[v5,1/1] rtc: pl031: convert the driver to driver model

Message ID 20180926164949.6504-1-xypron.glpk@gmx.de
State New
Headers show
Series
  • [v5,1/1] rtc: pl031: convert the driver to driver model
Related show

Commit Message

Heinrich Schuchardt Sept. 26, 2018, 4:49 p.m.
From: AKASHI Takahiro <takahiro.akashi@linaro.org>

With this patch, PL031 driver is converted to driver-model-compliant
driver. In addition, CONFIG_SYS_RTC_PL031_BASE is no longer valid.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Rebased on U-Boot master
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
---
v5
	rebased on U-Boot master

@Alex:
Currently efi-next cannot be rebased on U-Boot master. Please, update the
patch with this new version.
---
 drivers/rtc/pl031.c          | 126 ++++++++++++++++++++++-------------
 include/configs/qemu-arm.h   |   3 -
 scripts/config_whitelist.txt |   1 -
 3 files changed, 80 insertions(+), 50 deletions(-)

Comments

Alexander Graf Sept. 26, 2018, 9:15 p.m. | #1
On 26.09.18 18:49, Heinrich Schuchardt wrote:
> From: AKASHI Takahiro <takahiro.akashi@linaro.org>
> 
> With this patch, PL031 driver is converted to driver-model-compliant
> driver. In addition, CONFIG_SYS_RTC_PL031_BASE is no longer valid.
> 
> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
> Signed-off-by: Alexander Graf <agraf@suse.de>
> Rebased on U-Boot master
> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

I'm sure Tom can just fix this up on the merge :)


Alex

Patch

diff --git a/drivers/rtc/pl031.c b/drivers/rtc/pl031.c
index 8955805e3b..8bf04f26a3 100644
--- a/drivers/rtc/pl031.c
+++ b/drivers/rtc/pl031.c
@@ -8,13 +8,11 @@ 
 
 #include <common.h>
 #include <command.h>
+#include <dm.h>
+#include <errno.h>
 #include <rtc.h>
-
-#if defined(CONFIG_CMD_DATE)
-
-#ifndef CONFIG_SYS_RTC_PL031_BASE
-#error CONFIG_SYS_RTC_PL031_BASE is not defined!
-#endif
+#include <asm/io.h>
+#include <asm/types.h>
 
 /*
  * Register definitions
@@ -30,78 +28,114 @@ 
 
 #define RTC_CR_START	(1 << 0)
 
-#define	RTC_WRITE_REG(addr, val) \
-			(*(volatile unsigned int *)(CONFIG_SYS_RTC_PL031_BASE + (addr)) = (val))
-#define	RTC_READ_REG(addr)	\
-			(*(volatile unsigned int *)(CONFIG_SYS_RTC_PL031_BASE + (addr)))
+struct pl031_platdata {
+	phys_addr_t base;
+};
 
-static int pl031_initted = 0;
+static inline u32 pl031_read_reg(struct udevice *dev, int reg)
+{
+	struct pl031_platdata *pdata = dev_get_platdata(dev);
 
-/* Enable RTC Start in Control register*/
-void rtc_init(void)
+	return readl(pdata->base + reg);
+}
+
+static inline u32 pl031_write_reg(struct udevice *dev, int reg, u32 value)
 {
-	RTC_WRITE_REG(RTC_CR, RTC_CR_START);
+	struct pl031_platdata *pdata = dev_get_platdata(dev);
 
-	pl031_initted = 1;
+	return writel(value, pdata->base + reg);
 }
 
 /*
- * Reset the RTC. We set the date back to 1970-01-01.
+ * Probe RTC device
+ */
+static int pl031_probe(struct udevice *dev)
+{
+	/* Enable RTC Start in Control register*/
+	pl031_write_reg(dev, RTC_CR, RTC_CR_START);
+
+	return 0;
+}
+
+/*
+ * Get the current time from the RTC
  */
-void rtc_reset(void)
+static int pl031_get(struct udevice *dev, struct rtc_time *tm)
 {
-	RTC_WRITE_REG(RTC_LR, 0x00);
-	if(!pl031_initted)
-		rtc_init();
+	unsigned long tim;
+
+	if (!tm)
+		return -EINVAL;
+
+	tim = pl031_read_reg(dev, RTC_DR);
+
+	rtc_to_tm(tim, tm);
+
+	debug("Get DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
+	      tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_wday,
+	      tm->tm_hour, tm->tm_min, tm->tm_sec);
+
+	return 0;
 }
 
 /*
  * Set the RTC
-*/
-int rtc_set(struct rtc_time *tmp)
+ */
+static int pl031_set(struct udevice *dev, const struct rtc_time *tm)
 {
 	unsigned long tim;
 
-	if(!pl031_initted)
-		rtc_init();
+	if (!tm)
+		return -EINVAL;
 
-	if (tmp == NULL) {
-		puts("Error setting the date/time\n");
-		return -1;
-	}
+	debug("Set DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
+	      tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_wday,
+	      tm->tm_hour, tm->tm_min, tm->tm_sec);
 
 	/* Calculate number of seconds this incoming time represents */
-	tim = rtc_mktime(tmp);
+	tim = rtc_mktime(tm);
 
-	RTC_WRITE_REG(RTC_LR, tim);
+	pl031_write_reg(dev, RTC_LR, tim);
 
-	return -1;
+	return 0;
 }
 
 /*
- * Get the current time from the RTC
+ * Reset the RTC. We set the date back to 1970-01-01.
  */
-int rtc_get(struct rtc_time *tmp)
+static int pl031_reset(struct udevice *dev)
 {
-	ulong tim;
+	pl031_write_reg(dev, RTC_LR, 0);
 
-	if(!pl031_initted)
-		rtc_init();
+	return 0;
+}
 
-	if (tmp == NULL) {
-		puts("Error getting the date/time\n");
-		return -1;
-	}
+static const struct rtc_ops pl031_ops = {
+	.get = pl031_get,
+	.set = pl031_set,
+	.reset = pl031_reset,
+};
 
-	tim = RTC_READ_REG(RTC_DR);
+static const struct udevice_id pl031_ids[] = {
+	{ .compatible = "arm,pl031" },
+	{ }
+};
 
-	rtc_to_tm(tim, tmp);
+static int pl031_ofdata_to_platdata(struct udevice *dev)
+{
+	struct pl031_platdata *pdata = dev_get_platdata(dev);
 
-	debug ( "Get DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
-		tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
-		tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+	pdata->base = dev_read_addr(dev);
 
 	return 0;
 }
 
-#endif
+U_BOOT_DRIVER(rtc_pl031) = {
+	.name	= "rtc-pl031",
+	.id	= UCLASS_RTC,
+	.of_match = pl031_ids,
+	.probe	= pl031_probe,
+	.ofdata_to_platdata = pl031_ofdata_to_platdata,
+	.platdata_auto_alloc_size = sizeof(struct pl031_platdata),
+	.ops	= &pl031_ops,
+};
diff --git a/include/configs/qemu-arm.h b/include/configs/qemu-arm.h
index 5a12a32d39..fedc4662fa 100644
--- a/include/configs/qemu-arm.h
+++ b/include/configs/qemu-arm.h
@@ -20,9 +20,6 @@ 
 /* For timer, QEMU emulates an ARMv7/ARMv8 architected timer */
 #define CONFIG_SYS_HZ                       1000
 
-/* QEMU emulates the ARM AMBA PL031 RTC */
-#define CONFIG_SYS_RTC_PL031_BASE	0x09010000
-
 /* Environment options */
 #define CONFIG_ENV_SIZE				SZ_64K
 
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 81ba55034d..03e4d28b76 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -4069,7 +4069,6 @@  CONFIG_SYS_RSTC_RMR_VAL
 CONFIG_SYS_RTC_BUS_NUM
 CONFIG_SYS_RTC_CNT
 CONFIG_SYS_RTC_OSCILLATOR
-CONFIG_SYS_RTC_PL031_BASE
 CONFIG_SYS_RTC_REG_BASE_ADDR
 CONFIG_SYS_RTC_SETUP
 CONFIG_SYS_RV3029_TCR