From patchwork Thu Jun 14 07:36:50 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ivan Khoronzhuk X-Patchwork-Id: 138529 Delivered-To: patch@linaro.org Received: by 2002:a2e:970d:0:0:0:0:0 with SMTP id r13-v6csp1770842lji; Thu, 14 Jun 2018 00:38:24 -0700 (PDT) X-Google-Smtp-Source: ADUXVKLp6rtqaWL+NVUVNl6H6Ybpv/CdoDpaH2ZT5xckMsui3dKvf6vBf/o2nQUd7kPejk9knYKu X-Received: by 2002:a17:902:988c:: with SMTP id s12-v6mr1742295plp.304.1528961904027; Thu, 14 Jun 2018 00:38:24 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1528961904; cv=none; d=google.com; s=arc-20160816; b=fZ8cVdcyBokr2A5aQ+isaC8u8pyzv5sDdeJsM9oA+Bjl4iFZby6ZRdOIeP4yErLS/r fIPdEZkjGJTJ9E7XG/CIu4bf4i2BuDVndPgbxSQM+zdmpdu+TEjd4ERGXEhvBKFRCWSw Ua+CAdtltooRbgjF+cv6ymDuumOOYDX9KQ1EOIQQwtxOUXiId3vXXT7vdDUdmjW51ntL F9wzEW5J+jhZFYduY0uixfnIpCxYblYH62vSyKKKTHmM2jLWcRxywW5Qfzz1YDG7oaqn 9P1yTC2845tegVeeOdSubKmLklGfd/ejdTvmzDERKLJqjwVrAiWvI8Hm59mlXeoo9mOC tzeQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:references:in-reply-to:message-id:date :subject:cc:to:from:dkim-signature:arc-authentication-results; bh=GB3qgIFFSvYbA1NNL1+hMvHlZw8giCP+jOsPxlZzIZA=; b=SJKW9XsrjCW+6QlKR9/Lz3ANV7xDLwW3hNG9DdSRe/4Gsg4uH+C05SWLoi0FljwxJ6 /EL9Qc5JyCN7fYwjvXJHmc0BXNz2KAPSFxg/R811ckaeXGxenOkP9A3uJrxkKB3F+IPB iMevpIarjkx/46FvtAS8uGYwS8xtLJRbCibaMIgSFcMLzn9EMHkfW7yUhcGQZ4S2BSG0 /jM8x/xvOvZwwDMO8twTX0qyZJuv0Q4VYHiXy2TMVNzCXNkz8z1pmTyv29DGWacTwTip l1BYeHfYS/kL9IdNoiI9fjTOV03DtcuT/DB65MdraHz9MmJzuP4TVAsE3/4Gxc0tthiZ sozQ== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=Ua0KhcRt; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id v65-v6si4883728pfb.324.2018.06.14.00.38.23; Thu, 14 Jun 2018 00:38:24 -0700 (PDT) Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=Ua0KhcRt; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754853AbeFNHiV (ORCPT + 30 others); Thu, 14 Jun 2018 03:38:21 -0400 Received: from mail-lf0-f66.google.com ([209.85.215.66]:44088 "EHLO mail-lf0-f66.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754758AbeFNHhU (ORCPT ); Thu, 14 Jun 2018 03:37:20 -0400 Received: by mail-lf0-f66.google.com with SMTP id 36-v6so7818611lfr.11 for ; Thu, 14 Jun 2018 00:37:19 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=GB3qgIFFSvYbA1NNL1+hMvHlZw8giCP+jOsPxlZzIZA=; b=Ua0KhcRtPJmw8uQ6I3W24N2u10RR1kxXXvwaS0BVw3wP4RRTVrLhdWwdHHWyP5Bez2 Sn6qZcGWpKqUGmjY571CMjg5Mkt/rJmIJQkSRnxgFHyJUw1cdGSkkNBksA0kIuIPI3fP FCmvn1oeKLug3mFt/v4y1xbPhU2wFizl0ulz0= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=GB3qgIFFSvYbA1NNL1+hMvHlZw8giCP+jOsPxlZzIZA=; b=DfJwHb7Na0B1TEKhu4jzjlsZcB26pM6XH2u438uBLDPAA/CrthQcKxQUcVyoumkzkF L8L8F2RbLbMSmT47KXanop5w4ibtPGeSA2dglGwgAl3adFex599s9pCoyHYq6msfKE4v DIQVy2rRm1kjOEPihF1nVHi1Z8WpeJJOH0OeVpDof2xHHiNC0zXfGASuC2ymRpegfzs6 7vpQi1Th71v0z+egQT0FmVPZ57OeWynvGH6kt6nYWNVTc4sxsxFmiXcIg+21WTGWJQsy 8qMl5l+3L2eXw1hndApJfZHuWw0DxXx5iAol+qYXL5Aft4RtoY0WU9ayy8RKJHof/kee CWZQ== X-Gm-Message-State: APt69E3CcK6Hc9xG7gn/r5Mc4il4svEv/77PiPcaJKAYl0F0w4eAfL6E CWHTmmrHFLHaaD3lvDkLryT2Xg== X-Received: by 2002:a19:dd0b:: with SMTP id u11-v6mr5376238lfg.100.1528961838145; Thu, 14 Jun 2018 00:37:18 -0700 (PDT) Received: from localhost.localdomain (59-201-94-178.pool.ukrtel.net. [178.94.201.59]) by smtp.gmail.com with ESMTPSA id a195-v6sm957597lfe.44.2018.06.14.00.37.16 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Thu, 14 Jun 2018 00:37:17 -0700 (PDT) From: Ivan Khoronzhuk To: grygorii.strashko@ti.com, davem@davemloft.net Cc: corbet@lwn.net, akpm@linux-foundation.org, netdev@vger.kernel.org, linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org, vinicius.gomes@intel.com, henrik@austad.us, jesus.sanchez-palencia@intel.com, ilias.apalodimas@linaro.org, p-varis@ti.com, spatton@ti.com, francois.ozog@linaro.org, yogeshs@ti.com, nsekhar@ti.com, andrew@lunn.ch, Ivan Khoronzhuk Subject: [PATCH v2 net-next 6/6] Documentation: networking: cpsw: add MQPRIO & CBS offload examples Date: Thu, 14 Jun 2018 10:36:50 +0300 Message-Id: <20180614073650.29659-7-ivan.khoronzhuk@linaro.org> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20180614073650.29659-1-ivan.khoronzhuk@linaro.org> References: <20180614073650.29659-1-ivan.khoronzhuk@linaro.org> Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This document describes MQPRIO and CBS Qdisc offload configuration for cpsw driver based on examples. It potentially can be used in audio video bridging (AVB) and time sensitive networking (TSN). Signed-off-by: Ivan Khoronzhuk --- Documentation/networking/ti-cpsw.txt | 540 +++++++++++++++++++++++++++ 1 file changed, 540 insertions(+) create mode 100644 Documentation/networking/ti-cpsw.txt -- 2.17.1 diff --git a/Documentation/networking/ti-cpsw.txt b/Documentation/networking/ti-cpsw.txt new file mode 100644 index 000000000000..f5d58f502e52 --- /dev/null +++ b/Documentation/networking/ti-cpsw.txt @@ -0,0 +1,540 @@ +* Texas Instruments CPSW ethernet driver + +Multiqueue & CBS & MQPRIO +===================================================================== +===================================================================== + +The cpsw has 3 CBS shapers for each external ports. This document +describes MQPRIO and CBS Qdisc offload configuration for cpsw driver +based on examples. It potentially can be used in audio video bridging +(AVB) and time sensitive networking (TSN). + +The following examples was tested on AM572x EVM and BBB boards. + +Test setup +========== + +Under consideration two examples with AM52xx EVM running cpsw driver +in dual_emac mode. + +Several prerequisites: +- TX queues must be rated starting from txq0 that has highest priority +- Traffic classes are used starting from 0, that has highest priority +- CBS shapers should be used with rated queues +- The bandwidth for CBS shapers has to be set a little bit more then + potential incoming rate, thus, rate of all incoming tx queues has + to be a little less +- Real rates can differ, due to discreetness +- Map skb-priority to txq is not enough, also skb-priority to l2 prio + map has to be created with ip or vconfig tool +- Any l2/socket prio (0 - 7) for classes can be used, but for + simplicity default values are used: 3 and 2 +- only 2 classes tested: A and B, but checked and can work with more, + maximum allowed 4, but only for 3 rate can be set. + +Test setup for examples +======================= + +-------------------------------+ + |--+ | + | | Workstation0 | + |E | MAC 18:03:73:66:87:42 | ++-----------------------------+ +--|t | | +| | 1 | E | | |h |./tsn_listener -d \ | +| Target board: | 0 | t |--+ |0 | 18:03:73:66:87:42 -i eth0 \| +| AM572x EVM | 0 | h | | | -s 1500 | +| | 0 | 0 | |--+ | +| Only 2 classes: |Mb +---| +-------------------------------+ +| class A, class B | | +| | +---| +-------------------------------+ +| | 1 | E | |--+ | +| | 0 | t | | | Workstation1 | +| | 0 | h |--+ |E | MAC 20:cf:30:85:7d:fd | +| |Mb | 1 | +--|t | | ++-----------------------------+ |h |./tsn_listener -d \ | + |0 | 20:cf:30:85:7d:fd -i eth0 \| + | | -s 1500 | + |--+ | + +-------------------------------+ + +********************************************************************* +********************************************************************* +********************************************************************* +Example 1: One port tx AVB configuration scheme for target board +---------------------------------------------------------------------- +(prints and scheme for AM52xx evm, applicable for single port boards) + +tc - traffic class +txq - transmit queue +p - priority +f - fifo (cpsw fifo) +S - shaper configured + ++------------------------------------------------------------------+ u +| +---------------+ +---------------+ +------+ +------+ | s +| | | | | | | | | | e +| | App 1 | | App 2 | | Apps | | Apps | | r +| | Class A | | Class B | | Rest | | Rest | | +| | Eth0 | | Eth0 | | Eth0 | | Eth1 | | s +| | VLAN100 | | VLAN100 | | | | | | | | p +| | 40 Mb/s | | 20 Mb/s | | | | | | | | a +| | SO_PRIORITY=3 | | SO_PRIORITY=2 | | | | | | | | c +| | | | | | | | | | | | | | e +| +---|-----------+ +---|-----------+ +---|--+ +---|--+ | ++-----|------------------|------------------|--------|-------------+ + +-+ +------------+ | | + | | +-----------------+ +--+ + | | | | ++---|-------|-------------|-----------------------|----------------+ +| +----+ +----+ +----+ +----+ +----+ | +| | p3 | | p2 | | p1 | | p0 | | p0 | | k +| \ / \ / \ / \ / \ / | e +| \ / \ / \ / \ / \ / | r +| \/ \/ \/ \/ \/ | n +| | | | | | e +| | | +-----+ | | l +| | | | | | +| +----+ +----+ +----+ +----+ | s +| |tc0 | |tc1 | |tc2 | |tc0 | | p +| \ / \ / \ / \ / | a +| \ / \ / \ / \ / | c +| \/ \/ \/ \/ | e +| | | +-----+ | | +| | | | | | | +| | | | | | | +| | | | | | | +| +----+ +----+ +----+ +----+ +----+ | +| |txq0| |txq1| |txq2| |txq3| |txq4| | +| \ / \ / \ / \ / \ / | +| \ / \ / \ / \ / \ / | +| \/ \/ \/ \/ \/ | +| +-|------|------|------|--+ +--|--------------+ | +| | | | | | | Eth0.100 | | Eth1 | | ++---|------|------|------|------------------------|----------------+ + | | | | | + p p p p | + 3 2 0-1, 4-7 <- L2 priority | + | | | | | + | | | | | ++---|------|------|------|------------------------|----------------+ +| | | | | |----------+ | +| +----+ +----+ +----+ +----+ +----+ | +| |dma7| |dma6| |dma5| |dma4| |dma3| | +| \ / \ / \ / \ / \ / | c +| \S / \S / \ / \ / \ / | p +| \/ \/ \/ \/ \/ | s +| | | | +----- | | w +| | | | | | | +| | | | | | | d +| +----+ +----+ +----+p p+----+ | r +| | | | | | |o o| | | i +| | f3 | | f2 | | f0 |r r| f0 | | v +| |tc0 | |tc1 | |tc2 |t t|tc0 | | e +| \CBS / \CBS / \CBS /1 2\CBS / | r +| \S / \S / \ / \ / | +| \/ \/ \/ \/ | ++------------------------------------------------------------------+ +========================================Eth==========================> + +1) +// Add 4 tx queues, for interface Eth0, and 1 tx queue for Eth1 +$ ethtool -L eth0 rx 1 tx 5 +rx unmodified, ignoring + +2) +// Check if num of queues is set correctly: +$ ethtool -l eth0 +Channel parameters for eth0: +Pre-set maximums: +RX: 8 +TX: 8 +Other: 0 +Combined: 0 +Current hardware settings: +RX: 1 +TX: 5 +Other: 0 +Combined: 0 + +3) +// TX queues must be rated starting from 0, so set bws for tx0 and tx1 +// Set rates 40 and 20 Mb/s appropriately. +// Pay attention, real speed can differ a bit due to discreetness. +// Leave last 2 tx queues not rated. +$ echo 40 > /sys/class/net/eth0/queues/tx-0/tx_maxrate +$ echo 20 > /sys/class/net/eth0/queues/tx-1/tx_maxrate + +4) +// Check maximum rate of tx (cpdma) queues: +$ cat /sys/class/net/eth0/queues/tx-*/tx_maxrate +40 +20 +0 +0 +0 + +5) +// Map skb->priority to traffic class: +// 3pri -> tc0, 2pri -> tc1, (0,1,4-7)pri -> tc2 +// Map traffic class to transmit queue: +// tc0 -> txq0, tc1 -> txq1, tc2 -> (txq2, txq3) +$ tc qdisc replace dev eth0 handle 100: parent root mqprio num_tc 3 \ +map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 queues 1@0 1@1 2@2 hw 1 + +5a) +// As two interface sharing same set of tx queues, assign all traffic +// coming to interface Eth1 to separate queue in order to not mix it +// with traffic from interface Eth0, so use separate txq to send +// packets to Eth1, so all prio -> tc0 and tc0 -> txq4 +// Here hw 0, so here still default configuration for eth1 in hw +$ tc qdisc replace dev eth1 handle 100: parent root mqprio num_tc 1 \ +map 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 queues 1@4 hw 0 + +6) +// Check classes settings +$ tc -g class show dev eth0 ++---(100:ffe2) mqprio +| +---(100:3) mqprio +| +---(100:4) mqprio +| ++---(100:ffe1) mqprio +| +---(100:2) mqprio +| ++---(100:ffe0) mqprio + +---(100:1) mqprio + +$ tc -g class show dev eth1 ++---(100:ffe0) mqprio + +---(100:5) mqprio + +7) +// Set rate for class A - 41 Mbit (tc0, txq0) using CBS Qdisc +// Set it +1 Mb for reserve (important!) +// here only idle slope is important, others arg are ignored +// Pay attention, real speed can differ a bit due to discreetness +$ tc qdisc add dev eth0 parent 100:1 cbs locredit -1438 \ +hicredit 62 sendslope -959000 idleslope 41000 offload 1 +net eth0: set FIFO3 bw = 50 + +8) +// Set rate for class B - 21 Mbit (tc1, txq1) using CBS Qdisc: +// Set it +1 Mb for reserve (important!) +$ tc qdisc add dev eth0 parent 100:2 cbs locredit -1468 \ +hicredit 65 sendslope -979000 idleslope 21000 offload 1 +net eth0: set FIFO2 bw = 30 + +9) +// Create vlan 100 to map sk->priority to vlan qos +$ ip link add link eth0 name eth0.100 type vlan id 100 +8021q: 802.1Q VLAN Support v1.8 +8021q: adding VLAN 0 to HW filter on device eth0 +8021q: adding VLAN 0 to HW filter on device eth1 +net eth0: Adding vlanid 100 to vlan filter + +10) +// Map skb->priority to L2 prio, 1 to 1 +$ ip link set eth0.100 type vlan \ +egress 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 + +11) +// Check egress map for vlan 100 +$ cat /proc/net/vlan/eth0.100 +[...] +INGRESS priority mappings: 0:0 1:0 2:0 3:0 4:0 5:0 6:0 7:0 +EGRESS priority mappings: 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 + +12) +// Run your appropriate tools with socket option "SO_PRIORITY" +// to 3 for class A and/or to 2 for class B +// (I took at https://www.spinics.net/lists/netdev/msg460869.html) +./tsn_talker -d 18:03:73:66:87:42 -i eth0.100 -p3 -s 1500& +./tsn_talker -d 18:03:73:66:87:42 -i eth0.100 -p2 -s 1500& + +13) +// run your listener on workstation +// (I took at https://www.spinics.net/lists/netdev/msg460869.html) +./tsn_listener -d 18:03:73:66:87:42 -i enp5s0 -s 1500 +Receiving data rate: 39012 kbps +Receiving data rate: 39012 kbps +Receiving data rate: 39012 kbps +Receiving data rate: 39012 kbps +Receiving data rate: 39012 kbps +Receiving data rate: 39012 kbps +Receiving data rate: 39012 kbps +Receiving data rate: 39012 kbps +Receiving data rate: 39012 kbps +Receiving data rate: 39012 kbps +Receiving data rate: 39012 kbps +Receiving data rate: 39012 kbps +Receiving data rate: 39000 kbps + +14) +// Restore default configuration if needed +$ ip link del eth0.100 +$ tc qdisc del dev eth1 root +$ tc qdisc del dev eth0 root +net eth0: Prev FIFO2 is shaped +net eth0: set FIFO3 bw = 0 +net eth0: set FIFO2 bw = 0 +$ ethtool -L eth0 rx 1 tx 1 + +********************************************************************* +********************************************************************* +********************************************************************* +Example 2: Two port tx AVB configuration scheme for target board +---------------------------------------------------------------------- +(prints and scheme for AM52xx evm, for dual emac boards only) + ++------------------------------------------------------------------+ u +| +----------+ +----------+ +------+ +----------+ +----------+ | s +| | | | | | | | | | | | e +| | App 1 | | App 2 | | Apps | | App 3 | | App 4 | | r +| | Class A | | Class B | | Rest | | Class B | | Class A | | +| | Eth0 | | Eth0 | | | | | Eth1 | | Eth1 | | s +| | VLAN100 | | VLAN100 | | | | | VLAN100 | | VLAN100 | | p +| | 40 Mb/s | | 20 Mb/s | | | | | 10 Mb/s | | 30 Mb/s | | a +| | SO_PRI=3 | | SO_PRI=2 | | | | | SO_PRI=3 | | SO_PRI=2 | | c +| | | | | | | | | | | | | | | | | e +| +---|------+ +---|------+ +---|--+ +---|------+ +---|------+ | ++-----|-------------|-------------|---------|-------------|--------+ + +-+ +-------+ | +----------+ +----+ + | | +-------+------+ | | + | | | | | | ++---|-------|-------------|--------------|-------------|-------|---+ +| +----+ +----+ +----+ +----+ +----+ +----+ +----+ +----+ | +| | p3 | | p2 | | p1 | | p0 | | p0 | | p1 | | p2 | | p3 | | k +| \ / \ / \ / \ / \ / \ / \ / \ / | e +| \ / \ / \ / \ / \ / \ / \ / \ / | r +| \/ \/ \/ \/ \/ \/ \/ \/ | n +| | | | | | | | e +| | | +----+ +----+ | | | l +| | | | | | | | +| +----+ +----+ +----+ +----+ +----+ +----+ | s +| |tc0 | |tc1 | |tc2 | |tc2 | |tc1 | |tc0 | | p +| \ / \ / \ / \ / \ / \ / | a +| \ / \ / \ / \ / \ / \ / | c +| \/ \/ \/ \/ \/ \/ | e +| | | +-----+ +-----+ | | | +| | | | | | | | | | +| | | | | | | | | | +| | | | | E E | | | | | +| +----+ +----+ +----+ +----+ t t +----+ +----+ +----+ +----+ | +| |txq0| |txq1| |txq4| |txq5| h h |txq6| |txq7| |txq3| |txq2| | +| \ / \ / \ / \ / 0 1 \ / \ / \ / \ / | +| \ / \ / \ / \ / . . \ / \ / \ / \ / | +| \/ \/ \/ \/ 1 1 \/ \/ \/ \/ | +| +-|------|------|------|--+ 0 0 +-|------|------|------|--+ | +| | | | | | | 0 0 | | | | | | | ++---|------|------|------|---------------|------|------|------|----+ + | | | | | | | | + p p p p p p p p + 3 2 0-1, 4-7 <-L2 pri-> 0-1, 4-7 2 3 + | | | | | | | | + | | | | | | | | ++---|------|------|------|---------------|------|------|------|----+ +| | | | | | | | | | +| +----+ +----+ +----+ +----+ +----+ +----+ +----+ +----+ | +| |dma7| |dma6| |dma3| |dma2| |dma1| |dma0| |dma4| |dma5| | +| \ / \ / \ / \ / \ / \ / \ / \ / | c +| \S / \S / \ / \ / \ / \ / \S / \S / | p +| \/ \/ \/ \/ \/ \/ \/ \/ | s +| | | | +----- | | | | | w +| | | | | +----+ | | | | +| | | | | | | | | | d +| +----+ +----+ +----+p p+----+ +----+ +----+ | r +| | | | | | |o o| | | | | | | i +| | f3 | | f2 | | f0 |r CPSW r| f3 | | f2 | | f0 | | v +| |tc0 | |tc1 | |tc2 |t t|tc0 | |tc1 | |tc2 | | e +| \CBS / \CBS / \CBS /1 2\CBS / \CBS / \CBS / | r +| \S / \S / \ / \S / \S / \ / | +| \/ \/ \/ \/ \/ \/ | ++------------------------------------------------------------------+ +========================================Eth==========================> + +1) +// Add 8 tx queues, for interface Eth0, but they are common, so are accessed +// by two interfaces Eth0 and Eth1. +$ ethtool -L eth1 rx 1 tx 8 +rx unmodified, ignoring + +2) +// Check if num of queues is set correctly: +$ ethtool -l eth0 +Channel parameters for eth0: +Pre-set maximums: +RX: 8 +TX: 8 +Other: 0 +Combined: 0 +Current hardware settings: +RX: 1 +TX: 8 +Other: 0 +Combined: 0 + +3) +// TX queues must be rated starting from 0, so set bws for tx0 and tx1 for Eth0 +// and for tx2 and tx3 for Eth1. That is, rates 40 and 20 Mb/s appropriately +// for Eth0 and 30 and 10 Mb/s for Eth1. +// Real speed can differ a bit due to discreetness +// Leave last 4 tx queues as not rated +$ echo 40 > /sys/class/net/eth0/queues/tx-0/tx_maxrate +$ echo 20 > /sys/class/net/eth0/queues/tx-1/tx_maxrate +$ echo 30 > /sys/class/net/eth1/queues/tx-2/tx_maxrate +$ echo 10 > /sys/class/net/eth1/queues/tx-3/tx_maxrate + +4) +// Check maximum rate of tx (cpdma) queues: +$ cat /sys/class/net/eth0/queues/tx-*/tx_maxrate +40 +20 +30 +10 +0 +0 +0 +0 + +5) +// Map skb->priority to traffic class for Eth0: +// 3pri -> tc0, 2pri -> tc1, (0,1,4-7)pri -> tc2 +// Map traffic class to transmit queue: +// tc0 -> txq0, tc1 -> txq1, tc2 -> (txq4, txq5) +$ tc qdisc replace dev eth0 handle 100: parent root mqprio num_tc 3 \ +map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 queues 1@0 1@1 2@4 hw 1 + +6) +// Check classes settings +$ tc -g class show dev eth0 ++---(100:ffe2) mqprio +| +---(100:5) mqprio +| +---(100:6) mqprio +| ++---(100:ffe1) mqprio +| +---(100:2) mqprio +| ++---(100:ffe0) mqprio + +---(100:1) mqprio + +7) +// Set rate for class A - 41 Mbit (tc0, txq0) using CBS Qdisc for Eth0 +// here only idle slope is important, others ignored +// Real speed can differ a bit due to discreetness +$ tc qdisc add dev eth0 parent 100:1 cbs locredit -1470 \ +hicredit 62 sendslope -959000 idleslope 41000 offload 1 +net eth0: set FIFO3 bw = 50 + +8) +// Set rate for class B - 21 Mbit (tc1, txq1) using CBS Qdisc for Eth0 +$ tc qdisc add dev eth0 parent 100:2 cbs locredit -1470 \ +hicredit 65 sendslope -979000 idleslope 21000 offload 1 +net eth0: set FIFO2 bw = 30 + +9) +// Create vlan 100 to map sk->priority to vlan qos for Eth0 +$ ip link add link eth0 name eth0.100 type vlan id 100 +net eth0: Adding vlanid 100 to vlan filter + +10) +// Map skb->priority to L2 prio for Eth0.100, one to one +$ ip link set eth0.100 type vlan \ +egress 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 + +11) +// Check egress map for vlan 100 +$ cat /proc/net/vlan/eth0.100 +[...] +INGRESS priority mappings: 0:0 1:0 2:0 3:0 4:0 5:0 6:0 7:0 +EGRESS priority mappings: 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 + +12) +// Map skb->priority to traffic class for Eth1: +// 3pri -> tc0, 2pri -> tc1, (0,1,4-7)pri -> tc2 +// Map traffic class to transmit queue: +// tc0 -> txq2, tc1 -> txq3, tc2 -> (txq6, txq7) +$ tc qdisc replace dev eth1 handle 100: parent root mqprio num_tc 3 \ +map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 queues 1@2 1@3 2@6 hw 1 + +13) +// Check classes settings +$ tc -g class show dev eth1 ++---(100:ffe2) mqprio +| +---(100:7) mqprio +| +---(100:8) mqprio +| ++---(100:ffe1) mqprio +| +---(100:4) mqprio +| ++---(100:ffe0) mqprio + +---(100:3) mqprio + +14) +// Set rate for class A - 31 Mbit (tc0, txq2) using CBS Qdisc for Eth1 +// here only idle slope is important, others ignored +// Set it +1 Mb for reserve (important!) +$ tc qdisc add dev eth1 parent 100:3 cbs locredit -1453 \ +hicredit 47 sendslope -969000 idleslope 31000 offload 1 +net eth1: set FIFO3 bw = 31 + +15) +// Set rate for class B - 11 Mbit (tc1, txq3) using CBS Qdisc for Eth1 +// Set it +1 Mb for reserve (important!) +$ tc qdisc add dev eth1 parent 100:4 cbs locredit -1483 \ +hicredit 34 sendslope -989000 idleslope 11000 offload 1 +net eth1: set FIFO2 bw = 11 + +16) +// Create vlan 100 to map sk->priority to vlan qos for Eth1 +$ ip link add link eth1 name eth1.100 type vlan id 100 +net eth1: Adding vlanid 100 to vlan filter + +17) +// Map skb->priority to L2 prio for Eth1.100, one to one +$ ip link set eth1.100 type vlan \ +egress 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 + +18) +// Check egress map for vlan 100 +$ cat /proc/net/vlan/eth1.100 +[...] +INGRESS priority mappings: 0:0 1:0 2:0 3:0 4:0 5:0 6:0 7:0 +EGRESS priority mappings: 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 + +19) +// Run appropriate tools with socket option "SO_PRIORITY" to 3 +// for class A and to 2 for class B. For both interfaces +./tsn_talker -d 18:03:73:66:87:42 -i eth0.100 -p2 -s 1500& +./tsn_talker -d 18:03:73:66:87:42 -i eth0.100 -p3 -s 1500& +./tsn_talker -d 20:cf:30:85:7d:fd -i eth1.100 -p2 -s 1500& +./tsn_talker -d 20:cf:30:85:7d:fd -i eth1.100 -p3 -s 1500& + +20) +// run your listeners on workstations +// (I took at https://www.spinics.net/lists/netdev/msg460869.html) +./tsn_listener -d 18:03:73:66:87:42 -i enp5s0 -s 1500 +Receiving data rate: 39012 kbps +Receiving data rate: 39012 kbps +Receiving data rate: 39012 kbps +Receiving data rate: 39012 kbps +Receiving data rate: 39012 kbps +Receiving data rate: 39012 kbps +Receiving data rate: 39012 kbps +Receiving data rate: 39012 kbps +Receiving data rate: 39012 kbps +Receiving data rate: 39012 kbps +Receiving data rate: 39012 kbps +Receiving data rate: 39012 kbps +Receiving data rate: 39000 kbps + +21) +// Restore default configuration if needed +$ ip link del eth1.100 +$ ip link del eth0.100 +$ tc qdisc del dev eth1 root +net eth1: Prev FIFO2 is shaped +net eth1: set FIFO3 bw = 0 +net eth1: set FIFO2 bw = 0 +$ tc qdisc del dev eth0 root +net eth0: Prev FIFO2 is shaped +net eth0: set FIFO3 bw = 0 +net eth0: set FIFO2 bw = 0 +$ ethtool -L eth0 rx 1 tx 1