diff mbox

[2/3,V2] EXYNOS5: Add gpio pin numbering feature

Message ID 1358862489-28818-3-git-send-email-rajeshwari.s@samsung.com
State New
Headers show

Commit Message

Rajeshwari Shinde Jan. 22, 2013, 1:48 p.m. UTC
This patch adds support for gpio pin numbering support on EXYNOS5
pinmux.

Signed-off-by: Leela Krishna Amudala <l.krishna@samsung.com>
Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
---
Changes in V2:
	- none.
 arch/arm/cpu/armv7/exynos/pinmux.c      |  148 +++++--------
 arch/arm/include/asm/arch-exynos/gpio.h |  360 ++++++++++++++++++++++++++++++-
 2 files changed, 413 insertions(+), 95 deletions(-)

Comments

Simon Glass Jan. 26, 2013, 7:52 p.m. UTC | #1
Hi,

On Wed, Jan 23, 2013 at 2:48 AM, Rajeshwari Shinde
<rajeshwari.s@samsung.com> wrote:
> This patch adds support for gpio pin numbering support on EXYNOS5
> pinmux.
>
> Signed-off-by: Leela Krishna Amudala <l.krishna@samsung.com>
> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
> ---
> Changes in V2:
>         - none.
>  arch/arm/cpu/armv7/exynos/pinmux.c      |  148 +++++--------
>  arch/arm/include/asm/arch-exynos/gpio.h |  360 ++++++++++++++++++++++++++++++-
>  2 files changed, 413 insertions(+), 95 deletions(-)
>

> diff --git a/arch/arm/include/asm/arch-exynos/gpio.h b/arch/arm/include/asm/arch-exynos/gpio.h
> index cfe1024..af882dd 100644
> --- a/arch/arm/include/asm/arch-exynos/gpio.h
> +++ b/arch/arm/include/asm/arch-exynos/gpio.h
> @@ -272,15 +272,355 @@ void s5p_gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode);
>             - EXYNOS5_GPIO_PART3_BASE) / sizeof(struct s5p_gpio_bank)) \
>           * GPIO_PER_BANK) + pin) + EXYNOS5_GPIO_PART2_MAX)
>
> +/* A list of valid GPIO numbers for the asm-generic/gpio.h interface */
> +enum exynos5_gpio_pin {
> +       /* GPIO_PART1_STARTS */
> +       GPIO_A00,
> +       GPIO_A01,
> +       GPIO_A02,
> +       GPIO_A03,
[snip]

> +       GPIO_V44,
> +       GPIO_V45,
> +       GPIO_V46,
> +       GPIO_V47,
> +
> +       /* GPIO_PART4_STARTS */
> +       GPIO_PART3_MAX,
> +       GPIO_Z0 = GPIO_PART3_MAX,
> +       GPIO_Z1,
> +       GPIO_Z2,
> +       GPIO_Z3,
> +       GPIO_Z4,
> +       GPIO_Z5,
> +       GPIO_Z6,
> +       GPIO_MAX_PORT
> +};
> +
>  static inline unsigned int s5p_gpio_base(int nr)
>  {
>         if (cpu_is_exynos5()) {
> -               if (nr < EXYNOS5_GPIO_PART1_MAX)
> +               if (nr < GPIO_PART1_MAX)
>                         return EXYNOS5_GPIO_PART1_BASE;
> -               else if (nr < EXYNOS5_GPIO_PART2_MAX)
> +               else if (nr < GPIO_PART2_MAX)
>                         return EXYNOS5_GPIO_PART2_BASE;
> -               else
> +               else if (nr < GPIO_PART3_MAX)
>                         return EXYNOS5_GPIO_PART3_BASE;
> +               else
> +                       return EXYNOS5_GPIO_PART4_BASE;
>
>         } else if (cpu_is_exynos4()) {
>                 if (nr < EXYNOS4_GPIO_PART1_MAX)
> @@ -295,12 +635,14 @@ static inline unsigned int s5p_gpio_base(int nr)
>  static inline unsigned int s5p_gpio_part_max(int nr)
>  {
>         if (cpu_is_exynos5()) {
> -               if (nr < EXYNOS5_GPIO_PART1_MAX)
> +               if (nr < GPIO_PART1_MAX)
>                         return 0;
> -               else if (nr < EXYNOS5_GPIO_PART2_MAX)
> -                       return EXYNOS5_GPIO_PART1_MAX;
> +               else if (nr < GPIO_PART2_MAX)
> +                       return GPIO_PART1_MAX;
> +               else if (nr < GPIO_PART3_MAX)
> +                       return GPIO_PART2_MAX;
>                 else
> -                       return EXYNOS5_GPIO_PART2_MAX;
> +                       return GPIO_PART3_MAX;
>
>         } else if (cpu_is_exynos4()) {
>                 if (nr < EXYNOS4_GPIO_PART1_MAX)
> @@ -311,6 +653,10 @@ static inline unsigned int s5p_gpio_part_max(int nr)
>
>         return 0;
>  }

Do these functions need to be inline in the header file, or could they
move to the GPIO driver?

> +
> +void gpio_cfg_pin(int gpio, int cfg);
> +void gpio_set_pull(int gpio, int mode);
> +void gpio_set_drv(int gpio, int mode);
>  #endif
>
>  /* Pin configurations */
> --
> 1.7.4.4
>
Rajeshwari Birje Feb. 4, 2013, 6:26 a.m. UTC | #2
Hi Simon,

Thank you for comments

On Sun, Jan 27, 2013 at 1:22 AM, Simon Glass <sjg@chromium.org> wrote:
> Hi,
>
> On Wed, Jan 23, 2013 at 2:48 AM, Rajeshwari Shinde
> <rajeshwari.s@samsung.com> wrote:
>> This patch adds support for gpio pin numbering support on EXYNOS5
>> pinmux.
>>
>> Signed-off-by: Leela Krishna Amudala <l.krishna@samsung.com>
>> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
>> ---
>> Changes in V2:
>>         - none.
>>  arch/arm/cpu/armv7/exynos/pinmux.c      |  148 +++++--------
>>  arch/arm/include/asm/arch-exynos/gpio.h |  360 ++++++++++++++++++++++++++++++-
>>  2 files changed, 413 insertions(+), 95 deletions(-)
>>
>
>> diff --git a/arch/arm/include/asm/arch-exynos/gpio.h b/arch/arm/include/asm/arch-exynos/gpio.h
>> index cfe1024..af882dd 100644
>> --- a/arch/arm/include/asm/arch-exynos/gpio.h
>> +++ b/arch/arm/include/asm/arch-exynos/gpio.h
>> @@ -272,15 +272,355 @@ void s5p_gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode);
>>             - EXYNOS5_GPIO_PART3_BASE) / sizeof(struct s5p_gpio_bank)) \
>>           * GPIO_PER_BANK) + pin) + EXYNOS5_GPIO_PART2_MAX)
>>
>> +/* A list of valid GPIO numbers for the asm-generic/gpio.h interface */
>> +enum exynos5_gpio_pin {
>> +       /* GPIO_PART1_STARTS */
>> +       GPIO_A00,
>> +       GPIO_A01,
>> +       GPIO_A02,
>> +       GPIO_A03,
> [snip]
>
>> +       GPIO_V44,
>> +       GPIO_V45,
>> +       GPIO_V46,
>> +       GPIO_V47,
>> +
>> +       /* GPIO_PART4_STARTS */
>> +       GPIO_PART3_MAX,
>> +       GPIO_Z0 = GPIO_PART3_MAX,
>> +       GPIO_Z1,
>> +       GPIO_Z2,
>> +       GPIO_Z3,
>> +       GPIO_Z4,
>> +       GPIO_Z5,
>> +       GPIO_Z6,
>> +       GPIO_MAX_PORT
>> +};
>> +
>>  static inline unsigned int s5p_gpio_base(int nr)
>>  {
>>         if (cpu_is_exynos5()) {
>> -               if (nr < EXYNOS5_GPIO_PART1_MAX)
>> +               if (nr < GPIO_PART1_MAX)
>>                         return EXYNOS5_GPIO_PART1_BASE;
>> -               else if (nr < EXYNOS5_GPIO_PART2_MAX)
>> +               else if (nr < GPIO_PART2_MAX)
>>                         return EXYNOS5_GPIO_PART2_BASE;
>> -               else
>> +               else if (nr < GPIO_PART3_MAX)
>>                         return EXYNOS5_GPIO_PART3_BASE;
>> +               else
>> +                       return EXYNOS5_GPIO_PART4_BASE;
>>
>>         } else if (cpu_is_exynos4()) {
>>                 if (nr < EXYNOS4_GPIO_PART1_MAX)
>> @@ -295,12 +635,14 @@ static inline unsigned int s5p_gpio_base(int nr)
>>  static inline unsigned int s5p_gpio_part_max(int nr)
>>  {
>>         if (cpu_is_exynos5()) {
>> -               if (nr < EXYNOS5_GPIO_PART1_MAX)
>> +               if (nr < GPIO_PART1_MAX)
>>                         return 0;
>> -               else if (nr < EXYNOS5_GPIO_PART2_MAX)
>> -                       return EXYNOS5_GPIO_PART1_MAX;
>> +               else if (nr < GPIO_PART2_MAX)
>> +                       return GPIO_PART1_MAX;
>> +               else if (nr < GPIO_PART3_MAX)
>> +                       return GPIO_PART2_MAX;
>>                 else
>> -                       return EXYNOS5_GPIO_PART2_MAX;
>> +                       return GPIO_PART3_MAX;
>>
>>         } else if (cpu_is_exynos4()) {
>>                 if (nr < EXYNOS4_GPIO_PART1_MAX)
>> @@ -311,6 +653,10 @@ static inline unsigned int s5p_gpio_part_max(int nr)
>>
>>         return 0;
>>  }
>
> Do these functions need to be inline in the header file, or could they
> move to the GPIO driver?
We use a generic GPIO driver across S5P platform and these changes
being specific to EXYNOS it would not be good to move them to driver.
>
>> +
>> +void gpio_cfg_pin(int gpio, int cfg);
>> +void gpio_set_pull(int gpio, int mode);
>> +void gpio_set_drv(int gpio, int mode);
>>  #endif
>>
>>  /* Pin configurations */
>> --
>> 1.7.4.4
>>
> _______________________________________________
> U-Boot mailing list
> U-Boot@lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
Simon Glass Feb. 6, 2013, 3:55 a.m. UTC | #3
Hi Rajeshwari,

On Sun, Feb 3, 2013 at 10:26 PM, Rajeshwari Birje
<rajeshwari.birje@gmail.com> wrote:
> Hi Simon,
>
> Thank you for comments
>
> On Sun, Jan 27, 2013 at 1:22 AM, Simon Glass <sjg@chromium.org> wrote:
>> Hi,
>>
>> On Wed, Jan 23, 2013 at 2:48 AM, Rajeshwari Shinde
>> <rajeshwari.s@samsung.com> wrote:
>>> This patch adds support for gpio pin numbering support on EXYNOS5
>>> pinmux.
>>>
>>> Signed-off-by: Leela Krishna Amudala <l.krishna@samsung.com>
>>> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
>>> ---
>>> Changes in V2:
>>>         - none.
>>>  arch/arm/cpu/armv7/exynos/pinmux.c      |  148 +++++--------
>>>  arch/arm/include/asm/arch-exynos/gpio.h |  360 ++++++++++++++++++++++++++++++-
>>>  2 files changed, 413 insertions(+), 95 deletions(-)
>>>
>>
>>> diff --git a/arch/arm/include/asm/arch-exynos/gpio.h b/arch/arm/include/asm/arch-exynos/gpio.h
>>> index cfe1024..af882dd 100644
>>> --- a/arch/arm/include/asm/arch-exynos/gpio.h
>>> +++ b/arch/arm/include/asm/arch-exynos/gpio.h
>>> @@ -272,15 +272,355 @@ void s5p_gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode);
>>>             - EXYNOS5_GPIO_PART3_BASE) / sizeof(struct s5p_gpio_bank)) \
>>>           * GPIO_PER_BANK) + pin) + EXYNOS5_GPIO_PART2_MAX)
>>>
>>> +/* A list of valid GPIO numbers for the asm-generic/gpio.h interface */
>>> +enum exynos5_gpio_pin {
>>> +       /* GPIO_PART1_STARTS */
>>> +       GPIO_A00,
>>> +       GPIO_A01,
>>> +       GPIO_A02,
>>> +       GPIO_A03,
>> [snip]
>>
>>> +       GPIO_V44,
>>> +       GPIO_V45,
>>> +       GPIO_V46,
>>> +       GPIO_V47,
>>> +
>>> +       /* GPIO_PART4_STARTS */
>>> +       GPIO_PART3_MAX,
>>> +       GPIO_Z0 = GPIO_PART3_MAX,
>>> +       GPIO_Z1,
>>> +       GPIO_Z2,
>>> +       GPIO_Z3,
>>> +       GPIO_Z4,
>>> +       GPIO_Z5,
>>> +       GPIO_Z6,
>>> +       GPIO_MAX_PORT
>>> +};
>>> +
>>>  static inline unsigned int s5p_gpio_base(int nr)
>>>  {
>>>         if (cpu_is_exynos5()) {
>>> -               if (nr < EXYNOS5_GPIO_PART1_MAX)
>>> +               if (nr < GPIO_PART1_MAX)
>>>                         return EXYNOS5_GPIO_PART1_BASE;
>>> -               else if (nr < EXYNOS5_GPIO_PART2_MAX)
>>> +               else if (nr < GPIO_PART2_MAX)
>>>                         return EXYNOS5_GPIO_PART2_BASE;
>>> -               else
>>> +               else if (nr < GPIO_PART3_MAX)
>>>                         return EXYNOS5_GPIO_PART3_BASE;
>>> +               else
>>> +                       return EXYNOS5_GPIO_PART4_BASE;
>>>
>>>         } else if (cpu_is_exynos4()) {
>>>                 if (nr < EXYNOS4_GPIO_PART1_MAX)
>>> @@ -295,12 +635,14 @@ static inline unsigned int s5p_gpio_base(int nr)
>>>  static inline unsigned int s5p_gpio_part_max(int nr)
>>>  {
>>>         if (cpu_is_exynos5()) {
>>> -               if (nr < EXYNOS5_GPIO_PART1_MAX)
>>> +               if (nr < GPIO_PART1_MAX)
>>>                         return 0;
>>> -               else if (nr < EXYNOS5_GPIO_PART2_MAX)
>>> -                       return EXYNOS5_GPIO_PART1_MAX;
>>> +               else if (nr < GPIO_PART2_MAX)
>>> +                       return GPIO_PART1_MAX;
>>> +               else if (nr < GPIO_PART3_MAX)
>>> +                       return GPIO_PART2_MAX;
>>>                 else
>>> -                       return EXYNOS5_GPIO_PART2_MAX;
>>> +                       return GPIO_PART3_MAX;
>>>
>>>         } else if (cpu_is_exynos4()) {
>>>                 if (nr < EXYNOS4_GPIO_PART1_MAX)
>>> @@ -311,6 +653,10 @@ static inline unsigned int s5p_gpio_part_max(int nr)
>>>
>>>         return 0;
>>>  }
>>
>> Do these functions need to be inline in the header file, or could they
>> move to the GPIO driver?
> We use a generic GPIO driver across S5P platform and these changes
> being specific to EXYNOS it would not be good to move them to driver.

OK.

>>
>>> +
>>> +void gpio_cfg_pin(int gpio, int cfg);
>>> +void gpio_set_pull(int gpio, int mode);
>>> +void gpio_set_drv(int gpio, int mode);
>>>  #endif
>>>
>>>  /* Pin configurations */
>>> --
>>> 1.7.4.4
>>>
>> _______________________________________________
>> U-Boot mailing list
>> U-Boot@lists.denx.de
>> http://lists.denx.de/mailman/listinfo/u-boot
>
> --
> Regards,
> Rajeshwari Shinde

Regards,
Simon
diff mbox

Patch

diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c
index bd499b4..c79d58e 100644
--- a/arch/arm/cpu/armv7/exynos/pinmux.c
+++ b/arch/arm/cpu/armv7/exynos/pinmux.c
@@ -29,89 +29,77 @@ 
 
 static void exynos5_uart_config(int peripheral)
 {
-	struct exynos5_gpio_part1 *gpio1 =
-		(struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1();
-	struct s5p_gpio_bank *bank;
 	int i, start, count;
 
 	switch (peripheral) {
 	case PERIPH_ID_UART0:
-		bank = &gpio1->a0;
-		start = 0;
+		start = GPIO_A00;
 		count = 4;
 		break;
 	case PERIPH_ID_UART1:
-		bank = &gpio1->d0;
-		start = 0;
+		start = GPIO_D00;
 		count = 4;
 		break;
 	case PERIPH_ID_UART2:
-		bank = &gpio1->a1;
-		start = 0;
+		start = GPIO_A10;
 		count = 4;
 		break;
 	case PERIPH_ID_UART3:
-		bank = &gpio1->a1;
-		start = 4;
+		start = GPIO_A14;
 		count = 2;
 		break;
 	}
 	for (i = start; i < start + count; i++) {
-		s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE);
-		s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
+		gpio_set_pull(i, GPIO_PULL_NONE);
+		gpio_cfg_pin(i, GPIO_FUNC(0x2));
 	}
 }
 
 static int exynos5_mmc_config(int peripheral, int flags)
 {
-	struct exynos5_gpio_part1 *gpio1 =
-		(struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1();
-	struct s5p_gpio_bank *bank, *bank_ext;
-	int i, start = 0, gpio_func = 0;
+	int i, start, start_ext, gpio_func = 0;
 
 	switch (peripheral) {
 	case PERIPH_ID_SDMMC0:
-		bank = &gpio1->c0;
-		bank_ext = &gpio1->c1;
-		start = 0;
+		start = GPIO_C00;
+		start_ext = GPIO_C10;
 		gpio_func = GPIO_FUNC(0x2);
 		break;
 	case PERIPH_ID_SDMMC1:
-		bank = &gpio1->c2;
-		bank_ext = NULL;
+		start = GPIO_C20;
+		start_ext = 0;
 		break;
 	case PERIPH_ID_SDMMC2:
-		bank = &gpio1->c3;
-		bank_ext = &gpio1->c4;
-		start = 3;
+		start = GPIO_C30;
+		start_ext = GPIO_C43;
 		gpio_func = GPIO_FUNC(0x3);
 		break;
 	case PERIPH_ID_SDMMC3:
-		bank = &gpio1->c4;
-		bank_ext = NULL;
+		start = GPIO_C40;
+		start_ext = 0;
 		break;
 	}
-	if ((flags & PINMUX_FLAG_8BIT_MODE) && !bank_ext) {
+	if ((flags & PINMUX_FLAG_8BIT_MODE) && !start_ext) {
 		debug("SDMMC device %d does not support 8bit mode",
 				peripheral);
 		return -1;
 	}
 	if (flags & PINMUX_FLAG_8BIT_MODE) {
-		for (i = start; i <= (start + 3); i++) {
-			s5p_gpio_cfg_pin(bank_ext, i, gpio_func);
-			s5p_gpio_set_pull(bank_ext, i, GPIO_PULL_UP);
-			s5p_gpio_set_drv(bank_ext, i, GPIO_DRV_4X);
+		for (i = start_ext; i <= (start_ext + 3); i++) {
+			gpio_cfg_pin(i, gpio_func);
+			gpio_set_pull(i, GPIO_PULL_UP);
+			gpio_set_drv(i, GPIO_DRV_4X);
 		}
 	}
 	for (i = 0; i < 2; i++) {
-		s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
-		s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE);
-		s5p_gpio_set_drv(bank, i, GPIO_DRV_4X);
+		gpio_cfg_pin(start + i, GPIO_FUNC(0x2));
+		gpio_set_pull(start + i, GPIO_PULL_NONE);
+		gpio_set_drv(start + i, GPIO_DRV_4X);
 	}
 	for (i = 3; i <= 6; i++) {
-		s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
-		s5p_gpio_set_pull(bank, i, GPIO_PULL_UP);
-		s5p_gpio_set_drv(bank, i, GPIO_DRV_4X);
+		gpio_cfg_pin(start + i, GPIO_FUNC(0x2));
+		gpio_set_pull(start + i, GPIO_PULL_UP);
+		gpio_set_drv(start + i, GPIO_DRV_4X);
 	}
 
 	return 0;
@@ -119,8 +107,6 @@  static int exynos5_mmc_config(int peripheral, int flags)
 
 static void exynos5_sromc_config(int flags)
 {
-	struct exynos5_gpio_part1 *gpio1 =
-		(struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1();
 	int i;
 
 	/*
@@ -138,13 +124,13 @@  static void exynos5_sromc_config(int flags)
 	 * GPY1[2]	SROM_WAIT(2)
 	 * GPY1[3]	EBI_DATA_RDn(2)
 	 */
-	s5p_gpio_cfg_pin(&gpio1->y0, (flags & PINMUX_FLAG_BANK),
+	gpio_cfg_pin(GPIO_Y00 + (flags & PINMUX_FLAG_BANK),
 				GPIO_FUNC(2));
-	s5p_gpio_cfg_pin(&gpio1->y0, 4, GPIO_FUNC(2));
-	s5p_gpio_cfg_pin(&gpio1->y0, 5, GPIO_FUNC(2));
+	gpio_cfg_pin(GPIO_Y04, GPIO_FUNC(2));
+	gpio_cfg_pin(GPIO_Y05, GPIO_FUNC(2));
 
 	for (i = 0; i < 4; i++)
-		s5p_gpio_cfg_pin(&gpio1->y1, i, GPIO_FUNC(2));
+		gpio_cfg_pin(GPIO_Y10 + i, GPIO_FUNC(2));
 
 	/*
 	 * EBI: 8 Addrss Lines
@@ -179,55 +165,52 @@  static void exynos5_sromc_config(int flags)
 	 * GPY6[7]	EBI_DATA[15](2)
 	 */
 	for (i = 0; i < 8; i++) {
-		s5p_gpio_cfg_pin(&gpio1->y3, i, GPIO_FUNC(2));
-		s5p_gpio_set_pull(&gpio1->y3, i, GPIO_PULL_UP);
+		gpio_cfg_pin(GPIO_Y30 + i, GPIO_FUNC(2));
+		gpio_set_pull(GPIO_Y30 + i, GPIO_PULL_UP);
 
-		s5p_gpio_cfg_pin(&gpio1->y5, i, GPIO_FUNC(2));
-		s5p_gpio_set_pull(&gpio1->y5, i, GPIO_PULL_UP);
+		gpio_cfg_pin(GPIO_Y50 + i, GPIO_FUNC(2));
+		gpio_set_pull(GPIO_Y50 + i, GPIO_PULL_UP);
 
-		s5p_gpio_cfg_pin(&gpio1->y6, i, GPIO_FUNC(2));
-		s5p_gpio_set_pull(&gpio1->y6, i, GPIO_PULL_UP);
+		gpio_cfg_pin(GPIO_Y60 + i, GPIO_FUNC(2));
+		gpio_set_pull(GPIO_Y60 + i, GPIO_PULL_UP);
 	}
 }
 
 static void exynos5_i2c_config(int peripheral, int flags)
 {
 
-	struct exynos5_gpio_part1 *gpio1 =
-		(struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1();
-
 	switch (peripheral) {
 	case PERIPH_ID_I2C0:
-		s5p_gpio_cfg_pin(&gpio1->b3, 0, GPIO_FUNC(0x2));
-		s5p_gpio_cfg_pin(&gpio1->b3, 1, GPIO_FUNC(0x2));
+		gpio_cfg_pin(GPIO_B30, GPIO_FUNC(0x2));
+		gpio_cfg_pin(GPIO_B31, GPIO_FUNC(0x2));
 		break;
 	case PERIPH_ID_I2C1:
-		s5p_gpio_cfg_pin(&gpio1->b3, 2, GPIO_FUNC(0x2));
-		s5p_gpio_cfg_pin(&gpio1->b3, 3, GPIO_FUNC(0x2));
+		gpio_cfg_pin(GPIO_B32, GPIO_FUNC(0x2));
+		gpio_cfg_pin(GPIO_B33, GPIO_FUNC(0x2));
 		break;
 	case PERIPH_ID_I2C2:
-		s5p_gpio_cfg_pin(&gpio1->a0, 6, GPIO_FUNC(0x3));
-		s5p_gpio_cfg_pin(&gpio1->a0, 7, GPIO_FUNC(0x3));
+		gpio_cfg_pin(GPIO_A06, GPIO_FUNC(0x3));
+		gpio_cfg_pin(GPIO_A07, GPIO_FUNC(0x3));
 		break;
 	case PERIPH_ID_I2C3:
-		s5p_gpio_cfg_pin(&gpio1->a1, 2, GPIO_FUNC(0x3));
-		s5p_gpio_cfg_pin(&gpio1->a1, 3, GPIO_FUNC(0x3));
+		gpio_cfg_pin(GPIO_A12, GPIO_FUNC(0x3));
+		gpio_cfg_pin(GPIO_A13, GPIO_FUNC(0x3));
 		break;
 	case PERIPH_ID_I2C4:
-		s5p_gpio_cfg_pin(&gpio1->a2, 0, GPIO_FUNC(0x3));
-		s5p_gpio_cfg_pin(&gpio1->a2, 1, GPIO_FUNC(0x3));
+		gpio_cfg_pin(GPIO_A20, GPIO_FUNC(0x3));
+		gpio_cfg_pin(GPIO_A21, GPIO_FUNC(0x3));
 		break;
 	case PERIPH_ID_I2C5:
-		s5p_gpio_cfg_pin(&gpio1->a2, 2, GPIO_FUNC(0x3));
-		s5p_gpio_cfg_pin(&gpio1->a2, 3, GPIO_FUNC(0x3));
+		gpio_cfg_pin(GPIO_A22, GPIO_FUNC(0x3));
+		gpio_cfg_pin(GPIO_A23, GPIO_FUNC(0x3));
 		break;
 	case PERIPH_ID_I2C6:
-		s5p_gpio_cfg_pin(&gpio1->b1, 3, GPIO_FUNC(0x4));
-		s5p_gpio_cfg_pin(&gpio1->b1, 4, GPIO_FUNC(0x4));
+		gpio_cfg_pin(GPIO_B13, GPIO_FUNC(0x4));
+		gpio_cfg_pin(GPIO_B14, GPIO_FUNC(0x4));
 		break;
 	case PERIPH_ID_I2C7:
-		s5p_gpio_cfg_pin(&gpio1->b2, 2, GPIO_FUNC(0x3));
-		s5p_gpio_cfg_pin(&gpio1->b2, 3, GPIO_FUNC(0x3));
+		gpio_cfg_pin(GPIO_B22, GPIO_FUNC(0x3));
+		gpio_cfg_pin(GPIO_B23, GPIO_FUNC(0x3));
 		break;
 	}
 }
@@ -235,53 +218,42 @@  static void exynos5_i2c_config(int peripheral, int flags)
 static void exynos5_i2s_config(int peripheral)
 {
 	int i;
-	struct exynos5_gpio_part1 *gpio1 =
-		(struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1();
 
 	for (i = 0; i < 5; i++)
-		s5p_gpio_cfg_pin(&gpio1->b0, i, GPIO_FUNC(0x02));
+		gpio_cfg_pin(GPIO_B00+i, GPIO_FUNC(0x02));
 }
 
 void exynos5_spi_config(int peripheral)
 {
 	int cfg = 0, pin = 0, i;
-	struct s5p_gpio_bank *bank = NULL;
-	struct exynos5_gpio_part1 *gpio1 =
-		(struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1();
-	struct exynos5_gpio_part2 *gpio2 =
-		(struct exynos5_gpio_part2 *) samsung_get_base_gpio_part2();
 
 	switch (peripheral) {
 	case PERIPH_ID_SPI0:
-		bank = &gpio1->a2;
 		cfg = GPIO_FUNC(0x2);
-		pin = 0;
+		pin = GPIO_A20;
 		break;
 	case PERIPH_ID_SPI1:
-		bank = &gpio1->a2;
 		cfg = GPIO_FUNC(0x2);
-		pin = 4;
+		pin = GPIO_A24;
 		break;
 	case PERIPH_ID_SPI2:
-		bank = &gpio1->b1;
 		cfg = GPIO_FUNC(0x5);
-		pin = 1;
+		pin = GPIO_B11;
 		break;
 	case PERIPH_ID_SPI3:
-		bank = &gpio2->f1;
 		cfg = GPIO_FUNC(0x2);
-		pin = 0;
+		pin = GPIO_F10;
 		break;
 	case PERIPH_ID_SPI4:
 		for (i = 0; i < 2; i++) {
-			s5p_gpio_cfg_pin(&gpio2->f0, i + 2, GPIO_FUNC(0x4));
-			s5p_gpio_cfg_pin(&gpio2->e0, i + 4, GPIO_FUNC(0x4));
+			gpio_cfg_pin(GPIO_F02 + i, GPIO_FUNC(0x4));
+			gpio_cfg_pin(GPIO_E04 + i, GPIO_FUNC(0x4));
 		}
 		break;
 	}
 	if (peripheral != PERIPH_ID_SPI4) {
 		for (i = pin; i < pin + 4; i++)
-			s5p_gpio_cfg_pin(bank, i, cfg);
+			gpio_cfg_pin(i, cfg);
 	}
 }
 
diff --git a/arch/arm/include/asm/arch-exynos/gpio.h b/arch/arm/include/asm/arch-exynos/gpio.h
index cfe1024..af882dd 100644
--- a/arch/arm/include/asm/arch-exynos/gpio.h
+++ b/arch/arm/include/asm/arch-exynos/gpio.h
@@ -272,15 +272,355 @@  void s5p_gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode);
 	    - EXYNOS5_GPIO_PART3_BASE) / sizeof(struct s5p_gpio_bank)) \
 	  * GPIO_PER_BANK) + pin) + EXYNOS5_GPIO_PART2_MAX)
 
+/* A list of valid GPIO numbers for the asm-generic/gpio.h interface */
+enum exynos5_gpio_pin {
+	/* GPIO_PART1_STARTS */
+	GPIO_A00,
+	GPIO_A01,
+	GPIO_A02,
+	GPIO_A03,
+	GPIO_A04,
+	GPIO_A05,
+	GPIO_A06,
+	GPIO_A07,
+	GPIO_A10,
+	GPIO_A11,
+	GPIO_A12,
+	GPIO_A13,
+	GPIO_A14,
+	GPIO_A15,
+	GPIO_A16,
+	GPIO_A17,
+	GPIO_A20,
+	GPIO_A21,
+	GPIO_A22,
+	GPIO_A23,
+	GPIO_A24,
+	GPIO_A25,
+	GPIO_A26,
+	GPIO_A27,
+	GPIO_B00,
+	GPIO_B01,
+	GPIO_B02,
+	GPIO_B03,
+	GPIO_B04,
+	GPIO_B05,
+	GPIO_B06,
+	GPIO_B07,
+	GPIO_B10,
+	GPIO_B11,
+	GPIO_B12,
+	GPIO_B13,
+	GPIO_B14,
+	GPIO_B15,
+	GPIO_B16,
+	GPIO_B17,
+	GPIO_B20,
+	GPIO_B21,
+	GPIO_B22,
+	GPIO_B23,
+	GPIO_B24,
+	GPIO_B25,
+	GPIO_B26,
+	GPIO_B27,
+	GPIO_B30,
+	GPIO_B31,
+	GPIO_B32,
+	GPIO_B33,
+	GPIO_B34,
+	GPIO_B35,
+	GPIO_B36,
+	GPIO_B37,
+	GPIO_C00,
+	GPIO_C01,
+	GPIO_C02,
+	GPIO_C03,
+	GPIO_C04,
+	GPIO_C05,
+	GPIO_C06,
+	GPIO_C07,
+	GPIO_C10,
+	GPIO_C11,
+	GPIO_C12,
+	GPIO_C13,
+	GPIO_C14,
+	GPIO_C15,
+	GPIO_C16,
+	GPIO_C17,
+	GPIO_C20,
+	GPIO_C21,
+	GPIO_C22,
+	GPIO_C23,
+	GPIO_C24,
+	GPIO_C25,
+	GPIO_C26,
+	GPIO_C27,
+	GPIO_C30,
+	GPIO_C31,
+	GPIO_C32,
+	GPIO_C33,
+	GPIO_C34,
+	GPIO_C35,
+	GPIO_C36,
+	GPIO_C37,
+	GPIO_D00,
+	GPIO_D01,
+	GPIO_D02,
+	GPIO_D03,
+	GPIO_D04,
+	GPIO_D05,
+	GPIO_D06,
+	GPIO_D07,
+	GPIO_D10,
+	GPIO_D11,
+	GPIO_D12,
+	GPIO_D13,
+	GPIO_D14,
+	GPIO_D15,
+	GPIO_D16,
+	GPIO_D17,
+	GPIO_Y00,
+	GPIO_Y01,
+	GPIO_Y02,
+	GPIO_Y03,
+	GPIO_Y04,
+	GPIO_Y05,
+	GPIO_Y06,
+	GPIO_Y07,
+	GPIO_Y10,
+	GPIO_Y11,
+	GPIO_Y12,
+	GPIO_Y13,
+	GPIO_Y14,
+	GPIO_Y15,
+	GPIO_Y16,
+	GPIO_Y17,
+	GPIO_Y20,
+	GPIO_Y21,
+	GPIO_Y22,
+	GPIO_Y23,
+	GPIO_Y24,
+	GPIO_Y25,
+	GPIO_Y26,
+	GPIO_Y27,
+	GPIO_Y30,
+	GPIO_Y31,
+	GPIO_Y32,
+	GPIO_Y33,
+	GPIO_Y34,
+	GPIO_Y35,
+	GPIO_Y36,
+	GPIO_Y37,
+	GPIO_Y40,
+	GPIO_Y41,
+	GPIO_Y42,
+	GPIO_Y43,
+	GPIO_Y44,
+	GPIO_Y45,
+	GPIO_Y46,
+	GPIO_Y47,
+	GPIO_Y50,
+	GPIO_Y51,
+	GPIO_Y52,
+	GPIO_Y53,
+	GPIO_Y54,
+	GPIO_Y55,
+	GPIO_Y56,
+	GPIO_Y57,
+	GPIO_Y60,
+	GPIO_Y61,
+	GPIO_Y62,
+	GPIO_Y63,
+	GPIO_Y64,
+	GPIO_Y65,
+	GPIO_Y66,
+	GPIO_Y67,
+	RES = GPIO_Y67 + (0x3 * GPIO_PER_BANK),
+	GPIO_C40,
+	GPIO_C41,
+	GPIO_C42,
+	GPIO_C43,
+	GPIO_C44,
+	GPIO_C45,
+	GPIO_C46,
+	GPIO_C47,
+	RES1 = GPIO_C47 + (0x48 * GPIO_PER_BANK),
+	GPIO_X00,
+	GPIO_X01,
+	GPIO_X02,
+	GPIO_X03,
+	GPIO_X04,
+	GPIO_X05,
+	GPIO_X06,
+	GPIO_X07,
+	GPIO_X10,
+	GPIO_X11,
+	GPIO_X12,
+	GPIO_X13,
+	GPIO_X14,
+	GPIO_X15,
+	GPIO_X16,
+	GPIO_X17,
+	GPIO_X20,
+	GPIO_X21,
+	GPIO_X22,
+	GPIO_X23,
+	GPIO_X24,
+	GPIO_X25,
+	GPIO_X26,
+	GPIO_X27,
+	GPIO_X30,
+	GPIO_X31,
+	GPIO_X32,
+	GPIO_X33,
+	GPIO_X34,
+	GPIO_X35,
+	GPIO_X36,
+	GPIO_X37,
+
+	/* GPIO_PART2_STARTS */
+	GPIO_PART1_MAX,
+	GPIO_E00 = GPIO_PART1_MAX,
+	GPIO_E01,
+	GPIO_E02,
+	GPIO_E03,
+	GPIO_E04,
+	GPIO_E05,
+	GPIO_E06,
+	GPIO_E07,
+	GPIO_E10,
+	GPIO_E11,
+	GPIO_E12,
+	GPIO_E13,
+	GPIO_E14,
+	GPIO_E15,
+	GPIO_E16,
+	GPIO_E17,
+	GPIO_F00,
+	GPIO_F01,
+	GPIO_F02,
+	GPIO_F03,
+	GPIO_F04,
+	GPIO_F05,
+	GPIO_F06,
+	GPIO_F07,
+	GPIO_F10,
+	GPIO_F11,
+	GPIO_F12,
+	GPIO_F13,
+	GPIO_F14,
+	GPIO_F15,
+	GPIO_F16,
+	GPIO_F17,
+	GPIO_G00,
+	GPIO_G01,
+	GPIO_G02,
+	GPIO_G03,
+	GPIO_G04,
+	GPIO_G05,
+	GPIO_G06,
+	GPIO_G07,
+	GPIO_G10,
+	GPIO_G11,
+	GPIO_G12,
+	GPIO_G13,
+	GPIO_G14,
+	GPIO_G15,
+	GPIO_G16,
+	GPIO_G17,
+	GPIO_G20,
+	GPIO_G21,
+	GPIO_G22,
+	GPIO_G23,
+	GPIO_G24,
+	GPIO_G25,
+	GPIO_G26,
+	GPIO_G27,
+	GPIO_H00,
+	GPIO_H01,
+	GPIO_H02,
+	GPIO_H03,
+	GPIO_H04,
+	GPIO_H05,
+	GPIO_H06,
+	GPIO_H07,
+	GPIO_H10,
+	GPIO_H11,
+	GPIO_H12,
+	GPIO_H13,
+	GPIO_H14,
+	GPIO_H15,
+	GPIO_H16,
+	GPIO_H17,
+
+	/* GPIO_PART3_STARTS */
+	GPIO_PART2_MAX,
+	GPIO_V00 = GPIO_PART2_MAX,
+	GPIO_V01,
+	GPIO_V02,
+	GPIO_V03,
+	GPIO_V04,
+	GPIO_V05,
+	GPIO_V06,
+	GPIO_V07,
+	GPIO_V10,
+	GPIO_V11,
+	GPIO_V12,
+	GPIO_V13,
+	GPIO_V14,
+	GPIO_V15,
+	GPIO_V16,
+	GPIO_V17,
+	RES3 = GPIO_V17 + GPIO_PER_BANK,
+	GPIO_V20,
+	GPIO_V21,
+	GPIO_V22,
+	GPIO_V23,
+	GPIO_V24,
+	GPIO_V25,
+	GPIO_V26,
+	GPIO_V27,
+	GPIO_V30,
+	GPIO_V31,
+	GPIO_V32,
+	GPIO_V33,
+	GPIO_V34,
+	GPIO_V35,
+	GPIO_V36,
+	GPIO_V37,
+	RES4 = GPIO_V37 + GPIO_PER_BANK,
+	GPIO_V40,
+	GPIO_V41,
+	GPIO_V42,
+	GPIO_V43,
+	GPIO_V44,
+	GPIO_V45,
+	GPIO_V46,
+	GPIO_V47,
+
+	/* GPIO_PART4_STARTS */
+	GPIO_PART3_MAX,
+	GPIO_Z0 = GPIO_PART3_MAX,
+	GPIO_Z1,
+	GPIO_Z2,
+	GPIO_Z3,
+	GPIO_Z4,
+	GPIO_Z5,
+	GPIO_Z6,
+	GPIO_MAX_PORT
+};
+
 static inline unsigned int s5p_gpio_base(int nr)
 {
 	if (cpu_is_exynos5()) {
-		if (nr < EXYNOS5_GPIO_PART1_MAX)
+		if (nr < GPIO_PART1_MAX)
 			return EXYNOS5_GPIO_PART1_BASE;
-		else if (nr < EXYNOS5_GPIO_PART2_MAX)
+		else if (nr < GPIO_PART2_MAX)
 			return EXYNOS5_GPIO_PART2_BASE;
-		else
+		else if (nr < GPIO_PART3_MAX)
 			return EXYNOS5_GPIO_PART3_BASE;
+		else
+			return EXYNOS5_GPIO_PART4_BASE;
 
 	} else if (cpu_is_exynos4()) {
 		if (nr < EXYNOS4_GPIO_PART1_MAX)
@@ -295,12 +635,14 @@  static inline unsigned int s5p_gpio_base(int nr)
 static inline unsigned int s5p_gpio_part_max(int nr)
 {
 	if (cpu_is_exynos5()) {
-		if (nr < EXYNOS5_GPIO_PART1_MAX)
+		if (nr < GPIO_PART1_MAX)
 			return 0;
-		else if (nr < EXYNOS5_GPIO_PART2_MAX)
-			return EXYNOS5_GPIO_PART1_MAX;
+		else if (nr < GPIO_PART2_MAX)
+			return GPIO_PART1_MAX;
+		else if (nr < GPIO_PART3_MAX)
+			return GPIO_PART2_MAX;
 		else
-			return EXYNOS5_GPIO_PART2_MAX;
+			return GPIO_PART3_MAX;
 
 	} else if (cpu_is_exynos4()) {
 		if (nr < EXYNOS4_GPIO_PART1_MAX)
@@ -311,6 +653,10 @@  static inline unsigned int s5p_gpio_part_max(int nr)
 
 	return 0;
 }
+
+void gpio_cfg_pin(int gpio, int cfg);
+void gpio_set_pull(int gpio, int mode);
+void gpio_set_drv(int gpio, int mode);
 #endif
 
 /* Pin configurations */