diff mbox series

[v3,2/6] doc: usb: ci-hdrc-usb2: Add pinctrl properties definition

Message ID 1536074340-14840-2-git-send-email-loic.poulain@linaro.org
State Accepted
Commit 1fa9697c85382ef6aebc49384f6143a7c0af3745
Headers show
Series [v3,1/6] usb: chipidea: Add dynamic pinctrl selection | expand

Commit Message

Loic Poulain Sept. 4, 2018, 3:18 p.m. UTC
Some hardware implementations require to configure pins differently
according to the USB role (host/device), this can be an update of the
pins routing or a simple GPIO value change.

This patch introduces new optional "host" and "device" pinctrls.
If these pinctrls are defined by the device, they are respectively
selected on host/device role start.

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>

---
 v2: Add new pin modes documentation (host, device)
 v3: rebase on usb-next

 Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt | 2 ++
 1 file changed, 2 insertions(+)

-- 
2.7.4
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
index 2e93181..529e518 100644
--- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
+++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
@@ -80,6 +80,8 @@  Optional properties:
   controller. It's expected that a mux state of 0 indicates device mode and a
   mux state of 1 indicates host mode.
 - mux-control-names: Shall be "usb_switch" if mux-controls is specified.
+- pinctrl-names: Names for optional pin modes in "default", "host", "device"
+- pinctrl-n: alternate pin modes
 
 i.mx specific properties
 - fsl,usbmisc: phandler of non-core register device, with one