diff mbox series

[v2] gpio: of: Handle SPI chipselect legacy bindings

Message ID 20180906143017.11649-1-linus.walleij@linaro.org
State Accepted
Commit 6953c57ab1721ce57914fc5741d0ce0568756bb0
Headers show
Series [v2] gpio: of: Handle SPI chipselect legacy bindings | expand

Commit Message

Linus Walleij Sept. 6, 2018, 2:30 p.m. UTC
The SPI chipselects are assumed to be active low in the current
binding, so when we want to use GPIO descriptors and handle
the active low/high semantics in gpiolib, we need a special
parsing quirk to deal with this.

We check for the property "spi-cs-high" and if that is
NOT present we assume the CS line is active low.

If the line is tagged as active low in the device tree and
has no "spi-cs-high" property all is fine, the device
tree and the SPI bindings are in agreement.

If the line is tagged as active high in the device tree with
the second cell flag and has no "spi-cs-high" property we
enforce active low semantics (as this is the exception we can
just tag on the flag).

If the line is tagged as active low with the second cell flag
AND tagged with "spi-cs-high" the SPI active high property
takes precedence and we print a warning.

Cc: Mark Brown <broonie@kernel.org>
Cc: linux-spi@vger.kernel.org
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

---
ChangeLog v1->v2:
- Fix the property name in the commit message.
- Print an info that we enforce active low on CS
This will be merged as a precursor to a series switching
over to using GPIO descriptors for chip select handling
in the SPI subsystem. Currently no descriptors are used
for chip selects so the impact will be zero until we start
switching drivers over.
---
 drivers/gpio/gpiolib-of.c | 49 +++++++++++++++++++++++++++++++++++++--
 1 file changed, 47 insertions(+), 2 deletions(-)

-- 
2.17.1
diff mbox series

Patch

diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
index a4f1157d6aa0..a4e07a2a2570 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -57,7 +57,8 @@  static struct gpio_desc *of_xlate_and_get_gpiod_flags(struct gpio_chip *chip,
 }
 
 static void of_gpio_flags_quirks(struct device_node *np,
-				 enum of_gpio_flags *flags)
+				 enum of_gpio_flags *flags,
+				 int index)
 {
 	/*
 	 * Some GPIO fixed regulator quirks.
@@ -91,6 +92,50 @@  static void of_gpio_flags_quirks(struct device_node *np,
 		pr_info("%s uses legacy open drain flag - update the DTS if you can\n",
 			of_node_full_name(np));
 	}
+
+	/*
+	 * Legacy handling of SPI active high chip select. If we have a
+	 * property named "cs-gpios" we need to inspect the child node
+	 * to determine if the flags should have inverted semantics.
+	 */
+	if (IS_ENABLED(CONFIG_SPI_MASTER) &&
+	    of_property_read_bool(np, "cs-gpios")) {
+		struct device_node *child;
+		u32 cs;
+		int ret;
+
+		for_each_child_of_node(np, child) {
+			ret = of_property_read_u32(child, "reg", &cs);
+			if (!ret)
+				continue;
+			if (cs == index) {
+				/*
+				 * SPI children have active low chip selects
+				 * by default. This can be specified negatively
+				 * by just omitting "spi-cs-high" in the
+				 * device node, or actively by tagging on
+				 * GPIO_ACTIVE_LOW as flag in the device
+				 * tree. If the line is simultaneously
+				 * tagged as active low in the device tree
+				 * and has the "spi-cs-high" set, we get a
+				 * conflict and the "spi-cs-high" flag will
+				 * take precedence.
+				 */
+				if (of_property_read_bool(np, "spi-cs-high")) {
+					if (*flags & OF_GPIO_ACTIVE_LOW) {
+						pr_warn("%s GPIO handle specifies active low - ignored\n",
+							of_node_full_name(np));
+						*flags &= ~OF_GPIO_ACTIVE_LOW;
+					}
+				} else {
+					if (!(*flags & OF_GPIO_ACTIVE_LOW))
+						pr_info("%s enforce active low on chipselect handle\n");
+					*flags |= OF_GPIO_ACTIVE_LOW;
+				}
+				break;
+			}
+		}
+	}
 }
 
 /**
@@ -131,7 +176,7 @@  struct gpio_desc *of_get_named_gpiod_flags(struct device_node *np,
 		goto out;
 
 	if (flags)
-		of_gpio_flags_quirks(np, flags);
+		of_gpio_flags_quirks(np, flags, index);
 
 	pr_debug("%s: parsed '%s' property of node '%pOF[%d]' - status (%d)\n",
 		 __func__, propname, np, index,