new file mode 100644
@@ -0,0 +1,123 @@
+QCOM WCD9335 Codec
+
+Qualcomm WCD9335 Codec is a standalone Hi-Fi audio codec IC, supports
+Qualcomm Technologies, Inc. (QTI) multimedia solutions, including
+the MSM8996, MSM8976, and MSM8956 chipsets. It has in-built
+Soundwire controller, interrupt mux. It supports both I2S/I2C and
+SLIMbus audio interfaces.
+
+Required properties with SLIMbus Interface:
+
+- compatible:
+ Usage: required
+ Value type: <stringlist>
+ Definition: For SLIMbus interface it should be "slimMID,PID",
+ textual representation of Manufacturer ID, Product Code,
+ shall be in lower case hexadecimal with leading zeroes
+ suppressed. Refer to slimbus/bus.txt for details.
+ Should be:
+ "slim217,1a0" for MSM8996 and APQ8096 SoCs with SLIMbus.
+
+- reg
+ Usage: required
+ Value type: <u32 u32>
+ Definition: Should be ('Device index', 'Instance ID')
+
+- interrupts
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: Interrupts via WCD INTR1 and INTR2 pins
+
+- interrupt-names:
+ Usage: required
+ Value type: <String array>
+ Definition: Interrupt names of WCD INTR1 and INTR2
+ Should be: "intr1", "intr2"
+
+- reset-gpio:
+ Usage: required
+ Value type: <String Array>
+ Definition: Reset gpio line
+
+- qcom,ifd:
+ Usage: required
+ Value type: <phandle>
+ Definition: SLIM interface device
+
+- clocks:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: See clock-bindings.txt section "consumers". List of
+ three clock specifiers for mclk, mclk2 and slimbus clock.
+
+- clock-names:
+ Usage: required
+ Value type: <string>
+ Definition: Must contain "mclk", "mclk2" and "slimbus" strings.
+
+- vdd-buck-supply:
+ Usage: required
+ Value type: <phandle>
+ Definition: Should contain a reference to the 1.8V buck supply
+
+- vdd-buck-sido-supply:
+ Usage: required
+ Value type: <phandle>
+ Definition: Should contain a reference to the 1.8V SIDO buck supply
+
+- vdd-rx-supply:
+ Usage: required
+ Value type: <phandle>
+ Definition: Should contain a reference to the 1.8V rx supply
+
+- vdd-tx-supply:
+ Usage: required
+ Value type: <phandle>
+ Definition: Should contain a reference to the 1.8V tx supply
+
+- vdd-vbat-supply:
+ Usage: Optional
+ Value type: <phandle>
+ Definition: Should contain a reference to the vbat supply
+
+- vdd-micbias-supply:
+ Usage: required
+ Value type: <phandle>
+ Definition: Should contain a reference to the micbias supply
+
+- vdd-io-supply:
+ Usage: required
+ Value type: <phandle>
+ Definition: Should contain a reference to the 1.8V io supply
+
+- interrupt-controller:
+ Usage: required
+ Definition: Indicating that this is a interrupt controller
+
+- #interrupt-cells:
+ Usage: required
+ Value type: <int>
+ Definition: should be 1
+
+#sound-dai-cells
+ Usage: required
+ Value type: <u32>
+ Definition: Must be 1
+
+codec@1{
+ compatible = "slim217,1a0";
+ reg = <1 0>;
+ interrupts = <&msmgpio 54 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "intr2"
+ reset-gpio = <&msmgpio 64 0>;
+ qcom,ifd = <&wc9335_ifd>;
+ clock-names = "mclk", "native";
+ clocks = <&rpmcc RPM_SMD_DIV_CLK1>,
+ <&rpmcc RPM_SMD_BB_CLK1>;
+ vdd-buck-supply = <&pm8994_s4>;
+ vdd-rx-supply = <&pm8994_s4>;
+ vdd-buck-sido-supply = <&pm8994_s4>;
+ vdd-tx-supply = <&pm8994_s4>;
+ vdd-io-supply = <&pm8994_s4>;
+ #sound-dai-cells = <1>;
+}
This patch adds bindings for wcd9335 audio codec which can support both SLIMbus and I2S/I2C interface. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> --- .../devicetree/bindings/sound/qcom,wcd9335.txt | 123 +++++++++++++++++++++ 1 file changed, 123 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/qcom,wcd9335.txt -- 2.16.2