diff mbox series

fs: exclude 'wakeup_count' from read_all_sys test.

Message ID 20180803152018.13701-1-sspatil@google.com
State Accepted
Commit 31b7a32974689096c5b3079149b35bf04a08a505
Headers show
Series fs: exclude 'wakeup_count' from read_all_sys test. | expand

Commit Message

Sandeep Patil Aug. 3, 2018, 3:20 p.m. UTC
/sys/power/wakeup_count semantics state that the read() for the file
will block as long as there is a wakeup_event in progress. On most
systems, this will be non deterministic and will result in extremely
flaky test. Exclude the file from read_all_sys test for the same.

Signed-off-by: Sandeep Patil <sspatil@google.com>
---
 runtest/fs | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Richard Palethorpe Aug. 10, 2018, 2:10 p.m. UTC | #1
Hello,

Sandeep Patil <sspatil@google.com> writes:

> /sys/power/wakeup_count semantics state that the read() for the file
> will block as long as there is a wakeup_event in progress. On most
> systems, this will be non deterministic and will result in extremely
> flaky test. Exclude the file from read_all_sys test for the same.
>
> Signed-off-by: Sandeep Patil <sspatil@google.com>
> ---
>  runtest/fs | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/runtest/fs b/runtest/fs
> index a66948a43..aca7e355f 100644
> --- a/runtest/fs
> +++ b/runtest/fs
> @@ -71,7 +71,7 @@ proc01 proc01 -m 128
>  
>  read_all_dev read_all -d /dev -p -q -r 10
>  read_all_proc read_all -d /proc -q -r 10
> -read_all_sys read_all -d /sys -q -r 10
> +read_all_sys read_all -d /sys -q -r 10 -e /sys/power/wakeup_count
>  

This probably won't be the only file with semantics like these. So I am
wondering if we can limit the time it spends blocking with timer_create
and SIGEV_THREAD_ID or something similar?
Sandeep Patil Aug. 13, 2018, 3:02 p.m. UTC | #2
On Fri, Aug 10, 2018 at 04:10:04PM +0200, Richard Palethorpe wrote:
> Hello,
> 
> Sandeep Patil <sspatil@google.com> writes:
> 
> > /sys/power/wakeup_count semantics state that the read() for the file
> > will block as long as there is a wakeup_event in progress. On most
> > systems, this will be non deterministic and will result in extremely
> > flaky test. Exclude the file from read_all_sys test for the same.
> >
> > Signed-off-by: Sandeep Patil <sspatil@google.com>
> > ---
> >  runtest/fs | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/runtest/fs b/runtest/fs
> > index a66948a43..aca7e355f 100644
> > --- a/runtest/fs
> > +++ b/runtest/fs
> > @@ -71,7 +71,7 @@ proc01 proc01 -m 128
> >  
> >  read_all_dev read_all -d /dev -p -q -r 10
> >  read_all_proc read_all -d /proc -q -r 10
> > -read_all_sys read_all -d /sys -q -r 10
> > +read_all_sys read_all -d /sys -q -r 10 -e /sys/power/wakeup_count
> >  
> 
> This probably won't be the only file with semantics like these. So I am
> wondering if we can limit the time it spends blocking with timer_create
> and SIGEV_THREAD_ID or something similar?

Well, I actually like the fact that this test goes and reads everything and
makes sure the kernel operations for those files are "sane". We ended up
finding 2 different bugs due to this in the drivers, in 1 case it crashed the
kernel and in the other the test halted forever until timeout.

So, unless the upstream ABI says the semantics are different for some files,
I don't think we should do this. 'wakeup_count' is the one I found and after
I exclude this, the test passes just fine on Pixel phones for example.
(Including the debugfs mount point under /sys/kernel/debug).

I say we wait for another case of exclusion show up before considering your
approach as I think we will miss real problem if we start timing out. Plus,
there is the question of whether we report the test as PASS / FAIL in those
cases. The exclusion list is the right approach IMO. We may just have to
figure out how to add more than one in the command line as they show up.

Agree?

- ssp

> 
> -- 
> Thank you,
> Richard.
> 
> -- 
> You received this message because you are subscribed to the Google Groups "kernel-team" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to kernel-team+unsubscribe@android.com.
>
Richard Palethorpe Aug. 14, 2018, 7:48 a.m. UTC | #3
Hello Sandeep,

Sandeep Patil <sspatil@google.com> writes:

> On Fri, Aug 10, 2018 at 04:10:04PM +0200, Richard Palethorpe wrote:
>> Hello,
>>
>> Sandeep Patil <sspatil@google.com> writes:
>>
>> > /sys/power/wakeup_count semantics state that the read() for the file
>> > will block as long as there is a wakeup_event in progress. On most
>> > systems, this will be non deterministic and will result in extremely
>> > flaky test. Exclude the file from read_all_sys test for the same.
>> >
>> > Signed-off-by: Sandeep Patil <sspatil@google.com>
>> > ---
>> >  runtest/fs | 2 +-
>> >  1 file changed, 1 insertion(+), 1 deletion(-)
>> >
>> > diff --git a/runtest/fs b/runtest/fs
>> > index a66948a43..aca7e355f 100644
>> > --- a/runtest/fs
>> > +++ b/runtest/fs
>> > @@ -71,7 +71,7 @@ proc01 proc01 -m 128
>> >
>> >  read_all_dev read_all -d /dev -p -q -r 10
>> >  read_all_proc read_all -d /proc -q -r 10
>> > -read_all_sys read_all -d /sys -q -r 10
>> > +read_all_sys read_all -d /sys -q -r 10 -e /sys/power/wakeup_count
>> >
>>
>> This probably won't be the only file with semantics like these. So I am
>> wondering if we can limit the time it spends blocking with timer_create
>> and SIGEV_THREAD_ID or something similar?
>
> Well, I actually like the fact that this test goes and reads everything and
> makes sure the kernel operations for those files are "sane". We ended up
> finding 2 different bugs due to this in the drivers, in 1 case it crashed the
> kernel and in the other the test halted forever until timeout.

This is good to know.

>
> So, unless the upstream ABI says the semantics are different for some files,
> I don't think we should do this. 'wakeup_count' is the one I found and after
> I exclude this, the test passes just fine on Pixel phones for example.
> (Including the debugfs mount point under /sys/kernel/debug).
>
> I say we wait for another case of exclusion show up before considering your
> approach as I think we will miss real problem if we start timing out. Plus,
> there is the question of whether we report the test as PASS / FAIL in those
> cases. The exclusion list is the right approach IMO. We may just have to
> figure out how to add more than one in the command line as they show up.
>
> Agree?
>

Yes, but possibly we should add a feature which allows us to annotate some
file's. Then we can mark this file as 'can_block', so if we do timeout
while reading it then we still know to PASS. Whereas for other files, we
can FAIL if it blocks. We discussed doing something like this
previously, but decided to wait for feedback before trying anything like
this. We already had to drop privileges due to /dev/watchdog, but
annotations could allow us to avoid this as well. This could perhaps go
into read_all02 and read_all01 just continues to use an exclude list and
drop privs.

I would be happy to implement said feature, but it may take a while. In
the meantime I'm not against merging this patch and waiting for another
file with similar problems to appear.

What do you think Metan? We could probably replace proc01 with
read_all02 as well.

> - ssp
>
>>
>> --
>> Thank you,
>> Richard.
>>
>> --
>> You received this message because you are subscribed to the Google Groups "kernel-team" group.
>> To unsubscribe from this group and stop receiving emails from it, send an email to kernel-team+unsubscribe@android.com.
>>


--
Thank you,
Richard.
Cyril Hrubis Aug. 14, 2018, 3:16 p.m. UTC | #4
Hi!
> > So, unless the upstream ABI says the semantics are different for some files,
> > I don't think we should do this. 'wakeup_count' is the one I found and after
> > I exclude this, the test passes just fine on Pixel phones for example.
> > (Including the debugfs mount point under /sys/kernel/debug).
> >
> > I say we wait for another case of exclusion show up before considering your
> > approach as I think we will miss real problem if we start timing out. Plus,
> > there is the question of whether we report the test as PASS / FAIL in those
> > cases. The exclusion list is the right approach IMO. We may just have to
> > figure out how to add more than one in the command line as they show up.
> >
> > Agree?
> >
> 
> Yes, but possibly we should add a feature which allows us to annotate some
> file's. Then we can mark this file as 'can_block', so if we do timeout
> while reading it then we still know to PASS. Whereas for other files, we
> can FAIL if it blocks. We discussed doing something like this
> previously, but decided to wait for feedback before trying anything like
> this. We already had to drop privileges due to /dev/watchdog, but
> annotations could allow us to avoid this as well. This could perhaps go
> into read_all02 and read_all01 just continues to use an exclude list and
> drop privs.
> 
> I would be happy to implement said feature, but it may take a while. In
> the meantime I'm not against merging this patch and waiting for another
> file with similar problems to appear.

Sounds good, I will apply this band aid for now, then we can look into
better solutions.

> What do you think Metan? We could probably replace proc01 with
> read_all02 as well.

Sounds good as well.
Sandeep Patil Aug. 20, 2018, 4:06 p.m. UTC | #5
On Tue, Aug 14, 2018 at 09:48:03AM +0200, Richard Palethorpe wrote:
> Hello Sandeep,
> 
> Sandeep Patil <sspatil@google.com> writes:
> 
> > On Fri, Aug 10, 2018 at 04:10:04PM +0200, Richard Palethorpe wrote:
> >> Hello,
> >>
> >> Sandeep Patil <sspatil@google.com> writes:
> >>
> >> > /sys/power/wakeup_count semantics state that the read() for the file
> >> > will block as long as there is a wakeup_event in progress. On most
> >> > systems, this will be non deterministic and will result in extremely
> >> > flaky test. Exclude the file from read_all_sys test for the same.
> >> >
> >> > Signed-off-by: Sandeep Patil <sspatil@google.com>
> >> > ---
> >> >  runtest/fs | 2 +-
> >> >  1 file changed, 1 insertion(+), 1 deletion(-)
> >> >
> >> > diff --git a/runtest/fs b/runtest/fs
> >> > index a66948a43..aca7e355f 100644
> >> > --- a/runtest/fs
> >> > +++ b/runtest/fs
> >> > @@ -71,7 +71,7 @@ proc01 proc01 -m 128
> >> >
> >> >  read_all_dev read_all -d /dev -p -q -r 10
> >> >  read_all_proc read_all -d /proc -q -r 10
> >> > -read_all_sys read_all -d /sys -q -r 10
> >> > +read_all_sys read_all -d /sys -q -r 10 -e /sys/power/wakeup_count
> >> >
> >>
> >> This probably won't be the only file with semantics like these. So I am
> >> wondering if we can limit the time it spends blocking with timer_create
> >> and SIGEV_THREAD_ID or something similar?
> >
> > Well, I actually like the fact that this test goes and reads everything and
> > makes sure the kernel operations for those files are "sane". We ended up
> > finding 2 different bugs due to this in the drivers, in 1 case it crashed the
> > kernel and in the other the test halted forever until timeout.
> 
> This is good to know.
> 
> >
> > So, unless the upstream ABI says the semantics are different for some files,
> > I don't think we should do this. 'wakeup_count' is the one I found and after
> > I exclude this, the test passes just fine on Pixel phones for example.
> > (Including the debugfs mount point under /sys/kernel/debug).
> >
> > I say we wait for another case of exclusion show up before considering your
> > approach as I think we will miss real problem if we start timing out. Plus,
> > there is the question of whether we report the test as PASS / FAIL in those
> > cases. The exclusion list is the right approach IMO. We may just have to
> > figure out how to add more than one in the command line as they show up.
> >
> > Agree?
> >
> 
> Yes, but possibly we should add a feature which allows us to annotate some
> file's. Then we can mark this file as 'can_block', so if we do timeout
> while reading it then we still know to PASS. Whereas for other files, we
> can FAIL if it blocks. We discussed doing something like this
> previously, but decided to wait for feedback before trying anything like
> this. We already had to drop privileges due to /dev/watchdog, but
> annotations could allow us to avoid this as well. This could perhaps go
> into read_all02 and read_all01 just continues to use an exclude list and
> drop privs.

Oh, I like this idea too. Sounds reasonable to me.


> 
> I would be happy to implement said feature, but it may take a while.

Same here, I'll keep this in my queue though, please CC me if possible if you
get around to doing it before I do. I'd be happy to test and give feedback.

Thanks again
- ssp

> In
> the meantime I'm not against merging this patch and waiting for another
> file with similar problems to appear.
> 
> What do you think Metan? We could probably replace proc01 with
> read_all02 as well.
> 
> > - ssp
> >
> >>
> >> --
> >> Thank you,
> >> Richard.
> >>
> >> --
> >> You received this message because you are subscribed to the Google Groups "kernel-team" group.
> >> To unsubscribe from this group and stop receiving emails from it, send an email to kernel-team+unsubscribe@android.com.
> >>
> 
> 
> --
> Thank you,
> Richard.
diff mbox series

Patch

diff --git a/runtest/fs b/runtest/fs
index a66948a43..aca7e355f 100644
--- a/runtest/fs
+++ b/runtest/fs
@@ -71,7 +71,7 @@  proc01 proc01 -m 128
 
 read_all_dev read_all -d /dev -p -q -r 10
 read_all_proc read_all -d /proc -q -r 10
-read_all_sys read_all -d /sys -q -r 10
+read_all_sys read_all -d /sys -q -r 10 -e /sys/power/wakeup_count
 
 #Run the File System Race Condition Check tests as well
 fs_racer fs_racer.sh -t 5