[v7,1/2] media: ov2680: dt: Add bindings for OV2680

Message ID 20180703140803.19580-2-rui.silva@linaro.org
State New
Headers show
Series
  • media: Introduce Omnivision OV2680 driver
Related show

Commit Message

Rui Miguel Silva July 3, 2018, 2:08 p.m.
Add device tree binding documentation for the OV2680 camera sensor.

CC: devicetree@vger.kernel.org
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>

---
 .../devicetree/bindings/media/i2c/ov2680.txt  | 46 +++++++++++++++++++
 1 file changed, 46 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/ov2680.txt

-- 
2.18.0

Comments

Rob Herring July 3, 2018, 4:27 p.m. | #1
On Tue, Jul 03, 2018 at 03:08:02PM +0100, Rui Miguel Silva wrote:
> Add device tree binding documentation for the OV2680 camera sensor.

> 

> CC: devicetree@vger.kernel.org

> Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>

> ---

>  .../devicetree/bindings/media/i2c/ov2680.txt  | 46 +++++++++++++++++++

>  1 file changed, 46 insertions(+)

>  create mode 100644 Documentation/devicetree/bindings/media/i2c/ov2680.txt


Please add acks/reviews when posting new versions.

Rob

Patch

diff --git a/Documentation/devicetree/bindings/media/i2c/ov2680.txt b/Documentation/devicetree/bindings/media/i2c/ov2680.txt
new file mode 100644
index 000000000000..11e925ed9dad
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ov2680.txt
@@ -0,0 +1,46 @@ 
+* Omnivision OV2680 MIPI CSI-2 sensor
+
+Required Properties:
+- compatible: should be "ovti,ov2680".
+- clocks: reference to the xvclk input clock.
+- clock-names: should be "xvclk".
+- DOVDD-supply: Digital I/O voltage supply.
+- DVDD-supply: Digital core voltage supply.
+- AVDD-supply: Analog voltage supply.
+
+Optional Properties:
+- reset-gpios: reference to the GPIO connected to the powerdown/reset pin,
+               if any. This is an active low signal to the OV2680.
+
+The device node must contain one 'port' child node for its digital output
+video port, and this port must have a single endpoint in accordance with
+ the video interface bindings defined in
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Endpoint node required properties for CSI-2 connection are:
+- remote-endpoint: a phandle to the bus receiver's endpoint node.
+- clock-lanes: should be set to <0> (clock lane on hardware lane 0).
+- data-lanes: should be set to <1> (one CSI-2 lane supported).
+
+Example:
+
+&i2c2 {
+	ov2680: camera-sensor@36 {
+		compatible = "ovti,ov2680";
+		reg = <0x36>;
+		clocks = <&osc>;
+		clock-names = "xvclk";
+		reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+		DOVDD-supply = <&sw2_reg>;
+		DVDD-supply = <&sw2_reg>;
+		AVDD-supply = <&reg_peri_3p15v>;
+
+		port {
+			ov2680_to_mipi: endpoint {
+				remote-endpoint = <&mipi_from_sensor>;
+				clock-lanes = <0>;
+				data-lanes = <1>;
+			};
+		};
+	};
+};