diff mbox series

[RFC,1/3] can: m_can: Create m_can core to leverage common code

Message ID 20181010142055.25271-2-dmurphy@ti.com
State New
Headers show
Series M_CAN Framework rework | expand

Commit Message

Dan Murphy Oct. 10, 2018, 2:20 p.m. UTC
Create a common code base that can be leveraged by other
devices that use the Bosch MCAN IP.

The common code manages the MCAN IP as well as registering
the CAN device.

Signed-off-by: Dan Murphy <dmurphy@ti.com>

---
 drivers/net/can/m_can/Kconfig                 |   12 +
 drivers/net/can/m_can/Makefile                |    3 +-
 drivers/net/can/m_can/m_can.c                 | 1683 +----------------
 .../net/can/m_can/{m_can.c => m_can_core.c}   |  479 +++--
 drivers/net/can/m_can/m_can_core.h            |  100 +
 5 files changed, 360 insertions(+), 1917 deletions(-)
 copy drivers/net/can/m_can/{m_can.c => m_can_core.c} (83%)
 create mode 100644 drivers/net/can/m_can/m_can_core.h

-- 
2.19.0

Comments

Wolfgang Grandegger Oct. 27, 2018, 2:19 p.m. UTC | #1
Hello Dan,

for the RFC, could you please just do the necessary changes to the
existing code. We can discuss about better names, etc. later. For
the review if the common code I quickly did:

  mv m_can.c m_can_platform.c
  mv m_can_core.c m_can.c

The file names are similar to what we have for the C_CAN driver.

  s/classdev/priv/
  variable name s/m_can_dev/priv/

Then your patch 1/3 looks as shown below. I'm going to comment on that
one. The comments start with "***"....

From 9966873dc261b2703e0545718222874ba1b88638 Mon Sep 17 00:00:00 2001
From: Dan Murphy <dmurphy@ti.com>

Date: Wed, 10 Oct 2018 09:20:53 -0500
Subject: [PATCH] can: m_can: Create m_can core to leverage common code

Create a common code base that can be leveraged by other
devices that use the Bosch MCAN IP.

The common code manages the MCAN IP as well as registering
the CAN device.

Signed-off-by: Dan Murphy <dmurphy@ti.com>

---
 drivers/net/can/m_can/Kconfig          |  12 +
 drivers/net/can/m_can/Makefile         |   3 +-
 drivers/net/can/m_can/m_can.c          | 385 +++++++++++++++------------------
 drivers/net/can/m_can/m_can_core.h     | 100 +++++++++
 drivers/net/can/m_can/m_can_platform.c | 168 ++++++++++++++
 5 files changed, 461 insertions(+), 207 deletions(-)
 create mode 100644 drivers/net/can/m_can/m_can_core.h
 create mode 100644 drivers/net/can/m_can/m_can_platform.c

diff --git a/drivers/net/can/m_can/Kconfig b/drivers/net/can/m_can/Kconfig
index 04f20dd..b1a9358 100644
--- a/drivers/net/can/m_can/Kconfig
+++ b/drivers/net/can/m_can/Kconfig
@@ -1,5 +1,17 @@
 config CAN_M_CAN
+	tristate "Bosch M_CAN support"
+	---help---
+	  Say Y here if you want to support for Bosch M_CAN controller.
+
+config CAN_M_CAN_CORE
+	depends on CAN_M_CAN
+	tristate "Bosch M_CAN Core support"
+	---help---
+	  Say Y here if you want to support for Bosch M_CAN controller.
+
+config CAN_M_CAN_PLATFORM
 	depends on HAS_IOMEM
+	depends on CAN_M_CAN_CORE
 	tristate "Bosch M_CAN devices"
 	---help---
 	  Say Y here if you want to support for Bosch M_CAN controller.
diff --git a/drivers/net/can/m_can/Makefile b/drivers/net/can/m_can/Makefile
index 8bbd7f2..e013d6f 100644
--- a/drivers/net/can/m_can/Makefile
+++ b/drivers/net/can/m_can/Makefile
@@ -2,4 +2,5 @@
 #  Makefile for the Bosch M_CAN controller driver.
 #
 
-obj-$(CONFIG_CAN_M_CAN) += m_can.o
+obj-$(CONFIG_CAN_M_CAN_CORE) += m_can_core.o
+obj-$(CONFIG_CAN_M_CAN_PLATFORM) += m_can.o

*** I haven't updated Kconfig and Makefile... it needs some adoptions anyway.

diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
index 9b44940..4fb4269 100644
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -28,6 +28,8 @@
 #include <linux/can/dev.h>
 #include <linux/pinctrl/consumer.h>
 
+#include "m_can_core.h"
+
 /* napi related */
 #define M_CAN_NAPI_WEIGHT	64
 
@@ -86,28 +88,6 @@ enum m_can_reg {
 	M_CAN_TXEFA	= 0xf8,
 };
 
-/* m_can lec values */
-enum m_can_lec_type {
-	LEC_NO_ERROR = 0,
-	LEC_STUFF_ERROR,
-	LEC_FORM_ERROR,
-	LEC_ACK_ERROR,
-	LEC_BIT1_ERROR,
-	LEC_BIT0_ERROR,
-	LEC_CRC_ERROR,
-	LEC_UNUSED,
-};
-
-enum m_can_mram_cfg {
-	MRAM_SIDF = 0,
-	MRAM_XIDF,
-	MRAM_RXF0,
-	MRAM_RXF1,
-	MRAM_RXB,
-	MRAM_TXE,
-	MRAM_TXB,
-	MRAM_CFG_NUM,
-};
 
 /* Core Release Register (CREL) */
 #define CREL_REL_SHIFT		28
@@ -347,68 +327,100 @@ enum m_can_mram_cfg {
 #define TX_EVENT_MM_SHIFT	TX_BUF_MM_SHIFT
 #define TX_EVENT_MM_MASK	(0xff << TX_EVENT_MM_SHIFT)
 
-/* address offset and element number for each FIFO/Buffer in the Message RAM */
-struct mram_cfg {
-	u16 off;
-	u8  num;
-};
-
-/* m_can private data structure */
-struct m_can_priv {
-	struct can_priv can;	/* must be the first member */
-	struct napi_struct napi;
-	struct net_device *dev;
-	struct device *device;
-	struct clk *hclk;
-	struct clk *cclk;
-	void __iomem *base;
-	u32 irqstatus;
-	int version;
-
-	/* message ram configuration */
-	void __iomem *mram_base;
-	struct mram_cfg mcfg[MRAM_CFG_NUM];
-};
-
 static inline u32 m_can_read(const struct m_can_priv *priv, enum m_can_reg reg)
 {
-	return readl(priv->base + reg);
+	u32 ret;
+
+	if (priv->m_can_write)
+		ret = priv->m_can_read(priv, priv->reg_offset + reg);
+	else
+		ret = readl(priv->base + reg);

*** Why not just

       return priv->m_can_read(priv, priv->reg_offset, reg);

for both cases. Do we need "reg_offset" here or is it only needed in
platform code?

+
+	return ret;
 }
 
-static inline void m_can_write(const struct m_can_priv *priv,
+static inline int m_can_write(const struct m_can_priv *priv,
 			       enum m_can_reg reg, u32 val)
 {
-	writel(val, priv->base + reg);
+	int ret = 0;
+
+	if (priv->m_can_write)
+		ret = priv->m_can_write(priv, priv->reg_offset + reg, val);
+	else
+		writel(val, priv->base + reg);

*** Ditto.

+
+	return ret;
 }
 
 static inline u32 m_can_fifo_read(const struct m_can_priv *priv,
 				  u32 fgi, unsigned int offset)
 {
-	return readl(priv->mram_base + priv->mcfg[MRAM_RXF0].off +
-		     fgi * RXF0_ELEMENT_SIZE + offset);
+	u32 addr_offset = priv->mcfg[MRAM_RXF0].off + fgi * RXF0_ELEMENT_SIZE + offset;
+	u32 read_fifo_addr; /* need to take into account iomem cases */
+	u32 ret = 0;
+
+	if (priv->mram_start)
+		read_fifo_addr = priv->mram_start + addr_offset;
+	else
+		read_fifo_addr = priv->mram_base + addr_offset;

*** Why do we need two platform-specific variables here? Couldn't it
be hidden in platform-specific code?

+	if (priv->m_can_fifo_read)
+		ret = priv->m_can_read(priv, read_fifo_addr);

*** Shouldn't that use "priv->m_can_fifo_read"? Looking to "tcan4x5x.c",
the functions "m_can_read" and "m_can_fifo_read" are identical.

+	else
+		ret = readl(read_fifo_addr);
+
+	return ret;
 }
 
 static inline void m_can_fifo_write(const struct m_can_priv *priv,
 				    u32 fpi, unsigned int offset, u32 val)
 {
-	writel(val, priv->mram_base + priv->mcfg[MRAM_TXB].off +
-	       fpi * TXB_ELEMENT_SIZE + offset);
+	u32 addr_offset =  priv->mcfg[MRAM_TXB].off + fpi * TXB_ELEMENT_SIZE + offset;
+	u32 write_fifo_addr;
+	u32 ret;
+
+	if (priv->mram_start)
+		write_fifo_addr = priv->mram_start + addr_offset;
+	else
+		write_fifo_addr = priv->mram_base + addr_offset;
+
+	if (priv->m_can_write)
+		ret = priv->m_can_write(priv, write_fifo_addr, val);
+	else
+		writel(val, write_fifo_addr);
+
+	return ret;
 }
 
 static inline u32 m_can_txe_fifo_read(const struct m_can_priv *priv,
 				      u32 fgi,
-				      u32 offset) {
-	return readl(priv->mram_base + priv->mcfg[MRAM_TXE].off +
-			fgi * TXE_ELEMENT_SIZE + offset);
+				      u32 offset)
+{
+	u32 addr_offset = priv->mcfg[MRAM_TXE].off + fgi * TXE_ELEMENT_SIZE + offset;
+	u32 read_fifo_addr;
+	u32 ret = 0;
+
+printk("%s: Here\n", __func__);
+	if (priv->mram_start)
+		read_fifo_addr = priv->mram_start + addr_offset;
+	else
+		read_fifo_addr = priv->mram_base + addr_offset;
+
+	if (priv->m_can_fifo_read)
+		ret = priv->m_can_read(priv, read_fifo_addr);
+	else
+		ret = readl(read_fifo_addr);
+
+	return ret;
 }
 
 static inline bool m_can_tx_fifo_full(const struct m_can_priv *priv)
 {
+printk("%s: Here\n", __func__);
 		return !!(m_can_read(priv, M_CAN_TXFQS) & TXFQS_TFQF);
 }
 
-static inline void m_can_config_endisable(const struct m_can_priv *priv,
-					  bool enable)
+void m_can_config_endisable(const struct m_can_priv *priv, bool enable)
 {
 	u32 cccr = m_can_read(priv, M_CAN_CCCR);
 	u32 timeout = 10;
@@ -430,7 +442,7 @@ static inline void m_can_config_endisable(const struct m_can_priv *priv,
 
 	while ((m_can_read(priv, M_CAN_CCCR) & (CCCR_INIT | CCCR_CCE)) != val) {
 		if (timeout == 0) {
-			netdev_warn(priv->dev, "Failed to init module\n");
+			netdev_warn(priv->net, "Failed to init module\n");
 			return;
 		}
 		timeout--;
@@ -457,7 +469,7 @@ static void m_can_read_fifo(struct net_device *dev, u32 rxfs)
 	struct sk_buff *skb;
 	u32 id, fgi, dlc;
 	int i;
-
+printk("%s: Here\n", __func__);
 	/* calculate the fifo get index for where to read data */
 	fgi = (rxfs & RXFS_FGI_MASK) >> RXFS_FGI_SHIFT;
 	dlc = m_can_fifo_read(priv, fgi, M_CAN_FIFO_DLC);
@@ -512,7 +524,7 @@ static int m_can_do_rx_poll(struct net_device *dev, int quota)
 	struct m_can_priv *priv = netdev_priv(dev);
 	u32 pkts = 0;
 	u32 rxfs;
-
+printk("%s: Here\n", __func__);
 	rxfs = m_can_read(priv, M_CAN_RXF0S);
 	if (!(rxfs & RXFS_FFL_MASK)) {
 		netdev_dbg(dev, "no messages in fifo0\n");
@@ -541,7 +553,7 @@ static int m_can_handle_lost_msg(struct net_device *dev)
 	struct net_device_stats *stats = &dev->stats;
 	struct sk_buff *skb;
 	struct can_frame *frame;
-
+printk("%s: Here\n", __func__);
 	netdev_err(dev, "msg lost in rxf0\n");
 
 	stats->rx_errors++;
@@ -566,7 +578,7 @@ static int m_can_handle_lec_err(struct net_device *dev,
 	struct net_device_stats *stats = &dev->stats;
 	struct can_frame *cf;
 	struct sk_buff *skb;
-
+printk("%s: Here\n", __func__);
 	priv->can.can_stats.bus_error++;
 	stats->rx_errors++;
 
@@ -633,9 +645,12 @@ static int m_can_clk_start(struct m_can_priv *priv)
 {
 	int err;
 
-	err = pm_runtime_get_sync(priv->device);
+	if (priv->pm_clock_support == 0)
+		return 0;
+
+	err = pm_runtime_get_sync(priv->dev);
 	if (err < 0) {
-		pm_runtime_put_noidle(priv->device);
+		pm_runtime_put_noidle(priv->dev);
 		return err;
 	}
 
@@ -644,7 +659,8 @@ static int m_can_clk_start(struct m_can_priv *priv)
 
 static void m_can_clk_stop(struct m_can_priv *priv)
 {
-	pm_runtime_put_sync(priv->device);
+	if (priv->pm_clock_support)
+		pm_runtime_put_sync(priv->dev);
 }
 
 static int m_can_get_berr_counter(const struct net_device *dev,
@@ -1150,17 +1166,17 @@ static void m_can_chip_config(struct net_device *dev)
 
 	/* route all interrupts to INT0 */
 	m_can_write(priv, M_CAN_ILS, ILS_ALL_INT0);
-
+printk("%s: Bit timing\n", __func__);
 	/* set bittiming params */
 	m_can_set_bittiming(dev);
-
+printk("%s: out\n", __func__);
 	m_can_config_endisable(priv, false);
 }
 
 static void m_can_start(struct net_device *dev)
 {
 	struct m_can_priv *priv = netdev_priv(dev);
-
+printk("%s: Hear\n", __func__);
 	/* basic m_can configuration */
 	m_can_chip_config(dev);
 
@@ -1171,6 +1187,7 @@ static void m_can_start(struct net_device *dev)
 
 static int m_can_set_mode(struct net_device *dev, enum can_mode mode)
 {
+printk("%s: Hear\n", __func__);
 	switch (mode) {
 	case CAN_MODE_START:
 		m_can_start(dev);
@@ -1188,20 +1205,17 @@ static int m_can_set_mode(struct net_device *dev, enum can_mode mode)
  * else it returns the release and step coded as:
  * return value = 10 * <release> + 1 * <step>
  */
-static int m_can_check_core_release(void __iomem *m_can_base)
+static int m_can_check_core_release(struct m_can_priv *priv)
 {
 	u32 crel_reg;
 	u8 rel;
 	u8 step;
 	int res;
-	struct m_can_priv temp_priv = {
-		.base = m_can_base
-	};
 
 	/* Read Core Release Version and split into version number
 	 * Example: Version 3.2.1 => rel = 3; step = 2; substep = 1;
 	 */
-	crel_reg = m_can_read(&temp_priv, M_CAN_CREL);
+	crel_reg = m_can_read(priv, M_CAN_CREL);
 	rel = (u8)((crel_reg & CREL_REL_MASK) >> CREL_REL_SHIFT);
 	step = (u8)((crel_reg & CREL_STEP_MASK) >> CREL_STEP_SHIFT);
 
@@ -1222,47 +1236,45 @@ static int m_can_check_core_release(void __iomem *m_can_base)
 static bool m_can_niso_supported(const struct m_can_priv *priv)
 {
 	u32 cccr_reg, cccr_poll;
-	int niso_timeout;
+	int niso_timeout = 0;
 
 	m_can_config_endisable(priv, true);
 	cccr_reg = m_can_read(priv, M_CAN_CCCR);
 	cccr_reg |= CCCR_NISO;
 	m_can_write(priv, M_CAN_CCCR, cccr_reg);
-
-	niso_timeout = readl_poll_timeout((priv->base + M_CAN_CCCR), cccr_poll,
-					  (cccr_poll == cccr_reg), 0, 10);
+printk("%s: Fix readl poll timeout\n", __func__);
+/*	niso_timeout = readl_poll_timeout((priv->base + M_CAN_CCCR), cccr_poll,
+					  (cccr_poll == cccr_reg), 0, 10);*/
 
 	/* Clear NISO */
 	cccr_reg &= ~(CCCR_NISO);
 	m_can_write(priv, M_CAN_CCCR, cccr_reg);
 
 	m_can_config_endisable(priv, false);
-
+printk("%s: out\n", __func__);
 	/* return false if time out (-ETIMEDOUT), else return true */
 	return !niso_timeout;
 }
 
-static int m_can_dev_setup(struct platform_device *pdev, struct net_device *dev,
-			   void __iomem *addr)
+static int m_can_dev_setup(struct net_device *dev)
 {
 	struct m_can_priv *priv;
 	int m_can_version;
 
-	m_can_version = m_can_check_core_release(addr);
+	priv = netdev_priv(dev);
+
+	m_can_version = m_can_check_core_release(priv);
 	/* return if unsupported version */
 	if (!m_can_version) {
-		dev_err(&pdev->dev, "Unsupported version number: %2d",
+		dev_err(priv->dev, "Unsupported version number: %2d",
 			m_can_version);
 		return -EINVAL;
 	}
 
-	priv = netdev_priv(dev);
 	netif_napi_add(dev, &priv->napi, m_can_poll, M_CAN_NAPI_WEIGHT);
 
 	/* Shared properties of all M_CAN versions */
 	priv->version = m_can_version;
-	priv->dev = dev;
-	priv->base = addr;
 	priv->can.do_set_mode = m_can_set_mode;
 	priv->can.do_get_berr_counter = m_can_get_berr_counter;
 
@@ -1297,7 +1309,7 @@ static int m_can_dev_setup(struct platform_device *pdev, struct net_device *dev,
 						: 0);
 		break;
 	default:
-		dev_err(&pdev->dev, "Unsupported version number: %2d",
+		dev_err(priv->dev, "Unsupported version number: %2d",
 			priv->version);
 		return -EINVAL;
 	}
@@ -1515,20 +1527,6 @@ static int register_m_can_dev(struct net_device *dev)
 	return register_candev(dev);
 }
 
-static void m_can_init_ram(struct m_can_priv *priv)
-{
-	int end, i, start;
-
-	/* initialize the entire Message RAM in use to avoid possible
-	 * ECC/parity checksum errors when reading an uninitialized buffer
-	 */
-	start = priv->mcfg[MRAM_SIDF].off;
-	end = priv->mcfg[MRAM_TXB].off +
-		priv->mcfg[MRAM_TXB].num * TXB_ELEMENT_SIZE;
-	for (i = start; i < end; i += 4)
-		writel(0x0, priv->mram_base + i);
-}
-
 static void m_can_of_parse_mram(struct m_can_priv *priv,
 				const u32 *mram_config_vals)
 {
@@ -1556,7 +1554,7 @@ static void m_can_of_parse_mram(struct m_can_priv *priv,
 	priv->mcfg[MRAM_TXB].num = mram_config_vals[7] &
 			(TXBC_NDTB_MASK >> TXBC_NDTB_SHIFT);
 
-	dev_dbg(priv->device,
+	dev_dbg(priv->dev,
 		"mram_base %p sidf 0x%x %d xidf 0x%x %d rxf0 0x%x %d rxf1 0x%x %d rxb 0x%x %d txe 0x%x %d txb 0x%x %d\n",
 		priv->mram_base,
 		priv->mcfg[MRAM_SIDF].off, priv->mcfg[MRAM_SIDF].num,
@@ -1566,63 +1564,57 @@ static void m_can_of_parse_mram(struct m_can_priv *priv,
 		priv->mcfg[MRAM_RXB].off, priv->mcfg[MRAM_RXB].num,
 		priv->mcfg[MRAM_TXE].off, priv->mcfg[MRAM_TXE].num,
 		priv->mcfg[MRAM_TXB].off, priv->mcfg[MRAM_TXB].num);
-
-	m_can_init_ram(priv);
 }
 
-static int m_can_plat_probe(struct platform_device *pdev)
+void m_can_init_ram(struct m_can_priv *priv)
 {
-	struct net_device *dev;
-	struct m_can_priv *priv;
-	struct resource *res;
-	void __iomem *addr;
-	void __iomem *mram_addr;
-	struct clk *hclk, *cclk;
-	int irq, ret;
-	struct device_node *np;
-	u32 mram_config_vals[MRAM_CFG_LEN];
-	u32 tx_fifo_size;
-
-	np = pdev->dev.of_node;
+	int end, i, start;
 
-	hclk = devm_clk_get(&pdev->dev, "hclk");
-	cclk = devm_clk_get(&pdev->dev, "cclk");
+	/* initialize the entire Message RAM in use to avoid possible
+	 * ECC/parity checksum errors when reading an uninitialized buffer
+	 */
+	start = priv->mcfg[MRAM_SIDF].off;
+	end = priv->mcfg[MRAM_TXB].off +
+		priv->mcfg[MRAM_TXB].num * TXB_ELEMENT_SIZE;
 
-	if (IS_ERR(hclk) || IS_ERR(cclk)) {
-		dev_err(&pdev->dev, "no clock found\n");
-		ret = -ENODEV;
-		goto failed_ret;
+	for (i = start; i < end; i += 4) {
+		if (priv->mram_start)
+			m_can_write(priv, priv->mram_start + i, 0x0);
+		else
+			writel(0x0, priv->mram_base + i);

*** See my comments above.

 	}
+}
 
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "m_can");
-	addr = devm_ioremap_resource(&pdev->dev, res);
-	irq = platform_get_irq_byname(pdev, "int0");
+int m_can_core_get_clocks(struct m_can_priv *priv)
+{
+	int ret = 0;
 
-	if (IS_ERR(addr) || irq < 0) {
-		ret = -EINVAL;
-		goto failed_ret;
-	}
+	priv->hclk = devm_clk_get(priv->dev, "hclk");
+	priv->cclk = devm_clk_get(priv->dev, "cclk");
 
-	/* message ram could be shared */
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "message_ram");
-	if (!res) {
+	if (IS_ERR(priv->cclk)) {
+		dev_err(priv->dev, "no clock found\n");
 		ret = -ENODEV;
-		goto failed_ret;
 	}
 
-	mram_addr = devm_ioremap(&pdev->dev, res->start, resource_size(res));
-	if (!mram_addr) {
-		ret = -ENOMEM;
-		goto failed_ret;
-	}
+	return ret;
+}
 
-	/* get message ram configuration */
-	ret = of_property_read_u32_array(np, "bosch,mram-cfg",
-					 mram_config_vals,
-					 sizeof(mram_config_vals) / 4);
+struct m_can_priv *m_can_core_allocate_dev(struct device *dev)
+{
+	struct m_can_priv *class_dev = NULL;
+	u32 mram_config_vals[MRAM_CFG_LEN];
+	struct net_device *net_dev;
+	u32 tx_fifo_size;
+	int ret;
+
+	ret = fwnode_property_read_u32_array(dev_fwnode(dev),
+					     "bosch,mram-cfg",
+					     mram_config_vals,
+					     sizeof(mram_config_vals) / 4);
 	if (ret) {
-		dev_err(&pdev->dev, "Could not get Message RAM configuration.");
-		goto failed_ret;
+		dev_err(dev, "Could not get Message RAM configuration.");
+		goto out;
 	}
 
 	/* Get TX FIFO size
@@ -1631,50 +1623,57 @@ static int m_can_plat_probe(struct platform_device *pdev)
 	tx_fifo_size = mram_config_vals[7];
 
 	/* allocate the m_can device */
-	dev = alloc_candev(sizeof(*priv), tx_fifo_size);
-	if (!dev) {
-		ret = -ENOMEM;
-		goto failed_ret;
+	net_dev = alloc_candev(sizeof(*class_dev), tx_fifo_size);
+	if (!net_dev) {
+		dev_err(dev, "Failed to allocate CAN device");
+		goto out;
 	}
 
-	priv = netdev_priv(dev);
-	dev->irq = irq;
-	priv->device = &pdev->dev;
-	priv->hclk = hclk;
-	priv->cclk = cclk;
-	priv->can.clock.freq = clk_get_rate(cclk);
-	priv->mram_base = mram_addr;
-
-	platform_set_drvdata(pdev, dev);
-	SET_NETDEV_DEV(dev, &pdev->dev);
-
-	/* Enable clocks. Necessary to read Core Release in order to determine
-	 * M_CAN version
-	 */
-	pm_runtime_enable(&pdev->dev);
-	ret = m_can_clk_start(priv);
-	if (ret)
-		goto pm_runtime_fail;
+	class_dev = netdev_priv(net_dev);
+	if (!class_dev) {
+		dev_err(dev, "Failed to init netdev private");
+		goto out;
+	}
+
+	class_dev->net = net_dev;
+	class_dev->dev = dev;
+	SET_NETDEV_DEV(net_dev, dev);
+
+	m_can_of_parse_mram(class_dev, mram_config_vals);
+out:
+	return class_dev;
+}
+
+int m_can_core_register(struct m_can_priv *priv)
+{
+	int ret;
 
-	ret = m_can_dev_setup(pdev, dev, addr);
+	if (priv->pm_clock_support) {
+		pm_runtime_enable(priv->dev);
+		ret = m_can_clk_start(priv);
+		if (ret)
+			goto pm_runtime_fail;
+	}
+
+	ret = priv_setup(priv->net);
 	if (ret)
 		goto clk_disable;
 
-	ret = register_m_can_dev(dev);
+	ret = register_priv(priv->net);
 	if (ret) {
-		dev_err(&pdev->dev, "registering %s failed (err=%d)\n",
-			KBUILD_MODNAME, ret);
+		dev_err(priv->dev, "registering %s failed (err=%d)\n",
+			priv->net->name, ret);
 		goto clk_disable;
 	}
 
-	m_can_of_parse_mram(priv, mram_config_vals);
+	devm_can_led_init(priv->net);
 
-	devm_can_led_init(dev);
+	of_can_transceiver(priv->net);
 
-	of_can_transceiver(dev);
+	dev_info(priv->dev, "%s device registered (irq=%d, version=%d)\n",
+		 KBUILD_MODNAME, priv->net->irq, priv->version);
 
-	dev_info(&pdev->dev, "%s device registered (irq=%d, version=%d)\n",
-		 KBUILD_MODNAME, dev->irq, priv->version);
+	m_can_set_bittiming(priv->net);
 
 	/* Probe finished
 	 * Stop clocks. They will be reactivated once the M_CAN device is opened
@@ -1683,14 +1682,14 @@ static int m_can_plat_probe(struct platform_device *pdev)
 	m_can_clk_stop(priv);
 pm_runtime_fail:
 	if (ret) {
-		pm_runtime_disable(&pdev->dev);
-		free_candev(dev);
+		pm_runtime_disable(priv->dev);
+		free_candev(priv->net);
 	}
-failed_ret:
+
 	return ret;
 }
 
-static __maybe_unused int m_can_suspend(struct device *dev)
+int m_can_core_suspend(struct device *dev)
 {
 	struct net_device *ndev = dev_get_drvdata(dev);
 	struct m_can_priv *priv = netdev_priv(ndev);
@@ -1709,7 +1708,7 @@ static __maybe_unused int m_can_suspend(struct device *dev)
 	return 0;
 }
 
-static __maybe_unused int m_can_resume(struct device *dev)
+int m_can_core_resume(struct device *dev)
 {
 	struct net_device *ndev = dev_get_drvdata(dev);
 	struct m_can_priv *priv = netdev_priv(ndev);
@@ -1747,8 +1746,6 @@ static int m_can_plat_remove(struct platform_device *pdev)
 
 	pm_runtime_disable(&pdev->dev);
 
-	platform_set_drvdata(pdev, NULL);
-
 	free_candev(dev);
 
 	return 0;
@@ -1782,30 +1779,6 @@ static int __maybe_unused m_can_runtime_resume(struct device *dev)
 	return err;
 }
 
-static const struct dev_pm_ops m_can_pmops = {
-	SET_RUNTIME_PM_OPS(m_can_runtime_suspend,
-			   m_can_runtime_resume, NULL)
-	SET_SYSTEM_SLEEP_PM_OPS(m_can_suspend, m_can_resume)
-};
-
-static const struct of_device_id m_can_of_table[] = {
-	{ .compatible = "bosch,m_can", .data = NULL },
-	{ /* sentinel */ },
-};
-MODULE_DEVICE_TABLE(of, m_can_of_table);
-
-static struct platform_driver m_can_plat_driver = {
-	.driver = {
-		.name = KBUILD_MODNAME,
-		.of_match_table = m_can_of_table,
-		.pm     = &m_can_pmops,
-	},
-	.probe = m_can_plat_probe,
-	.remove = m_can_plat_remove,
-};
-
-module_platform_driver(m_can_plat_driver);
-
 MODULE_AUTHOR("Dong Aisheng <b29396@freescale.com>");
 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("CAN bus driver for Bosch M_CAN controller");

*** I didn't review the rest of the patch for now.

Looking to the generic code, you didn't really change the way
the driver is accessing the registers. Also the interrupt handling
and rx polling is as it was before. Does that work properly using
the SPI interface of the TCAN4x5x?

I was also thinking about optimized read/write functions handling
more than 4 bytes of data, e.g. for the CAN payload data. That
would speed-up SPI transfers, I think. But that could also be
introduced later-on.

Wolfgang.
Dan Murphy Oct. 31, 2018, 8:15 p.m. UTC | #2
Wolfgang

Thanks for the review

On 10/27/2018 09:19 AM, Wolfgang Grandegger wrote:
> Hello Dan,

> 

> for the RFC, could you please just do the necessary changes to the

> existing code. We can discuss about better names, etc. later. For

> the review if the common code I quickly did:

> 

>   mv m_can.c m_can_platform.c

>   mv m_can_core.c m_can.c

> 

> The file names are similar to what we have for the C_CAN driver.

> 

>   s/classdev/priv/

>   variable name s/m_can_dev/priv/

> 

> Then your patch 1/3 looks as shown below. I'm going to comment on that

> one. The comments start with "***"....

> 


So you would like me to align the names with the c_can driver?

<snip>
> 

> *** I didn't review the rest of the patch for now.

> 


snipped the code to reply to the comment.

> Looking to the generic code, you didn't really change the way

> the driver is accessing the registers. Also the interrupt handling

> and rx polling is as it was before. Does that work properly using

> the SPI interface of the TCAN4x5x?


I don't want to change any of that yet.  Maybe my cover letter was not clear
or did not go through.

But the intention was just to break out the functionality to create a MCAN framework
that can be used by devices that contain the Bosch MCAN core and provider their own protocal to access
the registers in the device.

I don't want to do any functional changes at this time on the IP code itself until we have a framework.
There should be no regression in the io mapped code.

I did comment on the interrupt handling and asked if a threaded work queue would affect CAN timing.
For the original TCAN driver this was the way it was implemented.

> 

> I was also thinking about optimized read/write functions handling

> more than 4 bytes of data, e.g. for the CAN payload data. That

> would speed-up SPI transfers, I think. But that could also be

> introduced later-on.


That would be the plan.

> 

> Wolfgang.

> 

> 

> 

> 



-- 
------------------
Dan Murphy
Wolfgang Grandegger Nov. 3, 2018, 10:45 a.m. UTC | #3
Hello Dan,

Am 31.10.2018 um 21:15 schrieb Dan Murphy:
> Wolfgang

> 

> Thanks for the review

> 

> On 10/27/2018 09:19 AM, Wolfgang Grandegger wrote:

>> Hello Dan,

>>

>> for the RFC, could you please just do the necessary changes to the

>> existing code. We can discuss about better names, etc. later. For

>> the review if the common code I quickly did:

>>

>>   mv m_can.c m_can_platform.c

>>   mv m_can_core.c m_can.c

>>

>> The file names are similar to what we have for the C_CAN driver.

>>

>>   s/classdev/priv/

>>   variable name s/m_can_dev/priv/

>>

>> Then your patch 1/3 looks as shown below. I'm going to comment on that

>> one. The comments start with "***"....

>>

> 

> So you would like me to align the names with the c_can driver?


That would be the obvious choice.
> <snip>

>>

>> *** I didn't review the rest of the patch for now.

>>

> 

> snipped the code to reply to the comment.

> 

>> Looking to the generic code, you didn't really change the way

>> the driver is accessing the registers. Also the interrupt handling

>> and rx polling is as it was before. Does that work properly using

>> the SPI interface of the TCAN4x5x?

> 

> I don't want to change any of that yet.  Maybe my cover letter was not clear

> or did not go through.

> 

> But the intention was just to break out the functionality to create a MCAN framework

> that can be used by devices that contain the Bosch MCAN core and provider their own protocal to access

> the registers in the device.

> 

> I don't want to do any functional changes at this time on the IP code itself until we have a framework.

> There should be no regression in the io mapped code.

> 

> I did comment on the interrupt handling and asked if a threaded work queue would affect CAN timing.

> For the original TCAN driver this was the way it was implemented.


Do threaded interrupts with RX polling make sense? I think we need a
common interface allowing to select hard-irqs+napi or threaded-irqs.

Wolfgang.
Dan Murphy Nov. 9, 2018, 3:14 p.m. UTC | #4
Wolfgang

On 11/03/2018 05:45 AM, Wolfgang Grandegger wrote:
> Hello Dan,

> 

> Am 31.10.2018 um 21:15 schrieb Dan Murphy:

>> Wolfgang

>>

>> Thanks for the review

>>

>> On 10/27/2018 09:19 AM, Wolfgang Grandegger wrote:

>>> Hello Dan,

>>>

>>> for the RFC, could you please just do the necessary changes to the

>>> existing code. We can discuss about better names, etc. later. For

>>> the review if the common code I quickly did:

>>>

>>>   mv m_can.c m_can_platform.c

>>>   mv m_can_core.c m_can.c

>>>

>>> The file names are similar to what we have for the C_CAN driver.

>>>

>>>   s/classdev/priv/

>>>   variable name s/m_can_dev/priv/

>>>

>>> Then your patch 1/3 looks as shown below. I'm going to comment on that

>>> one. The comments start with "***"....

>>>

>>

>> So you would like me to align the names with the c_can driver?

> 

> That would be the obvious choice.

>> <snip>

>>>

>>> *** I didn't review the rest of the patch for now.

>>>

>>

>> snipped the code to reply to the comment.

>>

>>> Looking to the generic code, you didn't really change the way

>>> the driver is accessing the registers. Also the interrupt handling

>>> and rx polling is as it was before. Does that work properly using

>>> the SPI interface of the TCAN4x5x?

>>

>> I don't want to change any of that yet.  Maybe my cover letter was not clear

>> or did not go through.

>>

>> But the intention was just to break out the functionality to create a MCAN framework

>> that can be used by devices that contain the Bosch MCAN core and provider their own protocal to access

>> the registers in the device.

>>

>> I don't want to do any functional changes at this time on the IP code itself until we have a framework.

>> There should be no regression in the io mapped code.

>>

>> I did comment on the interrupt handling and asked if a threaded work queue would affect CAN timing.

>> For the original TCAN driver this was the way it was implemented.

> 

> Do threaded interrupts with RX polling make sense? I think we need a

> common interface allowing to select hard-irqs+napi or threaded-irqs.

> 


Sorry for the late reply I have been dealing with personal issues.

I guess it would only make sense if the IRQ was edge trigger and not level.

If the message is being processed and the interrupt is not cleared until later the
device may produce another interrupt which may be missed by the processor for external
devices.  Or when coming out of suspend the edge may be missed.

Otherwise if it was a level only then they do not make sense to support both and having to
be able to select between the two would be good.

Dan

> Wolfgang.

> 



-- 
------------------
Dan Murphy
Dan Murphy Jan. 9, 2019, 8:58 p.m. UTC | #5
Wolfgang

On 11/3/18 5:45 AM, Wolfgang Grandegger wrote:
> Hello Dan,

> 

> Am 31.10.2018 um 21:15 schrieb Dan Murphy:

>> Wolfgang

>>

>> Thanks for the review

>>

>> On 10/27/2018 09:19 AM, Wolfgang Grandegger wrote:

>>> Hello Dan,

>>>

>>> for the RFC, could you please just do the necessary changes to the

>>> existing code. We can discuss about better names, etc. later. For

>>> the review if the common code I quickly did:

>>>

>>>   mv m_can.c m_can_platform.c

>>>   mv m_can_core.c m_can.c

>>>

>>> The file names are similar to what we have for the C_CAN driver.

>>>

>>>   s/classdev/priv/

>>>   variable name s/m_can_dev/priv/

>>>

>>> Then your patch 1/3 looks as shown below. I'm going to comment on that

>>> one. The comments start with "***"....

>>>

>>

>> So you would like me to align the names with the c_can driver?

> 

> That would be the obvious choice.

>> <snip>

>>>

>>> *** I didn't review the rest of the patch for now.

>>>

>>

>> snipped the code to reply to the comment.

>>

>>> Looking to the generic code, you didn't really change the way

>>> the driver is accessing the registers. Also the interrupt handling

>>> and rx polling is as it was before. Does that work properly using

>>> the SPI interface of the TCAN4x5x?

>>

>> I don't want to change any of that yet.  Maybe my cover letter was not clear

>> or did not go through.

>>

>> But the intention was just to break out the functionality to create a MCAN framework

>> that can be used by devices that contain the Bosch MCAN core and provider their own protocal to access

>> the registers in the device.

>>

>> I don't want to do any functional changes at this time on the IP code itself until we have a framework.

>> There should be no regression in the io mapped code.

>>

>> I did comment on the interrupt handling and asked if a threaded work queue would affect CAN timing.

>> For the original TCAN driver this was the way it was implemented.

> 

> Do threaded interrupts with RX polling make sense? I think we need a

> common interface allowing to select hard-irqs+napi or threaded-irqs.

> 


I have been working on this code for about a month now and I am *not happy* with the amount of change that needs
to be done to make the m_can a framework.

I can tx/rx frames from another CAN device to the TCAN part but I have not even touched the iomapped code.

The challenging part is that the m_can code that is currently available does not have to worry about atomic context because
there is no peripheral waiting.  Since the TCAN is a peripheral device we need to take into about the hard waits in IRQ context
as well as the atomic context.  Doing this creates many deltas in the base code that may break iomapped devices.  I have had to 
add the thread_irqs and now I am in the midst of the issue you brought up with napi.  I would have to schedule a queue for perp devices
and leave the non-threaded iomapped irq.

At this point I think it may be wise to leave the m_can code alone as it is working and stable and just work on the TCAN driver as
a standalone driver.  A framework would be nice but I think it would destablize the m_can driver which is embedded in many SoC's and
we cannot possibly test everyone of them.

What are your thoughts?

Dan

> Wolfgang.

> 



-- 
------------------
Dan Murphy
Wolfgang Grandegger Jan. 10, 2019, 7:44 a.m. UTC | #6
Hello Dan,

sorry for my late response on that topic...

Am 09.01.19 um 21:58 schrieb Dan Murphy:
> Wolfgang

> 

> On 11/3/18 5:45 AM, Wolfgang Grandegger wrote:

>> Hello Dan,

>>

>> Am 31.10.2018 um 21:15 schrieb Dan Murphy:

>>> Wolfgang

>>>

>>> Thanks for the review

>>>

>>> On 10/27/2018 09:19 AM, Wolfgang Grandegger wrote:

>>>> Hello Dan,

>>>>

>>>> for the RFC, could you please just do the necessary changes to the

>>>> existing code. We can discuss about better names, etc. later. For

>>>> the review if the common code I quickly did:

>>>>

>>>>   mv m_can.c m_can_platform.c

>>>>   mv m_can_core.c m_can.c

>>>>

>>>> The file names are similar to what we have for the C_CAN driver.

>>>>

>>>>   s/classdev/priv/

>>>>   variable name s/m_can_dev/priv/

>>>>

>>>> Then your patch 1/3 looks as shown below. I'm going to comment on that

>>>> one. The comments start with "***"....

>>>>

>>>

>>> So you would like me to align the names with the c_can driver?

>>

>> That would be the obvious choice.

>>> <snip>

>>>>

>>>> *** I didn't review the rest of the patch for now.

>>>>

>>>

>>> snipped the code to reply to the comment.

>>>

>>>> Looking to the generic code, you didn't really change the way

>>>> the driver is accessing the registers. Also the interrupt handling

>>>> and rx polling is as it was before. Does that work properly using

>>>> the SPI interface of the TCAN4x5x?

>>>

>>> I don't want to change any of that yet.  Maybe my cover letter was not clear

>>> or did not go through.

>>>

>>> But the intention was just to break out the functionality to create a MCAN framework

>>> that can be used by devices that contain the Bosch MCAN core and provider their own protocal to access

>>> the registers in the device.

>>>

>>> I don't want to do any functional changes at this time on the IP code itself until we have a framework.

>>> There should be no regression in the io mapped code.

>>>

>>> I did comment on the interrupt handling and asked if a threaded work queue would affect CAN timing.

>>> For the original TCAN driver this was the way it was implemented.

>>

>> Do threaded interrupts with RX polling make sense? I think we need a

>> common interface allowing to select hard-irqs+napi or threaded-irqs.

>>

> 

> I have been working on this code for about a month now and I am *not happy* with the amount of change that needs

> to be done to make the m_can a framework.

> 

> I can tx/rx frames from another CAN device to the TCAN part but I have not even touched the iomapped code.

> 

> The challenging part is that the m_can code that is currently available does not have to worry about atomic context because

> there is no peripheral waiting.  Since the TCAN is a peripheral device we need to take into about the hard waits in IRQ context

> as well as the atomic context.  Doing this creates many deltas in the base code that may break iomapped devices.  I have had to 

> add the thread_irqs and now I am in the midst of the issue you brought up with napi.  I would have to schedule a queue for perp devices

> and leave the non-threaded iomapped irq.

> 

> At this point I think it may be wise to leave the m_can code alone as it is working and stable and just work on the TCAN driver as

> a standalone driver.  A framework would be nice but I think it would destablize the m_can driver which is embedded in many SoC's and

> we cannot possibly test everyone of them.


Unfortunately, I do not have m_can hardware at hand.

> What are your thoughts?


What we need is a common set of functions doing tx, rx, error and state
handling. This will requires substantial changes to the existing
io-mapped m_can driver, of course. I still believe it's worth the
effort, but I agree that it's difficult for you to re-write and test the
existing m_can driver.

What about implementing such a set of common functions plus the SPI
specific part for your TCAN device. What do you/others think?

Wolfgang.
Faiz Abbas Jan. 10, 2019, 7:57 a.m. UTC | #7
Hi Dan, Wolfgang,

On 1/10/2019 1:14 PM, Wolfgang Grandegger wrote:
> Hello Dan,

> 

> sorry for my late response on that topic...

> 

> Am 09.01.19 um 21:58 schrieb Dan Murphy:

>> Wolfgang

>>

>> On 11/3/18 5:45 AM, Wolfgang Grandegger wrote:

>>> Hello Dan,

>>>

>>> Am 31.10.2018 um 21:15 schrieb Dan Murphy:

>>>> Wolfgang

>>>>

>>>> Thanks for the review

>>>>

>>>> On 10/27/2018 09:19 AM, Wolfgang Grandegger wrote:

>>>>> Hello Dan,

>>>>>

>>>>> for the RFC, could you please just do the necessary changes to the

>>>>> existing code. We can discuss about better names, etc. later. For

>>>>> the review if the common code I quickly did:

>>>>>

>>>>>    mv m_can.c m_can_platform.c

>>>>>    mv m_can_core.c m_can.c

>>>>>

>>>>> The file names are similar to what we have for the C_CAN driver.

>>>>>

>>>>>    s/classdev/priv/

>>>>>    variable name s/m_can_dev/priv/

>>>>>

>>>>> Then your patch 1/3 looks as shown below. I'm going to comment on that

>>>>> one. The comments start with "***"....

>>>>>

>>>>

>>>> So you would like me to align the names with the c_can driver?

>>>

>>> That would be the obvious choice.

>>>> <snip>

>>>>>

>>>>> *** I didn't review the rest of the patch for now.

>>>>>

>>>>

>>>> snipped the code to reply to the comment.

>>>>

>>>>> Looking to the generic code, you didn't really change the way

>>>>> the driver is accessing the registers. Also the interrupt handling

>>>>> and rx polling is as it was before. Does that work properly using

>>>>> the SPI interface of the TCAN4x5x?

>>>>

>>>> I don't want to change any of that yet.  Maybe my cover letter was not clear

>>>> or did not go through.

>>>>

>>>> But the intention was just to break out the functionality to create a MCAN framework

>>>> that can be used by devices that contain the Bosch MCAN core and provider their own protocal to access

>>>> the registers in the device.

>>>>

>>>> I don't want to do any functional changes at this time on the IP code itself until we have a framework.

>>>> There should be no regression in the io mapped code.

>>>>

>>>> I did comment on the interrupt handling and asked if a threaded work queue would affect CAN timing.

>>>> For the original TCAN driver this was the way it was implemented.

>>>

>>> Do threaded interrupts with RX polling make sense? I think we need a

>>> common interface allowing to select hard-irqs+napi or threaded-irqs.

>>>

>>

>> I have been working on this code for about a month now and I am *not happy* with the amount of change that needs

>> to be done to make the m_can a framework.

>>

>> I can tx/rx frames from another CAN device to the TCAN part but I have not even touched the iomapped code.

>>

>> The challenging part is that the m_can code that is currently available does not have to worry about atomic context because

>> there is no peripheral waiting.  Since the TCAN is a peripheral device we need to take into about the hard waits in IRQ context

>> as well as the atomic context.  Doing this creates many deltas in the base code that may break iomapped devices.  I have had to

>> add the thread_irqs and now I am in the midst of the issue you brought up with napi.  I would have to schedule a queue for perp devices

>> and leave the non-threaded iomapped irq.

>>

>> At this point I think it may be wise to leave the m_can code alone as it is working and stable and just work on the TCAN driver as

>> a standalone driver.  A framework would be nice but I think it would destablize the m_can driver which is embedded in many SoC's and

>> we cannot possibly test everyone of them.

> 

> Unfortunately, I do not have m_can hardware at hand.


There are exactly 3 platforms in mainline that use the m_can driver. I 
can help Dan test it on a dra76x. I haven't had a chance to look at the 
changes in depth, but just testing for regressions on existing platforms 
shouldn't be too hard once we have it working on one.

Thanks,
Faiz

> 

>> What are your thoughts?

> 

> What we need is a common set of functions doing tx, rx, error and state

> handling. This will requires substantial changes to the existing

> io-mapped m_can driver, of course. I still believe it's worth the

> effort, but I agree that it's difficult for you to re-write and test the

> existing m_can driver.

> 

> What about implementing such a set of common functions plus the SPI

> specific part for your TCAN device. What do you/others think?

> 

> Wolfgang.

>
Dan Murphy Jan. 10, 2019, 12:53 p.m. UTC | #8
Wolfgang

On 1/10/19 1:44 AM, Wolfgang Grandegger wrote:
> Hello Dan,

> 

> sorry for my late response on that topic...

> 

> Am 09.01.19 um 21:58 schrieb Dan Murphy:

>> Wolfgang

>>

>> On 11/3/18 5:45 AM, Wolfgang Grandegger wrote:

>>> Hello Dan,

>>>

>>> Am 31.10.2018 um 21:15 schrieb Dan Murphy:

>>>> Wolfgang

>>>>

>>>> Thanks for the review

>>>>

>>>> On 10/27/2018 09:19 AM, Wolfgang Grandegger wrote:

>>>>> Hello Dan,

>>>>>

>>>>> for the RFC, could you please just do the necessary changes to the

>>>>> existing code. We can discuss about better names, etc. later. For

>>>>> the review if the common code I quickly did:

>>>>>

>>>>>   mv m_can.c m_can_platform.c

>>>>>   mv m_can_core.c m_can.c

>>>>>

>>>>> The file names are similar to what we have for the C_CAN driver.

>>>>>

>>>>>   s/classdev/priv/

>>>>>   variable name s/m_can_dev/priv/

>>>>>

>>>>> Then your patch 1/3 looks as shown below. I'm going to comment on that

>>>>> one. The comments start with "***"....

>>>>>

>>>>

>>>> So you would like me to align the names with the c_can driver?

>>>

>>> That would be the obvious choice.

>>>> <snip>

>>>>>

>>>>> *** I didn't review the rest of the patch for now.

>>>>>

>>>>

>>>> snipped the code to reply to the comment.

>>>>

>>>>> Looking to the generic code, you didn't really change the way

>>>>> the driver is accessing the registers. Also the interrupt handling

>>>>> and rx polling is as it was before. Does that work properly using

>>>>> the SPI interface of the TCAN4x5x?

>>>>

>>>> I don't want to change any of that yet.  Maybe my cover letter was not clear

>>>> or did not go through.

>>>>

>>>> But the intention was just to break out the functionality to create a MCAN framework

>>>> that can be used by devices that contain the Bosch MCAN core and provider their own protocal to access

>>>> the registers in the device.

>>>>

>>>> I don't want to do any functional changes at this time on the IP code itself until we have a framework.

>>>> There should be no regression in the io mapped code.

>>>>

>>>> I did comment on the interrupt handling and asked if a threaded work queue would affect CAN timing.

>>>> For the original TCAN driver this was the way it was implemented.

>>>

>>> Do threaded interrupts with RX polling make sense? I think we need a

>>> common interface allowing to select hard-irqs+napi or threaded-irqs.

>>>

>>

>> I have been working on this code for about a month now and I am *not happy* with the amount of change that needs

>> to be done to make the m_can a framework.

>>

>> I can tx/rx frames from another CAN device to the TCAN part but I have not even touched the iomapped code.

>>

>> The challenging part is that the m_can code that is currently available does not have to worry about atomic context because

>> there is no peripheral waiting.  Since the TCAN is a peripheral device we need to take into about the hard waits in IRQ context

>> as well as the atomic context.  Doing this creates many deltas in the base code that may break iomapped devices.  I have had to 

>> add the thread_irqs and now I am in the midst of the issue you brought up with napi.  I would have to schedule a queue for perp devices

>> and leave the non-threaded iomapped irq.

>>

>> At this point I think it may be wise to leave the m_can code alone as it is working and stable and just work on the TCAN driver as

>> a standalone driver.  A framework would be nice but I think it would destablize the m_can driver which is embedded in many SoC's and

>> we cannot possibly test everyone of them.

> 

> Unfortunately, I do not have m_can hardware at hand.

> 

>> What are your thoughts?

> 

> What we need is a common set of functions doing tx, rx, error and state

> handling. This will requires substantial changes to the existing

> io-mapped m_can driver, of course. I still believe it's worth the

> effort, but I agree that it's difficult for you to re-write and test the

> existing m_can driver.


OK I will keep working on it.  What you are describing is what I have done.
I have abstracted the register reads and writes away and I am in the process
of abstracting away the device specific initialization.

> 

> What about implementing such a set of common functions plus the SPI

> specific part for your TCAN device. What do you/others think?


As stated above this is what I have.  But the m_can driver was written for io-mapped that has no delays
so we need to take into about peripheral wait time in IRQ and atomic context.

This is where the issues are stemming from mainly in the atomic context.

Dan


> 

> Wolfgang.

> 



-- 
------------------
Dan Murphy
Dan Murphy Jan. 10, 2019, 12:54 p.m. UTC | #9
Faiz

On 1/10/19 1:57 AM, Rizvi, Mohammad Faiz Abbas wrote:
> Hi Dan, Wolfgang,

> 

> On 1/10/2019 1:14 PM, Wolfgang Grandegger wrote:

>> Hello Dan,

>>

>> sorry for my late response on that topic...

>>

>> Am 09.01.19 um 21:58 schrieb Dan Murphy:

>>> Wolfgang

>>>

>>> On 11/3/18 5:45 AM, Wolfgang Grandegger wrote:

>>>> Hello Dan,

>>>>

>>>> Am 31.10.2018 um 21:15 schrieb Dan Murphy:

>>>>> Wolfgang

>>>>>

>>>>> Thanks for the review

>>>>>

>>>>> On 10/27/2018 09:19 AM, Wolfgang Grandegger wrote:

>>>>>> Hello Dan,

>>>>>>

>>>>>> for the RFC, could you please just do the necessary changes to the

>>>>>> existing code. We can discuss about better names, etc. later. For

>>>>>> the review if the common code I quickly did:

>>>>>>

>>>>>>    mv m_can.c m_can_platform.c

>>>>>>    mv m_can_core.c m_can.c

>>>>>>

>>>>>> The file names are similar to what we have for the C_CAN driver.

>>>>>>

>>>>>>    s/classdev/priv/

>>>>>>    variable name s/m_can_dev/priv/

>>>>>>

>>>>>> Then your patch 1/3 looks as shown below. I'm going to comment on that

>>>>>> one. The comments start with "***"....

>>>>>>

>>>>>

>>>>> So you would like me to align the names with the c_can driver?

>>>>

>>>> That would be the obvious choice.

>>>>> <snip>

>>>>>>

>>>>>> *** I didn't review the rest of the patch for now.

>>>>>>

>>>>>

>>>>> snipped the code to reply to the comment.

>>>>>

>>>>>> Looking to the generic code, you didn't really change the way

>>>>>> the driver is accessing the registers. Also the interrupt handling

>>>>>> and rx polling is as it was before. Does that work properly using

>>>>>> the SPI interface of the TCAN4x5x?

>>>>>

>>>>> I don't want to change any of that yet.  Maybe my cover letter was not clear

>>>>> or did not go through.

>>>>>

>>>>> But the intention was just to break out the functionality to create a MCAN framework

>>>>> that can be used by devices that contain the Bosch MCAN core and provider their own protocal to access

>>>>> the registers in the device.

>>>>>

>>>>> I don't want to do any functional changes at this time on the IP code itself until we have a framework.

>>>>> There should be no regression in the io mapped code.

>>>>>

>>>>> I did comment on the interrupt handling and asked if a threaded work queue would affect CAN timing.

>>>>> For the original TCAN driver this was the way it was implemented.

>>>>

>>>> Do threaded interrupts with RX polling make sense? I think we need a

>>>> common interface allowing to select hard-irqs+napi or threaded-irqs.

>>>>

>>>

>>> I have been working on this code for about a month now and I am *not happy* with the amount of change that needs

>>> to be done to make the m_can a framework.

>>>

>>> I can tx/rx frames from another CAN device to the TCAN part but I have not even touched the iomapped code.

>>>

>>> The challenging part is that the m_can code that is currently available does not have to worry about atomic context because

>>> there is no peripheral waiting.  Since the TCAN is a peripheral device we need to take into about the hard waits in IRQ context

>>> as well as the atomic context.  Doing this creates many deltas in the base code that may break iomapped devices.  I have had to

>>> add the thread_irqs and now I am in the midst of the issue you brought up with napi.  I would have to schedule a queue for perp devices

>>> and leave the non-threaded iomapped irq.

>>>

>>> At this point I think it may be wise to leave the m_can code alone as it is working and stable and just work on the TCAN driver as

>>> a standalone driver.  A framework would be nice but I think it would destablize the m_can driver which is embedded in many SoC's and

>>> we cannot possibly test everyone of them.

>>

>> Unfortunately, I do not have m_can hardware at hand.

> 

> There are exactly 3 platforms in mainline that use the m_can driver. I can help Dan test it on a dra76x. I haven't had a chance to look at the changes in depth, but just testing for regressions on existing platforms shouldn't be too hard once we have it working on one.

> 


Thanks Faiz.  Once I have the TCAN fully working I will post the branch to my repo.

Dan

> Thanks,

> Faiz

> 

>>

>>> What are your thoughts?

>>

>> What we need is a common set of functions doing tx, rx, error and state

>> handling. This will requires substantial changes to the existing

>> io-mapped m_can driver, of course. I still believe it's worth the

>> effort, but I agree that it's difficult for you to re-write and test the

>> existing m_can driver.

>>

>> What about implementing such a set of common functions plus the SPI

>> specific part for your TCAN device. What do you/others think?

>>

>> Wolfgang.

>>



-- 
------------------
Dan Murphy
Wolfgang Grandegger Jan. 11, 2019, 8:27 a.m. UTC | #10
Hello Dan,

Am 10.01.19 um 13:53 schrieb Dan Murphy:
> Wolfgang

> 

> On 1/10/19 1:44 AM, Wolfgang Grandegger wrote:

>> Hello Dan,

>>

>> sorry for my late response on that topic...

>>

>> Am 09.01.19 um 21:58 schrieb Dan Murphy:

>>> Wolfgang

>>>

>>> On 11/3/18 5:45 AM, Wolfgang Grandegger wrote:

>>>> Hello Dan,

>>>>

>>>> Am 31.10.2018 um 21:15 schrieb Dan Murphy:

>>>>> Wolfgang

>>>>>

>>>>> Thanks for the review

>>>>>

>>>>> On 10/27/2018 09:19 AM, Wolfgang Grandegger wrote:

>>>>>> Hello Dan,

>>>>>>

>>>>>> for the RFC, could you please just do the necessary changes to the

>>>>>> existing code. We can discuss about better names, etc. later. For

>>>>>> the review if the common code I quickly did:

>>>>>>

>>>>>>   mv m_can.c m_can_platform.c

>>>>>>   mv m_can_core.c m_can.c

>>>>>>

>>>>>> The file names are similar to what we have for the C_CAN driver.

>>>>>>

>>>>>>   s/classdev/priv/

>>>>>>   variable name s/m_can_dev/priv/

>>>>>>

>>>>>> Then your patch 1/3 looks as shown below. I'm going to comment on that

>>>>>> one. The comments start with "***"....

>>>>>>

>>>>>

>>>>> So you would like me to align the names with the c_can driver?

>>>>

>>>> That would be the obvious choice.

>>>>> <snip>

>>>>>>

>>>>>> *** I didn't review the rest of the patch for now.

>>>>>>

>>>>>

>>>>> snipped the code to reply to the comment.

>>>>>

>>>>>> Looking to the generic code, you didn't really change the way

>>>>>> the driver is accessing the registers. Also the interrupt handling

>>>>>> and rx polling is as it was before. Does that work properly using

>>>>>> the SPI interface of the TCAN4x5x?

>>>>>

>>>>> I don't want to change any of that yet.  Maybe my cover letter was not clear

>>>>> or did not go through.

>>>>>

>>>>> But the intention was just to break out the functionality to create a MCAN framework

>>>>> that can be used by devices that contain the Bosch MCAN core and provider their own protocal to access

>>>>> the registers in the device.

>>>>>

>>>>> I don't want to do any functional changes at this time on the IP code itself until we have a framework.

>>>>> There should be no regression in the io mapped code.

>>>>>

>>>>> I did comment on the interrupt handling and asked if a threaded work queue would affect CAN timing.

>>>>> For the original TCAN driver this was the way it was implemented.

>>>>

>>>> Do threaded interrupts with RX polling make sense? I think we need a

>>>> common interface allowing to select hard-irqs+napi or threaded-irqs.

>>>>

>>>

>>> I have been working on this code for about a month now and I am *not happy* with the amount of change that needs

>>> to be done to make the m_can a framework.

>>>

>>> I can tx/rx frames from another CAN device to the TCAN part but I have not even touched the iomapped code.

>>>

>>> The challenging part is that the m_can code that is currently available does not have to worry about atomic context because

>>> there is no peripheral waiting.  Since the TCAN is a peripheral device we need to take into about the hard waits in IRQ context

>>> as well as the atomic context.  Doing this creates many deltas in the base code that may break iomapped devices.  I have had to 

>>> add the thread_irqs and now I am in the midst of the issue you brought up with napi.  I would have to schedule a queue for perp devices

>>> and leave the non-threaded iomapped irq.

>>>

>>> At this point I think it may be wise to leave the m_can code alone as it is working and stable and just work on the TCAN driver as

>>> a standalone driver.  A framework would be nice but I think it would destablize the m_can driver which is embedded in many SoC's and

>>> we cannot possibly test everyone of them.

>>

>> Unfortunately, I do not have m_can hardware at hand.

>>

>>> What are your thoughts?

>>

>> What we need is a common set of functions doing tx, rx, error and state

>> handling. This will requires substantial changes to the existing

>> io-mapped m_can driver, of course. I still believe it's worth the

>> effort, but I agree that it's difficult for you to re-write and test the

>> existing m_can driver.

> 

> OK I will keep working on it.  What you are describing is what I have done.

> I have abstracted the register reads and writes away and I am in the process

> of abstracting away the device specific initialization.


Would be nice if you could show your current implementation...

>>

>> What about implementing such a set of common functions plus the SPI

>> specific part for your TCAN device. What do you/others think?

> 

> As stated above this is what I have.  But the m_can driver was written for io-mapped that has no delays

> so we need to take into about peripheral wait time in IRQ and atomic context.

> 

> This is where the issues are stemming from mainly in the atomic context.


... to understand a bit better what you exactly mean. Or does the last
patch you sent already highlight them.

Wolfgang.
Dan Murphy Jan. 11, 2019, 12:27 p.m. UTC | #11
Wolfgang

On 1/11/19 2:27 AM, Wolfgang Grandegger wrote:
> Hello Dan,

> 

> Am 10.01.19 um 13:53 schrieb Dan Murphy:

>> Wolfgang

>>

>> On 1/10/19 1:44 AM, Wolfgang Grandegger wrote:

>>> Hello Dan,

>>>

>>> sorry for my late response on that topic...

>>>

>>> Am 09.01.19 um 21:58 schrieb Dan Murphy:

>>>> Wolfgang

>>>>

>>>> On 11/3/18 5:45 AM, Wolfgang Grandegger wrote:

>>>>> Hello Dan,

>>>>>

>>>>> Am 31.10.2018 um 21:15 schrieb Dan Murphy:

>>>>>> Wolfgang

>>>>>>

>>>>>> Thanks for the review

>>>>>>

>>>>>> On 10/27/2018 09:19 AM, Wolfgang Grandegger wrote:

>>>>>>> Hello Dan,

>>>>>>>

>>>>>>> for the RFC, could you please just do the necessary changes to the

>>>>>>> existing code. We can discuss about better names, etc. later. For

>>>>>>> the review if the common code I quickly did:

>>>>>>>

>>>>>>>   mv m_can.c m_can_platform.c

>>>>>>>   mv m_can_core.c m_can.c

>>>>>>>

>>>>>>> The file names are similar to what we have for the C_CAN driver.

>>>>>>>

>>>>>>>   s/classdev/priv/

>>>>>>>   variable name s/m_can_dev/priv/

>>>>>>>

>>>>>>> Then your patch 1/3 looks as shown below. I'm going to comment on that

>>>>>>> one. The comments start with "***"....

>>>>>>>

>>>>>>

>>>>>> So you would like me to align the names with the c_can driver?

>>>>>

>>>>> That would be the obvious choice.

>>>>>> <snip>

>>>>>>>

>>>>>>> *** I didn't review the rest of the patch for now.

>>>>>>>

>>>>>>

>>>>>> snipped the code to reply to the comment.

>>>>>>

>>>>>>> Looking to the generic code, you didn't really change the way

>>>>>>> the driver is accessing the registers. Also the interrupt handling

>>>>>>> and rx polling is as it was before. Does that work properly using

>>>>>>> the SPI interface of the TCAN4x5x?

>>>>>>

>>>>>> I don't want to change any of that yet.  Maybe my cover letter was not clear

>>>>>> or did not go through.

>>>>>>

>>>>>> But the intention was just to break out the functionality to create a MCAN framework

>>>>>> that can be used by devices that contain the Bosch MCAN core and provider their own protocal to access

>>>>>> the registers in the device.

>>>>>>

>>>>>> I don't want to do any functional changes at this time on the IP code itself until we have a framework.

>>>>>> There should be no regression in the io mapped code.

>>>>>>

>>>>>> I did comment on the interrupt handling and asked if a threaded work queue would affect CAN timing.

>>>>>> For the original TCAN driver this was the way it was implemented.

>>>>>

>>>>> Do threaded interrupts with RX polling make sense? I think we need a

>>>>> common interface allowing to select hard-irqs+napi or threaded-irqs.

>>>>>

>>>>

>>>> I have been working on this code for about a month now and I am *not happy* with the amount of change that needs

>>>> to be done to make the m_can a framework.

>>>>

>>>> I can tx/rx frames from another CAN device to the TCAN part but I have not even touched the iomapped code.

>>>>

>>>> The challenging part is that the m_can code that is currently available does not have to worry about atomic context because

>>>> there is no peripheral waiting.  Since the TCAN is a peripheral device we need to take into about the hard waits in IRQ context

>>>> as well as the atomic context.  Doing this creates many deltas in the base code that may break iomapped devices.  I have had to 

>>>> add the thread_irqs and now I am in the midst of the issue you brought up with napi.  I would have to schedule a queue for perp devices

>>>> and leave the non-threaded iomapped irq.

>>>>

>>>> At this point I think it may be wise to leave the m_can code alone as it is working and stable and just work on the TCAN driver as

>>>> a standalone driver.  A framework would be nice but I think it would destablize the m_can driver which is embedded in many SoC's and

>>>> we cannot possibly test everyone of them.

>>>

>>> Unfortunately, I do not have m_can hardware at hand.

>>>

>>>> What are your thoughts?

>>>

>>> What we need is a common set of functions doing tx, rx, error and state

>>> handling. This will requires substantial changes to the existing

>>> io-mapped m_can driver, of course. I still believe it's worth the

>>> effort, but I agree that it's difficult for you to re-write and test the

>>> existing m_can driver.

>>

>> OK I will keep working on it.  What you are describing is what I have done.

>> I have abstracted the register reads and writes away and I am in the process

>> of abstracting away the device specific initialization.

> 

> Would be nice if you could show your current implementation...

> 


I did submit v2 with the current implementation but the code has changed a bit since then
I clean up the code and post v3 today after I get the Rx working properly.

>>>

>>> What about implementing such a set of common functions plus the SPI

>>> specific part for your TCAN device. What do you/others think?

>>

>> As stated above this is what I have.  But the m_can driver was written for io-mapped that has no delays

>> so we need to take into about peripheral wait time in IRQ and atomic context.

>>

>> This is where the issues are stemming from mainly in the atomic context.

> 

> ... to understand a bit better what you exactly mean. Or does the last

> patch you sent already highlight them.


v3 will show the deltas

Dan

> 

> Wolfgang.

> 



-- 
------------------
Dan Murphy
diff mbox series

Patch

diff --git a/drivers/net/can/m_can/Kconfig b/drivers/net/can/m_can/Kconfig
index 04f20dd39007..b1a9358b7660 100644
--- a/drivers/net/can/m_can/Kconfig
+++ b/drivers/net/can/m_can/Kconfig
@@ -1,5 +1,17 @@ 
 config CAN_M_CAN
+	tristate "Bosch M_CAN support"
+	---help---
+	  Say Y here if you want to support for Bosch M_CAN controller.
+
+config CAN_M_CAN_CORE
+	depends on CAN_M_CAN
+	tristate "Bosch M_CAN Core support"
+	---help---
+	  Say Y here if you want to support for Bosch M_CAN controller.
+
+config CAN_M_CAN_PLATFORM
 	depends on HAS_IOMEM
+	depends on CAN_M_CAN_CORE
 	tristate "Bosch M_CAN devices"
 	---help---
 	  Say Y here if you want to support for Bosch M_CAN controller.
diff --git a/drivers/net/can/m_can/Makefile b/drivers/net/can/m_can/Makefile
index 8bbd7f24f5be..e013d6f4c941 100644
--- a/drivers/net/can/m_can/Makefile
+++ b/drivers/net/can/m_can/Makefile
@@ -2,4 +2,5 @@ 
 #  Makefile for the Bosch M_CAN controller driver.
 #
 
-obj-$(CONFIG_CAN_M_CAN) += m_can.o
+obj-$(CONFIG_CAN_M_CAN_CORE) += m_can_core.o
+obj-$(CONFIG_CAN_M_CAN_PLATFORM) += m_can.o
diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
index 9b449400376b..079cb31d2da3 100644
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -14,1590 +14,34 @@ 
  */
 
 #include <linux/clk.h>
-#include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/netdevice.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
-#include <linux/iopoll.h>
 #include <linux/can/dev.h>
 #include <linux/pinctrl/consumer.h>
 
-/* napi related */
-#define M_CAN_NAPI_WEIGHT	64
-
-/* message ram configuration data length */
-#define MRAM_CFG_LEN	8
-
-/* registers definition */
-enum m_can_reg {
-	M_CAN_CREL	= 0x0,
-	M_CAN_ENDN	= 0x4,
-	M_CAN_CUST	= 0x8,
-	M_CAN_DBTP	= 0xc,
-	M_CAN_TEST	= 0x10,
-	M_CAN_RWD	= 0x14,
-	M_CAN_CCCR	= 0x18,
-	M_CAN_NBTP	= 0x1c,
-	M_CAN_TSCC	= 0x20,
-	M_CAN_TSCV	= 0x24,
-	M_CAN_TOCC	= 0x28,
-	M_CAN_TOCV	= 0x2c,
-	M_CAN_ECR	= 0x40,
-	M_CAN_PSR	= 0x44,
-/* TDCR Register only available for version >=3.1.x */
-	M_CAN_TDCR	= 0x48,
-	M_CAN_IR	= 0x50,
-	M_CAN_IE	= 0x54,
-	M_CAN_ILS	= 0x58,
-	M_CAN_ILE	= 0x5c,
-	M_CAN_GFC	= 0x80,
-	M_CAN_SIDFC	= 0x84,
-	M_CAN_XIDFC	= 0x88,
-	M_CAN_XIDAM	= 0x90,
-	M_CAN_HPMS	= 0x94,
-	M_CAN_NDAT1	= 0x98,
-	M_CAN_NDAT2	= 0x9c,
-	M_CAN_RXF0C	= 0xa0,
-	M_CAN_RXF0S	= 0xa4,
-	M_CAN_RXF0A	= 0xa8,
-	M_CAN_RXBC	= 0xac,
-	M_CAN_RXF1C	= 0xb0,
-	M_CAN_RXF1S	= 0xb4,
-	M_CAN_RXF1A	= 0xb8,
-	M_CAN_RXESC	= 0xbc,
-	M_CAN_TXBC	= 0xc0,
-	M_CAN_TXFQS	= 0xc4,
-	M_CAN_TXESC	= 0xc8,
-	M_CAN_TXBRP	= 0xcc,
-	M_CAN_TXBAR	= 0xd0,
-	M_CAN_TXBCR	= 0xd4,
-	M_CAN_TXBTO	= 0xd8,
-	M_CAN_TXBCF	= 0xdc,
-	M_CAN_TXBTIE	= 0xe0,
-	M_CAN_TXBCIE	= 0xe4,
-	M_CAN_TXEFC	= 0xf0,
-	M_CAN_TXEFS	= 0xf4,
-	M_CAN_TXEFA	= 0xf8,
-};
-
-/* m_can lec values */
-enum m_can_lec_type {
-	LEC_NO_ERROR = 0,
-	LEC_STUFF_ERROR,
-	LEC_FORM_ERROR,
-	LEC_ACK_ERROR,
-	LEC_BIT1_ERROR,
-	LEC_BIT0_ERROR,
-	LEC_CRC_ERROR,
-	LEC_UNUSED,
-};
-
-enum m_can_mram_cfg {
-	MRAM_SIDF = 0,
-	MRAM_XIDF,
-	MRAM_RXF0,
-	MRAM_RXF1,
-	MRAM_RXB,
-	MRAM_TXE,
-	MRAM_TXB,
-	MRAM_CFG_NUM,
-};
-
-/* Core Release Register (CREL) */
-#define CREL_REL_SHIFT		28
-#define CREL_REL_MASK		(0xF << CREL_REL_SHIFT)
-#define CREL_STEP_SHIFT		24
-#define CREL_STEP_MASK		(0xF << CREL_STEP_SHIFT)
-#define CREL_SUBSTEP_SHIFT	20
-#define CREL_SUBSTEP_MASK	(0xF << CREL_SUBSTEP_SHIFT)
-
-/* Data Bit Timing & Prescaler Register (DBTP) */
-#define DBTP_TDC		BIT(23)
-#define DBTP_DBRP_SHIFT		16
-#define DBTP_DBRP_MASK		(0x1f << DBTP_DBRP_SHIFT)
-#define DBTP_DTSEG1_SHIFT	8
-#define DBTP_DTSEG1_MASK	(0x1f << DBTP_DTSEG1_SHIFT)
-#define DBTP_DTSEG2_SHIFT	4
-#define DBTP_DTSEG2_MASK	(0xf << DBTP_DTSEG2_SHIFT)
-#define DBTP_DSJW_SHIFT		0
-#define DBTP_DSJW_MASK		(0xf << DBTP_DSJW_SHIFT)
-
-/* Transmitter Delay Compensation Register (TDCR) */
-#define TDCR_TDCO_SHIFT		8
-#define TDCR_TDCO_MASK		(0x7F << TDCR_TDCO_SHIFT)
-#define TDCR_TDCF_SHIFT		0
-#define TDCR_TDCF_MASK		(0x7F << TDCR_TDCF_SHIFT)
-
-/* Test Register (TEST) */
-#define TEST_LBCK		BIT(4)
-
-/* CC Control Register(CCCR) */
-#define CCCR_CMR_MASK		0x3
-#define CCCR_CMR_SHIFT		10
-#define CCCR_CMR_CANFD		0x1
-#define CCCR_CMR_CANFD_BRS	0x2
-#define CCCR_CMR_CAN		0x3
-#define CCCR_CME_MASK		0x3
-#define CCCR_CME_SHIFT		8
-#define CCCR_CME_CAN		0
-#define CCCR_CME_CANFD		0x1
-#define CCCR_CME_CANFD_BRS	0x2
-#define CCCR_TXP		BIT(14)
-#define CCCR_TEST		BIT(7)
-#define CCCR_MON		BIT(5)
-#define CCCR_CSR		BIT(4)
-#define CCCR_CSA		BIT(3)
-#define CCCR_ASM		BIT(2)
-#define CCCR_CCE		BIT(1)
-#define CCCR_INIT		BIT(0)
-#define CCCR_CANFD		0x10
-/* for version >=3.1.x */
-#define CCCR_EFBI		BIT(13)
-#define CCCR_PXHD		BIT(12)
-#define CCCR_BRSE		BIT(9)
-#define CCCR_FDOE		BIT(8)
-/* only for version >=3.2.x */
-#define CCCR_NISO		BIT(15)
-
-/* Nominal Bit Timing & Prescaler Register (NBTP) */
-#define NBTP_NSJW_SHIFT		25
-#define NBTP_NSJW_MASK		(0x7f << NBTP_NSJW_SHIFT)
-#define NBTP_NBRP_SHIFT		16
-#define NBTP_NBRP_MASK		(0x1ff << NBTP_NBRP_SHIFT)
-#define NBTP_NTSEG1_SHIFT	8
-#define NBTP_NTSEG1_MASK	(0xff << NBTP_NTSEG1_SHIFT)
-#define NBTP_NTSEG2_SHIFT	0
-#define NBTP_NTSEG2_MASK	(0x7f << NBTP_NTSEG2_SHIFT)
-
-/* Error Counter Register(ECR) */
-#define ECR_RP			BIT(15)
-#define ECR_REC_SHIFT		8
-#define ECR_REC_MASK		(0x7f << ECR_REC_SHIFT)
-#define ECR_TEC_SHIFT		0
-#define ECR_TEC_MASK		0xff
-
-/* Protocol Status Register(PSR) */
-#define PSR_BO		BIT(7)
-#define PSR_EW		BIT(6)
-#define PSR_EP		BIT(5)
-#define PSR_LEC_MASK	0x7
-
-/* Interrupt Register(IR) */
-#define IR_ALL_INT	0xffffffff
-
-/* Renamed bits for versions > 3.1.x */
-#define IR_ARA		BIT(29)
-#define IR_PED		BIT(28)
-#define IR_PEA		BIT(27)
-
-/* Bits for version 3.0.x */
-#define IR_STE		BIT(31)
-#define IR_FOE		BIT(30)
-#define IR_ACKE		BIT(29)
-#define IR_BE		BIT(28)
-#define IR_CRCE		BIT(27)
-#define IR_WDI		BIT(26)
-#define IR_BO		BIT(25)
-#define IR_EW		BIT(24)
-#define IR_EP		BIT(23)
-#define IR_ELO		BIT(22)
-#define IR_BEU		BIT(21)
-#define IR_BEC		BIT(20)
-#define IR_DRX		BIT(19)
-#define IR_TOO		BIT(18)
-#define IR_MRAF		BIT(17)
-#define IR_TSW		BIT(16)
-#define IR_TEFL		BIT(15)
-#define IR_TEFF		BIT(14)
-#define IR_TEFW		BIT(13)
-#define IR_TEFN		BIT(12)
-#define IR_TFE		BIT(11)
-#define IR_TCF		BIT(10)
-#define IR_TC		BIT(9)
-#define IR_HPM		BIT(8)
-#define IR_RF1L		BIT(7)
-#define IR_RF1F		BIT(6)
-#define IR_RF1W		BIT(5)
-#define IR_RF1N		BIT(4)
-#define IR_RF0L		BIT(3)
-#define IR_RF0F		BIT(2)
-#define IR_RF0W		BIT(1)
-#define IR_RF0N		BIT(0)
-#define IR_ERR_STATE	(IR_BO | IR_EW | IR_EP)
-
-/* Interrupts for version 3.0.x */
-#define IR_ERR_LEC_30X	(IR_STE	| IR_FOE | IR_ACKE | IR_BE | IR_CRCE)
-#define IR_ERR_BUS_30X	(IR_ERR_LEC_30X | IR_WDI | IR_ELO | IR_BEU | \
-			 IR_BEC | IR_TOO | IR_MRAF | IR_TSW | IR_TEFL | \
-			 IR_RF1L | IR_RF0L)
-#define IR_ERR_ALL_30X	(IR_ERR_STATE | IR_ERR_BUS_30X)
-/* Interrupts for version >= 3.1.x */
-#define IR_ERR_LEC_31X	(IR_PED | IR_PEA)
-#define IR_ERR_BUS_31X      (IR_ERR_LEC_31X | IR_WDI | IR_ELO | IR_BEU | \
-			 IR_BEC | IR_TOO | IR_MRAF | IR_TSW | IR_TEFL | \
-			 IR_RF1L | IR_RF0L)
-#define IR_ERR_ALL_31X	(IR_ERR_STATE | IR_ERR_BUS_31X)
-
-/* Interrupt Line Select (ILS) */
-#define ILS_ALL_INT0	0x0
-#define ILS_ALL_INT1	0xFFFFFFFF
-
-/* Interrupt Line Enable (ILE) */
-#define ILE_EINT1	BIT(1)
-#define ILE_EINT0	BIT(0)
-
-/* Rx FIFO 0/1 Configuration (RXF0C/RXF1C) */
-#define RXFC_FWM_SHIFT	24
-#define RXFC_FWM_MASK	(0x7f << RXFC_FWM_SHIFT)
-#define RXFC_FS_SHIFT	16
-#define RXFC_FS_MASK	(0x7f << RXFC_FS_SHIFT)
-
-/* Rx FIFO 0/1 Status (RXF0S/RXF1S) */
-#define RXFS_RFL	BIT(25)
-#define RXFS_FF		BIT(24)
-#define RXFS_FPI_SHIFT	16
-#define RXFS_FPI_MASK	0x3f0000
-#define RXFS_FGI_SHIFT	8
-#define RXFS_FGI_MASK	0x3f00
-#define RXFS_FFL_MASK	0x7f
-
-/* Rx Buffer / FIFO Element Size Configuration (RXESC) */
-#define M_CAN_RXESC_8BYTES	0x0
-#define M_CAN_RXESC_64BYTES	0x777
-
-/* Tx Buffer Configuration(TXBC) */
-#define TXBC_NDTB_SHIFT		16
-#define TXBC_NDTB_MASK		(0x3f << TXBC_NDTB_SHIFT)
-#define TXBC_TFQS_SHIFT		24
-#define TXBC_TFQS_MASK		(0x3f << TXBC_TFQS_SHIFT)
-
-/* Tx FIFO/Queue Status (TXFQS) */
-#define TXFQS_TFQF		BIT(21)
-#define TXFQS_TFQPI_SHIFT	16
-#define TXFQS_TFQPI_MASK	(0x1f << TXFQS_TFQPI_SHIFT)
-#define TXFQS_TFGI_SHIFT	8
-#define TXFQS_TFGI_MASK		(0x1f << TXFQS_TFGI_SHIFT)
-#define TXFQS_TFFL_SHIFT	0
-#define TXFQS_TFFL_MASK		(0x3f << TXFQS_TFFL_SHIFT)
-
-/* Tx Buffer Element Size Configuration(TXESC) */
-#define TXESC_TBDS_8BYTES	0x0
-#define TXESC_TBDS_64BYTES	0x7
-
-/* Tx Event FIFO Configuration (TXEFC) */
-#define TXEFC_EFS_SHIFT		16
-#define TXEFC_EFS_MASK		(0x3f << TXEFC_EFS_SHIFT)
-
-/* Tx Event FIFO Status (TXEFS) */
-#define TXEFS_TEFL		BIT(25)
-#define TXEFS_EFF		BIT(24)
-#define TXEFS_EFGI_SHIFT	8
-#define	TXEFS_EFGI_MASK		(0x1f << TXEFS_EFGI_SHIFT)
-#define TXEFS_EFFL_SHIFT	0
-#define TXEFS_EFFL_MASK		(0x3f << TXEFS_EFFL_SHIFT)
-
-/* Tx Event FIFO Acknowledge (TXEFA) */
-#define TXEFA_EFAI_SHIFT	0
-#define TXEFA_EFAI_MASK		(0x1f << TXEFA_EFAI_SHIFT)
-
-/* Message RAM Configuration (in bytes) */
-#define SIDF_ELEMENT_SIZE	4
-#define XIDF_ELEMENT_SIZE	8
-#define RXF0_ELEMENT_SIZE	72
-#define RXF1_ELEMENT_SIZE	72
-#define RXB_ELEMENT_SIZE	72
-#define TXE_ELEMENT_SIZE	8
-#define TXB_ELEMENT_SIZE	72
-
-/* Message RAM Elements */
-#define M_CAN_FIFO_ID		0x0
-#define M_CAN_FIFO_DLC		0x4
-#define M_CAN_FIFO_DATA(n)	(0x8 + ((n) << 2))
-
-/* Rx Buffer Element */
-/* R0 */
-#define RX_BUF_ESI		BIT(31)
-#define RX_BUF_XTD		BIT(30)
-#define RX_BUF_RTR		BIT(29)
-/* R1 */
-#define RX_BUF_ANMF		BIT(31)
-#define RX_BUF_FDF		BIT(21)
-#define RX_BUF_BRS		BIT(20)
-
-/* Tx Buffer Element */
-/* T0 */
-#define TX_BUF_ESI		BIT(31)
-#define TX_BUF_XTD		BIT(30)
-#define TX_BUF_RTR		BIT(29)
-/* T1 */
-#define TX_BUF_EFC		BIT(23)
-#define TX_BUF_FDF		BIT(21)
-#define TX_BUF_BRS		BIT(20)
-#define TX_BUF_MM_SHIFT		24
-#define TX_BUF_MM_MASK		(0xff << TX_BUF_MM_SHIFT)
-
-/* Tx event FIFO Element */
-/* E1 */
-#define TX_EVENT_MM_SHIFT	TX_BUF_MM_SHIFT
-#define TX_EVENT_MM_MASK	(0xff << TX_EVENT_MM_SHIFT)
-
-/* address offset and element number for each FIFO/Buffer in the Message RAM */
-struct mram_cfg {
-	u16 off;
-	u8  num;
-};
-
-/* m_can private data structure */
-struct m_can_priv {
-	struct can_priv can;	/* must be the first member */
-	struct napi_struct napi;
-	struct net_device *dev;
-	struct device *device;
-	struct clk *hclk;
-	struct clk *cclk;
-	void __iomem *base;
-	u32 irqstatus;
-	int version;
-
-	/* message ram configuration */
-	void __iomem *mram_base;
-	struct mram_cfg mcfg[MRAM_CFG_NUM];
-};
-
-static inline u32 m_can_read(const struct m_can_priv *priv, enum m_can_reg reg)
-{
-	return readl(priv->base + reg);
-}
-
-static inline void m_can_write(const struct m_can_priv *priv,
-			       enum m_can_reg reg, u32 val)
-{
-	writel(val, priv->base + reg);
-}
-
-static inline u32 m_can_fifo_read(const struct m_can_priv *priv,
-				  u32 fgi, unsigned int offset)
-{
-	return readl(priv->mram_base + priv->mcfg[MRAM_RXF0].off +
-		     fgi * RXF0_ELEMENT_SIZE + offset);
-}
-
-static inline void m_can_fifo_write(const struct m_can_priv *priv,
-				    u32 fpi, unsigned int offset, u32 val)
-{
-	writel(val, priv->mram_base + priv->mcfg[MRAM_TXB].off +
-	       fpi * TXB_ELEMENT_SIZE + offset);
-}
-
-static inline u32 m_can_txe_fifo_read(const struct m_can_priv *priv,
-				      u32 fgi,
-				      u32 offset) {
-	return readl(priv->mram_base + priv->mcfg[MRAM_TXE].off +
-			fgi * TXE_ELEMENT_SIZE + offset);
-}
-
-static inline bool m_can_tx_fifo_full(const struct m_can_priv *priv)
-{
-		return !!(m_can_read(priv, M_CAN_TXFQS) & TXFQS_TFQF);
-}
-
-static inline void m_can_config_endisable(const struct m_can_priv *priv,
-					  bool enable)
-{
-	u32 cccr = m_can_read(priv, M_CAN_CCCR);
-	u32 timeout = 10;
-	u32 val = 0;
-
-	if (enable) {
-		/* enable m_can configuration */
-		m_can_write(priv, M_CAN_CCCR, cccr | CCCR_INIT);
-		udelay(5);
-		/* CCCR.CCE can only be set/reset while CCCR.INIT = '1' */
-		m_can_write(priv, M_CAN_CCCR, cccr | CCCR_INIT | CCCR_CCE);
-	} else {
-		m_can_write(priv, M_CAN_CCCR, cccr & ~(CCCR_INIT | CCCR_CCE));
-	}
-
-	/* there's a delay for module initialization */
-	if (enable)
-		val = CCCR_INIT | CCCR_CCE;
-
-	while ((m_can_read(priv, M_CAN_CCCR) & (CCCR_INIT | CCCR_CCE)) != val) {
-		if (timeout == 0) {
-			netdev_warn(priv->dev, "Failed to init module\n");
-			return;
-		}
-		timeout--;
-		udelay(1);
-	}
-}
-
-static inline void m_can_enable_all_interrupts(const struct m_can_priv *priv)
-{
-	/* Only interrupt line 0 is used in this driver */
-	m_can_write(priv, M_CAN_ILE, ILE_EINT0);
-}
-
-static inline void m_can_disable_all_interrupts(const struct m_can_priv *priv)
-{
-	m_can_write(priv, M_CAN_ILE, 0x0);
-}
-
-static void m_can_read_fifo(struct net_device *dev, u32 rxfs)
-{
-	struct net_device_stats *stats = &dev->stats;
-	struct m_can_priv *priv = netdev_priv(dev);
-	struct canfd_frame *cf;
-	struct sk_buff *skb;
-	u32 id, fgi, dlc;
-	int i;
-
-	/* calculate the fifo get index for where to read data */
-	fgi = (rxfs & RXFS_FGI_MASK) >> RXFS_FGI_SHIFT;
-	dlc = m_can_fifo_read(priv, fgi, M_CAN_FIFO_DLC);
-	if (dlc & RX_BUF_FDF)
-		skb = alloc_canfd_skb(dev, &cf);
-	else
-		skb = alloc_can_skb(dev, (struct can_frame **)&cf);
-	if (!skb) {
-		stats->rx_dropped++;
-		return;
-	}
-
-	if (dlc & RX_BUF_FDF)
-		cf->len = can_dlc2len((dlc >> 16) & 0x0F);
-	else
-		cf->len = get_can_dlc((dlc >> 16) & 0x0F);
-
-	id = m_can_fifo_read(priv, fgi, M_CAN_FIFO_ID);
-	if (id & RX_BUF_XTD)
-		cf->can_id = (id & CAN_EFF_MASK) | CAN_EFF_FLAG;
-	else
-		cf->can_id = (id >> 18) & CAN_SFF_MASK;
-
-	if (id & RX_BUF_ESI) {
-		cf->flags |= CANFD_ESI;
-		netdev_dbg(dev, "ESI Error\n");
-	}
-
-	if (!(dlc & RX_BUF_FDF) && (id & RX_BUF_RTR)) {
-		cf->can_id |= CAN_RTR_FLAG;
-	} else {
-		if (dlc & RX_BUF_BRS)
-			cf->flags |= CANFD_BRS;
-
-		for (i = 0; i < cf->len; i += 4)
-			*(u32 *)(cf->data + i) =
-				m_can_fifo_read(priv, fgi,
-						M_CAN_FIFO_DATA(i / 4));
-	}
-
-	/* acknowledge rx fifo 0 */
-	m_can_write(priv, M_CAN_RXF0A, fgi);
-
-	stats->rx_packets++;
-	stats->rx_bytes += cf->len;
-
-	netif_receive_skb(skb);
-}
-
-static int m_can_do_rx_poll(struct net_device *dev, int quota)
-{
-	struct m_can_priv *priv = netdev_priv(dev);
-	u32 pkts = 0;
-	u32 rxfs;
-
-	rxfs = m_can_read(priv, M_CAN_RXF0S);
-	if (!(rxfs & RXFS_FFL_MASK)) {
-		netdev_dbg(dev, "no messages in fifo0\n");
-		return 0;
-	}
-
-	while ((rxfs & RXFS_FFL_MASK) && (quota > 0)) {
-		if (rxfs & RXFS_RFL)
-			netdev_warn(dev, "Rx FIFO 0 Message Lost\n");
-
-		m_can_read_fifo(dev, rxfs);
-
-		quota--;
-		pkts++;
-		rxfs = m_can_read(priv, M_CAN_RXF0S);
-	}
-
-	if (pkts)
-		can_led_event(dev, CAN_LED_EVENT_RX);
-
-	return pkts;
-}
-
-static int m_can_handle_lost_msg(struct net_device *dev)
-{
-	struct net_device_stats *stats = &dev->stats;
-	struct sk_buff *skb;
-	struct can_frame *frame;
-
-	netdev_err(dev, "msg lost in rxf0\n");
-
-	stats->rx_errors++;
-	stats->rx_over_errors++;
-
-	skb = alloc_can_err_skb(dev, &frame);
-	if (unlikely(!skb))
-		return 0;
-
-	frame->can_id |= CAN_ERR_CRTL;
-	frame->data[1] = CAN_ERR_CRTL_RX_OVERFLOW;
-
-	netif_receive_skb(skb);
-
-	return 1;
-}
-
-static int m_can_handle_lec_err(struct net_device *dev,
-				enum m_can_lec_type lec_type)
-{
-	struct m_can_priv *priv = netdev_priv(dev);
-	struct net_device_stats *stats = &dev->stats;
-	struct can_frame *cf;
-	struct sk_buff *skb;
-
-	priv->can.can_stats.bus_error++;
-	stats->rx_errors++;
-
-	/* propagate the error condition to the CAN stack */
-	skb = alloc_can_err_skb(dev, &cf);
-	if (unlikely(!skb))
-		return 0;
-
-	/* check for 'last error code' which tells us the
-	 * type of the last error to occur on the CAN bus
-	 */
-	cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
-
-	switch (lec_type) {
-	case LEC_STUFF_ERROR:
-		netdev_dbg(dev, "stuff error\n");
-		cf->data[2] |= CAN_ERR_PROT_STUFF;
-		break;
-	case LEC_FORM_ERROR:
-		netdev_dbg(dev, "form error\n");
-		cf->data[2] |= CAN_ERR_PROT_FORM;
-		break;
-	case LEC_ACK_ERROR:
-		netdev_dbg(dev, "ack error\n");
-		cf->data[3] = CAN_ERR_PROT_LOC_ACK;
-		break;
-	case LEC_BIT1_ERROR:
-		netdev_dbg(dev, "bit1 error\n");
-		cf->data[2] |= CAN_ERR_PROT_BIT1;
-		break;
-	case LEC_BIT0_ERROR:
-		netdev_dbg(dev, "bit0 error\n");
-		cf->data[2] |= CAN_ERR_PROT_BIT0;
-		break;
-	case LEC_CRC_ERROR:
-		netdev_dbg(dev, "CRC error\n");
-		cf->data[3] = CAN_ERR_PROT_LOC_CRC_SEQ;
-		break;
-	default:
-		break;
-	}
-
-	stats->rx_packets++;
-	stats->rx_bytes += cf->can_dlc;
-	netif_receive_skb(skb);
-
-	return 1;
-}
-
-static int __m_can_get_berr_counter(const struct net_device *dev,
-				    struct can_berr_counter *bec)
-{
-	struct m_can_priv *priv = netdev_priv(dev);
-	unsigned int ecr;
-
-	ecr = m_can_read(priv, M_CAN_ECR);
-	bec->rxerr = (ecr & ECR_REC_MASK) >> ECR_REC_SHIFT;
-	bec->txerr = (ecr & ECR_TEC_MASK) >> ECR_TEC_SHIFT;
-
-	return 0;
-}
-
-static int m_can_clk_start(struct m_can_priv *priv)
-{
-	int err;
-
-	err = pm_runtime_get_sync(priv->device);
-	if (err < 0) {
-		pm_runtime_put_noidle(priv->device);
-		return err;
-	}
-
-	return 0;
-}
-
-static void m_can_clk_stop(struct m_can_priv *priv)
-{
-	pm_runtime_put_sync(priv->device);
-}
-
-static int m_can_get_berr_counter(const struct net_device *dev,
-				  struct can_berr_counter *bec)
-{
-	struct m_can_priv *priv = netdev_priv(dev);
-	int err;
-
-	err = m_can_clk_start(priv);
-	if (err)
-		return err;
-
-	__m_can_get_berr_counter(dev, bec);
-
-	m_can_clk_stop(priv);
-
-	return 0;
-}
-
-static int m_can_handle_state_change(struct net_device *dev,
-				     enum can_state new_state)
-{
-	struct m_can_priv *priv = netdev_priv(dev);
-	struct net_device_stats *stats = &dev->stats;
-	struct can_frame *cf;
-	struct sk_buff *skb;
-	struct can_berr_counter bec;
-	unsigned int ecr;
-
-	switch (new_state) {
-	case CAN_STATE_ERROR_ACTIVE:
-		/* error warning state */
-		priv->can.can_stats.error_warning++;
-		priv->can.state = CAN_STATE_ERROR_WARNING;
-		break;
-	case CAN_STATE_ERROR_PASSIVE:
-		/* error passive state */
-		priv->can.can_stats.error_passive++;
-		priv->can.state = CAN_STATE_ERROR_PASSIVE;
-		break;
-	case CAN_STATE_BUS_OFF:
-		/* bus-off state */
-		priv->can.state = CAN_STATE_BUS_OFF;
-		m_can_disable_all_interrupts(priv);
-		priv->can.can_stats.bus_off++;
-		can_bus_off(dev);
-		break;
-	default:
-		break;
-	}
-
-	/* propagate the error condition to the CAN stack */
-	skb = alloc_can_err_skb(dev, &cf);
-	if (unlikely(!skb))
-		return 0;
-
-	__m_can_get_berr_counter(dev, &bec);
-
-	switch (new_state) {
-	case CAN_STATE_ERROR_ACTIVE:
-		/* error warning state */
-		cf->can_id |= CAN_ERR_CRTL;
-		cf->data[1] = (bec.txerr > bec.rxerr) ?
-			CAN_ERR_CRTL_TX_WARNING :
-			CAN_ERR_CRTL_RX_WARNING;
-		cf->data[6] = bec.txerr;
-		cf->data[7] = bec.rxerr;
-		break;
-	case CAN_STATE_ERROR_PASSIVE:
-		/* error passive state */
-		cf->can_id |= CAN_ERR_CRTL;
-		ecr = m_can_read(priv, M_CAN_ECR);
-		if (ecr & ECR_RP)
-			cf->data[1] |= CAN_ERR_CRTL_RX_PASSIVE;
-		if (bec.txerr > 127)
-			cf->data[1] |= CAN_ERR_CRTL_TX_PASSIVE;
-		cf->data[6] = bec.txerr;
-		cf->data[7] = bec.rxerr;
-		break;
-	case CAN_STATE_BUS_OFF:
-		/* bus-off state */
-		cf->can_id |= CAN_ERR_BUSOFF;
-		break;
-	default:
-		break;
-	}
-
-	stats->rx_packets++;
-	stats->rx_bytes += cf->can_dlc;
-	netif_receive_skb(skb);
-
-	return 1;
-}
-
-static int m_can_handle_state_errors(struct net_device *dev, u32 psr)
-{
-	struct m_can_priv *priv = netdev_priv(dev);
-	int work_done = 0;
-
-	if ((psr & PSR_EW) &&
-	    (priv->can.state != CAN_STATE_ERROR_WARNING)) {
-		netdev_dbg(dev, "entered error warning state\n");
-		work_done += m_can_handle_state_change(dev,
-						       CAN_STATE_ERROR_WARNING);
-	}
-
-	if ((psr & PSR_EP) &&
-	    (priv->can.state != CAN_STATE_ERROR_PASSIVE)) {
-		netdev_dbg(dev, "entered error passive state\n");
-		work_done += m_can_handle_state_change(dev,
-						       CAN_STATE_ERROR_PASSIVE);
-	}
-
-	if ((psr & PSR_BO) &&
-	    (priv->can.state != CAN_STATE_BUS_OFF)) {
-		netdev_dbg(dev, "entered error bus off state\n");
-		work_done += m_can_handle_state_change(dev,
-						       CAN_STATE_BUS_OFF);
-	}
-
-	return work_done;
-}
-
-static void m_can_handle_other_err(struct net_device *dev, u32 irqstatus)
-{
-	if (irqstatus & IR_WDI)
-		netdev_err(dev, "Message RAM Watchdog event due to missing READY\n");
-	if (irqstatus & IR_ELO)
-		netdev_err(dev, "Error Logging Overflow\n");
-	if (irqstatus & IR_BEU)
-		netdev_err(dev, "Bit Error Uncorrected\n");
-	if (irqstatus & IR_BEC)
-		netdev_err(dev, "Bit Error Corrected\n");
-	if (irqstatus & IR_TOO)
-		netdev_err(dev, "Timeout reached\n");
-	if (irqstatus & IR_MRAF)
-		netdev_err(dev, "Message RAM access failure occurred\n");
-}
-
-static inline bool is_lec_err(u32 psr)
-{
-	psr &= LEC_UNUSED;
-
-	return psr && (psr != LEC_UNUSED);
-}
-
-static int m_can_handle_bus_errors(struct net_device *dev, u32 irqstatus,
-				   u32 psr)
-{
-	struct m_can_priv *priv = netdev_priv(dev);
-	int work_done = 0;
-
-	if (irqstatus & IR_RF0L)
-		work_done += m_can_handle_lost_msg(dev);
-
-	/* handle lec errors on the bus */
-	if ((priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING) &&
-	    is_lec_err(psr))
-		work_done += m_can_handle_lec_err(dev, psr & LEC_UNUSED);
-
-	/* other unproccessed error interrupts */
-	m_can_handle_other_err(dev, irqstatus);
-
-	return work_done;
-}
-
-static int m_can_poll(struct napi_struct *napi, int quota)
-{
-	struct net_device *dev = napi->dev;
-	struct m_can_priv *priv = netdev_priv(dev);
-	int work_done = 0;
-	u32 irqstatus, psr;
-
-	irqstatus = priv->irqstatus | m_can_read(priv, M_CAN_IR);
-	if (!irqstatus)
-		goto end;
-
-	psr = m_can_read(priv, M_CAN_PSR);
-	if (irqstatus & IR_ERR_STATE)
-		work_done += m_can_handle_state_errors(dev, psr);
-
-	if (irqstatus & IR_ERR_BUS_30X)
-		work_done += m_can_handle_bus_errors(dev, irqstatus, psr);
-
-	if (irqstatus & IR_RF0N)
-		work_done += m_can_do_rx_poll(dev, (quota - work_done));
-
-	if (work_done < quota) {
-		napi_complete_done(napi, work_done);
-		m_can_enable_all_interrupts(priv);
-	}
-
-end:
-	return work_done;
-}
-
-static void m_can_echo_tx_event(struct net_device *dev)
-{
-	u32 txe_count = 0;
-	u32 m_can_txefs;
-	u32 fgi = 0;
-	int i = 0;
-	unsigned int msg_mark;
-
-	struct m_can_priv *priv = netdev_priv(dev);
-	struct net_device_stats *stats = &dev->stats;
-
-	/* read tx event fifo status */
-	m_can_txefs = m_can_read(priv, M_CAN_TXEFS);
-
-	/* Get Tx Event fifo element count */
-	txe_count = (m_can_txefs & TXEFS_EFFL_MASK)
-			>> TXEFS_EFFL_SHIFT;
-
-	/* Get and process all sent elements */
-	for (i = 0; i < txe_count; i++) {
-		/* retrieve get index */
-		fgi = (m_can_read(priv, M_CAN_TXEFS) & TXEFS_EFGI_MASK)
-			>> TXEFS_EFGI_SHIFT;
-
-		/* get message marker */
-		msg_mark = (m_can_txe_fifo_read(priv, fgi, 4) &
-			    TX_EVENT_MM_MASK) >> TX_EVENT_MM_SHIFT;
-
-		/* ack txe element */
-		m_can_write(priv, M_CAN_TXEFA, (TXEFA_EFAI_MASK &
-						(fgi << TXEFA_EFAI_SHIFT)));
-
-		/* update stats */
-		stats->tx_bytes += can_get_echo_skb(dev, msg_mark);
-		stats->tx_packets++;
-	}
-}
-
-static irqreturn_t m_can_isr(int irq, void *dev_id)
-{
-	struct net_device *dev = (struct net_device *)dev_id;
-	struct m_can_priv *priv = netdev_priv(dev);
-	struct net_device_stats *stats = &dev->stats;
-	u32 ir;
-
-	ir = m_can_read(priv, M_CAN_IR);
-	if (!ir)
-		return IRQ_NONE;
-
-	/* ACK all irqs */
-	if (ir & IR_ALL_INT)
-		m_can_write(priv, M_CAN_IR, ir);
-
-	/* schedule NAPI in case of
-	 * - rx IRQ
-	 * - state change IRQ
-	 * - bus error IRQ and bus error reporting
-	 */
-	if ((ir & IR_RF0N) || (ir & IR_ERR_ALL_30X)) {
-		priv->irqstatus = ir;
-		m_can_disable_all_interrupts(priv);
-		napi_schedule(&priv->napi);
-	}
-
-	if (priv->version == 30) {
-		if (ir & IR_TC) {
-			/* Transmission Complete Interrupt*/
-			stats->tx_bytes += can_get_echo_skb(dev, 0);
-			stats->tx_packets++;
-			can_led_event(dev, CAN_LED_EVENT_TX);
-			netif_wake_queue(dev);
-		}
-	} else  {
-		if (ir & IR_TEFN) {
-			/* New TX FIFO Element arrived */
-			m_can_echo_tx_event(dev);
-			can_led_event(dev, CAN_LED_EVENT_TX);
-			if (netif_queue_stopped(dev) &&
-			    !m_can_tx_fifo_full(priv))
-				netif_wake_queue(dev);
-		}
-	}
-
-	return IRQ_HANDLED;
-}
-
-static const struct can_bittiming_const m_can_bittiming_const_30X = {
-	.name = KBUILD_MODNAME,
-	.tseg1_min = 2,		/* Time segment 1 = prop_seg + phase_seg1 */
-	.tseg1_max = 64,
-	.tseg2_min = 1,		/* Time segment 2 = phase_seg2 */
-	.tseg2_max = 16,
-	.sjw_max = 16,
-	.brp_min = 1,
-	.brp_max = 1024,
-	.brp_inc = 1,
-};
-
-static const struct can_bittiming_const m_can_data_bittiming_const_30X = {
-	.name = KBUILD_MODNAME,
-	.tseg1_min = 2,		/* Time segment 1 = prop_seg + phase_seg1 */
-	.tseg1_max = 16,
-	.tseg2_min = 1,		/* Time segment 2 = phase_seg2 */
-	.tseg2_max = 8,
-	.sjw_max = 4,
-	.brp_min = 1,
-	.brp_max = 32,
-	.brp_inc = 1,
-};
-
-static const struct can_bittiming_const m_can_bittiming_const_31X = {
-	.name = KBUILD_MODNAME,
-	.tseg1_min = 2,		/* Time segment 1 = prop_seg + phase_seg1 */
-	.tseg1_max = 256,
-	.tseg2_min = 1,		/* Time segment 2 = phase_seg2 */
-	.tseg2_max = 128,
-	.sjw_max = 128,
-	.brp_min = 1,
-	.brp_max = 512,
-	.brp_inc = 1,
-};
-
-static const struct can_bittiming_const m_can_data_bittiming_const_31X = {
-	.name = KBUILD_MODNAME,
-	.tseg1_min = 1,		/* Time segment 1 = prop_seg + phase_seg1 */
-	.tseg1_max = 32,
-	.tseg2_min = 1,		/* Time segment 2 = phase_seg2 */
-	.tseg2_max = 16,
-	.sjw_max = 16,
-	.brp_min = 1,
-	.brp_max = 32,
-	.brp_inc = 1,
-};
-
-static int m_can_set_bittiming(struct net_device *dev)
-{
-	struct m_can_priv *priv = netdev_priv(dev);
-	const struct can_bittiming *bt = &priv->can.bittiming;
-	const struct can_bittiming *dbt = &priv->can.data_bittiming;
-	u16 brp, sjw, tseg1, tseg2;
-	u32 reg_btp;
-
-	brp = bt->brp - 1;
-	sjw = bt->sjw - 1;
-	tseg1 = bt->prop_seg + bt->phase_seg1 - 1;
-	tseg2 = bt->phase_seg2 - 1;
-	reg_btp = (brp << NBTP_NBRP_SHIFT) | (sjw << NBTP_NSJW_SHIFT) |
-		(tseg1 << NBTP_NTSEG1_SHIFT) | (tseg2 << NBTP_NTSEG2_SHIFT);
-	m_can_write(priv, M_CAN_NBTP, reg_btp);
-
-	if (priv->can.ctrlmode & CAN_CTRLMODE_FD) {
-		reg_btp = 0;
-		brp = dbt->brp - 1;
-		sjw = dbt->sjw - 1;
-		tseg1 = dbt->prop_seg + dbt->phase_seg1 - 1;
-		tseg2 = dbt->phase_seg2 - 1;
-
-		/* TDC is only needed for bitrates beyond 2.5 MBit/s.
-		 * This is mentioned in the "Bit Time Requirements for CAN FD"
-		 * paper presented at the International CAN Conference 2013
-		 */
-		if (dbt->bitrate > 2500000) {
-			u32 tdco, ssp;
-
-			/* Use the same value of secondary sampling point
-			 * as the data sampling point
-			 */
-			ssp = dbt->sample_point;
-
-			/* Equation based on Bosch's M_CAN User Manual's
-			 * Transmitter Delay Compensation Section
-			 */
-			tdco = (priv->can.clock.freq / 1000) *
-			       ssp / dbt->bitrate;
-
-			/* Max valid TDCO value is 127 */
-			if (tdco > 127) {
-				netdev_warn(dev, "TDCO value of %u is beyond maximum. Using maximum possible value\n",
-					    tdco);
-				tdco = 127;
-			}
-
-			reg_btp |= DBTP_TDC;
-			m_can_write(priv, M_CAN_TDCR,
-				    tdco << TDCR_TDCO_SHIFT);
-		}
-
-		reg_btp |= (brp << DBTP_DBRP_SHIFT) |
-			   (sjw << DBTP_DSJW_SHIFT) |
-			   (tseg1 << DBTP_DTSEG1_SHIFT) |
-			   (tseg2 << DBTP_DTSEG2_SHIFT);
-
-		m_can_write(priv, M_CAN_DBTP, reg_btp);
-	}
-
-	return 0;
-}
-
-/* Configure M_CAN chip:
- * - set rx buffer/fifo element size
- * - configure rx fifo
- * - accept non-matching frame into fifo 0
- * - configure tx buffer
- *		- >= v3.1.x: TX FIFO is used
- * - configure mode
- * - setup bittiming
- */
-static void m_can_chip_config(struct net_device *dev)
-{
-	struct m_can_priv *priv = netdev_priv(dev);
-	u32 cccr, test;
-
-	m_can_config_endisable(priv, true);
-
-	/* RX Buffer/FIFO Element Size 64 bytes data field */
-	m_can_write(priv, M_CAN_RXESC, M_CAN_RXESC_64BYTES);
-
-	/* Accept Non-matching Frames Into FIFO 0 */
-	m_can_write(priv, M_CAN_GFC, 0x0);
-
-	if (priv->version == 30) {
-		/* only support one Tx Buffer currently */
-		m_can_write(priv, M_CAN_TXBC, (1 << TXBC_NDTB_SHIFT) |
-				priv->mcfg[MRAM_TXB].off);
-	} else {
-		/* TX FIFO is used for newer IP Core versions */
-		m_can_write(priv, M_CAN_TXBC,
-			    (priv->mcfg[MRAM_TXB].num << TXBC_TFQS_SHIFT) |
-			    (priv->mcfg[MRAM_TXB].off));
-	}
-
-	/* support 64 bytes payload */
-	m_can_write(priv, M_CAN_TXESC, TXESC_TBDS_64BYTES);
-
-	/* TX Event FIFO */
-	if (priv->version == 30) {
-		m_can_write(priv, M_CAN_TXEFC, (1 << TXEFC_EFS_SHIFT) |
-				priv->mcfg[MRAM_TXE].off);
-	} else {
-		/* Full TX Event FIFO is used */
-		m_can_write(priv, M_CAN_TXEFC,
-			    ((priv->mcfg[MRAM_TXE].num << TXEFC_EFS_SHIFT)
-			     & TXEFC_EFS_MASK) |
-			    priv->mcfg[MRAM_TXE].off);
-	}
-
-	/* rx fifo configuration, blocking mode, fifo size 1 */
-	m_can_write(priv, M_CAN_RXF0C,
-		    (priv->mcfg[MRAM_RXF0].num << RXFC_FS_SHIFT) |
-		     priv->mcfg[MRAM_RXF0].off);
-
-	m_can_write(priv, M_CAN_RXF1C,
-		    (priv->mcfg[MRAM_RXF1].num << RXFC_FS_SHIFT) |
-		     priv->mcfg[MRAM_RXF1].off);
-
-	cccr = m_can_read(priv, M_CAN_CCCR);
-	test = m_can_read(priv, M_CAN_TEST);
-	test &= ~TEST_LBCK;
-	if (priv->version == 30) {
-	/* Version 3.0.x */
-
-		cccr &= ~(CCCR_TEST | CCCR_MON |
-			(CCCR_CMR_MASK << CCCR_CMR_SHIFT) |
-			(CCCR_CME_MASK << CCCR_CME_SHIFT));
-
-		if (priv->can.ctrlmode & CAN_CTRLMODE_FD)
-			cccr |= CCCR_CME_CANFD_BRS << CCCR_CME_SHIFT;
-
-	} else {
-	/* Version 3.1.x or 3.2.x */
-		cccr &= ~(CCCR_TEST | CCCR_MON | CCCR_BRSE | CCCR_FDOE |
-			  CCCR_NISO);
-
-		/* Only 3.2.x has NISO Bit implemented */
-		if (priv->can.ctrlmode & CAN_CTRLMODE_FD_NON_ISO)
-			cccr |= CCCR_NISO;
-
-		if (priv->can.ctrlmode & CAN_CTRLMODE_FD)
-			cccr |= (CCCR_BRSE | CCCR_FDOE);
-	}
-
-	/* Loopback Mode */
-	if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK) {
-		cccr |= CCCR_TEST | CCCR_MON;
-		test |= TEST_LBCK;
-	}
-
-	/* Enable Monitoring (all versions) */
-	if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY)
-		cccr |= CCCR_MON;
-
-	/* Write config */
-	m_can_write(priv, M_CAN_CCCR, cccr);
-	m_can_write(priv, M_CAN_TEST, test);
-
-	/* Enable interrupts */
-	m_can_write(priv, M_CAN_IR, IR_ALL_INT);
-	if (!(priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING))
-		if (priv->version == 30)
-			m_can_write(priv, M_CAN_IE, IR_ALL_INT &
-				    ~(IR_ERR_LEC_30X));
-		else
-			m_can_write(priv, M_CAN_IE, IR_ALL_INT &
-				    ~(IR_ERR_LEC_31X));
-	else
-		m_can_write(priv, M_CAN_IE, IR_ALL_INT);
-
-	/* route all interrupts to INT0 */
-	m_can_write(priv, M_CAN_ILS, ILS_ALL_INT0);
-
-	/* set bittiming params */
-	m_can_set_bittiming(dev);
-
-	m_can_config_endisable(priv, false);
-}
-
-static void m_can_start(struct net_device *dev)
-{
-	struct m_can_priv *priv = netdev_priv(dev);
-
-	/* basic m_can configuration */
-	m_can_chip_config(dev);
-
-	priv->can.state = CAN_STATE_ERROR_ACTIVE;
-
-	m_can_enable_all_interrupts(priv);
-}
-
-static int m_can_set_mode(struct net_device *dev, enum can_mode mode)
-{
-	switch (mode) {
-	case CAN_MODE_START:
-		m_can_start(dev);
-		netif_wake_queue(dev);
-		break;
-	default:
-		return -EOPNOTSUPP;
-	}
-
-	return 0;
-}
-
-/* Checks core release number of M_CAN
- * returns 0 if an unsupported device is detected
- * else it returns the release and step coded as:
- * return value = 10 * <release> + 1 * <step>
- */
-static int m_can_check_core_release(void __iomem *m_can_base)
-{
-	u32 crel_reg;
-	u8 rel;
-	u8 step;
-	int res;
-	struct m_can_priv temp_priv = {
-		.base = m_can_base
-	};
-
-	/* Read Core Release Version and split into version number
-	 * Example: Version 3.2.1 => rel = 3; step = 2; substep = 1;
-	 */
-	crel_reg = m_can_read(&temp_priv, M_CAN_CREL);
-	rel = (u8)((crel_reg & CREL_REL_MASK) >> CREL_REL_SHIFT);
-	step = (u8)((crel_reg & CREL_STEP_MASK) >> CREL_STEP_SHIFT);
-
-	if (rel == 3) {
-		/* M_CAN v3.x.y: create return value */
-		res = 30 + step;
-	} else {
-		/* Unsupported M_CAN version */
-		res = 0;
-	}
-
-	return res;
-}
-
-/* Selectable Non ISO support only in version 3.2.x
- * This function checks if the bit is writable.
- */
-static bool m_can_niso_supported(const struct m_can_priv *priv)
-{
-	u32 cccr_reg, cccr_poll;
-	int niso_timeout;
-
-	m_can_config_endisable(priv, true);
-	cccr_reg = m_can_read(priv, M_CAN_CCCR);
-	cccr_reg |= CCCR_NISO;
-	m_can_write(priv, M_CAN_CCCR, cccr_reg);
-
-	niso_timeout = readl_poll_timeout((priv->base + M_CAN_CCCR), cccr_poll,
-					  (cccr_poll == cccr_reg), 0, 10);
-
-	/* Clear NISO */
-	cccr_reg &= ~(CCCR_NISO);
-	m_can_write(priv, M_CAN_CCCR, cccr_reg);
-
-	m_can_config_endisable(priv, false);
-
-	/* return false if time out (-ETIMEDOUT), else return true */
-	return !niso_timeout;
-}
-
-static int m_can_dev_setup(struct platform_device *pdev, struct net_device *dev,
-			   void __iomem *addr)
-{
-	struct m_can_priv *priv;
-	int m_can_version;
-
-	m_can_version = m_can_check_core_release(addr);
-	/* return if unsupported version */
-	if (!m_can_version) {
-		dev_err(&pdev->dev, "Unsupported version number: %2d",
-			m_can_version);
-		return -EINVAL;
-	}
-
-	priv = netdev_priv(dev);
-	netif_napi_add(dev, &priv->napi, m_can_poll, M_CAN_NAPI_WEIGHT);
-
-	/* Shared properties of all M_CAN versions */
-	priv->version = m_can_version;
-	priv->dev = dev;
-	priv->base = addr;
-	priv->can.do_set_mode = m_can_set_mode;
-	priv->can.do_get_berr_counter = m_can_get_berr_counter;
-
-	/* Set M_CAN supported operations */
-	priv->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK |
-					CAN_CTRLMODE_LISTENONLY |
-					CAN_CTRLMODE_BERR_REPORTING |
-					CAN_CTRLMODE_FD;
-
-	/* Set properties depending on M_CAN version */
-	switch (priv->version) {
-	case 30:
-		/* CAN_CTRLMODE_FD_NON_ISO is fixed with M_CAN IP v3.0.x */
-		can_set_static_ctrlmode(dev, CAN_CTRLMODE_FD_NON_ISO);
-		priv->can.bittiming_const = &m_can_bittiming_const_30X;
-		priv->can.data_bittiming_const =
-				&m_can_data_bittiming_const_30X;
-		break;
-	case 31:
-		/* CAN_CTRLMODE_FD_NON_ISO is fixed with M_CAN IP v3.1.x */
-		can_set_static_ctrlmode(dev, CAN_CTRLMODE_FD_NON_ISO);
-		priv->can.bittiming_const = &m_can_bittiming_const_31X;
-		priv->can.data_bittiming_const =
-				&m_can_data_bittiming_const_31X;
-		break;
-	case 32:
-		priv->can.bittiming_const = &m_can_bittiming_const_31X;
-		priv->can.data_bittiming_const =
-				&m_can_data_bittiming_const_31X;
-		priv->can.ctrlmode_supported |= (m_can_niso_supported(priv)
-						? CAN_CTRLMODE_FD_NON_ISO
-						: 0);
-		break;
-	default:
-		dev_err(&pdev->dev, "Unsupported version number: %2d",
-			priv->version);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int m_can_open(struct net_device *dev)
-{
-	struct m_can_priv *priv = netdev_priv(dev);
-	int err;
-
-	err = m_can_clk_start(priv);
-	if (err)
-		return err;
-
-	/* open the can device */
-	err = open_candev(dev);
-	if (err) {
-		netdev_err(dev, "failed to open can device\n");
-		goto exit_disable_clks;
-	}
-
-	/* register interrupt handler */
-	err = request_irq(dev->irq, m_can_isr, IRQF_SHARED, dev->name,
-			  dev);
-	if (err < 0) {
-		netdev_err(dev, "failed to request interrupt\n");
-		goto exit_irq_fail;
-	}
-
-	/* start the m_can controller */
-	m_can_start(dev);
-
-	can_led_event(dev, CAN_LED_EVENT_OPEN);
-	napi_enable(&priv->napi);
-	netif_start_queue(dev);
-
-	return 0;
-
-exit_irq_fail:
-	close_candev(dev);
-exit_disable_clks:
-	m_can_clk_stop(priv);
-	return err;
-}
-
-static void m_can_stop(struct net_device *dev)
-{
-	struct m_can_priv *priv = netdev_priv(dev);
-
-	/* disable all interrupts */
-	m_can_disable_all_interrupts(priv);
-
-	/* set the state as STOPPED */
-	priv->can.state = CAN_STATE_STOPPED;
-}
-
-static int m_can_close(struct net_device *dev)
-{
-	struct m_can_priv *priv = netdev_priv(dev);
-
-	netif_stop_queue(dev);
-	napi_disable(&priv->napi);
-	m_can_stop(dev);
-	m_can_clk_stop(priv);
-	free_irq(dev->irq, dev);
-	close_candev(dev);
-	can_led_event(dev, CAN_LED_EVENT_STOP);
-
-	return 0;
-}
-
-static int m_can_next_echo_skb_occupied(struct net_device *dev, int putidx)
-{
-	struct m_can_priv *priv = netdev_priv(dev);
-	/*get wrap around for loopback skb index */
-	unsigned int wrap = priv->can.echo_skb_max;
-	int next_idx;
-
-	/* calculate next index */
-	next_idx = (++putidx >= wrap ? 0 : putidx);
-
-	/* check if occupied */
-	return !!priv->can.echo_skb[next_idx];
-}
-
-static netdev_tx_t m_can_start_xmit(struct sk_buff *skb,
-				    struct net_device *dev)
-{
-	struct m_can_priv *priv = netdev_priv(dev);
-	struct canfd_frame *cf = (struct canfd_frame *)skb->data;
-	u32 id, cccr, fdflags;
-	int i;
-	int putidx;
-
-	if (can_dropped_invalid_skb(dev, skb))
-		return NETDEV_TX_OK;
-
-	/* Generate ID field for TX buffer Element */
-	/* Common to all supported M_CAN versions */
-	if (cf->can_id & CAN_EFF_FLAG) {
-		id = cf->can_id & CAN_EFF_MASK;
-		id |= TX_BUF_XTD;
-	} else {
-		id = ((cf->can_id & CAN_SFF_MASK) << 18);
-	}
-
-	if (cf->can_id & CAN_RTR_FLAG)
-		id |= TX_BUF_RTR;
-
-	if (priv->version == 30) {
-		netif_stop_queue(dev);
-
-		/* message ram configuration */
-		m_can_fifo_write(priv, 0, M_CAN_FIFO_ID, id);
-		m_can_fifo_write(priv, 0, M_CAN_FIFO_DLC,
-				 can_len2dlc(cf->len) << 16);
-
-		for (i = 0; i < cf->len; i += 4)
-			m_can_fifo_write(priv, 0,
-					 M_CAN_FIFO_DATA(i / 4),
-					 *(u32 *)(cf->data + i));
-
-		can_put_echo_skb(skb, dev, 0);
-
-		if (priv->can.ctrlmode & CAN_CTRLMODE_FD) {
-			cccr = m_can_read(priv, M_CAN_CCCR);
-			cccr &= ~(CCCR_CMR_MASK << CCCR_CMR_SHIFT);
-			if (can_is_canfd_skb(skb)) {
-				if (cf->flags & CANFD_BRS)
-					cccr |= CCCR_CMR_CANFD_BRS <<
-						CCCR_CMR_SHIFT;
-				else
-					cccr |= CCCR_CMR_CANFD <<
-						CCCR_CMR_SHIFT;
-			} else {
-				cccr |= CCCR_CMR_CAN << CCCR_CMR_SHIFT;
-			}
-			m_can_write(priv, M_CAN_CCCR, cccr);
-		}
-		m_can_write(priv, M_CAN_TXBTIE, 0x1);
-		m_can_write(priv, M_CAN_TXBAR, 0x1);
-		/* End of xmit function for version 3.0.x */
-	} else {
-		/* Transmit routine for version >= v3.1.x */
-
-		/* Check if FIFO full */
-		if (m_can_tx_fifo_full(priv)) {
-			/* This shouldn't happen */
-			netif_stop_queue(dev);
-			netdev_warn(dev,
-				    "TX queue active although FIFO is full.");
-			return NETDEV_TX_BUSY;
-		}
-
-		/* get put index for frame */
-		putidx = ((m_can_read(priv, M_CAN_TXFQS) & TXFQS_TFQPI_MASK)
-				  >> TXFQS_TFQPI_SHIFT);
-		/* Write ID Field to FIFO Element */
-		m_can_fifo_write(priv, putidx, M_CAN_FIFO_ID, id);
-
-		/* get CAN FD configuration of frame */
-		fdflags = 0;
-		if (can_is_canfd_skb(skb)) {
-			fdflags |= TX_BUF_FDF;
-			if (cf->flags & CANFD_BRS)
-				fdflags |= TX_BUF_BRS;
-		}
-
-		/* Construct DLC Field. Also contains CAN-FD configuration
-		 * use put index of fifo as message marker
-		 * it is used in TX interrupt for
-		 * sending the correct echo frame
-		 */
-		m_can_fifo_write(priv, putidx, M_CAN_FIFO_DLC,
-				 ((putidx << TX_BUF_MM_SHIFT) &
-				  TX_BUF_MM_MASK) |
-				 (can_len2dlc(cf->len) << 16) |
-				 fdflags | TX_BUF_EFC);
-
-		for (i = 0; i < cf->len; i += 4)
-			m_can_fifo_write(priv, putidx, M_CAN_FIFO_DATA(i / 4),
-					 *(u32 *)(cf->data + i));
-
-		/* Push loopback echo.
-		 * Will be looped back on TX interrupt based on message marker
-		 */
-		can_put_echo_skb(skb, dev, putidx);
-
-		/* Enable TX FIFO element to start transfer  */
-		m_can_write(priv, M_CAN_TXBAR, (1 << putidx));
-
-		/* stop network queue if fifo full */
-			if (m_can_tx_fifo_full(priv) ||
-			    m_can_next_echo_skb_occupied(dev, putidx))
-				netif_stop_queue(dev);
-	}
-
-	return NETDEV_TX_OK;
-}
-
-static const struct net_device_ops m_can_netdev_ops = {
-	.ndo_open = m_can_open,
-	.ndo_stop = m_can_close,
-	.ndo_start_xmit = m_can_start_xmit,
-	.ndo_change_mtu = can_change_mtu,
-};
-
-static int register_m_can_dev(struct net_device *dev)
-{
-	dev->flags |= IFF_ECHO;	/* we support local echo */
-	dev->netdev_ops = &m_can_netdev_ops;
-
-	return register_candev(dev);
-}
-
-static void m_can_init_ram(struct m_can_priv *priv)
-{
-	int end, i, start;
-
-	/* initialize the entire Message RAM in use to avoid possible
-	 * ECC/parity checksum errors when reading an uninitialized buffer
-	 */
-	start = priv->mcfg[MRAM_SIDF].off;
-	end = priv->mcfg[MRAM_TXB].off +
-		priv->mcfg[MRAM_TXB].num * TXB_ELEMENT_SIZE;
-	for (i = start; i < end; i += 4)
-		writel(0x0, priv->mram_base + i);
-}
-
-static void m_can_of_parse_mram(struct m_can_priv *priv,
-				const u32 *mram_config_vals)
-{
-	priv->mcfg[MRAM_SIDF].off = mram_config_vals[0];
-	priv->mcfg[MRAM_SIDF].num = mram_config_vals[1];
-	priv->mcfg[MRAM_XIDF].off = priv->mcfg[MRAM_SIDF].off +
-			priv->mcfg[MRAM_SIDF].num * SIDF_ELEMENT_SIZE;
-	priv->mcfg[MRAM_XIDF].num = mram_config_vals[2];
-	priv->mcfg[MRAM_RXF0].off = priv->mcfg[MRAM_XIDF].off +
-			priv->mcfg[MRAM_XIDF].num * XIDF_ELEMENT_SIZE;
-	priv->mcfg[MRAM_RXF0].num = mram_config_vals[3] &
-			(RXFC_FS_MASK >> RXFC_FS_SHIFT);
-	priv->mcfg[MRAM_RXF1].off = priv->mcfg[MRAM_RXF0].off +
-			priv->mcfg[MRAM_RXF0].num * RXF0_ELEMENT_SIZE;
-	priv->mcfg[MRAM_RXF1].num = mram_config_vals[4] &
-			(RXFC_FS_MASK >> RXFC_FS_SHIFT);
-	priv->mcfg[MRAM_RXB].off = priv->mcfg[MRAM_RXF1].off +
-			priv->mcfg[MRAM_RXF1].num * RXF1_ELEMENT_SIZE;
-	priv->mcfg[MRAM_RXB].num = mram_config_vals[5];
-	priv->mcfg[MRAM_TXE].off = priv->mcfg[MRAM_RXB].off +
-			priv->mcfg[MRAM_RXB].num * RXB_ELEMENT_SIZE;
-	priv->mcfg[MRAM_TXE].num = mram_config_vals[6];
-	priv->mcfg[MRAM_TXB].off = priv->mcfg[MRAM_TXE].off +
-			priv->mcfg[MRAM_TXE].num * TXE_ELEMENT_SIZE;
-	priv->mcfg[MRAM_TXB].num = mram_config_vals[7] &
-			(TXBC_NDTB_MASK >> TXBC_NDTB_SHIFT);
-
-	dev_dbg(priv->device,
-		"mram_base %p sidf 0x%x %d xidf 0x%x %d rxf0 0x%x %d rxf1 0x%x %d rxb 0x%x %d txe 0x%x %d txb 0x%x %d\n",
-		priv->mram_base,
-		priv->mcfg[MRAM_SIDF].off, priv->mcfg[MRAM_SIDF].num,
-		priv->mcfg[MRAM_XIDF].off, priv->mcfg[MRAM_XIDF].num,
-		priv->mcfg[MRAM_RXF0].off, priv->mcfg[MRAM_RXF0].num,
-		priv->mcfg[MRAM_RXF1].off, priv->mcfg[MRAM_RXF1].num,
-		priv->mcfg[MRAM_RXB].off, priv->mcfg[MRAM_RXB].num,
-		priv->mcfg[MRAM_TXE].off, priv->mcfg[MRAM_TXE].num,
-		priv->mcfg[MRAM_TXB].off, priv->mcfg[MRAM_TXB].num);
-
-	m_can_init_ram(priv);
-}
+#include "m_can_core.h"
 
 static int m_can_plat_probe(struct platform_device *pdev)
 {
+	struct m_can_classdev *mcan_class;
 	struct net_device *dev;
 	struct m_can_priv *priv;
 	struct resource *res;
 	void __iomem *addr;
 	void __iomem *mram_addr;
-	struct clk *hclk, *cclk;
-	int irq, ret;
-	struct device_node *np;
-	u32 mram_config_vals[MRAM_CFG_LEN];
-	u32 tx_fifo_size;
-
-	np = pdev->dev.of_node;
+	int irq, ret = 0;
 
-	hclk = devm_clk_get(&pdev->dev, "hclk");
-	cclk = devm_clk_get(&pdev->dev, "cclk");
-
-	if (IS_ERR(hclk) || IS_ERR(cclk)) {
-		dev_err(&pdev->dev, "no clock found\n");
-		ret = -ENODEV;
-		goto failed_ret;
-	}
+	mcan_class = m_can_core_allocate_dev(&pdev->dev);
+	m_can_core_get_clocks(mcan_class);
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "m_can");
 	addr = devm_ioremap_resource(&pdev->dev, res);
 	irq = platform_get_irq_byname(pdev, "int0");
-
 	if (IS_ERR(addr) || irq < 0) {
 		ret = -EINVAL;
 		goto failed_ret;
@@ -1616,122 +60,35 @@  static int m_can_plat_probe(struct platform_device *pdev)
 		goto failed_ret;
 	}
 
-	/* get message ram configuration */
-	ret = of_property_read_u32_array(np, "bosch,mram-cfg",
-					 mram_config_vals,
-					 sizeof(mram_config_vals) / 4);
-	if (ret) {
-		dev_err(&pdev->dev, "Could not get Message RAM configuration.");
-		goto failed_ret;
-	}
-
-	/* Get TX FIFO size
-	 * Defines the total amount of echo buffers for loopback
-	 */
-	tx_fifo_size = mram_config_vals[7];
-
-	/* allocate the m_can device */
-	dev = alloc_candev(sizeof(*priv), tx_fifo_size);
-	if (!dev) {
-		ret = -ENOMEM;
-		goto failed_ret;
-	}
-
-	priv = netdev_priv(dev);
-	dev->irq = irq;
-	priv->device = &pdev->dev;
-	priv->hclk = hclk;
-	priv->cclk = cclk;
-	priv->can.clock.freq = clk_get_rate(cclk);
-	priv->mram_base = mram_addr;
-
-	platform_set_drvdata(pdev, dev);
-	SET_NETDEV_DEV(dev, &pdev->dev);
-
-	/* Enable clocks. Necessary to read Core Release in order to determine
-	 * M_CAN version
-	 */
-	pm_runtime_enable(&pdev->dev);
-	ret = m_can_clk_start(priv);
-	if (ret)
-		goto pm_runtime_fail;
-
-	ret = m_can_dev_setup(pdev, dev, addr);
-	if (ret)
-		goto clk_disable;
-
-	ret = register_m_can_dev(dev);
-	if (ret) {
-		dev_err(&pdev->dev, "registering %s failed (err=%d)\n",
-			KBUILD_MODNAME, ret);
-		goto clk_disable;
-	}
+	mcan_class->net->irq = irq;
+	mcan_class->pm_clock_support = 1;
+	mcan_class->mram_base = mram_addr;
+	mcan_class->can.clock.freq = clk_get_rate(mcan_class->cclk);
+	mcan_class->dev = &pdev->dev;
 
-	m_can_of_parse_mram(priv, mram_config_vals);
+	platform_set_drvdata(pdev, mcan_class->dev);
 
-	devm_can_led_init(dev);
+	m_can_init_ram(mcan_class);
 
-	of_can_transceiver(dev);
+	m_can_core_register(mcan_class);
 
-	dev_info(&pdev->dev, "%s device registered (irq=%d, version=%d)\n",
-		 KBUILD_MODNAME, dev->irq, priv->version);
-
-	/* Probe finished
-	 * Stop clocks. They will be reactivated once the M_CAN device is opened
-	 */
-clk_disable:
-	m_can_clk_stop(priv);
-pm_runtime_fail:
+failed_ret:
+/*	m_can_clk_stop(mcan_class);*/
 	if (ret) {
 		pm_runtime_disable(&pdev->dev);
-		free_candev(dev);
+		free_candev(mcan_class->net);
 	}
-failed_ret:
 	return ret;
 }
 
 static __maybe_unused int m_can_suspend(struct device *dev)
 {
-	struct net_device *ndev = dev_get_drvdata(dev);
-	struct m_can_priv *priv = netdev_priv(ndev);
-
-	if (netif_running(ndev)) {
-		netif_stop_queue(ndev);
-		netif_device_detach(ndev);
-		m_can_stop(ndev);
-		m_can_clk_stop(priv);
-	}
-
-	pinctrl_pm_select_sleep_state(dev);
-
-	priv->can.state = CAN_STATE_SLEEPING;
-
-	return 0;
+	return m_can_core_suspend(dev);
 }
 
 static __maybe_unused int m_can_resume(struct device *dev)
 {
-	struct net_device *ndev = dev_get_drvdata(dev);
-	struct m_can_priv *priv = netdev_priv(ndev);
-
-	pinctrl_pm_select_default_state(dev);
-
-	priv->can.state = CAN_STATE_ERROR_ACTIVE;
-
-	if (netif_running(ndev)) {
-		int ret;
-
-		ret = m_can_clk_start(priv);
-		if (ret)
-			return ret;
-
-		m_can_init_ram(priv);
-		m_can_start(ndev);
-		netif_device_attach(ndev);
-		netif_start_queue(ndev);
-	}
-
-	return 0;
+	return m_can_core_resume(dev);
 }
 
 static void unregister_m_can_dev(struct net_device *dev)
@@ -1757,7 +114,7 @@  static int m_can_plat_remove(struct platform_device *pdev)
 static int __maybe_unused m_can_runtime_suspend(struct device *dev)
 {
 	struct net_device *ndev = dev_get_drvdata(dev);
-	struct m_can_priv *priv = netdev_priv(ndev);
+	struct m_can_classdev *priv = netdev_priv(ndev);
 
 	clk_disable_unprepare(priv->cclk);
 	clk_disable_unprepare(priv->hclk);
@@ -1768,7 +125,7 @@  static int __maybe_unused m_can_runtime_suspend(struct device *dev)
 static int __maybe_unused m_can_runtime_resume(struct device *dev)
 {
 	struct net_device *ndev = dev_get_drvdata(dev);
-	struct m_can_priv *priv = netdev_priv(ndev);
+	struct m_can_classdev *priv = netdev_priv(ndev);
 	int err;
 
 	err = clk_prepare_enable(priv->hclk);
diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can_core.c
similarity index 83%
copy from drivers/net/can/m_can/m_can.c
copy to drivers/net/can/m_can/m_can_core.c
index 9b449400376b..5af5d259180e 100644
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can_core.c
@@ -28,6 +28,8 @@ 
 #include <linux/can/dev.h>
 #include <linux/pinctrl/consumer.h>
 
+#include "m_can_core.h"
+
 /* napi related */
 #define M_CAN_NAPI_WEIGHT	64
 
@@ -86,28 +88,6 @@  enum m_can_reg {
 	M_CAN_TXEFA	= 0xf8,
 };
 
-/* m_can lec values */
-enum m_can_lec_type {
-	LEC_NO_ERROR = 0,
-	LEC_STUFF_ERROR,
-	LEC_FORM_ERROR,
-	LEC_ACK_ERROR,
-	LEC_BIT1_ERROR,
-	LEC_BIT0_ERROR,
-	LEC_CRC_ERROR,
-	LEC_UNUSED,
-};
-
-enum m_can_mram_cfg {
-	MRAM_SIDF = 0,
-	MRAM_XIDF,
-	MRAM_RXF0,
-	MRAM_RXF1,
-	MRAM_RXB,
-	MRAM_TXE,
-	MRAM_TXB,
-	MRAM_CFG_NUM,
-};
 
 /* Core Release Register (CREL) */
 #define CREL_REL_SHIFT		28
@@ -347,68 +327,100 @@  enum m_can_mram_cfg {
 #define TX_EVENT_MM_SHIFT	TX_BUF_MM_SHIFT
 #define TX_EVENT_MM_MASK	(0xff << TX_EVENT_MM_SHIFT)
 
-/* address offset and element number for each FIFO/Buffer in the Message RAM */
-struct mram_cfg {
-	u16 off;
-	u8  num;
-};
+static inline u32 m_can_read(const struct m_can_classdev *priv, enum m_can_reg reg)
+{
+	u32 ret;
 
-/* m_can private data structure */
-struct m_can_priv {
-	struct can_priv can;	/* must be the first member */
-	struct napi_struct napi;
-	struct net_device *dev;
-	struct device *device;
-	struct clk *hclk;
-	struct clk *cclk;
-	void __iomem *base;
-	u32 irqstatus;
-	int version;
-
-	/* message ram configuration */
-	void __iomem *mram_base;
-	struct mram_cfg mcfg[MRAM_CFG_NUM];
-};
+	if (priv->m_can_write)
+		ret = priv->m_can_read(priv, priv->reg_offset + reg);
+	else
+		ret = readl(priv->base + reg);
 
-static inline u32 m_can_read(const struct m_can_priv *priv, enum m_can_reg reg)
-{
-	return readl(priv->base + reg);
+	return ret;
 }
 
-static inline void m_can_write(const struct m_can_priv *priv,
+static inline int m_can_write(const struct m_can_classdev *priv,
 			       enum m_can_reg reg, u32 val)
 {
-	writel(val, priv->base + reg);
+	int ret = 0;
+
+	if (priv->m_can_write)
+		ret = priv->m_can_write(priv, priv->reg_offset + reg, val);
+	else
+		writel(val, priv->base + reg);
+
+	return ret;
 }
 
-static inline u32 m_can_fifo_read(const struct m_can_priv *priv,
+static inline u32 m_can_fifo_read(const struct m_can_classdev *priv,
 				  u32 fgi, unsigned int offset)
 {
-	return readl(priv->mram_base + priv->mcfg[MRAM_RXF0].off +
-		     fgi * RXF0_ELEMENT_SIZE + offset);
+	u32 addr_offset = priv->mcfg[MRAM_RXF0].off + fgi * RXF0_ELEMENT_SIZE + offset;
+	u32 read_fifo_addr; /* need to take into account iomem cases */
+	u32 ret = 0;
+
+	if (priv->mram_start)
+		read_fifo_addr = priv->mram_start + addr_offset;
+	else
+		read_fifo_addr = priv->mram_base + addr_offset;
+
+	if (priv->m_can_fifo_read)
+		ret = priv->m_can_read(priv, read_fifo_addr);
+	else
+		ret = readl(read_fifo_addr);
+
+	return ret;
 }
 
-static inline void m_can_fifo_write(const struct m_can_priv *priv,
+static inline void m_can_fifo_write(const struct m_can_classdev *priv,
 				    u32 fpi, unsigned int offset, u32 val)
 {
-	writel(val, priv->mram_base + priv->mcfg[MRAM_TXB].off +
-	       fpi * TXB_ELEMENT_SIZE + offset);
+	u32 addr_offset =  priv->mcfg[MRAM_TXB].off + fpi * TXB_ELEMENT_SIZE + offset;
+	u32 write_fifo_addr;
+	u32 ret;
+
+	if (priv->mram_start)
+		write_fifo_addr = priv->mram_start + addr_offset;
+	else
+		write_fifo_addr = priv->mram_base + addr_offset;
+
+	if (priv->m_can_write)
+		ret = priv->m_can_write(priv, write_fifo_addr, val);
+	else
+		writel(val, write_fifo_addr);
+
+	return ret;
 }
 
-static inline u32 m_can_txe_fifo_read(const struct m_can_priv *priv,
+static inline u32 m_can_txe_fifo_read(const struct m_can_classdev *priv,
 				      u32 fgi,
-				      u32 offset) {
-	return readl(priv->mram_base + priv->mcfg[MRAM_TXE].off +
-			fgi * TXE_ELEMENT_SIZE + offset);
+				      u32 offset)
+{
+	u32 addr_offset = priv->mcfg[MRAM_TXE].off + fgi * TXE_ELEMENT_SIZE + offset;
+	u32 read_fifo_addr;
+	u32 ret = 0;
+
+printk("%s: Here\n", __func__);
+	if (priv->mram_start)
+		read_fifo_addr = priv->mram_start + addr_offset;
+	else
+		read_fifo_addr = priv->mram_base + addr_offset;
+
+	if (priv->m_can_fifo_read)
+		ret = priv->m_can_read(priv, read_fifo_addr);
+	else
+		ret = readl(read_fifo_addr);
+
+	return ret;
 }
 
-static inline bool m_can_tx_fifo_full(const struct m_can_priv *priv)
+static inline bool m_can_tx_fifo_full(const struct m_can_classdev *priv)
 {
+printk("%s: Here\n", __func__);
 		return !!(m_can_read(priv, M_CAN_TXFQS) & TXFQS_TFQF);
 }
 
-static inline void m_can_config_endisable(const struct m_can_priv *priv,
-					  bool enable)
+void m_can_config_endisable(const struct m_can_classdev *priv, bool enable)
 {
 	u32 cccr = m_can_read(priv, M_CAN_CCCR);
 	u32 timeout = 10;
@@ -430,7 +442,7 @@  static inline void m_can_config_endisable(const struct m_can_priv *priv,
 
 	while ((m_can_read(priv, M_CAN_CCCR) & (CCCR_INIT | CCCR_CCE)) != val) {
 		if (timeout == 0) {
-			netdev_warn(priv->dev, "Failed to init module\n");
+			netdev_warn(priv->net, "Failed to init module\n");
 			return;
 		}
 		timeout--;
@@ -438,13 +450,13 @@  static inline void m_can_config_endisable(const struct m_can_priv *priv,
 	}
 }
 
-static inline void m_can_enable_all_interrupts(const struct m_can_priv *priv)
+static inline void m_can_enable_all_interrupts(const struct m_can_classdev *priv)
 {
 	/* Only interrupt line 0 is used in this driver */
 	m_can_write(priv, M_CAN_ILE, ILE_EINT0);
 }
 
-static inline void m_can_disable_all_interrupts(const struct m_can_priv *priv)
+static inline void m_can_disable_all_interrupts(const struct m_can_classdev *priv)
 {
 	m_can_write(priv, M_CAN_ILE, 0x0);
 }
@@ -452,12 +464,12 @@  static inline void m_can_disable_all_interrupts(const struct m_can_priv *priv)
 static void m_can_read_fifo(struct net_device *dev, u32 rxfs)
 {
 	struct net_device_stats *stats = &dev->stats;
-	struct m_can_priv *priv = netdev_priv(dev);
+	struct m_can_classdev *priv = netdev_priv(dev);
 	struct canfd_frame *cf;
 	struct sk_buff *skb;
 	u32 id, fgi, dlc;
 	int i;
-
+printk("%s: Here\n", __func__);
 	/* calculate the fifo get index for where to read data */
 	fgi = (rxfs & RXFS_FGI_MASK) >> RXFS_FGI_SHIFT;
 	dlc = m_can_fifo_read(priv, fgi, M_CAN_FIFO_DLC);
@@ -509,10 +521,10 @@  static void m_can_read_fifo(struct net_device *dev, u32 rxfs)
 
 static int m_can_do_rx_poll(struct net_device *dev, int quota)
 {
-	struct m_can_priv *priv = netdev_priv(dev);
+	struct m_can_classdev *priv = netdev_priv(dev);
 	u32 pkts = 0;
 	u32 rxfs;
-
+printk("%s: Here\n", __func__);
 	rxfs = m_can_read(priv, M_CAN_RXF0S);
 	if (!(rxfs & RXFS_FFL_MASK)) {
 		netdev_dbg(dev, "no messages in fifo0\n");
@@ -541,7 +553,7 @@  static int m_can_handle_lost_msg(struct net_device *dev)
 	struct net_device_stats *stats = &dev->stats;
 	struct sk_buff *skb;
 	struct can_frame *frame;
-
+printk("%s: Here\n", __func__);
 	netdev_err(dev, "msg lost in rxf0\n");
 
 	stats->rx_errors++;
@@ -562,11 +574,11 @@  static int m_can_handle_lost_msg(struct net_device *dev)
 static int m_can_handle_lec_err(struct net_device *dev,
 				enum m_can_lec_type lec_type)
 {
-	struct m_can_priv *priv = netdev_priv(dev);
+	struct m_can_classdev *priv = netdev_priv(dev);
 	struct net_device_stats *stats = &dev->stats;
 	struct can_frame *cf;
 	struct sk_buff *skb;
-
+printk("%s: Here\n", __func__);
 	priv->can.can_stats.bus_error++;
 	stats->rx_errors++;
 
@@ -619,7 +631,7 @@  static int m_can_handle_lec_err(struct net_device *dev,
 static int __m_can_get_berr_counter(const struct net_device *dev,
 				    struct can_berr_counter *bec)
 {
-	struct m_can_priv *priv = netdev_priv(dev);
+	struct m_can_classdev *priv = netdev_priv(dev);
 	unsigned int ecr;
 
 	ecr = m_can_read(priv, M_CAN_ECR);
@@ -629,28 +641,32 @@  static int __m_can_get_berr_counter(const struct net_device *dev,
 	return 0;
 }
 
-static int m_can_clk_start(struct m_can_priv *priv)
+static int m_can_clk_start(struct m_can_classdev *priv)
 {
 	int err;
 
-	err = pm_runtime_get_sync(priv->device);
+	if (priv->pm_clock_support == 0)
+		return 0;
+
+	err = pm_runtime_get_sync(priv->dev);
 	if (err < 0) {
-		pm_runtime_put_noidle(priv->device);
+		pm_runtime_put_noidle(priv->dev);
 		return err;
 	}
 
 	return 0;
 }
 
-static void m_can_clk_stop(struct m_can_priv *priv)
+static void m_can_clk_stop(struct m_can_classdev *priv)
 {
-	pm_runtime_put_sync(priv->device);
+	if (priv->pm_clock_support)
+		pm_runtime_put_sync(priv->dev);
 }
 
 static int m_can_get_berr_counter(const struct net_device *dev,
 				  struct can_berr_counter *bec)
 {
-	struct m_can_priv *priv = netdev_priv(dev);
+	struct m_can_classdev *priv = netdev_priv(dev);
 	int err;
 
 	err = m_can_clk_start(priv);
@@ -667,7 +683,7 @@  static int m_can_get_berr_counter(const struct net_device *dev,
 static int m_can_handle_state_change(struct net_device *dev,
 				     enum can_state new_state)
 {
-	struct m_can_priv *priv = netdev_priv(dev);
+	struct m_can_classdev *priv = netdev_priv(dev);
 	struct net_device_stats *stats = &dev->stats;
 	struct can_frame *cf;
 	struct sk_buff *skb;
@@ -741,7 +757,7 @@  static int m_can_handle_state_change(struct net_device *dev,
 
 static int m_can_handle_state_errors(struct net_device *dev, u32 psr)
 {
-	struct m_can_priv *priv = netdev_priv(dev);
+	struct m_can_classdev *priv = netdev_priv(dev);
 	int work_done = 0;
 
 	if ((psr & PSR_EW) &&
@@ -794,7 +810,7 @@  static inline bool is_lec_err(u32 psr)
 static int m_can_handle_bus_errors(struct net_device *dev, u32 irqstatus,
 				   u32 psr)
 {
-	struct m_can_priv *priv = netdev_priv(dev);
+	struct m_can_classdev *priv = netdev_priv(dev);
 	int work_done = 0;
 
 	if (irqstatus & IR_RF0L)
@@ -814,7 +830,7 @@  static int m_can_handle_bus_errors(struct net_device *dev, u32 irqstatus,
 static int m_can_poll(struct napi_struct *napi, int quota)
 {
 	struct net_device *dev = napi->dev;
-	struct m_can_priv *priv = netdev_priv(dev);
+	struct m_can_classdev *priv = netdev_priv(dev);
 	int work_done = 0;
 	u32 irqstatus, psr;
 
@@ -849,7 +865,7 @@  static void m_can_echo_tx_event(struct net_device *dev)
 	int i = 0;
 	unsigned int msg_mark;
 
-	struct m_can_priv *priv = netdev_priv(dev);
+	struct m_can_classdev *priv = netdev_priv(dev);
 	struct net_device_stats *stats = &dev->stats;
 
 	/* read tx event fifo status */
@@ -882,7 +898,7 @@  static void m_can_echo_tx_event(struct net_device *dev)
 static irqreturn_t m_can_isr(int irq, void *dev_id)
 {
 	struct net_device *dev = (struct net_device *)dev_id;
-	struct m_can_priv *priv = netdev_priv(dev);
+	struct m_can_classdev *priv = netdev_priv(dev);
 	struct net_device_stats *stats = &dev->stats;
 	u32 ir;
 
@@ -977,7 +993,7 @@  static const struct can_bittiming_const m_can_data_bittiming_const_31X = {
 
 static int m_can_set_bittiming(struct net_device *dev)
 {
-	struct m_can_priv *priv = netdev_priv(dev);
+	struct m_can_classdev *priv = netdev_priv(dev);
 	const struct can_bittiming *bt = &priv->can.bittiming;
 	const struct can_bittiming *dbt = &priv->can.data_bittiming;
 	u16 brp, sjw, tseg1, tseg2;
@@ -1050,7 +1066,7 @@  static int m_can_set_bittiming(struct net_device *dev)
  */
 static void m_can_chip_config(struct net_device *dev)
 {
-	struct m_can_priv *priv = netdev_priv(dev);
+	struct m_can_classdev *priv = netdev_priv(dev);
 	u32 cccr, test;
 
 	m_can_config_endisable(priv, true);
@@ -1150,17 +1166,17 @@  static void m_can_chip_config(struct net_device *dev)
 
 	/* route all interrupts to INT0 */
 	m_can_write(priv, M_CAN_ILS, ILS_ALL_INT0);
-
+printk("%s: Bit timing\n", __func__);
 	/* set bittiming params */
 	m_can_set_bittiming(dev);
-
+printk("%s: out\n", __func__);
 	m_can_config_endisable(priv, false);
 }
 
 static void m_can_start(struct net_device *dev)
 {
-	struct m_can_priv *priv = netdev_priv(dev);
-
+	struct m_can_classdev *priv = netdev_priv(dev);
+printk("%s: Hear\n", __func__);
 	/* basic m_can configuration */
 	m_can_chip_config(dev);
 
@@ -1171,6 +1187,7 @@  static void m_can_start(struct net_device *dev)
 
 static int m_can_set_mode(struct net_device *dev, enum can_mode mode)
 {
+printk("%s: Hear\n", __func__);
 	switch (mode) {
 	case CAN_MODE_START:
 		m_can_start(dev);
@@ -1188,20 +1205,17 @@  static int m_can_set_mode(struct net_device *dev, enum can_mode mode)
  * else it returns the release and step coded as:
  * return value = 10 * <release> + 1 * <step>
  */
-static int m_can_check_core_release(void __iomem *m_can_base)
+static int m_can_check_core_release(struct m_can_classdev *priv)
 {
 	u32 crel_reg;
 	u8 rel;
 	u8 step;
 	int res;
-	struct m_can_priv temp_priv = {
-		.base = m_can_base
-	};
 
 	/* Read Core Release Version and split into version number
 	 * Example: Version 3.2.1 => rel = 3; step = 2; substep = 1;
 	 */
-	crel_reg = m_can_read(&temp_priv, M_CAN_CREL);
+	crel_reg = m_can_read(priv, M_CAN_CREL);
 	rel = (u8)((crel_reg & CREL_REL_MASK) >> CREL_REL_SHIFT);
 	step = (u8)((crel_reg & CREL_STEP_MASK) >> CREL_STEP_SHIFT);
 
@@ -1219,86 +1233,84 @@  static int m_can_check_core_release(void __iomem *m_can_base)
 /* Selectable Non ISO support only in version 3.2.x
  * This function checks if the bit is writable.
  */
-static bool m_can_niso_supported(const struct m_can_priv *priv)
+static bool m_can_niso_supported(const struct m_can_classdev *priv)
 {
 	u32 cccr_reg, cccr_poll;
-	int niso_timeout;
+	int niso_timeout = 0;
 
 	m_can_config_endisable(priv, true);
 	cccr_reg = m_can_read(priv, M_CAN_CCCR);
 	cccr_reg |= CCCR_NISO;
 	m_can_write(priv, M_CAN_CCCR, cccr_reg);
-
-	niso_timeout = readl_poll_timeout((priv->base + M_CAN_CCCR), cccr_poll,
-					  (cccr_poll == cccr_reg), 0, 10);
+printk("%s: Fix readl poll timeout\n", __func__);
+/*	niso_timeout = readl_poll_timeout((priv->base + M_CAN_CCCR), cccr_poll,
+					  (cccr_poll == cccr_reg), 0, 10);*/
 
 	/* Clear NISO */
 	cccr_reg &= ~(CCCR_NISO);
 	m_can_write(priv, M_CAN_CCCR, cccr_reg);
 
 	m_can_config_endisable(priv, false);
-
+printk("%s: out\n", __func__);
 	/* return false if time out (-ETIMEDOUT), else return true */
 	return !niso_timeout;
 }
 
-static int m_can_dev_setup(struct platform_device *pdev, struct net_device *dev,
-			   void __iomem *addr)
+static int m_can_dev_setup(struct net_device *dev)
 {
-	struct m_can_priv *priv;
+	struct m_can_classdev *m_can_dev;
 	int m_can_version;
 
-	m_can_version = m_can_check_core_release(addr);
+	m_can_dev = netdev_priv(dev);
+
+	m_can_version = m_can_check_core_release(m_can_dev);
 	/* return if unsupported version */
 	if (!m_can_version) {
-		dev_err(&pdev->dev, "Unsupported version number: %2d",
+		dev_err(m_can_dev->dev, "Unsupported version number: %2d",
 			m_can_version);
 		return -EINVAL;
 	}
 
-	priv = netdev_priv(dev);
-	netif_napi_add(dev, &priv->napi, m_can_poll, M_CAN_NAPI_WEIGHT);
+	netif_napi_add(dev, &m_can_dev->napi, m_can_poll, M_CAN_NAPI_WEIGHT);
 
 	/* Shared properties of all M_CAN versions */
-	priv->version = m_can_version;
-	priv->dev = dev;
-	priv->base = addr;
-	priv->can.do_set_mode = m_can_set_mode;
-	priv->can.do_get_berr_counter = m_can_get_berr_counter;
+	m_can_dev->version = m_can_version;
+	m_can_dev->can.do_set_mode = m_can_set_mode;
+	m_can_dev->can.do_get_berr_counter = m_can_get_berr_counter;
 
 	/* Set M_CAN supported operations */
-	priv->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK |
+	m_can_dev->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK |
 					CAN_CTRLMODE_LISTENONLY |
 					CAN_CTRLMODE_BERR_REPORTING |
 					CAN_CTRLMODE_FD;
 
 	/* Set properties depending on M_CAN version */
-	switch (priv->version) {
+	switch (m_can_dev->version) {
 	case 30:
 		/* CAN_CTRLMODE_FD_NON_ISO is fixed with M_CAN IP v3.0.x */
 		can_set_static_ctrlmode(dev, CAN_CTRLMODE_FD_NON_ISO);
-		priv->can.bittiming_const = &m_can_bittiming_const_30X;
-		priv->can.data_bittiming_const =
+		m_can_dev->can.bittiming_const = &m_can_bittiming_const_30X;
+		m_can_dev->can.data_bittiming_const =
 				&m_can_data_bittiming_const_30X;
 		break;
 	case 31:
 		/* CAN_CTRLMODE_FD_NON_ISO is fixed with M_CAN IP v3.1.x */
 		can_set_static_ctrlmode(dev, CAN_CTRLMODE_FD_NON_ISO);
-		priv->can.bittiming_const = &m_can_bittiming_const_31X;
-		priv->can.data_bittiming_const =
+		m_can_dev->can.bittiming_const = &m_can_bittiming_const_31X;
+		m_can_dev->can.data_bittiming_const =
 				&m_can_data_bittiming_const_31X;
 		break;
 	case 32:
-		priv->can.bittiming_const = &m_can_bittiming_const_31X;
-		priv->can.data_bittiming_const =
+		m_can_dev->can.bittiming_const = &m_can_bittiming_const_31X;
+		m_can_dev->can.data_bittiming_const =
 				&m_can_data_bittiming_const_31X;
-		priv->can.ctrlmode_supported |= (m_can_niso_supported(priv)
+		m_can_dev->can.ctrlmode_supported |= (m_can_niso_supported(m_can_dev)
 						? CAN_CTRLMODE_FD_NON_ISO
 						: 0);
 		break;
 	default:
-		dev_err(&pdev->dev, "Unsupported version number: %2d",
-			priv->version);
+		dev_err(m_can_dev->dev, "Unsupported version number: %2d",
+			m_can_dev->version);
 		return -EINVAL;
 	}
 
@@ -1307,7 +1319,7 @@  static int m_can_dev_setup(struct platform_device *pdev, struct net_device *dev,
 
 static int m_can_open(struct net_device *dev)
 {
-	struct m_can_priv *priv = netdev_priv(dev);
+	struct m_can_classdev *priv = netdev_priv(dev);
 	int err;
 
 	err = m_can_clk_start(priv);
@@ -1347,7 +1359,7 @@  static int m_can_open(struct net_device *dev)
 
 static void m_can_stop(struct net_device *dev)
 {
-	struct m_can_priv *priv = netdev_priv(dev);
+	struct m_can_classdev *priv = netdev_priv(dev);
 
 	/* disable all interrupts */
 	m_can_disable_all_interrupts(priv);
@@ -1358,7 +1370,7 @@  static void m_can_stop(struct net_device *dev)
 
 static int m_can_close(struct net_device *dev)
 {
-	struct m_can_priv *priv = netdev_priv(dev);
+	struct m_can_classdev *priv = netdev_priv(dev);
 
 	netif_stop_queue(dev);
 	napi_disable(&priv->napi);
@@ -1373,7 +1385,7 @@  static int m_can_close(struct net_device *dev)
 
 static int m_can_next_echo_skb_occupied(struct net_device *dev, int putidx)
 {
-	struct m_can_priv *priv = netdev_priv(dev);
+	struct m_can_classdev *priv = netdev_priv(dev);
 	/*get wrap around for loopback skb index */
 	unsigned int wrap = priv->can.echo_skb_max;
 	int next_idx;
@@ -1388,7 +1400,7 @@  static int m_can_next_echo_skb_occupied(struct net_device *dev, int putidx)
 static netdev_tx_t m_can_start_xmit(struct sk_buff *skb,
 				    struct net_device *dev)
 {
-	struct m_can_priv *priv = netdev_priv(dev);
+	struct m_can_classdev *priv = netdev_priv(dev);
 	struct canfd_frame *cf = (struct canfd_frame *)skb->data;
 	u32 id, cccr, fdflags;
 	int i;
@@ -1515,21 +1527,7 @@  static int register_m_can_dev(struct net_device *dev)
 	return register_candev(dev);
 }
 
-static void m_can_init_ram(struct m_can_priv *priv)
-{
-	int end, i, start;
-
-	/* initialize the entire Message RAM in use to avoid possible
-	 * ECC/parity checksum errors when reading an uninitialized buffer
-	 */
-	start = priv->mcfg[MRAM_SIDF].off;
-	end = priv->mcfg[MRAM_TXB].off +
-		priv->mcfg[MRAM_TXB].num * TXB_ELEMENT_SIZE;
-	for (i = start; i < end; i += 4)
-		writel(0x0, priv->mram_base + i);
-}
-
-static void m_can_of_parse_mram(struct m_can_priv *priv,
+static void m_can_of_parse_mram(struct m_can_classdev *priv,
 				const u32 *mram_config_vals)
 {
 	priv->mcfg[MRAM_SIDF].off = mram_config_vals[0];
@@ -1556,7 +1554,7 @@  static void m_can_of_parse_mram(struct m_can_priv *priv,
 	priv->mcfg[MRAM_TXB].num = mram_config_vals[7] &
 			(TXBC_NDTB_MASK >> TXBC_NDTB_SHIFT);
 
-	dev_dbg(priv->device,
+	dev_dbg(priv->dev,
 		"mram_base %p sidf 0x%x %d xidf 0x%x %d rxf0 0x%x %d rxf1 0x%x %d rxb 0x%x %d txe 0x%x %d txb 0x%x %d\n",
 		priv->mram_base,
 		priv->mcfg[MRAM_SIDF].off, priv->mcfg[MRAM_SIDF].num,
@@ -1566,63 +1564,57 @@  static void m_can_of_parse_mram(struct m_can_priv *priv,
 		priv->mcfg[MRAM_RXB].off, priv->mcfg[MRAM_RXB].num,
 		priv->mcfg[MRAM_TXE].off, priv->mcfg[MRAM_TXE].num,
 		priv->mcfg[MRAM_TXB].off, priv->mcfg[MRAM_TXB].num);
-
-	m_can_init_ram(priv);
 }
 
-static int m_can_plat_probe(struct platform_device *pdev)
+void m_can_init_ram(struct m_can_classdev *priv)
 {
-	struct net_device *dev;
-	struct m_can_priv *priv;
-	struct resource *res;
-	void __iomem *addr;
-	void __iomem *mram_addr;
-	struct clk *hclk, *cclk;
-	int irq, ret;
-	struct device_node *np;
-	u32 mram_config_vals[MRAM_CFG_LEN];
-	u32 tx_fifo_size;
-
-	np = pdev->dev.of_node;
+	int end, i, start;
 
-	hclk = devm_clk_get(&pdev->dev, "hclk");
-	cclk = devm_clk_get(&pdev->dev, "cclk");
+	/* initialize the entire Message RAM in use to avoid possible
+	 * ECC/parity checksum errors when reading an uninitialized buffer
+	 */
+	start = priv->mcfg[MRAM_SIDF].off;
+	end = priv->mcfg[MRAM_TXB].off +
+		priv->mcfg[MRAM_TXB].num * TXB_ELEMENT_SIZE;
 
-	if (IS_ERR(hclk) || IS_ERR(cclk)) {
-		dev_err(&pdev->dev, "no clock found\n");
-		ret = -ENODEV;
-		goto failed_ret;
+	for (i = start; i < end; i += 4) {
+		if (priv->mram_start)
+			m_can_write(priv, priv->mram_start + i, 0x0);
+		else
+			writel(0x0, priv->mram_base + i);
 	}
+}
 
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "m_can");
-	addr = devm_ioremap_resource(&pdev->dev, res);
-	irq = platform_get_irq_byname(pdev, "int0");
+int m_can_core_get_clocks(struct m_can_classdev *m_can_dev)
+{
+	int ret = 0;
 
-	if (IS_ERR(addr) || irq < 0) {
-		ret = -EINVAL;
-		goto failed_ret;
-	}
+	m_can_dev->hclk = devm_clk_get(m_can_dev->dev, "hclk");
+	m_can_dev->cclk = devm_clk_get(m_can_dev->dev, "cclk");
 
-	/* message ram could be shared */
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "message_ram");
-	if (!res) {
+	if (IS_ERR(m_can_dev->cclk)) {
+		dev_err(m_can_dev->dev, "no clock found\n");
 		ret = -ENODEV;
-		goto failed_ret;
 	}
 
-	mram_addr = devm_ioremap(&pdev->dev, res->start, resource_size(res));
-	if (!mram_addr) {
-		ret = -ENOMEM;
-		goto failed_ret;
-	}
+	return ret;
+}
+
+struct m_can_classdev *m_can_core_allocate_dev(struct device *dev)
+{
+	struct m_can_classdev *class_dev = NULL;
+	u32 mram_config_vals[MRAM_CFG_LEN];
+	struct net_device *net_dev;
+	u32 tx_fifo_size;
+	int ret;
 
-	/* get message ram configuration */
-	ret = of_property_read_u32_array(np, "bosch,mram-cfg",
-					 mram_config_vals,
-					 sizeof(mram_config_vals) / 4);
+	ret = fwnode_property_read_u32_array(dev_fwnode(dev),
+					     "bosch,mram-cfg",
+					     mram_config_vals,
+					     sizeof(mram_config_vals) / 4);
 	if (ret) {
-		dev_err(&pdev->dev, "Could not get Message RAM configuration.");
-		goto failed_ret;
+		dev_err(dev, "Could not get Message RAM configuration.");
+		goto out;
 	}
 
 	/* Get TX FIFO size
@@ -1631,69 +1623,76 @@  static int m_can_plat_probe(struct platform_device *pdev)
 	tx_fifo_size = mram_config_vals[7];
 
 	/* allocate the m_can device */
-	dev = alloc_candev(sizeof(*priv), tx_fifo_size);
-	if (!dev) {
-		ret = -ENOMEM;
-		goto failed_ret;
+	net_dev = alloc_candev(sizeof(*class_dev), tx_fifo_size);
+	if (!net_dev) {
+		dev_err(dev, "Failed to allocate CAN device");
+		goto out;
 	}
 
-	priv = netdev_priv(dev);
-	dev->irq = irq;
-	priv->device = &pdev->dev;
-	priv->hclk = hclk;
-	priv->cclk = cclk;
-	priv->can.clock.freq = clk_get_rate(cclk);
-	priv->mram_base = mram_addr;
+	class_dev = netdev_priv(net_dev);
+	if (!class_dev) {
+		dev_err(dev, "Failed to init netdev private");
+		goto out;
+	}
 
-	platform_set_drvdata(pdev, dev);
-	SET_NETDEV_DEV(dev, &pdev->dev);
+	class_dev->net = net_dev;
+	class_dev->dev = dev;
+	SET_NETDEV_DEV(net_dev, dev);
 
-	/* Enable clocks. Necessary to read Core Release in order to determine
-	 * M_CAN version
-	 */
-	pm_runtime_enable(&pdev->dev);
-	ret = m_can_clk_start(priv);
-	if (ret)
-		goto pm_runtime_fail;
+	m_can_of_parse_mram(class_dev, mram_config_vals);
+out:
+	return class_dev;
+}
+
+int m_can_core_register(struct m_can_classdev *m_can_dev)
+{
+	int ret;
 
-	ret = m_can_dev_setup(pdev, dev, addr);
+	if (m_can_dev->pm_clock_support) {
+		pm_runtime_enable(m_can_dev->dev);
+		ret = m_can_clk_start(m_can_dev);
+		if (ret)
+			goto pm_runtime_fail;
+	}
+
+	ret = m_can_dev_setup(m_can_dev->net);
 	if (ret)
 		goto clk_disable;
 
-	ret = register_m_can_dev(dev);
+	ret = register_m_can_dev(m_can_dev->net);
 	if (ret) {
-		dev_err(&pdev->dev, "registering %s failed (err=%d)\n",
-			KBUILD_MODNAME, ret);
+		dev_err(m_can_dev->dev, "registering %s failed (err=%d)\n",
+			m_can_dev->net->name, ret);
 		goto clk_disable;
 	}
 
-	m_can_of_parse_mram(priv, mram_config_vals);
+	devm_can_led_init(m_can_dev->net);
 
-	devm_can_led_init(dev);
+	of_can_transceiver(m_can_dev->net);
 
-	of_can_transceiver(dev);
+	dev_info(m_can_dev->dev, "%s device registered (irq=%d, version=%d)\n",
+		 KBUILD_MODNAME, m_can_dev->net->irq, m_can_dev->version);
 
-	dev_info(&pdev->dev, "%s device registered (irq=%d, version=%d)\n",
-		 KBUILD_MODNAME, dev->irq, priv->version);
+	m_can_set_bittiming(m_can_dev->net);
 
 	/* Probe finished
 	 * Stop clocks. They will be reactivated once the M_CAN device is opened
 	 */
 clk_disable:
-	m_can_clk_stop(priv);
+	m_can_clk_stop(m_can_dev);
 pm_runtime_fail:
 	if (ret) {
-		pm_runtime_disable(&pdev->dev);
-		free_candev(dev);
+		pm_runtime_disable(m_can_dev->dev);
+		free_candev(m_can_dev->net);
 	}
-failed_ret:
+
 	return ret;
 }
 
-static __maybe_unused int m_can_suspend(struct device *dev)
+int m_can_core_suspend(struct device *dev)
 {
 	struct net_device *ndev = dev_get_drvdata(dev);
-	struct m_can_priv *priv = netdev_priv(ndev);
+	struct m_can_classdev *priv = netdev_priv(ndev);
 
 	if (netif_running(ndev)) {
 		netif_stop_queue(ndev);
@@ -1709,10 +1708,10 @@  static __maybe_unused int m_can_suspend(struct device *dev)
 	return 0;
 }
 
-static __maybe_unused int m_can_resume(struct device *dev)
+int m_can_core_resume(struct device *dev)
 {
 	struct net_device *ndev = dev_get_drvdata(dev);
-	struct m_can_priv *priv = netdev_priv(ndev);
+	struct m_can_classdev *priv = netdev_priv(ndev);
 
 	pinctrl_pm_select_default_state(dev);
 
@@ -1747,8 +1746,6 @@  static int m_can_plat_remove(struct platform_device *pdev)
 
 	pm_runtime_disable(&pdev->dev);
 
-	platform_set_drvdata(pdev, NULL);
-
 	free_candev(dev);
 
 	return 0;
@@ -1757,7 +1754,7 @@  static int m_can_plat_remove(struct platform_device *pdev)
 static int __maybe_unused m_can_runtime_suspend(struct device *dev)
 {
 	struct net_device *ndev = dev_get_drvdata(dev);
-	struct m_can_priv *priv = netdev_priv(ndev);
+	struct m_can_classdev *priv = netdev_priv(ndev);
 
 	clk_disable_unprepare(priv->cclk);
 	clk_disable_unprepare(priv->hclk);
@@ -1768,7 +1765,7 @@  static int __maybe_unused m_can_runtime_suspend(struct device *dev)
 static int __maybe_unused m_can_runtime_resume(struct device *dev)
 {
 	struct net_device *ndev = dev_get_drvdata(dev);
-	struct m_can_priv *priv = netdev_priv(ndev);
+	struct m_can_classdev *priv = netdev_priv(ndev);
 	int err;
 
 	err = clk_prepare_enable(priv->hclk);
@@ -1782,30 +1779,6 @@  static int __maybe_unused m_can_runtime_resume(struct device *dev)
 	return err;
 }
 
-static const struct dev_pm_ops m_can_pmops = {
-	SET_RUNTIME_PM_OPS(m_can_runtime_suspend,
-			   m_can_runtime_resume, NULL)
-	SET_SYSTEM_SLEEP_PM_OPS(m_can_suspend, m_can_resume)
-};
-
-static const struct of_device_id m_can_of_table[] = {
-	{ .compatible = "bosch,m_can", .data = NULL },
-	{ /* sentinel */ },
-};
-MODULE_DEVICE_TABLE(of, m_can_of_table);
-
-static struct platform_driver m_can_plat_driver = {
-	.driver = {
-		.name = KBUILD_MODNAME,
-		.of_match_table = m_can_of_table,
-		.pm     = &m_can_pmops,
-	},
-	.probe = m_can_plat_probe,
-	.remove = m_can_plat_remove,
-};
-
-module_platform_driver(m_can_plat_driver);
-
 MODULE_AUTHOR("Dong Aisheng <b29396@freescale.com>");
 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("CAN bus driver for Bosch M_CAN controller");
diff --git a/drivers/net/can/m_can/m_can_core.h b/drivers/net/can/m_can/m_can_core.h
new file mode 100644
index 000000000000..2a83aff323e9
--- /dev/null
+++ b/drivers/net/can/m_can/m_can_core.h
@@ -0,0 +1,100 @@ 
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+
+#ifndef _CAN_M_CAN_CORE_H_
+#define _CAN_M_CAN_CORE_H_
+
+#include <linux/can/core.h>
+#include <linux/can/led.h>
+#include <linux/completion.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/freezer.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/iopoll.h>
+#include <linux/can/dev.h>
+#include <linux/pinctrl/consumer.h>
+
+/* m_can lec values */
+enum m_can_lec_type {
+	LEC_NO_ERROR = 0,
+	LEC_STUFF_ERROR,
+	LEC_FORM_ERROR,
+	LEC_ACK_ERROR,
+	LEC_BIT1_ERROR,
+	LEC_BIT0_ERROR,
+	LEC_CRC_ERROR,
+	LEC_UNUSED,
+};
+
+enum m_can_mram_cfg {
+	MRAM_SIDF = 0,
+	MRAM_XIDF,
+	MRAM_RXF0,
+	MRAM_RXF1,
+	MRAM_RXB,
+	MRAM_TXE,
+	MRAM_TXB,
+	MRAM_CFG_NUM,
+};
+
+/* address offset and element number for each FIFO/Buffer in the Message RAM */
+struct mram_cfg {
+	u16 off;
+	u8  num;
+};
+
+struct m_can_classdev {
+	struct can_priv can;
+	struct napi_struct napi;
+	struct net_device *net;
+	struct device *dev;
+	struct clk *hclk;
+	struct clk *cclk;
+
+	void *device_data;
+
+	int version;
+	int freq;
+	u32 irqstatus;
+
+	u32 (*m_can_read) (const struct m_can_classdev *m_can_class, int reg);
+	int (*m_can_write) (const struct m_can_classdev *m_can_class, int reg, int val);
+	u32 (*m_can_fifo_read) (const struct m_can_classdev *m_can_class, int reg);
+	int (*m_can_fifo_write) (const struct m_can_classdev *m_can_class, int reg, int val);
+	u32 (*m_can_txe_fifo_read) (const struct m_can_classdev *m_can_class);
+
+	/* Memory mapped ip */
+	void __iomem *base;
+	void __iomem *mram_addr;
+	void __iomem *mram_base;
+
+	/* Register based ip */
+	int reg_offset;
+	int mram_start;
+	int pm_clock_support;
+
+	struct mram_cfg mcfg[MRAM_CFG_NUM];
+};
+
+struct m_can_classdev *m_can_core_allocate_dev(struct device *dev);
+int m_can_core_register(struct m_can_classdev *m_can_dev);
+int m_can_core_get_clocks(struct m_can_classdev *m_can_dev);
+void m_can_init_ram(struct m_can_classdev *priv);
+void m_can_config_endisable(const struct m_can_classdev *priv, bool enable);
+
+int m_can_core_suspend(struct device *dev);
+int m_can_core_resume(struct device *dev);
+
+#endif	/* _CAN_M_CAN_CORE_H_ */