diff mbox series

[AUTOSEL,4.4,27/65] arm64: Fix potential race with hardware DBM in ptep_set_access_flags()

Message ID 20181025141705.213937-27-sashal@kernel.org
State New
Headers show
Series None | expand

Commit Message

Sasha Levin Oct. 25, 2018, 2:16 p.m. UTC 
From: Catalin Marinas <catalin.marinas@arm.com>


[ Upstream commit 6d332747fa5f0a6843b56b5b129168ba909336d1 ]

In a system with DBM (dirty bit management) capable agents there is a
possible race between a CPU executing ptep_set_access_flags() (maybe
non-DBM capable) and a hardware update of the dirty state (clearing of
PTE_RDONLY). The scenario:

a) the pte is writable (PTE_WRITE set), clean (PTE_RDONLY set) and old
   (PTE_AF clear)
b) ptep_set_access_flags() is called as a result of a read access and it
   needs to set the pte to writable, clean and young (PTE_AF set)
c) a DBM-capable agent, as a result of a different write access, is
   marking the entry as young (setting PTE_AF) and dirty (clearing
   PTE_RDONLY)

The current ptep_set_access_flags() implementation would set the
PTE_RDONLY bit in the resulting value overriding the DBM update and
losing the dirty state.

This patch fixes such race by setting PTE_RDONLY to the most permissive
(lowest value) of the current entry and the new one.

Fixes: 66dbd6e61a52 ("arm64: Implement ptep_set_access_flags() for hardware AF/DBM")
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>

Acked-by: Steve Capper <steve.capper@arm.com>

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Signed-off-by: Will Deacon <will.deacon@arm.com>

Signed-off-by: Sasha Levin <sashal@kernel.org>

---
 arch/arm64/mm/fault.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

-- 
2.17.1
diff mbox series

Patch

diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c
index 86485415c5f0..be7f8416809f 100644
--- a/arch/arm64/mm/fault.c
+++ b/arch/arm64/mm/fault.c
@@ -107,26 +107,27 @@  int ptep_set_access_flags(struct vm_area_struct *vma,
 	/* only preserve the access flags and write permission */
 	pte_val(entry) &= PTE_AF | PTE_WRITE | PTE_DIRTY;
 
-	/*
-	 * PTE_RDONLY is cleared by default in the asm below, so set it in
-	 * back if necessary (read-only or clean PTE).
-	 */
+	/* set PTE_RDONLY if actual read-only or clean PTE */
 	if (!pte_write(entry) || !pte_sw_dirty(entry))
 		pte_val(entry) |= PTE_RDONLY;
 
 	/*
 	 * Setting the flags must be done atomically to avoid racing with the
-	 * hardware update of the access/dirty state.
+	 * hardware update of the access/dirty state. The PTE_RDONLY bit must
+	 * be set to the most permissive (lowest value) of *ptep and entry
+	 * (calculated as: a & b == ~(~a | ~b)).
 	 */
+	pte_val(entry) ^= PTE_RDONLY;
 	asm volatile("//	ptep_set_access_flags\n"
 	"	prfm	pstl1strm, %2\n"
 	"1:	ldxr	%0, %2\n"
-	"	and	%0, %0, %3		// clear PTE_RDONLY\n"
+	"	eor	%0, %0, %3		// negate PTE_RDONLY in *ptep\n"
 	"	orr	%0, %0, %4		// set flags\n"
+	"	eor	%0, %0, %3		// negate final PTE_RDONLY\n"
 	"	stxr	%w1, %0, %2\n"
 	"	cbnz	%w1, 1b\n"
 	: "=&r" (old_pteval), "=&r" (tmp), "+Q" (pte_val(*ptep))
-	: "L" (~PTE_RDONLY), "r" (pte_val(entry)));
+	: "L" (PTE_RDONLY), "r" (pte_val(entry)));
 
 	flush_tlb_fix_spurious_fault(vma, address);
 	return 1;