[RESEND,1/3] ARM: dts: keystone-k2g-evm: Add "vqmmc-supply" property for mmc0/mmc1

Message ID 20180622101617.11157-2-kishon@ti.com
State New
Headers show
Series
  • [RESEND,1/3] ARM: dts: keystone-k2g-evm: Add "vqmmc-supply" property for mmc0/mmc1
Related show

Commit Message

Kishon Vijay Abraham I June 22, 2018, 10:16 a.m.
Add "vqmmc-supply" property for mmc0/mmc1 to indicate the supply connected
to the IO lines. Also add dt node for ldo1 regulator required for mmc1
vqmmc-supply.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

---
 arch/arm/boot/dts/keystone-k2g-evm.dts | 10 ++++++++++
 1 file changed, 10 insertions(+)

-- 
2.17.1

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch

diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts
index 154fdd7a7022..ba030c496f51 100644
--- a/arch/arm/boot/dts/keystone-k2g-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2g-evm.dts
@@ -37,6 +37,14 @@ 
 		regulator-max-microvolt = <3300000>;
 		regulator-always-on;
 	};
+
+	vcc1v8_ldo1_reg: fixedregulator-vcc1v8-ldo1 {
+		compatible = "regulator-fixed";
+		regulator-name = "ldo1";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
 };
 
 &k2g_pinctrl {
@@ -144,6 +152,7 @@ 
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&vcc3v3_dcin_reg>;
+	vqmmc-supply = <&vcc3v3_dcin_reg>;
 	cd-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
@@ -152,6 +161,7 @@ 
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
 	vmmc-supply = <&vcc3v3_dcin_reg>; /* VCC3V3_EMMC is connected to VCC3V3_DCIN */
+	vqmmc-supply = <&vcc1v8_ldo1_reg>;
 	ti,non-removable;
 	status = "okay";
 };