diff mbox series

ARM: dts: lpc32xx: Fix SPI controller node names

Message ID 20180913181245.25484-9-robh@kernel.org
State Accepted
Commit 11236ef582b8d66290bb3b3710e03ca1d85d8ad8
Headers show
Series ARM: dts: lpc32xx: Fix SPI controller node names | expand

Commit Message

Rob Herring Sept. 13, 2018, 6:12 p.m. UTC
SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the
name enables dtc SPI bus checks.

Cc: Vladimir Zapolskiy <vz@mleia.com>
Cc: Sylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

---

 arch/arm/boot/dts/lpc32xx.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

-- 
2.17.1

Comments

Rob Herring Sept. 26, 2018, 11:12 p.m. UTC | #1
On Thu, Sep 13, 2018 at 1:12 PM Rob Herring <robh@kernel.org> wrote:
>

> SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the

> name enables dtc SPI bus checks.

>

> Cc: Vladimir Zapolskiy <vz@mleia.com>

> Cc: Sylvain Lemieux <slemieux.tyco@gmail.com>

> Signed-off-by: Rob Herring <robh@kernel.org>

> ---


Ping.

Arnd, Olof, Can you pick this up if the sub-arch maintainer doesn't.

Rob
Arnd Bergmann Sept. 28, 2018, 10:34 a.m. UTC | #2
On Thu, Sep 13, 2018 at 8:12 PM Rob Herring <robh@kernel.org> wrote:
>

> SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the

> name enables dtc SPI bus checks.

>

> Cc: Vladimir Zapolskiy <vz@mleia.com>

> Cc: Sylvain Lemieux <slemieux.tyco@gmail.com>

> Signed-off-by: Rob Herring <robh@kernel.org>


Applied, thanks!

      Arnd
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
index abff7ef7c9cd..b7303a4e4236 100644
--- a/arch/arm/boot/dts/lpc32xx.dtsi
+++ b/arch/arm/boot/dts/lpc32xx.dtsi
@@ -179,7 +179,7 @@ 
 			 * ssp0 and spi1 are shared pins;
 			 * enable one in your board dts, as needed.
 			 */
-			ssp0: ssp@20084000 {
+			ssp0: spi@20084000 {
 				compatible = "arm,pl022", "arm,primecell";
 				reg = <0x20084000 0x1000>;
 				interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
@@ -199,7 +199,7 @@ 
 			 * ssp1 and spi2 are shared pins;
 			 * enable one in your board dts, as needed.
 			 */
-			ssp1: ssp@2008c000 {
+			ssp1: spi@2008c000 {
 				compatible = "arm,pl022", "arm,primecell";
 				reg = <0x2008c000 0x1000>;
 				interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;