@@ -139,92 +139,67 @@ static const MemoryRegionOps pcnet_io_ops = {
.endianness = DEVICE_LITTLE_ENDIAN,
};
-static void pcnet_mmio_writeb(void *opaque, hwaddr addr, uint32_t val)
+/*
+ * TODO: should MMIO accesses to the addresses corresponding to the
+ * APROM also honour the BCR_DWIO() setting? If so, then these functions
+ * and pcnet_ioport_write/pcnet_ioport_read could be merged.
+ * If not, then should pcnet_ioport_{read,write}{w,l} really check
+ * BCR_DWIO() for MMIO writes ?
+ */
+static void pcnet_mmio_write(void *opaque, hwaddr addr, uint64_t value,
+ unsigned size)
{
PCNetState *d = opaque;
- trace_pcnet_mmio_writeb(opaque, addr, val);
- if (!(addr & 0x10))
- pcnet_aprom_writeb(d, addr & 0x0f, val);
-}
+ trace_pcnet_mmio_write(opaque, addr, size, val);
-static uint32_t pcnet_mmio_readb(void *opaque, hwaddr addr)
-{
- PCNetState *d = opaque;
- uint32_t val = -1;
-
- if (!(addr & 0x10))
- val = pcnet_aprom_readb(d, addr & 0x0f);
- trace_pcnet_mmio_readb(opaque, addr, val);
- return val;
-}
-
-static void pcnet_mmio_writew(void *opaque, hwaddr addr, uint32_t val)
-{
- PCNetState *d = opaque;
-
- trace_pcnet_mmio_writew(opaque, addr, val);
- if (addr & 0x10)
- pcnet_ioport_writew(d, addr & 0x0f, val);
- else {
- addr &= 0x0f;
- pcnet_aprom_writeb(d, addr, val & 0xff);
- pcnet_aprom_writeb(d, addr+1, (val & 0xff00) >> 8);
+ if (addr < 0x10) {
+ if (size == 1) {
+ pcnet_aprom_writeb(d, addr, data);
+ } else if ((addr & 1) == 0 && size == 2) {
+ pcnet_aprom_writeb(d, addr, data & 0xff);
+ pcnet_aprom_writeb(d, addr + 1, data >> 8);
+ } else if ((addr & 3) == 0 && size == 4) {
+ pcnet_aprom_writeb(d, addr, data & 0xff);
+ pcnet_aprom_writeb(d, addr + 1, (data >> 8) & 0xff);
+ pcnet_aprom_writeb(d, addr + 2, (data >> 16) & 0xff);
+ pcnet_aprom_writeb(d, addr + 3, data >> 24);
+ }
+ } else {
+ if (size == 2) {
+ pcnet_ioport_writew(d, addr, data);
+ } else if (size == 4) {
+ pcnet_ioport_writel(d, addr, data);
+ }
}
}
-static uint32_t pcnet_mmio_readw(void *opaque, hwaddr addr)
-{
- PCNetState *d = opaque;
- uint32_t val = -1;
-
- if (addr & 0x10)
- val = pcnet_ioport_readw(d, addr & 0x0f);
- else {
- addr &= 0x0f;
- val = pcnet_aprom_readb(d, addr+1);
- val <<= 8;
- val |= pcnet_aprom_readb(d, addr);
- }
- trace_pcnet_mmio_readw(opaque, addr, val);
- return val;
-}
-
-static void pcnet_mmio_writel(void *opaque, hwaddr addr, uint32_t val)
+static uint64_t pcnet_mmio_read(void *opque, hwaddr addr, unsigned size)
{
PCNetState *d = opaque;
- trace_pcnet_mmio_writel(opaque, addr, val);
- if (addr & 0x10)
- pcnet_ioport_writel(d, addr & 0x0f, val);
- else {
- addr &= 0x0f;
- pcnet_aprom_writeb(d, addr, val & 0xff);
- pcnet_aprom_writeb(d, addr+1, (val & 0xff00) >> 8);
- pcnet_aprom_writeb(d, addr+2, (val & 0xff0000) >> 16);
- pcnet_aprom_writeb(d, addr+3, (val & 0xff000000) >> 24);
- }
-}
+ trace_pcnet_ioport_read(opaque, addr, size);
-static uint32_t pcnet_mmio_readl(void *opaque, hwaddr addr)
-{
- PCNetState *d = opaque;
- uint32_t val;
-
- if (addr & 0x10)
- val = pcnet_ioport_readl(d, addr & 0x0f);
- else {
- addr &= 0x0f;
- val = pcnet_aprom_readb(d, addr+3);
- val <<= 8;
- val |= pcnet_aprom_readb(d, addr+2);
- val <<= 8;
- val |= pcnet_aprom_readb(d, addr+1);
- val <<= 8;
- val |= pcnet_aprom_readb(d, addr);
+ if (addr < 0x10) {
+ if (size == 1) {
+ return pcnet_aprom_readb(d, addr);
+ } else if ((addr & 1) == 0 && size == 2) {
+ return pcnet_aprom_readb(d, addr) |
+ (pcnet_aprom_readb(d, addr + 1) << 8);
+ } else if ((addr & 3) == 0 && size == 4) {
+ return pcnet_aprom_readb(d, addr) |
+ (pcnet_aprom_readb(d, addr + 1) << 8) |
+ (pcnet_aprom_readb(d, addr + 2) << 16) |
+ (pcnet_aprom_readb(d, addr + 3) << 24);
+ }
+ } else {
+ if (size == 2) {
+ return pcnet_ioport_readw(d, addr);
+ } else if (size == 4) {
+ return pcnet_ioport_readl(d, addr);
+ }
}
- trace_pcnet_mmio_readl(opaque, addr, val);
- return val;
+ return ((uint64_t)1 << (size * 8)) - 1;
}
static const VMStateDescription vmstate_pci_pcnet = {
@@ -241,10 +216,12 @@ static const VMStateDescription vmstate_pci_pcnet = {
/* PCI interface */
static const MemoryRegionOps pcnet_mmio_ops = {
- .old_mmio = {
- .read = { pcnet_mmio_readb, pcnet_mmio_readw, pcnet_mmio_readl },
- .write = { pcnet_mmio_writeb, pcnet_mmio_writew, pcnet_mmio_writel },
- },
+ .read = pcnet_mmio_read,
+ .write = pcnet_mmio_write,
+ .valid.min_access_size = 1,
+ .valid.max_access_size = 4,
+ .impl.min_access_size = 1,
+ .impl.max_access_size = 4,
.endianness = DEVICE_LITTLE_ENDIAN,
};
@@ -61,12 +61,8 @@ pcnet_aprom_writeb(void *opaque, uint32_t addr, uint32_t val) "opaque=%p addr=0x
pcnet_aprom_readb(void *opaque, uint32_t addr, uint32_t val) "opaque=%p addr=0x%08x val=0x%02x"
pcnet_ioport_read(void *opaque, uint64_t addr, unsigned size) "opaque=%p addr=0x%"PRIx64" size=%d"
pcnet_ioport_write(void *opaque, uint64_t addr, uint64_t data, unsigned size) "opaque=%p addr=0x%"PRIx64" data=0x%"PRIx64" size=%d"
-pcnet_mmio_writeb(void *opaque, uint64_t addr, uint32_t val) "opaque=%p addr=0x%"PRIx64" val=0x%x"
-pcnet_mmio_writew(void *opaque, uint64_t addr, uint32_t val) "opaque=%p addr=0x%"PRIx64" val=0x%x"
-pcnet_mmio_writel(void *opaque, uint64_t addr, uint32_t val) "opaque=%p addr=0x%"PRIx64" val=0x%x"
-pcnet_mmio_readb(void *opaque, uint64_t addr, uint32_t val) "opaque=%p addr=0x%"PRIx64" val=0x%x"
-pcnet_mmio_readw(void *opaque, uint64_t addr, uint32_t val) "opaque=%p addr=0x%"PRIx64" val=0x%x"
-pcnet_mmio_readl(void *opaque, uint64_t addr, uint32_t val) "opaque=%p addr=0x%"PRIx64" val=0x%x"
+pcnet_mmio_write(void *opaque, uint64_t addr, uint32_t val, unsigned size) "opaque=%p addr=0x%"PRIx64" val=0x%x size=%d"
+pcnet_mmio_read(void *opaque, uint64_t addr, unsigned size) "opaque=%p addr=0x%"PRIx64" size=%d"
# hw/net/net_rx_pkt.c
net_rx_pkt_parsed(bool ip4, bool ip6, bool udp, bool tcp, size_t l3o, size_t l4o, size_t l5o) "RX packet parsed: ip4: %d, ip6: %d, udp: %d, tcp: %d, l3 offset: %zu, l4 offset: %zu, l5 offset: %zu"
Convert the pcnet-pci device away from using the old_mmio MemoryRegionOps accessor functions. This commit is a no-behaviour-change API conversion. (Since PCNET_PNPMMIO_SIZE is 0x20, the old "addr & 0x10" check and the new "addr < 0x10" check are exact opposites; the new code is phrased to be parallel with the pcnet_io_read/write functions.) I have left a TODO comment marker because the similarity between the MMIO and IO accessor behaviour is suspicious and they could be combined, but this will be left to a different patch. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/net/pcnet-pci.c | 133 ++++++++++++++++++-------------------------- hw/net/trace-events | 8 +-- 2 files changed, 57 insertions(+), 84 deletions(-) -- 2.17.1