@@ -129,7 +129,7 @@ AEAD algorithms:
Supported DPAA2 SoCs
--------------------
-* LS2080A/LS2040A
+* LS2160A
* LS2084A/LS2044A
* LS2088A/LS2048A
* LS1088A/LS1048A
@@ -157,31 +157,15 @@ Prerequisites
DPAA2_SEC driver has similar pre-requisites as described in :ref:`dpaa2_overview`.
The following dependencies are not part of DPDK and must be installed separately:
-* **NXP Linux SDK**
-
- NXP Linux software development kit (SDK) includes support for the family
- of QorIQ® ARM-Architecture-based system on chip (SoC) processors
- and corresponding boards.
-
- It includes the Linux board support packages (BSPs) for NXP SoCs,
- a fully operational tool chain, kernel and board specific modules.
-
- SDK and related information can be obtained from: `NXP QorIQ SDK <http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX>`_.
-
-* **DPDK Extra Scripts**
-
- DPAA2 based resources can be configured easily with the help of ready scripts
- as provided in the DPDK helper repository.
-
- `DPDK Extra Scripts <https://github.com/qoriq-open-source/dpdk-extras>`_.
+See :doc:`../platform/dpaa2` for setup information
Currently supported by DPDK:
-* NXP SDK **17.08+**.
-* MC Firmware version **10.3.1** and higher.
-* Supported architectures: **arm64 LE**.
+- NXP SDK **18.09+**.
+- MC Firmware version **10.10.0** and higher.
+- Supported architectures: **arm64 LE**.
-* Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup the basic DPDK environment.
+- Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup the basic DPDK environment.
Pre-Installation Configuration
------------------------------
@@ -26,7 +26,7 @@ The DPAA2 EVENTDEV implements many features in the eventdev API;
Supported DPAA2 SoCs
--------------------
-- LS2080A/LS2040A
+- LX2160A
- LS2084A/LS2044A
- LS2088A/LS2048A
- LS1088A/LS1048A
@@ -34,52 +34,12 @@ Supported DPAA2 SoCs
Prerequisites
-------------
-There are three main pre-requisities for executing DPAA2 EVENTDEV on a DPAA2
-compatible board:
-
-1. **ARM 64 Tool Chain**
-
- For example, the `*aarch64* Linaro Toolchain <https://releases.linaro.org/components/toolchain/binaries/4.9-2017.01/aarch64-linux-gnu>`_.
-
-2. **Linux Kernel**
-
- It can be obtained from `NXP's Github hosting <https://github.com/qoriq-open-source/linux>`_.
-
-3. **Rootfile system**
-
- Any *aarch64* supporting filesystem can be used. For example,
- Ubuntu 15.10 (Wily) or 16.04 LTS (Xenial) userland which can be obtained
- from `here <http://cdimage.ubuntu.com/ubuntu-base/releases/16.04/release/ubuntu-base-16.04.1-base-arm64.tar.gz>`_.
-
-As an alternative method, DPAA2 EVENTDEV can also be executed using images provided
-as part of SDK from NXP. The SDK includes all the above prerequisites necessary
-to bring up a DPAA2 board.
-
-The following dependencies are not part of DPDK and must be installed
-separately:
-
-- **NXP Linux SDK**
-
- NXP Linux software development kit (SDK) includes support for family
- of QorIQ® ARM-Architecture-based system on chip (SoC) processors
- and corresponding boards.
-
- It includes the Linux board support packages (BSPs) for NXP SoCs,
- a fully operational tool chain, kernel and board specific modules.
-
- SDK and related information can be obtained from: `NXP QorIQ SDK <http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX>`_.
-
-- **DPDK Extra Scripts**
-
- DPAA2 based resources can be configured easily with the help of ready scripts
- as provided in the DPDK Extra repository.
-
- `DPDK Extras Scripts <https://github.com/qoriq-open-source/dpdk-extras>`_.
+See :doc:`../platform/dpaa2` for setup information
Currently supported by DPDK:
-- NXP SDK **2.0+**.
-- MC Firmware version **10.0.0** and higher.
+- NXP SDK **18.09+**.
+- MC Firmware version **10.10.0** and higher.
- Supported architectures: **arm64 LE**.
- Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup the basic DPDK environment.
@@ -155,4 +115,4 @@ DPAA2 drivers for DPDK can only work on NXP SoCs as listed in the
Port-core binding
~~~~~~~~~~~~~~~~~
-DPAA2 EVENTDEV driver requires event port 'x' to be used on core 'x'.
+DPAA2 EVENTDEV can support only one eventport per core.
@@ -409,8 +409,7 @@ Features of the DPAA2 PMD are:
Supported DPAA2 SoCs
--------------------
-
-- LS2080A/LS2040A
+- LX2160A
- LS2084A/LS2044A
- LS2088A/LS2048A
- LS1088A/LS1048A
@@ -418,52 +417,12 @@ Supported DPAA2 SoCs
Prerequisites
-------------
-There are three main pre-requisities for executing DPAA2 PMD on a DPAA2
-compatible board:
-
-1. **ARM 64 Tool Chain**
-
- For example, the `*aarch64* Linaro Toolchain <https://releases.linaro.org/components/toolchain/binaries/6.4-2017.08/aarch64-linux-gnu/>`_.
-
-2. **Linux Kernel**
-
- It can be obtained from `NXP's Github hosting <https://github.com/qoriq-open-source/linux>`_.
-
-3. **Rootfile system**
-
- Any *aarch64* supporting filesystem can be used. For example,
- Ubuntu 15.10 (Wily) or 16.04 LTS (Xenial) userland which can be obtained
- from `here <http://cdimage.ubuntu.com/ubuntu-base/releases/16.04/release/ubuntu-base-16.04.1-base-arm64.tar.gz>`_.
-
-As an alternative method, DPAA2 PMD can also be executed using images provided
-as part of SDK from NXP. The SDK includes all the above prerequisites necessary
-to bring up a DPAA2 board.
-
-The following dependencies are not part of DPDK and must be installed
-separately:
-
-- **NXP Linux SDK**
-
- NXP Linux software development kit (SDK) includes support for family
- of QorIQ® ARM-Architecture-based system on chip (SoC) processors
- and corresponding boards.
-
- It includes the Linux board support packages (BSPs) for NXP SoCs,
- a fully operational tool chain, kernel and board specific modules.
-
- SDK and related information can be obtained from: `NXP QorIQ SDK <http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX>`_.
-
-- **DPDK Extra Scripts**
-
- DPAA2 based resources can be configured easily with the help of ready scripts
- as provided in the DPDK Extra repository.
-
- `DPDK Extras Scripts <https://github.com/qoriq-open-source/dpdk-extras>`_.
+See :doc:`../platform/dpaa2` for setup information
Currently supported by DPDK:
-- NXP SDK **17.08+**.
-- MC Firmware version **10.3.1** and higher.
+- NXP SDK **18.09+**.
+- MC Firmware version **10.10.0** and higher.
- Supported architectures: **arm64 LE**.
- Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup the basic DPDK environment.
new file mode 100644
@@ -0,0 +1,109 @@
+.. SPDX-License-Identifier: BSD-3-Clause
+ Copyright 2018 NXP
+
+NXP QorIQ DPAA2 Board Support Package
+=====================================
+
+This doc has information about steps to setup NXP QoriQ DPAA2 platform
+and information about common offload hw block drivers of
+**NXP QorIQ DPAA2** SoC family.
+
+Supported DPAA2 SoCs
+--------------------
+
+- LX2160A
+- LS2084A/LS2044A
+- LS2088A/LS2048A
+- LS1088A/LS1048A
+
+More information about SoC can be found at `NXP Official Website
+<https://www.nxp.com/products/processors-and-microcontrollers/arm-based-
+processors-and-mcus/qoriq-layerscape-arm-processors:QORIQ-ARM>`_.
+
+
+Common Offload HW Block Drivers
+-------------------------------
+
+1. **Nics Driver**
+
+ See :doc:`../nics/dpaa2` for NXP dpaa2 nic driver information.
+
+2. **Cryptodev Driver**
+
+ See :doc:`../cryptodevs/dpaa2_sec` for NXP dpaa2 cryptodev driver information.
+
+3. **Eventdev Driver**
+
+ See :doc:`../eventdevs/dpaa2` for NXP dpaa2 eventdev driver information.
+
+4. **Rawdev AIOP CMDIF Driver**
+
+ See :doc:`../rawdevs/dpaa2_cmdif` for NXP dpaa2 AIOP command interface driver information.
+
+5. **Rawdev QDMA Driver**
+
+ See :doc:`../rawdevs/dpaa2_qdma` for NXP dpaa2 QDMA driver information.
+
+
+Steps To Setup Platform
+-----------------------
+
+There are four main pre-requisities for executing DPAA2 PMD on a DPAA2
+compatible board:
+
+1. **ARM 64 Tool Chain**
+
+ For example, the `*aarch64* Linaro Toolchain <https://releases.linaro.org/components/toolchain/binaries/7.3-2018.05/aarch64-linux-gnu/gcc-linaro-7.3.1-2018.05-i686_aarch64-linux-gnu.tar.xz>`_.
+
+2. **Linux Kernel**
+
+ It can be obtained from `NXP's Github hosting <https://source.codeaurora.org/external/qoriq/qoriq-components/linux>`_.
+
+3. **Rootfile system**
+
+ Any *aarch64* supporting filesystem can be used. For example,
+ Ubuntu 16.04 LTS (Xenial) or 18.04 (Bionic) userland which can be obtained
+ from `here
+ <http://cdimage.ubuntu.com/ubuntu-base/releases/18.04/release/ubuntu-base-18.04.1-base-arm64.tar.gz>`_.
+
+4. **Resource Scripts**
+
+ DPAA2 based resources can be configured easily with the help of ready scripts
+ as provided in the DPDK Extra repository.
+
+As an alternative method, DPAA2 PMD can also be executed using images provided
+as part of SDK from NXP. The SDK includes all the above prerequisites necessary
+to bring up a DPAA2 board.
+
+The following dependencies are not part of DPDK and must be installed
+separately:
+
+- **NXP Linux SDK**
+
+ NXP Linux software development kit (SDK) includes support for family
+ of QorIQ® ARM-Architecture-based system on chip (SoC) processors
+ and corresponding boards.
+
+ It includes the Linux board support packages (BSPs) for NXP SoCs,
+ a fully operational tool chain, kernel and board specific modules.
+
+ SDK and related information can be obtained from: `NXP QorIQ SDK <http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX>`_.
+
+
+.. _extra_scripts:
+
+- **DPDK Extra Scripts**
+
+ DPAA2 based resources can be configured easily with the help of ready scripts
+ as provided in the DPDK Extra repository.
+
+ `DPDK Extras Scripts <https://source.codeaurora.org/external/qoriq/qoriq-components/dpdk-extras>`_.
+
+Currently supported by DPDK:
+
+- NXP SDK **2.0+** (preferred: LSDK 18.09).
+- MC Firmware version **10.10.0** and higher.
+- Supported architectures: **arm64 LE**.
+
+- Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>`
+ to setup the basic DPDK environment.
@@ -11,4 +11,5 @@ The following are platform specific guides and setup information.
:numbered:
dpaa
+ dpaa2
octeontx
@@ -29,52 +29,12 @@ Supported DPAA2 SoCs
Prerequisites
-------------
-There are three main pre-requisities for executing DPAA2 CMDIF on a DPAA2
-compatible board:
-
-1. **ARM 64 Tool Chain**
-
- For example, the `*aarch64* Linaro Toolchain <https://releases.linaro.org/components/toolchain/binaries/6.3-2017.02/aarch64-linux-gnu>`_.
-
-2. **Linux Kernel**
-
- It can be obtained from `NXP's Github hosting <https://github.com/qoriq-open-source/linux>`_.
-
-3. **Rootfile system**
-
- Any *aarch64* supporting filesystem can be used. For example,
- Ubuntu 15.10 (Wily) or 16.04 LTS (Xenial) userland which can be obtained
- from `here <http://cdimage.ubuntu.com/ubuntu-base/releases/16.04/release/ubuntu-base-16.04.1-base-arm64.tar.gz>`_.
-
-As an alternative method, DPAA2 CMDIF can also be executed using images provided
-as part of SDK from NXP. The SDK includes all the above prerequisites necessary
-to bring up a DPAA2 board.
-
-The following dependencies are not part of DPDK and must be installed
-separately:
-
-- **NXP Linux SDK**
-
- NXP Linux software development kit (SDK) includes support for family
- of QorIQ® ARM-Architecture-based system on chip (SoC) processors
- and corresponding boards.
-
- It includes the Linux board support packages (BSPs) for NXP SoCs,
- a fully operational tool chain, kernel and board specific modules.
-
- SDK and related information can be obtained from: `NXP QorIQ SDK <http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX>`_.
-
-- **DPDK Extra Scripts**
-
- DPAA2 based resources can be configured easily with the help of ready scripts
- as provided in the DPDK Extra repository.
-
- `DPDK Extras Scripts <https://github.com/qoriq-open-source/dpdk-extras>`_.
+See :doc:`../platform/dpaa2` for setup information
Currently supported by DPDK:
-- NXP SDK **2.0+**.
-- MC Firmware version **10.0.0** and higher.
+- NXP SDK **18.09+**.
+- MC Firmware version **10.10.0** and higher.
- Supported architectures: **arm64 LE**.
- Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup the basic DPDK environment.
@@ -25,6 +25,7 @@ The DPAA2 QDMA implements following features in the rawdev API;
Supported DPAA2 SoCs
--------------------
+- LX2160A
- LS2084A/LS2044A
- LS2088A/LS2048A
- LS1088A/LS1048A
@@ -32,52 +33,12 @@ Supported DPAA2 SoCs
Prerequisites
-------------
-There are three main pre-requisities for executing DPAA2 QDMA on a DPAA2
-compatible board:
-
-1. **ARM 64 Tool Chain**
-
- For example, the `*aarch64* Linaro Toolchain <https://releases.linaro.org/components/toolchain/binaries/6.3-2017.02/aarch64-linux-gnu>`_.
-
-2. **Linux Kernel**
-
- It can be obtained from `NXP's Github hosting <https://github.com/qoriq-open-source/linux>`_.
-
-3. **Rootfile system**
-
- Any *aarch64* supporting filesystem can be used. For example,
- Ubuntu 15.10 (Wily) or 16.04 LTS (Xenial) userland which can be obtained
- from `here <http://cdimage.ubuntu.com/ubuntu-base/releases/16.04/release/ubuntu-base-16.04.1-base-arm64.tar.gz>`_.
-
-As an alternative method, DPAA2 QDMA can also be executed using images provided
-as part of SDK from NXP. The SDK includes all the above prerequisites necessary
-to bring up a DPAA2 board.
-
-The following dependencies are not part of DPDK and must be installed
-separately:
-
-- **NXP Linux SDK**
-
- NXP Linux software development kit (SDK) includes support for family
- of QorIQ® ARM-Architecture-based system on chip (SoC) processors
- and corresponding boards.
-
- It includes the Linux board support packages (BSPs) for NXP SoCs,
- a fully operational tool chain, kernel and board specific modules.
-
- SDK and related information can be obtained from: `NXP QorIQ SDK <http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX>`_.
-
-- **DPDK Extra Scripts**
-
- DPAA2 based resources can be configured easily with the help of ready scripts
- as provided in the DPDK Extra repository.
-
- `DPDK Extras Scripts <https://github.com/qoriq-open-source/dpdk-extras>`_.
+See :doc:`../platform/dpaa2` for setup information
Currently supported by DPDK:
-- NXP LSDK **17.12+**.
-- MC Firmware version **10.3.0** and higher.
+- NXP SDK **18.09+**.
+- MC Firmware version **10.10.0** and higher.
- Supported architectures: **arm64 LE**.
- Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup the basic DPDK environment.