| Message ID | 20181105154529.7614-14-vkoul@kernel.org |
|---|---|
| State | New |
| Headers | show |
| Series | arm64: dts: qcom: qcs404: Add Device tree nodes | expand |
On Mon 05 Nov 07:45 PST 2018, Vinod Koul wrote: > From: Bjorn Andersson <bjorn.andersson@linaro.org> > > Add the TrustZone based remoteproc nodes and their glink edges for > adsp, cdsp and wcss. > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > Signed-off-by: Vinod Koul <vkoul@kernel.org> > --- > arch/arm64/boot/dts/qcom/qcs404.dtsi | 87 ++++++++++++++++++++++++++++++++++++ > 1 file changed, 87 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi > index 8e207a25ddf0..b560ab6e49ff 100644 > --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi > +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi > @@ -373,4 +373,91 @@ > #interrupt-cells = <2>; > }; > }; > + > + remoteproc-adsp { > + compatible = "qcom,qcs404-adsp-pas"; > + > + interrupts-extended = <&intc GIC_SPI 293 IRQ_TYPE_EDGE_RISING>, > + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, > + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, > + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, > + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; > + interrupt-names = "wdog", "fatal", "ready", > + "handover", "stop-ack"; > + > + clocks = <&xo_board>; > + clock-names = "xo"; > + As the TZ-backed remoteproc drivers will not be used on all variation of products on this platform please add status = "disabled"; to these nodes and enable them in the evb. Regards, Bjorn > + memory-region = <&adsp_fw_mem>; > + > + qcom,smem-states = <&adsp_smp2p_out 0>; > + qcom,smem-state-names = "stop"; > + > + glink-edge { > + interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>; > + > + qcom,remote-pid = <2>; > + mboxes = <&apcs_glb 8>; > + > + label = "adsp"; > + }; > + }; > + > + remoteproc-cdsp { > + compatible = "qcom,qcs404-cdsp-pas"; > + > + interrupts-extended = <&intc GIC_SPI 229 IRQ_TYPE_EDGE_RISING>, > + <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, > + <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, > + <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, > + <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; > + interrupt-names = "wdog", "fatal", "ready", > + "handover", "stop-ack"; > + > + clocks = <&xo_board>; > + clock-names = "xo"; > + > + memory-region = <&cdsp_fw_mem>; > + > + qcom,smem-states = <&cdsp_smp2p_out 0>; > + qcom,smem-state-names = "stop"; > + > + glink-edge { > + interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>; > + > + qcom,remote-pid = <5>; > + mboxes = <&apcs_glb 12>; > + > + label = "cdsp"; > + }; > + }; > + > + remoteproc-wcss { > + compatible = "qcom,qcs404-wcss-pas"; > + > + interrupts-extended = <&intc GIC_SPI 153 IRQ_TYPE_EDGE_RISING>, > + <&wcss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, > + <&wcss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, > + <&wcss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, > + <&wcss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; > + interrupt-names = "wdog", "fatal", "ready", > + "handover", "stop-ack"; > + > + clocks = <&xo_board>; > + clock-names = "xo"; > + > + memory-region = <&wlan_fw_mem>; > + > + qcom,smem-states = <&wcss_smp2p_out 0>; > + qcom,smem-state-names = "stop"; > + > + glink-edge { > + interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; > + > + qcom,remote-pid = <1>; > + mboxes = <&apcs_glb 16>; > + > + label = "wcss"; > + }; > + }; > }; > -- > 2.14.4 >
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index 8e207a25ddf0..b560ab6e49ff 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -373,4 +373,91 @@ #interrupt-cells = <2>; }; }; + + remoteproc-adsp { + compatible = "qcom,qcs404-adsp-pas"; + + interrupts-extended = <&intc GIC_SPI 293 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&xo_board>; + clock-names = "xo"; + + memory-region = <&adsp_fw_mem>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + glink-edge { + interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>; + + qcom,remote-pid = <2>; + mboxes = <&apcs_glb 8>; + + label = "adsp"; + }; + }; + + remoteproc-cdsp { + compatible = "qcom,qcs404-cdsp-pas"; + + interrupts-extended = <&intc GIC_SPI 229 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&xo_board>; + clock-names = "xo"; + + memory-region = <&cdsp_fw_mem>; + + qcom,smem-states = <&cdsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + glink-edge { + interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>; + + qcom,remote-pid = <5>; + mboxes = <&apcs_glb 12>; + + label = "cdsp"; + }; + }; + + remoteproc-wcss { + compatible = "qcom,qcs404-wcss-pas"; + + interrupts-extended = <&intc GIC_SPI 153 IRQ_TYPE_EDGE_RISING>, + <&wcss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&wcss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&wcss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&wcss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&xo_board>; + clock-names = "xo"; + + memory-region = <&wlan_fw_mem>; + + qcom,smem-states = <&wcss_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + glink-edge { + interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; + + qcom,remote-pid = <1>; + mboxes = <&apcs_glb 16>; + + label = "wcss"; + }; + }; };