| Message ID | 20180913181245.25484-10-robh@kernel.org |
|---|---|
| State | Accepted |
| Commit | 2f967f9e9fa076affb711da1a8389b5d33814fc6 |
| Headers | show |
| Series | ARM: dts: ste: Fix SPI controller node names | expand |
On Thu, Sep 13, 2018 at 11:12 AM Rob Herring <robh@kernel.org> wrote: > SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the > name enables dtc SPI bus checks. > > Cc: Linus Walleij <linus.walleij@linaro.org> > Signed-off-by: Rob Herring <robh@kernel.org> Applied to the ux500 tree, thanks! Yours, Linus Walleij
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index 2310a4e97768..8b5288172085 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -878,7 +878,7 @@ power-domains = <&pm_domains DOMAIN_VAPE>; }; - ssp@80002000 { + spi@80002000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x80002000 0x1000>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; @@ -892,7 +892,7 @@ power-domains = <&pm_domains DOMAIN_VAPE>; }; - ssp@80003000 { + spi@80003000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x80003000 0x1000>; interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi index 3f14b4df69b4..94eeb7f1c947 100644 --- a/arch/arm/boot/dts/ste-hrefprev60.dtsi +++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi @@ -57,7 +57,7 @@ }; }; - ssp@80002000 { + spi@80002000 { /* * On the first generation boards, this SSP/SPI port was connected * to the AB8500. diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index b0b94d053098..603890461ae0 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -376,7 +376,7 @@ pinctrl-1 = <&i2c3_sleep_mode>; }; - ssp@80002000 { + spi@80002000 { pinctrl-names = "default"; pinctrl-0 = <&ssp0_snowball_mode>; }; diff --git a/arch/arm/boot/dts/ste-u300.dts b/arch/arm/boot/dts/ste-u300.dts index 62ecb6a2fa39..1bd1aba3322f 100644 --- a/arch/arm/boot/dts/ste-u300.dts +++ b/arch/arm/boot/dts/ste-u300.dts @@ -442,7 +442,7 @@ dma-names = "rx"; }; - spi: ssp@c0006000 { + spi: spi@c0006000 { compatible = "arm,pl022", "arm,primecell"; reg = <0xc0006000 0x1000>; interrupt-parent = <&vica>;
SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the name enables dtc SPI bus checks. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> --- Please apply to the sub-arch tree. The dtc changes haven't landed, but will for 4.20. arch/arm/boot/dts/ste-dbx5x0.dtsi | 4 ++-- arch/arm/boot/dts/ste-hrefprev60.dtsi | 2 +- arch/arm/boot/dts/ste-snowball.dts | 2 +- arch/arm/boot/dts/ste-u300.dts | 2 +- 4 files changed, 5 insertions(+), 5 deletions(-) -- 2.17.1