 {
-				compatible = "arm,pl041", "arm,primecell";
-				reg = <0x04000 0x1000>;
-				interrupts = <11>;
-				clocks = <&smbclk>;
-				clock-names = "apb_pclk";
-			};
+				mmci@5000 {
+					compatible = "arm,pl180", "arm,primecell";
+					reg = <0x05000 0x1000>;
+					interrupts = <9 10>;
+					cd-gpios = <&v2m_mmc_gpios 0 0>;
+					wp-gpios = <&v2m_mmc_gpios 1 0>;
+					max-frequency = <12000000>;
+					vmmc-supply = <&v2m_fixed_3v3>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "mclk", "apb_pclk";
+				};
 
-			mmci@5000 {
-				compatible = "arm,pl180", "arm,primecell";
-				reg = <0x05000 0x1000>;
-				interrupts = <9 10>;
-				cd-gpios = <&v2m_mmc_gpios 0 0>;
-				wp-gpios = <&v2m_mmc_gpios 1 0>;
-				max-frequency = <12000000>;
-				vmmc-supply = <&v2m_fixed_3v3>;
-				clocks = <&v2m_clk24mhz>, <&smbclk>;
-				clock-names = "mclk", "apb_pclk";
-			};
+				kmi@6000 {
+					compatible = "arm,pl050", "arm,primecell";
+					reg = <0x06000 0x1000>;
+					interrupts = <12>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "KMIREFCLK", "apb_pclk";
+				};
 
-			kmi@6000 {
-				compatible = "arm,pl050", "arm,primecell";
-				reg = <0x06000 0x1000>;
-				interrupts = <12>;
-				clocks = <&v2m_clk24mhz>, <&smbclk>;
-				clock-names = "KMIREFCLK", "apb_pclk";
-			};
+				kmi@7000 {
+					compatible = "arm,pl050", "arm,primecell";
+					reg = <0x07000 0x1000>;
+					interrupts = <13>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "KMIREFCLK", "apb_pclk";
+				};
 
-			kmi@7000 {
-				compatible = "arm,pl050", "arm,primecell";
-				reg = <0x07000 0x1000>;
-				interrupts = <13>;
-				clocks = <&v2m_clk24mhz>, <&smbclk>;
-				clock-names = "KMIREFCLK", "apb_pclk";
-			};
+				v2m_serial0: uart@9000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x09000 0x1000>;
+					interrupts = <5>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
 
-			v2m_serial0: uart@9000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x09000 0x1000>;
-				interrupts = <5>;
-				clocks = <&v2m_oscclk2>, <&smbclk>;
-				clock-names = "uartclk", "apb_pclk";
-			};
+				v2m_serial1: uart@a000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0a000 0x1000>;
+					interrupts = <6>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
 
-			v2m_serial1: uart@a000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x0a000 0x1000>;
-				interrupts = <6>;
-				clocks = <&v2m_oscclk2>, <&smbclk>;
-				clock-names = "uartclk", "apb_pclk";
-			};
+				v2m_serial2: uart@b000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0b000 0x1000>;
+					interrupts = <7>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
 
-			v2m_serial2: uart@b000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x0b000 0x1000>;
-				interrupts = <7>;
-				clocks = <&v2m_oscclk2>, <&smbclk>;
-				clock-names = "uartclk", "apb_pclk";
-			};
+				v2m_serial3: uart@c000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0c000 0x1000>;
+					interrupts = <8>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
 
-			v2m_serial3: uart@c000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x0c000 0x1000>;
-				interrupts = <8>;
-				clocks = <&v2m_oscclk2>, <&smbclk>;
-				clock-names = "uartclk", "apb_pclk";
-			};
+				wdt@f000 {
+					compatible = "arm,sp805", "arm,primecell";
+					reg = <0x0f000 0x1000>;
+					interrupts = <0>;
+					clocks = <&v2m_refclk32khz>, <&smbclk>;
+					clock-names = "wdogclk", "apb_pclk";
+				};
 
-			wdt@f000 {
-				compatible = "arm,sp805", "arm,primecell";
-				reg = <0x0f000 0x1000>;
-				interrupts = <0>;
-				clocks = <&v2m_refclk32khz>, <&smbclk>;
-				clock-names = "wdogclk", "apb_pclk";
-			};
+				v2m_timer01: timer@11000 {
+					compatible = "arm,sp804", "arm,primecell";
+					reg = <0x11000 0x1000>;
+					interrupts = <2>;
+					clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
+					clock-names = "timclken1", "timclken2", "apb_pclk";
+				};
 
-			v2m_timer01: timer@11000 {
-				compatible = "arm,sp804", "arm,primecell";
-				reg = <0x11000 0x1000>;
-				interrupts = <2>;
-				clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
-				clock-names = "timclken1", "timclken2", "apb_pclk";
-			};
+				v2m_timer23: timer@12000 {
+					compatible = "arm,sp804", "arm,primecell";
+					reg = <0x12000 0x1000>;
+					interrupts = <3>;
+					clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
+					clock-names = "timclken1", "timclken2", "apb_pclk";
+				};
 
-			v2m_timer23: timer@12000 {
-				compatible = "arm,sp804", "arm,primecell";
-				reg = <0x12000 0x1000>;
-				interrupts = <3>;
-				clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
-				clock-names = "timclken1", "timclken2", "apb_pclk";
-			};
+				/* DVI I2C bus */
+				v2m_i2c_dvi: i2c@16000 {
+					compatible = "arm,versatile-i2c";
+					reg = <0x16000 0x1000>;
 
-			/* DVI I2C bus */
-			v2m_i2c_dvi: i2c@16000 {
-				compatible = "arm,versatile-i2c";
-				reg = <0x16000 0x1000>;
+					#address-cells = <1>;
+					#size-cells = <0>;
 
-				#address-cells = <1>;
-				#size-cells = <0>;
+					dvi-transmitter@39 {
+						compatible = "sil,sii9022-tpi", "sil,sii9022";
+						reg = <0x39>;
+					};
 
-				dvi-transmitter@39 {
-					compatible = "sil,sii9022-tpi", "sil,sii9022";
-					reg = <0x39>;
+					dvi-transmitter@60 {
+						compatible = "sil,sii9022-cpi", "sil,sii9022";
+						reg = <0x60>;
+					};
 				};
 
-				dvi-transmitter@60 {
-					compatible = "sil,sii9022-cpi", "sil,sii9022";
-					reg = <0x60>;
+				rtc@17000 {
+					compatible = "arm,pl031", "arm,primecell";
+					reg = <0x17000 0x1000>;
+					interrupts = <4>;
+					clocks = <&smbclk>;
+					clock-names = "apb_pclk";
 				};
-			};
-
-			rtc@17000 {
-				compatible = "arm,pl031", "arm,primecell";
-				reg = <0x17000 0x1000>;
-				interrupts = <4>;
-				clocks = <&smbclk>;
-				clock-names = "apb_pclk";
-			};
 
-			compact-flash@1a000 {
-				compatible = "arm,vexpress-cf", "ata-generic";
-				reg = <0x1a000 0x100
-				       0x1a100 0xf00>;
-				reg-shift = <2>;
-			};
-
-			clcd@1f000 {
-				compatible = "arm,pl111", "arm,primecell";
-				reg = <0x1f000 0x1000>;
-				interrupt-names = "combined";
-				interrupts = <14>;
-				clocks = <&v2m_oscclk1>, <&smbclk>;
-				clock-names = "clcdclk", "apb_pclk";
-				memory-region = <&v2m_video_ram>;
-				max-memory-bandwidth = <50350000>; /* 16bpp @ 25.175MHz */
-
-				port {
-					v2m_clcd_pads: endpoint {
-						remote-endpoint = <&v2m_clcd_panel>;
-						arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
-					};
+				compact-flash@1a000 {
+					compatible = "arm,vexpress-cf", "ata-generic";
+					reg = <0x1a000 0x100
+					       0x1a100 0xf00>;
+					reg-shift = <2>;
 				};
 
-				panel {
-					compatible = "panel-dpi";
+				clcd@1f000 {
+					compatible = "arm,pl111", "arm,primecell";
+					reg = <0x1f000 0x1000>;
+					interrupt-names = "combined";
+					interrupts = <14>;
+					clocks = <&v2m_oscclk1>, <&smbclk>;
+					clock-names = "clcdclk", "apb_pclk";
+					memory-region = <&v2m_video_ram>;
+					max-memory-bandwidth = <50350000>; /* 16bpp @ 25.175MHz */
 
 					port {
-						v2m_clcd_panel: endpoint {
-							remote-endpoint = <&v2m_clcd_pads>;
+						v2m_clcd_pads: endpoint {
+							remote-endpoint = <&v2m_clcd_panel>;
+							arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
 						};
 					};
 
-					panel-timing {
-						clock-frequency = <25175000>;
-						hactive = <640>;
-						hback-porch = <40>;
-						hfront-porch = <24>;
-						hsync-len = <96>;
-						vactive = <480>;
-						vback-porch = <32>;
-						vfront-porch = <11>;
-						vsync-len = <2>;
+					panel {
+						compatible = "panel-dpi";
+
+						port {
+							v2m_clcd_panel: endpoint {
+								remote-endpoint = <&v2m_clcd_pads>;
+							};
+						};
+
+						panel-timing {
+							clock-frequency = <25175000>;
+							hactive = <640>;
+							hback-porch = <40>;
+							hfront-porch = <24>;
+							hsync-len = <96>;
+							vactive = <480>;
+							vback-porch = <32>;
+							vfront-porch = <11>;
+							vsync-len = <2>;
+						};
 					};
 				};
 			};
-		};
 
-		v2m_fixed_3v3: fixed-regulator-0 {
-			compatible = "regulator-fixed";
-			regulator-name = "3V3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
+			v2m_fixed_3v3: fixed-regulator-0 {
+				compatible = "regulator-fixed";
+				regulator-name = "3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
 
-		v2m_clk24mhz: clk24mhz {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <24000000>;
-			clock-output-names = "v2m:clk24mhz";
-		};
+			v2m_clk24mhz: clk24mhz {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <24000000>;
+				clock-output-names = "v2m:clk24mhz";
+			};
 
-		v2m_refclk1mhz: refclk1mhz {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <1000000>;
-			clock-output-names = "v2m:refclk1mhz";
-		};
+			v2m_refclk1mhz: refclk1mhz {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <1000000>;
+				clock-output-names = "v2m:refclk1mhz";
+			};
 
-		v2m_refclk32khz: refclk32khz {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-			clock-output-names = "v2m:refclk32khz";
-		};
+			v2m_refclk32khz: refclk32khz {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <32768>;
+				clock-output-names = "v2m:refclk32khz";
+			};
 
-		leds {
-			compatible = "gpio-leds";
+			leds {
+				compatible = "gpio-leds";
 
-			user1 {
-				label = "v2m:green:user1";
-				gpios = <&v2m_led_gpios 0 0>;
-				linux,default-trigger = "heartbeat";
-			};
+				user1 {
+					label = "v2m:green:user1";
+					gpios = <&v2m_led_gpios 0 0>;
+					linux,default-trigger = "heartbeat";
+				};
 
-			user2 {
-				label = "v2m:green:user2";
-				gpios = <&v2m_led_gpios 1 0>;
-				linux,default-trigger = "mmc0";
-			};
+				user2 {
+					label = "v2m:green:user2";
+					gpios = <&v2m_led_gpios 1 0>;
+					linux,default-trigger = "mmc0";
+				};
 
-			user3 {
-				label = "v2m:green:user3";
-				gpios = <&v2m_led_gpios 2 0>;
-				linux,default-trigger = "cpu0";
-			};
+				user3 {
+					label = "v2m:green:user3";
+					gpios = <&v2m_led_gpios 2 0>;
+					linux,default-trigger = "cpu0";
+				};
 
-			user4 {
-				label = "v2m:green:user4";
-				gpios = <&v2m_led_gpios 3 0>;
-				linux,default-trigger = "cpu1";
-			};
+				user4 {
+					label = "v2m:green:user4";
+					gpios = <&v2m_led_gpios 3 0>;
+					linux,default-trigger = "cpu1";
+				};
 
-			user5 {
-				label = "v2m:green:user5";
-				gpios = <&v2m_led_gpios 4 0>;
-				linux,default-trigger = "cpu2";
-			};
+				user5 {
+					label = "v2m:green:user5";
+					gpios = <&v2m_led_gpios 4 0>;
+					linux,default-trigger = "cpu2";
+				};
 
-			user6 {
-				label = "v2m:green:user6";
-				gpios = <&v2m_led_gpios 5 0>;
-				linux,default-trigger = "cpu3";
-			};
+				user6 {
+					label = "v2m:green:user6";
+					gpios = <&v2m_led_gpios 5 0>;
+					linux,default-trigger = "cpu3";
+				};
 
-			user7 {
-				label = "v2m:green:user7";
-				gpios = <&v2m_led_gpios 6 0>;
-				linux,default-trigger = "cpu4";
-			};
+				user7 {
+					label = "v2m:green:user7";
+					gpios = <&v2m_led_gpios 6 0>;
+					linux,default-trigger = "cpu4";
+				};
 
-			user8 {
-				label = "v2m:green:user8";
-				gpios = <&v2m_led_gpios 7 0>;
-				linux,default-trigger = "cpu5";
+				user8 {
+					label = "v2m:green:user8";
+					gpios = <&v2m_led_gpios 7 0>;
+					linux,default-trigger = "cpu5";
+				};
 			};
-		};
 
-		mcc {
-			compatible = "arm,vexpress,config-bus";
-			arm,vexpress,config-bridge = <&v2m_sysreg>;
+			mcc {
+				compatible = "arm,vexpress,config-bus";
+				arm,vexpress,config-bridge = <&v2m_sysreg>;
 
-			oscclk0 {
-				/* MCC static memory clock */
-				compatible = "arm,vexpress-osc";
-				arm,vexpress-sysreg,func = <1 0>;
-				freq-range = <25000000 60000000>;
-				#clock-cells = <0>;
-				clock-output-names = "v2m:oscclk0";
-			};
+				oscclk0 {
+					/* MCC static memory clock */
+					compatible = "arm,vexpress-osc";
+					arm,vexpress-sysreg,func = <1 0>;
+					freq-range = <25000000 60000000>;
+					#clock-cells = <0>;
+					clock-output-names = "v2m:oscclk0";
+				};
 
-			v2m_oscclk1: oscclk1 {
-				/* CLCD clock */
-				compatible = "arm,vexpress-osc";
-				arm,vexpress-sysreg,func = <1 1>;
-				freq-range = <23750000 65000000>;
-				#clock-cells = <0>;
-				clock-output-names = "v2m:oscclk1";
-			};
+				v2m_oscclk1: oscclk1 {
+					/* CLCD clock */
+					compatible = "arm,vexpress-osc";
+					arm,vexpress-sysreg,func = <1 1>;
+					freq-range = <23750000 65000000>;
+					#clock-cells = <0>;
+					clock-output-names = "v2m:oscclk1";
+				};
 
-			v2m_oscclk2: oscclk2 {
-				/* IO FPGA peripheral clock */
-				compatible = "arm,vexpress-osc";
-				arm,vexpress-sysreg,func = <1 2>;
-				freq-range = <24000000 24000000>;
-				#clock-cells = <0>;
-				clock-output-names = "v2m:oscclk2";
-			};
+				v2m_oscclk2: oscclk2 {
+					/* IO FPGA peripheral clock */
+					compatible = "arm,vexpress-osc";
+					arm,vexpress-sysreg,func = <1 2>;
+					freq-range = <24000000 24000000>;
+					#clock-cells = <0>;
+					clock-output-names = "v2m:oscclk2";
+				};
 
-			volt-vio {
-				/* Logic level voltage */
-				compatible = "arm,vexpress-volt";
-				arm,vexpress-sysreg,func = <2 0>;
-				regulator-name = "VIO";
-				regulator-always-on;
-				label = "VIO";
-			};
+				volt-vio {
+					/* Logic level voltage */
+					compatible = "arm,vexpress-volt";
+					arm,vexpress-sysreg,func = <2 0>;
+					regulator-name = "VIO";
+					regulator-always-on;
+					label = "VIO";
+				};
 
-			temp-mcc {
-				/* MCC internal operating temperature */
-				compatible = "arm,vexpress-temp";
-				arm,vexpress-sysreg,func = <4 0>;
-				label = "MCC";
-			};
+				temp-mcc {
+					/* MCC internal operating temperature */
+					compatible = "arm,vexpress-temp";
+					arm,vexpress-sysreg,func = <4 0>;
+					label = "MCC";
+				};
 
-			reset {
-				compatible = "arm,vexpress-reset";
-				arm,vexpress-sysreg,func = <5 0>;
-			};
+				reset {
+					compatible = "arm,vexpress-reset";
+					arm,vexpress-sysreg,func = <5 0>;
+				};
 
-			muxfpga {
-				compatible = "arm,vexpress-muxfpga";
-				arm,vexpress-sysreg,func = <7 0>;
-			};
+				muxfpga {
+					compatible = "arm,vexpress-muxfpga";
+					arm,vexpress-sysreg,func = <7 0>;
+				};
 
-			shutdown {
-				compatible = "arm,vexpress-shutdown";
-				arm,vexpress-sysreg,func = <8 0>;
-			};
+				shutdown {
+					compatible = "arm,vexpress-shutdown";
+					arm,vexpress-sysreg,func = <8 0>;
+				};
 
-			reboot {
-				compatible = "arm,vexpress-reboot";
-				arm,vexpress-sysreg,func = <9 0>;
-			};
+				reboot {
+					compatible = "arm,vexpress-reboot";
+					arm,vexpress-sysreg,func = <9 0>;
+				};
 
-			dvimode {
-				compatible = "arm,vexpress-dvimode";
-				arm,vexpress-sysreg,func = <11 0>;
+				dvimode {
+					compatible = "arm,vexpress-dvimode";
+					arm,vexpress-sysreg,func = <11 0>;
+				};
 			};
 		};
 	};
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
index a8ac4e2ed290..3971427a105b 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
@@ -9,6 +9,7 @@ 
  */
 
 /dts-v1/;
+#include "vexpress-v2m-rs1.dtsi"
 
 / {
 	model = "V2P-CA15";
@@ -278,8 +279,6 @@ 
 				<0 0 40 &gic 0 40 4>,
 				<0 0 41 &gic 0 41 4>,
 				<0 0 42 &gic 0 42 4>;
-
-		/include/ "vexpress-v2m-rs1.dtsi"
 	};
 
 	site2: hsb@40000000 {
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
index a4c7713edfcd..65a874ea66be 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
@@ -9,6 +9,7 @@ 
  */
 
 /dts-v1/;
+#include "vexpress-v2m-rs1.dtsi"
 
 / {
 	model = "V2P-CA15_CA7";
@@ -584,7 +585,7 @@ 
 		};
 	};
 
-	smb@8000000 {
+	smb: smb@8000000 {
 		compatible = "simple-bus";
 
 		#address-cells = <2>;
@@ -641,8 +642,6 @@ 
 				<0 0 40 &gic 0 40 4>,
 				<0 0 41 &gic 0 41 4>,
 				<0 0 42 &gic 0 42 4>;
-
-		/include/ "vexpress-v2m-rs1.dtsi"
 	};
 
 	site2: hsb@40000000 {
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
index 32f1906ffecf..e5b4a7570a01 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
@@ -9,6 +9,7 @@ 
  */
 
 /dts-v1/;
+#include "vexpress-v2m-rs1.dtsi"
 
 / {
 	model = "V2P-CA5s";
@@ -191,7 +192,7 @@ 
 		};
 	};
 
-	smb@8000000 {
+	smb: smb@8000000 {
 		compatible = "simple-bus";
 
 		#address-cells = <2>;
@@ -248,8 +249,6 @@ 
 				<0 0 40 &gic 0 40 4>,
 				<0 0 41 &gic 0 41 4>,
 				<0 0 42 &gic 0 42 4>;
-
-		/include/ "vexpress-v2m-rs1.dtsi"
 	};
 
 	site2: hsb@40000000 {
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
index 56308c1c0208..7ec3dac1f61d 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
@@ -9,6 +9,7 @@ 
  */
 
 /dts-v1/;
+#include "vexpress-v2m.dtsi"
 
 / {
 	model = "V2P-CA9";
@@ -301,7 +302,7 @@ 
 		};
 	};
 
-	smb@4000000 {
+	smb: smb@4000000 {
 		compatible = "simple-bus";
 
 		#address-cells = <2>;
@@ -357,8 +358,6 @@ 
 				<0 0 40 &gic 0 40 4>,
 				<0 0 41 &gic 0 41 4>,
 				<0 0 42 &gic 0 42 4>;
-
-		/include/ "vexpress-v2m.dtsi"
 	};
 
 	site2: hsb@e0000000 {
diff --git a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
index 1c9eadc2d71e..38880380e0fa 100644
--- a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
+++ b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
@@ -13,6 +13,7 @@ 
 /dts-v1/;
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "vexpress-v2m-rs1.dtsi"
 
 / {
 	model = "V2F-1XV7 Cortex-A53x2 SMM";
@@ -129,7 +130,7 @@ 
 		};
 	};
 
-	smb@8000000 {
+	smb: smb@8000000 {
 		compatible = "simple-bus";
 
 		#address-cells = <2>;
@@ -186,7 +187,5 @@ 
 				<0 0 40 &gic GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
 				<0 0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
 				<0 0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-
-		/include/ "vexpress-v2m-rs1.dtsi"
 	};
 };