@@ -436,7 +436,8 @@
#define SCTLR_EL2_RES0 ((1 << 6) | (1 << 7) | (1 << 8) | (1 << 9) | \
(1 << 10) | (1 << 13) | (1 << 14) | (1 << 15) | \
(1 << 17) | (1 << 20) | (1 << 24) | (1 << 26) | \
- (1 << 27) | (1 << 30) | (1 << 31))
+ (1 << 27) | (1 << 30) | (1 << 31) | \
+ (0xffffffffUL << 32))
#ifdef CONFIG_CPU_BIG_ENDIAN
#define ENDIAN_SET_EL2 SCTLR_ELx_EE
@@ -452,9 +453,9 @@
SCTLR_ELx_SA | SCTLR_ELx_I | SCTLR_ELx_WXN | \
ENDIAN_CLEAR_EL2 | SCTLR_EL2_RES0)
-/* Check all the bits are accounted for */
-#define SCTLR_EL2_BUILD_BUG_ON_MISSING_BITS BUILD_BUG_ON((SCTLR_EL2_SET ^ SCTLR_EL2_CLEAR) != ~0)
-
+#if (SCTLR_EL2_SET ^ SCTLR_EL2_CLEAR) != 0xffffffffffffffff
+#error "Inconsistent SCTLR_EL2 set/clear bits"
+#endif
/* SCTLR_EL1 specific flags. */
#define SCTLR_EL1_UCI (1 << 26)
@@ -473,7 +474,8 @@
#define SCTLR_EL1_RES1 ((1 << 11) | (1 << 20) | (1 << 22) | (1 << 28) | \
(1 << 29))
#define SCTLR_EL1_RES0 ((1 << 6) | (1 << 10) | (1 << 13) | (1 << 17) | \
- (1 << 27) | (1 << 30) | (1 << 31))
+ (1 << 27) | (1 << 30) | (1 << 31) | \
+ (0xffffffffUL << 32))
#ifdef CONFIG_CPU_BIG_ENDIAN
#define ENDIAN_SET_EL1 (SCTLR_EL1_E0E | SCTLR_ELx_EE)
@@ -492,8 +494,9 @@
SCTLR_EL1_UMA | SCTLR_ELx_WXN | ENDIAN_CLEAR_EL1 |\
SCTLR_EL1_RES0)
-/* Check all the bits are accounted for */
-#define SCTLR_EL1_BUILD_BUG_ON_MISSING_BITS BUILD_BUG_ON((SCTLR_EL1_SET ^ SCTLR_EL1_CLEAR) != ~0)
+#if (SCTLR_EL1_SET ^ SCTLR_EL1_CLEAR) != 0xffffffffffffffff
+#error "Inconsistent SCTLR_EL1 set/clear bits"
+#endif
/* id_aa64isar0 */
#define ID_AA64ISAR0_TS_SHIFT 52
@@ -743,9 +746,6 @@ static inline void config_sctlr_el1(u32 clear, u32 set)
{
u32 val;
- SCTLR_EL2_BUILD_BUG_ON_MISSING_BITS;
- SCTLR_EL1_BUILD_BUG_ON_MISSING_BITS;
-
val = read_sysreg(sctlr_el1);
val &= ~clear;
val |= set;
Currently we assert that the SCTLR_EL{1,2}_{SET,CLEAR} bits are self-consistent with an assertion in config_sctlr_el1(). This is a bit unusual, since config_sctlr_el1() doesn't make use of these definitions, and is far away from the definitions themselves. We can use the CPP #error directive to have equivalent assertions in <asm/sysreg.h>, next to the definitions of the set/clear bits, which is a bit clearer and simpler. At the same time, lets fill in the upper 32 bits for both registers in their respective RES0 definitions. This could be a little nicer with GENMASK_ULL(63, 32), but this currently lives in <linux/bitops.h>, which cannot safely be included from assembly, as <asm/sysreg.h> can. Note the when the preprocessor evaluates an expression for an #if directive, all signed or unsigned values are treated as intmax_t or uintmax_t respectively. To avoid ambiguity, we define explicitly define the mask of all 64 bits. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Martin <dave.martin@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Will Deacon <will.deacon@arm.com> --- arch/arm64/include/asm/sysreg.h | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) -- 2.11.0