Message ID | 20180806123445.1459-6-peter.maydell@linaro.org |
---|---|
State | Accepted |
Commit | 341823c172168a6d2765937aaea635f5136c5aa9 |
Headers | show |
Series | Arm migration fixes for 3.0 | expand |
* Peter Maydell (peter.maydell@linaro.org) wrote: > The code currently in gicv3_gicd_no_migration_shift_bug_post_load() > that handles migration from older QEMU versions with a particular > bug is misplaced. We need to run this after migration in all cases, > not just the cases where the "arm_gicv3/gicd_no_migration_shift_bug" > subsection is present, so it must go in a post_load hook for the > top level VMSD, not for the subsection. Move it. > > Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> > --- > hw/intc/arm_gicv3_common.c | 77 ++++++++++++++++++-------------------- > 1 file changed, 37 insertions(+), 40 deletions(-) > > diff --git a/hw/intc/arm_gicv3_common.c b/hw/intc/arm_gicv3_common.c > index 8175889f1e7..52480c3b4cf 100644 > --- a/hw/intc/arm_gicv3_common.c > +++ b/hw/intc/arm_gicv3_common.c > @@ -29,6 +29,41 @@ > #include "hw/arm/linux-boot-if.h" > #include "sysemu/kvm.h" > > + > +static void gicv3_gicd_no_migration_shift_bug_post_load(GICv3State *cs) > +{ > + if (cs->gicd_no_migration_shift_bug) { > + return; > + } > + > + /* Older versions of QEMU had a bug in the handling of state save/restore > + * to the KVM GICv3: they got the offset in the bitmap arrays wrong, > + * so that instead of the data for external interrupts 32 and up > + * starting at bit position 32 in the bitmap, it started at bit > + * position 64. If we're receiving data from a QEMU with that bug, > + * we must move the data down into the right place. > + */ > + memmove(cs->group, (uint8_t *)cs->group + GIC_INTERNAL / 8, > + sizeof(cs->group) - GIC_INTERNAL / 8); > + memmove(cs->grpmod, (uint8_t *)cs->grpmod + GIC_INTERNAL / 8, > + sizeof(cs->grpmod) - GIC_INTERNAL / 8); > + memmove(cs->enabled, (uint8_t *)cs->enabled + GIC_INTERNAL / 8, > + sizeof(cs->enabled) - GIC_INTERNAL / 8); > + memmove(cs->pending, (uint8_t *)cs->pending + GIC_INTERNAL / 8, > + sizeof(cs->pending) - GIC_INTERNAL / 8); > + memmove(cs->active, (uint8_t *)cs->active + GIC_INTERNAL / 8, > + sizeof(cs->active) - GIC_INTERNAL / 8); > + memmove(cs->edge_trigger, (uint8_t *)cs->edge_trigger + GIC_INTERNAL / 8, > + sizeof(cs->edge_trigger) - GIC_INTERNAL / 8); > + > + /* > + * While this new version QEMU doesn't have this kind of bug as we fix it, > + * so it needs to set the flag to true to indicate that and it's necessary > + * for next migration to work from this new version QEMU. > + */ > + cs->gicd_no_migration_shift_bug = true; > +} > + > static int gicv3_pre_save(void *opaque) > { > GICv3State *s = (GICv3State *)opaque; > @@ -46,6 +81,8 @@ static int gicv3_post_load(void *opaque, int version_id) > GICv3State *s = (GICv3State *)opaque; > ARMGICv3CommonClass *c = ARM_GICV3_COMMON_GET_CLASS(s); > > + gicv3_gicd_no_migration_shift_bug_post_load(s); > + > if (c->post_load) { > c->post_load(s); > } > @@ -161,45 +198,6 @@ static int gicv3_pre_load(void *opaque) > return 0; > } > > -static int gicv3_gicd_no_migration_shift_bug_post_load(void *opaque, > - int version_id) > -{ > - GICv3State *cs = opaque; > - > - if (cs->gicd_no_migration_shift_bug) { > - return 0; > - } > - > - /* Older versions of QEMU had a bug in the handling of state save/restore > - * to the KVM GICv3: they got the offset in the bitmap arrays wrong, > - * so that instead of the data for external interrupts 32 and up > - * starting at bit position 32 in the bitmap, it started at bit > - * position 64. If we're receiving data from a QEMU with that bug, > - * we must move the data down into the right place. > - */ > - memmove(cs->group, (uint8_t *)cs->group + GIC_INTERNAL / 8, > - sizeof(cs->group) - GIC_INTERNAL / 8); > - memmove(cs->grpmod, (uint8_t *)cs->grpmod + GIC_INTERNAL / 8, > - sizeof(cs->grpmod) - GIC_INTERNAL / 8); > - memmove(cs->enabled, (uint8_t *)cs->enabled + GIC_INTERNAL / 8, > - sizeof(cs->enabled) - GIC_INTERNAL / 8); > - memmove(cs->pending, (uint8_t *)cs->pending + GIC_INTERNAL / 8, > - sizeof(cs->pending) - GIC_INTERNAL / 8); > - memmove(cs->active, (uint8_t *)cs->active + GIC_INTERNAL / 8, > - sizeof(cs->active) - GIC_INTERNAL / 8); > - memmove(cs->edge_trigger, (uint8_t *)cs->edge_trigger + GIC_INTERNAL / 8, > - sizeof(cs->edge_trigger) - GIC_INTERNAL / 8); > - > - /* > - * While this new version QEMU doesn't have this kind of bug as we fix it, > - * so it needs to set the flag to true to indicate that and it's necessary > - * for next migration to work from this new version QEMU. > - */ > - cs->gicd_no_migration_shift_bug = true; > - > - return 0; > -} > - > static bool needed_always(void *opaque) > { > return true; > @@ -210,7 +208,6 @@ const VMStateDescription vmstate_gicv3_gicd_no_migration_shift_bug = { > .version_id = 1, > .minimum_version_id = 1, > .needed = needed_always, > - .post_load = gicv3_gicd_no_migration_shift_bug_post_load, > .fields = (VMStateField[]) { > VMSTATE_BOOL(gicd_no_migration_shift_bug, GICv3State), > VMSTATE_END_OF_LIST() > -- > 2.17.1 > -- Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
diff --git a/hw/intc/arm_gicv3_common.c b/hw/intc/arm_gicv3_common.c index 8175889f1e7..52480c3b4cf 100644 --- a/hw/intc/arm_gicv3_common.c +++ b/hw/intc/arm_gicv3_common.c @@ -29,6 +29,41 @@ #include "hw/arm/linux-boot-if.h" #include "sysemu/kvm.h" + +static void gicv3_gicd_no_migration_shift_bug_post_load(GICv3State *cs) +{ + if (cs->gicd_no_migration_shift_bug) { + return; + } + + /* Older versions of QEMU had a bug in the handling of state save/restore + * to the KVM GICv3: they got the offset in the bitmap arrays wrong, + * so that instead of the data for external interrupts 32 and up + * starting at bit position 32 in the bitmap, it started at bit + * position 64. If we're receiving data from a QEMU with that bug, + * we must move the data down into the right place. + */ + memmove(cs->group, (uint8_t *)cs->group + GIC_INTERNAL / 8, + sizeof(cs->group) - GIC_INTERNAL / 8); + memmove(cs->grpmod, (uint8_t *)cs->grpmod + GIC_INTERNAL / 8, + sizeof(cs->grpmod) - GIC_INTERNAL / 8); + memmove(cs->enabled, (uint8_t *)cs->enabled + GIC_INTERNAL / 8, + sizeof(cs->enabled) - GIC_INTERNAL / 8); + memmove(cs->pending, (uint8_t *)cs->pending + GIC_INTERNAL / 8, + sizeof(cs->pending) - GIC_INTERNAL / 8); + memmove(cs->active, (uint8_t *)cs->active + GIC_INTERNAL / 8, + sizeof(cs->active) - GIC_INTERNAL / 8); + memmove(cs->edge_trigger, (uint8_t *)cs->edge_trigger + GIC_INTERNAL / 8, + sizeof(cs->edge_trigger) - GIC_INTERNAL / 8); + + /* + * While this new version QEMU doesn't have this kind of bug as we fix it, + * so it needs to set the flag to true to indicate that and it's necessary + * for next migration to work from this new version QEMU. + */ + cs->gicd_no_migration_shift_bug = true; +} + static int gicv3_pre_save(void *opaque) { GICv3State *s = (GICv3State *)opaque; @@ -46,6 +81,8 @@ static int gicv3_post_load(void *opaque, int version_id) GICv3State *s = (GICv3State *)opaque; ARMGICv3CommonClass *c = ARM_GICV3_COMMON_GET_CLASS(s); + gicv3_gicd_no_migration_shift_bug_post_load(s); + if (c->post_load) { c->post_load(s); } @@ -161,45 +198,6 @@ static int gicv3_pre_load(void *opaque) return 0; } -static int gicv3_gicd_no_migration_shift_bug_post_load(void *opaque, - int version_id) -{ - GICv3State *cs = opaque; - - if (cs->gicd_no_migration_shift_bug) { - return 0; - } - - /* Older versions of QEMU had a bug in the handling of state save/restore - * to the KVM GICv3: they got the offset in the bitmap arrays wrong, - * so that instead of the data for external interrupts 32 and up - * starting at bit position 32 in the bitmap, it started at bit - * position 64. If we're receiving data from a QEMU with that bug, - * we must move the data down into the right place. - */ - memmove(cs->group, (uint8_t *)cs->group + GIC_INTERNAL / 8, - sizeof(cs->group) - GIC_INTERNAL / 8); - memmove(cs->grpmod, (uint8_t *)cs->grpmod + GIC_INTERNAL / 8, - sizeof(cs->grpmod) - GIC_INTERNAL / 8); - memmove(cs->enabled, (uint8_t *)cs->enabled + GIC_INTERNAL / 8, - sizeof(cs->enabled) - GIC_INTERNAL / 8); - memmove(cs->pending, (uint8_t *)cs->pending + GIC_INTERNAL / 8, - sizeof(cs->pending) - GIC_INTERNAL / 8); - memmove(cs->active, (uint8_t *)cs->active + GIC_INTERNAL / 8, - sizeof(cs->active) - GIC_INTERNAL / 8); - memmove(cs->edge_trigger, (uint8_t *)cs->edge_trigger + GIC_INTERNAL / 8, - sizeof(cs->edge_trigger) - GIC_INTERNAL / 8); - - /* - * While this new version QEMU doesn't have this kind of bug as we fix it, - * so it needs to set the flag to true to indicate that and it's necessary - * for next migration to work from this new version QEMU. - */ - cs->gicd_no_migration_shift_bug = true; - - return 0; -} - static bool needed_always(void *opaque) { return true; @@ -210,7 +208,6 @@ const VMStateDescription vmstate_gicv3_gicd_no_migration_shift_bug = { .version_id = 1, .minimum_version_id = 1, .needed = needed_always, - .post_load = gicv3_gicd_no_migration_shift_bug_post_load, .fields = (VMStateField[]) { VMSTATE_BOOL(gicd_no_migration_shift_bug, GICv3State), VMSTATE_END_OF_LIST()
The code currently in gicv3_gicd_no_migration_shift_bug_post_load() that handles migration from older QEMU versions with a particular bug is misplaced. We need to run this after migration in all cases, not just the cases where the "arm_gicv3/gicd_no_migration_shift_bug" subsection is present, so it must go in a post_load hook for the top level VMSD, not for the subsection. Move it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gicv3_common.c | 77 ++++++++++++++++++-------------------- 1 file changed, 37 insertions(+), 40 deletions(-) -- 2.17.1