diff mbox series

[RFC,v2,9/9] leds: lm3632: Introduce the TI LM3632 driver

Message ID 20180928182954.25446-10-dmurphy@ti.com
State New
Headers show
Series None | expand

Commit Message

Dan Murphy Sept. 28, 2018, 6:29 p.m. UTC
Add the dedicated TI LM3632 LED driver.  This
LED device is capable of driving a backlight display.

In addition to the backlight the device has control
of a strobe and torch output.

Data sheet:
http://www.ti.com/lit/ds/symlink/lm3632a.pdf

Signed-off-by: Dan Murphy <dmurphy@ti.com>

---
 drivers/leds/Kconfig       |  10 +-
 drivers/leds/Makefile      |   1 +
 drivers/leds/leds-lm3632.c | 646 +++++++++++++++++++++++++++++++++++++
 3 files changed, 656 insertions(+), 1 deletion(-)
 create mode 100644 drivers/leds/leds-lm3632.c

-- 
2.19.0
diff mbox series

Patch

diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 1a78588d9806..6174ab806cfb 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -764,8 +764,16 @@  config LEDS_LM3697
           This supports the LED device LM3697.
 
 config LEDS_LM3633
-	tristate "LED driver for LM3633"
+	tristate "LED driver for LM3632"
  	depends on LEDS_TI_LMU_COMMON
+	help
+          Say Y to enable the LED driver for TI LMU devices.
+          This supports the LED device LM3632.
+
+config LEDS_LM3632
+	tristate "LED driver for LM3632"
+	depends on LEDS_TI_LMU_COMMON
+	depends on LEDS_CLASS_FLASH
 	help
           Say Y to enable the LED driver for TI LMU devices.
           This supports the LED device LM3633.
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 6ec006892fc0..53d02d7f1a0b 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -79,6 +79,7 @@  obj-$(CONFIG_LEDS_LM3692X)		+= leds-lm3692x.o
 obj-$(CONFIG_LEDS_SC27XX_BLTC)		+= leds-sc27xx-bltc.o
 obj-$(CONFIG_LEDS_LM3601X)		+= leds-lm3601x.o
 obj-$(CONFIG_LEDS_LM3697)		+= leds-lm3697.o
+obj-$(CONFIG_LEDS_LM3632)		+= leds-lm3632.o
 obj-$(CONFIG_LEDS_LM3633)		+= leds-lm3633.o
 obj-$(CONFIG_LEDS_TI_LMU_COMMON)	+= ti-lmu-led-common.o
 
diff --git a/drivers/leds/leds-lm3632.c b/drivers/leds/leds-lm3632.c
new file mode 100644
index 000000000000..ac3c21180444
--- /dev/null
+++ b/drivers/leds/leds-lm3632.c
@@ -0,0 +1,646 @@ 
+// SPDX-License-Identifier: GPL-2.0
+// Flash and torch driver for Texas Instruments LM3632 LED
+// Flash driver chip family
+// Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+
+#include <linux/led-class-flash.h>
+
+#include "ti-lmu-led-common.h"
+
+#define LM3632_MODE_BL		0x0
+#define LM3632_MODE_TORCH	0x1
+
+/* Registers */
+#define LM3632_REV_REG		0x01
+#define LM3632_CFG1_REG		0x02
+#define LM3632_CFG2_REG		0x03
+#define LM3633_BL_BRT_LSB	0x04
+#define LM3633_BL_BRT_MSB	0x05
+#define LM3632_FLASH_TORCH_BRT	0x06
+#define LM3632_FLASH_CFG	0x07
+#define LM3632_IO_CTRL		0x09
+#define LM3632_ENABLE_REG	0x0a
+#define LM3632_FLAGS1_REG	0x0b
+#define LM3632_FLAGS2_REG	0x10
+
+/* Enable Mode bits */
+#define LM3632_BL_EN		BIT(0)
+#define LM3632_FLASH_OUT_EN	BIT(1)
+#define LM3632_FLASH_MODE	BIT(2)
+#define LM3632_BLED1_2_EN	BIT(3)
+#define LM3632_BLED1_EN		BIT(4)
+#define LM3632_BLED1_2_MASK	(LM3632_BL_EN | LM3632_BLED1_2_EN | LM3632_BLED1_EN)
+#define LM3632_BL_OVP_EN	BIT(6)
+#define LM3632_SW_RESET		BIT(7)
+
+/* Flags 1 Mask */
+#define LM3632_THERM_SHUTDOWN	BIT(0)
+#define LM3632_FLASH_TIME_OUT	BIT(1)
+#define LM3632_FLED_SHORT_FAULT	BIT(2)
+#define LM3632_VINM_SHORT_FAULT	BIT(4)
+#define LM3632_FOUT_SHORT_FAULT	BIT(5)
+#define LM3632_FLASH_OVP_FAULT	BIT(6)
+#define LM3632_BL_OVP_FAULT	BIT(7)
+
+/* Flags 2 Mask */
+#define LM3632_BL_OCP_FAULT	BIT(0)
+#define LM3632_FLASH_OCP_FAULT	BIT(1)
+#define LM3632_VNEG_SHORT_FAULT	BIT(2)
+#define LM3632_VPOS_SHORT_FAULT	BIT(3)
+#define LM3632_VNEG_OVP_FAULT	BIT(4)
+#define LM3632_LCM_OVP_FAULT	BIT(5)
+
+/* IO CTRL bits */
+#define LM3632_VINM_EN		BIT(0)
+#define LM3632_VINM_MODE_EN	BIT(1)
+#define LM3632_TX_EN		BIT(2)
+#define LM3632_HW_STROBE_EN	BIT(4)
+#define LM3632_PWM_EN		BIT(6)
+
+#define LM3632_TORCH_BRT_SHIFT	4
+
+#define LM3632_MAX_TORCH_I_UA	375000
+#define LM3632_MIN_TORCH_I_UA	25000
+#define LM3632_TORCH_STEP_UA	25000
+
+#define LM3632_MAX_STROBE_I_UA	1500000
+#define LM3632_MIN_STROBE_I_UA	100000
+#define LM3632_STROBE_STEP_UA	100000
+
+#define LM3632_TIMEOUT_MASK	0x1f
+#define LM3632_ENABLE_MASK	(LM3632_BL_EN | LM3632_FLASH_OUT_EN)
+
+#define LM3632_TIMEOUT_STEP_US	32000
+#define LM3632_MIN_TIMEOUT_US	32000
+#define LM3632_MAX_TIMEOUT_US	1024000
+
+#define LM3632_TORCH_BRT_MASK	0xf0
+#define LM3632_FLASH_BRT_MASK	0xf
+
+#define LM3632_NUM_OF_BL_STRINGS 2
+#define LM3632_BL_ENABLED	1
+#define LM3632_BL1_ENABLE_SRC	0
+#define LM3632_BL12_ENABLE_SRC	1
+
+/**
+ * struct lm3632_led -
+ * @fled_cdev: flash LED class device pointer
+ * @led_name: LED label
+ * @led_dev: LED class device
+ * @priv: Pointer to the lm3632 struct
+ * @lmu_data: Register and setting values for common code
+ * @led_name: LED label for the Torch or IR LED
+ * @flash_timeout: the timeout for the flash
+ * @last_flag: last known flags register value
+ * @torch_current_max: maximum current for the torch
+ * @flash_current_max: maximum current for the flash
+ * @max_flash_timeout: maximum timeout for the flash
+ */
+struct lm3632_led {
+	struct led_classdev_flash fled_cdev;
+	u32 led_strings[LM3632_NUM_OF_BL_STRINGS];
+	char led_name[LED_MAX_NAME_SIZE];
+	struct led_classdev led_dev;
+	struct ti_lmu_bank lmu_data;
+	struct lm3632 *priv;
+
+	unsigned int flash_timeout;
+	unsigned int last_flag;
+
+	u32 torch_current_max;
+	u32 flash_current_max;
+	u32 max_flash_timeout;
+};
+
+/**
+ * struct lm3632 -
+ * @client: Pointer to the I2C client
+ * @regmap: Devices register map
+ * @lock: Lock for reading/writing the device
+ * @strobe_enable_gpio: Indicates whether strobe is HW controlled
+ * @leds: Array of LED strings
+ */
+struct lm3632 {
+	struct i2c_client *client;
+	struct regmap *regmap;
+	struct device *dev;
+	struct mutex lock;
+	int strobe_enable_gpio;
+
+	struct lm3632_led leds[];
+};
+
+static const struct reg_default lm3632_regmap_defs[] = {
+	{ LM3632_CFG1_REG, 0x30 },
+	{ LM3632_CFG2_REG, 0x0d },
+	{ LM3632_FLASH_CFG, 0x2f },
+	{ LM3632_ENABLE_REG, 0x00 },
+};
+
+static bool lm3632_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case LM3632_FLAGS1_REG:
+	case LM3632_FLAGS2_REG:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct regmap_config lm3632_regmap = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = LM3632_FLAGS2_REG,
+	.reg_defaults = lm3632_regmap_defs,
+	.num_reg_defaults = ARRAY_SIZE(lm3632_regmap_defs),
+	.cache_type = REGCACHE_RBTREE,
+	.volatile_reg = lm3632_volatile_reg,
+};
+
+static struct lm3632_led *fled_cdev_to_led(struct led_classdev_flash *fled_cdev)
+{
+	return container_of(fled_cdev, struct lm3632_led, fled_cdev);
+}
+
+static int lm3632_read_faults(struct lm3632_led *led)
+{
+	struct lm3632 *priv = led->priv;
+	int flags_val;
+	int ret;
+
+	ret = regmap_read(priv->regmap, LM3632_FLAGS1_REG, &flags_val);
+	if (ret < 0)
+		return -EIO;
+
+	led->last_flag = 0;
+
+	if (flags_val & LM3632_FLASH_OVP_FAULT)
+		led->last_flag |= LED_FAULT_OVER_VOLTAGE;
+
+	if (flags_val & LM3632_THERM_SHUTDOWN)
+		led->last_flag |= LED_FAULT_OVER_TEMPERATURE;
+
+	if (flags_val & (LM3632_FLED_SHORT_FAULT | LM3632_VINM_SHORT_FAULT |
+	    LM3632_FOUT_SHORT_FAULT))
+		led->last_flag |= LED_FAULT_SHORT_CIRCUIT;
+
+	if (flags_val & LM3632_THERM_SHUTDOWN)
+		led->last_flag |= LED_FAULT_LED_OVER_TEMPERATURE;
+
+	if (flags_val & LM3632_FLASH_TIME_OUT)
+		led->last_flag |= LED_FAULT_TIMEOUT;
+
+	ret = regmap_read(priv->regmap, LM3632_FLAGS2_REG, &flags_val);
+	if (ret < 0)
+		return -EIO;
+
+	if (flags_val & (LM3632_BL_OCP_FAULT | LM3632_FLASH_OCP_FAULT))
+		led->last_flag |= LED_FAULT_OVER_CURRENT;
+
+	if (flags_val & LM3632_FLASH_OCP_FAULT)
+		led->last_flag |= LED_FAULT_OVER_CURRENT;
+
+	return led->last_flag;
+}
+
+static int lm3632_backlight_brightness_set(struct led_classdev *cdev,
+					enum led_brightness brightness)
+{
+	struct lm3632_led *led = container_of(cdev, struct lm3632_led, led_dev);
+	struct lm3632 *priv = led->priv;
+	int ret;
+
+	mutex_lock(&priv->lock);
+
+	ret = ti_lmu_common_set_brightness(&led->lmu_data, brightness);
+	if (ret)
+		dev_err(&priv->client->dev, "Cannot write brightness\n");
+
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static int lm3632_torch_brightness_set(struct led_classdev *cdev,
+					enum led_brightness brightness)
+{
+	struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(cdev);
+	struct lm3632_led *led = fled_cdev_to_led(fled_cdev);
+	struct lm3632 *priv = led->priv;
+	int ret, brightness_val;
+	unsigned int reg_val;
+
+	mutex_lock(&priv->lock);
+
+	ret = lm3632_read_faults(led);
+	if (ret < 0)
+		goto out;
+
+	if (brightness == LED_OFF)
+		ret = regmap_update_bits(priv->regmap, LM3632_ENABLE_REG,
+					 LM3632_FLASH_OUT_EN,
+					 ~LM3632_FLASH_OUT_EN);
+	else {
+		regmap_read(priv->regmap, LM3632_FLASH_TORCH_BRT, &reg_val);
+		brightness_val = (brightness - LM3632_TORCH_STEP_UA) / LM3632_TORCH_STEP_UA;
+		brightness_val |= (reg_val & LM3632_FLASH_BRT_MASK);
+
+		ret = regmap_write(priv->regmap, LM3632_FLASH_TORCH_BRT,
+				   brightness_val << LM3632_TORCH_BRT_SHIFT);
+		if (ret) {
+			dev_err(&priv->client->dev, "Cannot write brightness\n");
+			goto out;
+		}
+
+		ret = regmap_update_bits(priv->regmap, LM3632_ENABLE_REG,
+					 LM3632_FLASH_MODE | LM3632_FLASH_OUT_EN,
+					 LM3632_FLASH_OUT_EN | ~LM3632_FLASH_MODE);
+		if (ret)
+			dev_err(&priv->client->dev, "Cannot write enable\n");
+	}
+out:
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static int lm3632_strobe_set(struct led_classdev_flash *fled_cdev, bool state)
+{
+	struct lm3632_led *led = fled_cdev_to_led(fled_cdev);
+	struct lm3632 *priv = led->priv;
+	int timeout_reg_val;
+	int current_timeout;
+	int ret;
+
+	mutex_lock(&priv->lock);
+
+	ret = regmap_read(priv->regmap, LM3632_FLASH_CFG, &current_timeout);
+	if (ret < 0)
+		goto out;
+
+	if (led->flash_timeout != current_timeout) {
+		timeout_reg_val = (led->flash_timeout - LM3632_TIMEOUT_STEP_US) / LM3632_TIMEOUT_STEP_US;
+		ret = regmap_update_bits(priv->regmap, LM3632_FLASH_CFG,
+					LM3632_TIMEOUT_MASK, timeout_reg_val);
+		if (ret) {
+			dev_err(&priv->client->dev, "Cannot write timeout\n");
+			goto out;
+		}
+	}
+
+	if (state && !priv->strobe_enable_gpio) {
+		ret = regmap_update_bits(priv->regmap, LM3632_ENABLE_REG,
+					 LM3632_FLASH_MODE | LM3632_FLASH_OUT_EN,
+					 LM3632_FLASH_OUT_EN | LM3632_FLASH_MODE);
+		if (ret) {
+			dev_err(&priv->client->dev, "Cannot write flash en\n");
+			goto out;
+		}
+	}
+
+	ret = lm3632_read_faults(led);
+out:
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static int lm3632_flash_brightness_set(struct led_classdev_flash *fled_cdev,
+					u32 brightness)
+{
+	struct lm3632_led *led = fled_cdev_to_led(fled_cdev);
+	struct lm3632 *priv = led->priv;
+	u32 brightness_val;
+	int ret;
+	unsigned int reg_val;
+
+	mutex_lock(&priv->lock);
+	ret = lm3632_read_faults(led);
+	if (ret < 0)
+		goto out;
+
+	brightness_val = (brightness - LM3632_STROBE_STEP_UA) / LM3632_STROBE_STEP_UA;
+	regmap_read(priv->regmap, LM3632_FLASH_TORCH_BRT, &reg_val);
+
+	brightness_val |= (reg_val & LM3632_TORCH_BRT_MASK);
+	ret = regmap_write(priv->regmap, LM3632_FLASH_TORCH_BRT, brightness_val);
+	if (ret)
+		dev_err(&priv->client->dev, "Cannot write brightness\n");
+
+out:
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static int lm3632_flash_timeout_set(struct led_classdev_flash *fled_cdev,
+				u32 timeout)
+{
+	struct lm3632_led *led = fled_cdev_to_led(fled_cdev);
+	struct lm3632 *priv = led->priv;
+
+	mutex_lock(&priv->lock);
+
+	led->flash_timeout = timeout;
+
+	mutex_unlock(&priv->lock);
+
+	return 0;
+}
+
+static int lm3632_strobe_get(struct led_classdev_flash *fled_cdev, bool *state)
+{
+	struct lm3632_led *led = fled_cdev_to_led(fled_cdev);
+	struct lm3632 *priv = led->priv;
+	int strobe_state;
+	int ret;
+
+	mutex_lock(&priv->lock);
+
+	ret = regmap_read(priv->regmap, LM3632_ENABLE_REG, &strobe_state);
+	if (ret < 0)
+		goto out;
+
+	*state = strobe_state & LM3632_FLASH_OUT_EN;
+
+out:
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static int lm3632_flash_fault_get(struct led_classdev_flash *fled_cdev,
+				u32 *fault)
+{
+	struct lm3632_led *led = fled_cdev_to_led(fled_cdev);
+
+	lm3632_read_faults(led);
+
+	*fault = led->last_flag;
+
+	return 0;
+}
+
+static const struct led_flash_ops flash_ops = {
+	.flash_brightness_set	= lm3632_flash_brightness_set,
+	.strobe_set		= lm3632_strobe_set,
+	.strobe_get		= lm3632_strobe_get,
+	.timeout_set		= lm3632_flash_timeout_set,
+	.fault_get		= lm3632_flash_fault_get,
+};
+
+static int lm3632_register_strobe_leds(struct lm3632_led *led)
+{
+	struct led_classdev *led_cdev;
+	struct led_flash_setting *setting;
+
+	led->fled_cdev.ops = &flash_ops;
+
+	setting = &led->fled_cdev.timeout;
+	setting->min = LM3632_MIN_TIMEOUT_US;
+	setting->max = led->max_flash_timeout;
+	setting->step = LM3632_TIMEOUT_STEP_US;
+	setting->val = led->max_flash_timeout;
+
+	setting = &led->fled_cdev.brightness;
+	setting->min = LM3632_MIN_STROBE_I_UA;
+	setting->max = led->flash_current_max;
+	setting->step = LM3632_STROBE_STEP_UA;
+	setting->val = led->flash_current_max;
+
+	led_cdev = &led->fled_cdev.led_cdev;
+	led_cdev->name = led->led_name;
+	led_cdev->brightness_set_blocking = lm3632_torch_brightness_set;
+	led_cdev->max_brightness = led->torch_current_max;
+
+	led_cdev->flags |= LED_DEV_CAP_FLASH;
+
+	return led_classdev_flash_register(&led->priv->client->dev, &led->fled_cdev);
+}
+
+static int lm3632_strobe_init(struct lm3632_led *led)
+{
+	struct lm3632 *priv = led->priv;
+
+	if (priv->strobe_enable_gpio)
+		regmap_update_bits(priv->regmap, LM3632_IO_CTRL,
+				   LM3632_HW_STROBE_EN, LM3632_HW_STROBE_EN);
+
+	return regmap_update_bits(priv->regmap, LM3632_ENABLE_REG,
+				  LM3632_FLASH_OUT_EN, ~LM3632_FLASH_OUT_EN);
+
+}
+
+static int lm3632_backlight_init(struct lm3632_led *led)
+{
+	struct lm3632 *priv = led->priv;
+	u8 bl_enable = 0;
+	int ret;
+
+	if (led->led_strings[LM3632_BL12_ENABLE_SRC] == LM3632_BL_ENABLED)
+		bl_enable |= LM3632_BLED1_2_EN;
+	else if (led->led_strings[LM3632_BL1_ENABLE_SRC] == LM3632_BL_ENABLED)
+		bl_enable |= LM3632_BLED1_EN;
+	else
+		return -EINVAL;
+
+	bl_enable |= LM3632_BL_EN;
+
+	/* Power up default is on so lets set it to off */
+	ret = ti_lmu_common_set_brightness(&led->lmu_data, LED_OFF);
+	if (ret) {
+		dev_err(&priv->client->dev, "Cannot write brightness\n");
+		return ret;
+	}
+
+	return regmap_update_bits(priv->regmap, LM3632_ENABLE_REG,
+				  LM3632_BLED1_2_MASK, bl_enable);
+}
+
+static int lm3632_parse_node(struct lm3632 *priv)
+{
+	struct fwnode_handle *child = NULL;
+	struct lm3632_led *led;
+	int ret = -ENODEV;
+	const char *name;
+	u32 led_mode;
+	size_t i = 0;
+
+	priv->strobe_enable_gpio = device_property_present(&priv->client->dev,
+						   "hw-strobe");
+
+	device_for_each_child_node(priv->dev, child) {
+		ret = fwnode_property_read_u32(child, "reg", &led_mode);
+		if (ret) {
+			dev_err(&priv->client->dev, "reg DT property missing\n");
+			goto out_err;
+		}
+
+		if (led_mode > LM3632_MODE_TORCH ||
+		    led_mode < LM3632_MODE_BL) {
+			dev_warn(&priv->client->dev, "Invalid led mode requested\n");
+			ret = -EINVAL;
+			goto out_err;
+		}
+
+		led = &priv->leds[i];
+		led->priv = priv;
+
+		ret = fwnode_property_read_string(child, "label", &name);
+		if (ret) {
+			if (led_mode == LM3632_MODE_TORCH)
+				name = "torch";
+			else
+				name = "backlight";
+		}
+
+		snprintf(led->led_name, sizeof(led->led_name),
+			"%s:%s", priv->client->name, name);
+
+		if (led_mode == LM3632_MODE_TORCH) {
+			ret = fwnode_property_read_u32(child, "led-max-microamp",
+							&led->torch_current_max);
+			if (ret) {
+				dev_warn(&priv->client->dev,
+					"led-max-microamp DT property missing\n");
+				goto out_err;
+			}
+
+			ret = fwnode_property_read_u32(child, "flash-max-microamp",
+						&led->flash_current_max);
+			if (ret) {
+				dev_warn(&priv->client->dev,
+					 "flash-max-microamp DT property missing\n");
+				goto out_err;
+			}
+
+			ret = fwnode_property_read_u32(child, "flash-max-timeout-us",
+						&led->max_flash_timeout);
+			if (ret) {
+				dev_warn(&priv->client->dev,
+					 "flash-max-timeout-us DT property missing\n");
+				goto out_err;
+			}
+			ret = lm3632_strobe_init(led);
+			if (ret) {
+				dev_err(&priv->client->dev, "failed to init strobe\n");
+				continue;
+			}
+
+			ret = lm3632_register_strobe_leds(led);
+			if (ret) {
+				dev_warn(&priv->client->dev,
+					 "Failed to register flash LEDs\n");
+				goto out_err;
+			}
+
+		} else	if (led_mode == LM3632_MODE_BL) {
+
+			ret = fwnode_property_read_u32_array(child, "led-sources",
+							     led->led_strings,
+							     LM3632_NUM_OF_BL_STRINGS);
+			if (ret) {
+				dev_err(&priv->client->dev, "led-sources property missing\n");
+				continue;
+			}
+
+			led->led_dev.name = led->led_name;
+			led->led_dev.brightness_set_blocking = lm3632_backlight_brightness_set;
+			led->lmu_data.regmap = priv->regmap;
+			led->lmu_data.max_brightness = MAX_BRIGHTNESS_11BIT;
+			led->lmu_data.lsb_brightness_reg = LM3633_BL_BRT_LSB;
+			led->lmu_data.msb_brightness_reg = LM3633_BL_BRT_MSB;
+			led->lmu_data.enable_reg = LM3632_ENABLE_REG;
+
+			ret = lm3632_backlight_init(led);
+			if (ret) {
+				dev_err(&priv->client->dev, "failed to init backlight\n");
+				continue;
+			}
+
+			ret = devm_led_classdev_register(priv->dev, &led->led_dev);
+			if (ret) {
+				dev_err(&priv->client->dev, "failed to register backlight\n");
+				continue;
+			}
+		} else {
+			dev_warn(&priv->client->dev,
+					 "Failed to register flash LEDs\n");
+			goto out_err;
+		}
+
+		i++;
+	}
+out_err:
+	fwnode_handle_put(child);
+	return ret;
+}
+
+static int lm3632_probe(struct i2c_client *client)
+{
+	struct lm3632 *led;
+	int count;
+	int ret;
+
+	count = device_get_child_node_count(&client->dev);
+	if (!count) {
+		dev_err(&client->dev, "LEDs are not defined in device tree!");
+		return -ENODEV;
+	}
+
+	led = devm_kzalloc(&client->dev, struct_size(led, leds, count),
+			   GFP_KERNEL);
+	if (!led)
+		return -ENOMEM;
+
+	led->client = client;
+	led->dev = &client->dev;
+	i2c_set_clientdata(client, led);
+
+	led->regmap = devm_regmap_init_i2c(client, &lm3632_regmap);
+	if (IS_ERR(led->regmap)) {
+		ret = PTR_ERR(led->regmap);
+		dev_err(&client->dev,
+			"Failed to allocate register map: %d\n", ret);
+		return ret;
+	}
+
+	mutex_init(&led->lock);
+
+	return lm3632_parse_node(led);
+}
+
+static int lm3632_remove(struct i2c_client *client)
+{
+	struct lm3632 *led = i2c_get_clientdata(client);
+
+/*	led_classdev_flash_unregister(&led->fled_cdev);*/
+	mutex_destroy(&led->lock);
+
+	return regmap_update_bits(led->regmap, LM3632_ENABLE_REG,
+			   LM3632_ENABLE_MASK, 0x00);
+}
+
+static const struct i2c_device_id lm3632_id[] = {
+	{ "LM3632", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, lm3632_id);
+
+static const struct of_device_id of_lm3632_leds_match[] = {
+	{ .compatible = "ti,lm3632", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, of_lm3632_leds_match);
+
+static struct i2c_driver lm3632_i2c_driver = {
+	.driver = {
+		.name = "lm3632",
+		.of_match_table = of_lm3632_leds_match,
+	},
+	.probe_new = lm3632_probe,
+	.remove = lm3632_remove,
+	.id_table = lm3632_id,
+};
+module_i2c_driver(lm3632_i2c_driver);
+
+MODULE_DESCRIPTION("Texas Instruments Flash Lighting driver for LM3632");
+MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
+MODULE_LICENSE("GPL v2");