diff mbox series

[2/4] ARM: dts: uniphier: Add USB2 phy nodes

Message ID 1538478722-20351-3-git-send-email-hayashi.kunihiko@socionext.com
State New
Headers show
Series Add UniPhier USB3 controller and USB2 phy nodes | expand

Commit Message

Kunihiko Hayashi Oct. 2, 2018, 11:12 a.m. UTC 
Add nodes of USB2 physical layer for UniPhier SoC. This supports Pro4.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>

---
 arch/arm/boot/dts/uniphier-pro4.dtsi | 35 ++++++++++++++++++++++++++++++++++-
 1 file changed, 34 insertions(+), 1 deletion(-)

-- 
2.7.4
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/uniphier-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi
index b994494..4b2e291 100644
--- a/arch/arm/boot/dts/uniphier-pro4.dtsi
+++ b/arch/arm/boot/dts/uniphier-pro4.dtsi
@@ -269,6 +269,8 @@ 
 				 <&mio_clk 12>;
 			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
 				 <&mio_rst 12>;
+			phy-names = "usb";
+			phys = <&usb_phy0>;
 			has-transaction-translator;
 		};
 
@@ -283,6 +285,8 @@ 
 				 <&mio_clk 13>;
 			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
 				 <&mio_rst 13>;
+			phy-names = "usb";
+			phys = <&usb_phy1>;
 			has-transaction-translator;
 		};
 
@@ -294,6 +298,34 @@ 
 			pinctrl: pinctrl {
 				compatible = "socionext,uniphier-pro4-pinctrl";
 			};
+
+			usb-phy {
+				compatible = "socionext,uniphier-pro4-usb2-phy";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				usb_phy0: phy@0 {
+					reg = <0>;
+					#phy-cells = <0>;
+				};
+
+				usb_phy1: phy@1 {
+					reg = <1>;
+					#phy-cells = <0>;
+				};
+
+				usb_phy2: phy@2 {
+					reg = <2>;
+					#phy-cells = <0>;
+					vbus-supply = <&usb0_vbus>;
+				};
+
+				usb_phy3: phy@3 {
+					reg = <3>;
+					#phy-cells = <0>;
+					vbus-supply = <&usb1_vbus>;
+				};
+			};
 		};
 
 		soc-glue@5f900000 {
@@ -397,7 +429,7 @@ 
 			clock-names = "ref", "bus_early", "suspend";
 			clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
 			resets = <&usb0_rst 4>;
-			phys = <&usb0_ssphy>;
+			phys = <&usb_phy2>, <&usb0_ssphy>;
 			dr_mode = "host";
 		};
 
@@ -450,6 +482,7 @@ 
 			clock-names = "ref", "bus_early", "suspend";
 			clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
 			resets = <&usb1_rst 4>;
+			phys = <&usb_phy3>;
 			dr_mode = "host";
 		};