Applied "ASoC: Intel: bytcr_rt5651: Remove IN2 input mappings" to the asoc tree

Message ID
State Accepted
Commit fcdf1391caa6f7f01de56eea63e070555771fac7
Headers show
  • Applied "ASoC: Intel: bytcr_rt5651: Remove IN2 input mappings" to the asoc tree
Related show

Commit Message

Mark Brown June 27, 2018, 11:31 a.m.
The patch

   ASoC: Intel: bytcr_rt5651: Remove IN2 input mappings

has been applied to the asoc tree at 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.


From fcdf1391caa6f7f01de56eea63e070555771fac7 Mon Sep 17 00:00:00 2001
From: Hans de Goede <>

Date: Sun, 24 Jun 2018 16:06:29 +0200
Subject: [PATCH] ASoC: Intel: bytcr_rt5651: Remove IN2 input mappings

BYT_RT5651_IN2_MAP was introduced in commit 39712db878a4 ("SoC: intel: byt:
Introduce new custom IN2 map"), uses in commit 2fe30129b0a6 ("ASoC: intel:
byt: Enable IN2 map quirk for a KIANO laptop"), only to be replaced by a
new BYT_RT5651_IN1_IN2_MAP quirk in commit ea261bd02a67 ("ASoC: intel:
byt: Introduce new map for dual mics") quickly afterwards, because the
KIANO laptop has 2 internal mics on IN1 and IN2 and the headset mic is
not in IN1 where the BYT_RT5651_IN2_MAP maps it, but on IN3.

Now that the KIANO quirk entry uses BYT_RT5651_IN1_IN2_MAP, there are no
users of BYT_RT5651_IN2_MAP left. This makes sense since the headset mic
seems to always be connected to IN3, so BYT_RT5651_IN2_MAP is not useful.

To deal with BYT_RT5651_IN2_MAP wrongly mapping the headset mic to IN1,
BYT_RT5651_IN2_HS_IN3_MAP was added in commit f026e0631780 ("ASoC: Intel:
bytcr_rt5651: Add new IN2_HS_IN3 input map and a quirk using it"). This
was based on the assumption then some devices have the internal mic
connected to IN2 only. Further testing has shown that this is wrong and the
internal mic is always connected to IN1 and sometimes to both IN1 and IN2.

TL;DR: Both BYT_RT5651_IN2_MAP and BYT_RT5651_IN2_HS_IN3_MAP are based on
on wrong assumptions from the past and are no longer useful now, so they
can both be removed.

Signed-off-by: Hans de Goede <>

Reviewed-by: Pierre-Louis Bossart <>

Signed-off-by: Mark Brown <>

 sound/soc/intel/boards/bytcr_rt5651.c | 30 ++-------------------------
 1 file changed, 2 insertions(+), 28 deletions(-)


Alsa-devel mailing list


diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c
index 7cc6e36b7c47..b8ca7137d8b2 100644
--- a/sound/soc/intel/boards/bytcr_rt5651.c
+++ b/sound/soc/intel/boards/bytcr_rt5651.c
@@ -40,10 +40,8 @@ 
 enum {
-	BYT_RT5651_IN2_MAP,
-	BYT_RT5651_IN2_HS_IN3_MAP,
 enum {
@@ -100,14 +98,10 @@  static void log_quirks(struct device *dev)
 		dev_info(dev, "quirk DMIC_MAP enabled");
 	if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN1_MAP)
 		dev_info(dev, "quirk IN1_MAP enabled");
-	if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN2_MAP)
-		dev_info(dev, "quirk IN2_MAP enabled");
 	if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN1_IN2_MAP)
 		dev_info(dev, "quirk IN1_IN2_MAP enabled");
 	if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN1_HS_IN3_MAP)
 		dev_info(dev, "quirk IN1_HS_IN3_MAP enabled");
-	if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN2_HS_IN3_MAP)
-		dev_info(dev, "quirk IN2_HS_IN3_MAP enabled");
 	if (BYT_RT5651_JDSRC(byt_rt5651_quirk)) {
 		dev_info(dev, "quirk realtek,jack-detect-source %ld\n",
@@ -256,12 +250,6 @@  static const struct snd_soc_dapm_route byt_rt5651_intmic_in1_map[] = {
 	{"IN2P", NULL, "Headset Mic"},
-static const struct snd_soc_dapm_route byt_rt5651_intmic_in2_map[] = {
-	{"Internal Mic", NULL, "micbias1"},
-	{"IN1P", NULL, "Headset Mic"},
-	{"IN2P", NULL, "Internal Mic"},
 static const struct snd_soc_dapm_route byt_rt5651_intmic_in1_in2_map[] = {
 	{"Internal Mic", NULL, "micbias1"},
 	{"IN1P", NULL, "Internal Mic"},
@@ -275,12 +263,6 @@  static const struct snd_soc_dapm_route byt_rt5651_intmic_in1_hs_in3_map[] = {
 	{"IN3P", NULL, "Headset Mic"},
-static const struct snd_soc_dapm_route byt_rt5651_intmic_in2_hs_in3_map[] = {
-	{"Internal Mic", NULL, "micbias1"},
-	{"IN2P", NULL, "Internal Mic"},
-	{"IN3P", NULL, "Headset Mic"},
 static const struct snd_soc_dapm_route byt_rt5651_ssp0_aif1_map[] = {
 	{"ssp0 Tx", NULL, "modem_out"},
 	{"modem_in", NULL, "ssp0 Rx"},
@@ -462,10 +444,6 @@  static int byt_rt5651_init(struct snd_soc_pcm_runtime *runtime)
 		custom_map = byt_rt5651_intmic_in1_map;
 		num_routes = ARRAY_SIZE(byt_rt5651_intmic_in1_map);
-	case BYT_RT5651_IN2_MAP:
-		custom_map = byt_rt5651_intmic_in2_map;
-		num_routes = ARRAY_SIZE(byt_rt5651_intmic_in2_map);
-		break;
 	case BYT_RT5651_IN1_IN2_MAP:
 		custom_map = byt_rt5651_intmic_in1_in2_map;
 		num_routes = ARRAY_SIZE(byt_rt5651_intmic_in1_in2_map);
@@ -474,10 +452,6 @@  static int byt_rt5651_init(struct snd_soc_pcm_runtime *runtime)
 		custom_map = byt_rt5651_intmic_in1_hs_in3_map;
 		num_routes = ARRAY_SIZE(byt_rt5651_intmic_in1_hs_in3_map);
-	case BYT_RT5651_IN2_HS_IN3_MAP:
-		custom_map = byt_rt5651_intmic_in2_hs_in3_map;
-		num_routes = ARRAY_SIZE(byt_rt5651_intmic_in2_hs_in3_map);
-		break;
 		custom_map = byt_rt5651_intmic_dmic_map;
 		num_routes = ARRAY_SIZE(byt_rt5651_intmic_dmic_map);
@@ -723,9 +697,9 @@  struct acpi_chan_package {   /* ACPICA seems to require 64 bit integers */
 static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
 	const char * const intmic_name[] =
-		{ "dmic", "in1", "in2", "in12", "in1", "in2" };
+		{ "dmic", "in1", "in12", "in1" };
 	const char * const hsmic_name[] =
-		{  "in2", "in2", "in1",  "in3", "in3", "in3" };
+		{  "in2", "in2", "in3", "in3" };
 	struct byt_rt5651_private *priv;
 	struct snd_soc_acpi_mach *mach;
 	const char *i2c_name = NULL;