[8/9] ARM: Exynos: Add minimal support for ARM 64bit based Exynos5433 SoC

Message ID 20181107150459.23431-1-m.szyprowski@samsung.com
State New
Headers show
Series
  • ARM: Exynos: Add TM2 board support
Related show

Commit Message

Marek Szyprowski Nov. 7, 2018, 3:04 p.m.
This patch adds minimal support for Exynos5433 SoC (ARM64 based).

The following devices are supported:
- mmc0 (for eMMC)
- serial1 (for debug/console)
- gpa0..3 and gpb0..2 GPIO banks

Based on earlier work done by Lukasz Majewski <l.majewski@samsung.com>.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 arch/arm/cpu/armv8/Kconfig       |  2 +-
 arch/arm/dts/exynos5433.dtsi     | 84 ++++++++++++++++++++++++++++++++
 arch/arm/mach-exynos/Kconfig     |  7 +++
 arch/arm/mach-exynos/mmu-arm64.c | 24 +++++++++
 arch/arm/mach-exynos/soc.c       |  3 ++
 drivers/gpio/s5p_gpio.c          |  1 +
 scripts/config_whitelist.txt     |  1 +
 7 files changed, 121 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/dts/exynos5433.dtsi

Comments

Minkyu Kang Nov. 19, 2018, 10:23 a.m. | #1
Dear Marek Szyprowski,

On 08/11/18 00:04, Marek Szyprowski wrote:
> This patch adds minimal support for Exynos5433 SoC (ARM64 based).
> 
> The following devices are supported:
> - mmc0 (for eMMC)
> - serial1 (for debug/console)
> - gpa0..3 and gpb0..2 GPIO banks
> 
> Based on earlier work done by Lukasz Majewski <l.majewski@samsung.com>.
> 
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> ---
>  arch/arm/cpu/armv8/Kconfig       |  2 +-
>  arch/arm/dts/exynos5433.dtsi     | 84 ++++++++++++++++++++++++++++++++
>  arch/arm/mach-exynos/Kconfig     |  7 +++
>  arch/arm/mach-exynos/mmu-arm64.c | 24 +++++++++
>  arch/arm/mach-exynos/soc.c       |  3 ++
>  drivers/gpio/s5p_gpio.c          |  1 +
>  scripts/config_whitelist.txt     |  1 +
>  7 files changed, 121 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm/dts/exynos5433.dtsi
> 
> diff --git a/arch/arm/cpu/armv8/Kconfig b/arch/arm/cpu/armv8/Kconfig
> index c8bebabdf6..295cdd4653 100644
> --- a/arch/arm/cpu/armv8/Kconfig
> +++ b/arch/arm/cpu/armv8/Kconfig
> @@ -96,7 +96,7 @@ endmenu
>  config PSCI_RESET
>  	bool "Use PSCI for reset and shutdown"
>  	default y
> -	depends on !ARCH_EXYNOS7 && !ARCH_BCM283X && \
> +	depends on !ARCH_EXYNOS5433 && !ARCH_EXYNOS7 && !ARCH_BCM283X && \
>  		   !TARGET_LS2080A_SIMU && !TARGET_LS2080AQDS && \
>  		   !TARGET_LS2080ARDB && !TARGET_LS2080A_EMU && \
>  		   !TARGET_LS1088ARDB && !TARGET_LS1088AQDS && \
> diff --git a/arch/arm/dts/exynos5433.dtsi b/arch/arm/dts/exynos5433.dtsi
> new file mode 100644
> index 0000000000..509b39a95f
> --- /dev/null
> +++ b/arch/arm/dts/exynos5433.dtsi
> @@ -0,0 +1,84 @@
> +/*
> + * SAMSUNG EXYNOS5433 SoC device tree source
> + *
> + * Copyright (c) 2018 Samsung Electronics Co., Ltd.
> + *		http://www.samsung.com
> + *
> + * SPDX-License-Identifier:	GPL-2.0+
> + */
> +
> +/dts-v1/;
> +#include "skeleton.dtsi"
> +
> +/ {
> +	mmc_0: mmc@15540000 {
> +		compatible = "samsung,exynos-dwmmc";
> +		reg = <0x0 0x15540000 0x0 0x1000>;
> +		samsung,bus-width = <8>;
> +		samsung,timing = <1 3 3>;
> +		samsung,removable = <0>;
> +		samsung,pre-init;
> +		fifoth_val = <0x201f0020>;
> +		status = "disabled";
> +	};
> +
> +	pinctrl_alive: pinctrl@10580000 {
> +		compatible = "samsung,exynos5433-pinctrl";
> +		reg = <0x10580000 0x1a20>, <0x11090000 0x100>;
> +		/* gpa0..3, gpf1..5 */
> +
> +		gpa0: gpa0 {
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +		};
> +
> +		gpa1: gpa1 {
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +		};
> +
> +		gpa2: gpa2 {
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +		};
> +
> +		gpa3: gpa3 {
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +
> +		};
> +	};
> +
> +	pinctrl_peric: pinctrl@14cc0000 {
> +		compatible = "samsung,exynos5433-pinctrl";
> +		reg = <0x14cc0000 0x1100>;
> +		/* gpv7, gpb0, gpc0..3, gpg0, gpd0..4,6,8,7, gpg1..3 */
> +
> +		gpv7: gpv7 {
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +		};
> +
> +		gpb0: gpb0 {
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +		};
> +
> +		gpb1: gpb1 {
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +		};
> +
> +		gpb2: gpb2 {
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +		};
> +	};
> +
> +	serial_1: serial@14c20000 {
> +		compatible = "samsung,exynos4210-uart";
> +		reg = <0x14c20000 0x100>;
> +		id = <1>;
> +		status = "disabled";
> +	};
> +};
> diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
> index ed04369cfa..4a49c8dcc2 100644
> --- a/arch/arm/mach-exynos/Kconfig
> +++ b/arch/arm/mach-exynos/Kconfig
> @@ -29,6 +29,13 @@ config ARCH_EXYNOS5
>  	  Cortex-A7 CPU in big.LITTLE configuration). There are multiple SoCs
>  	  in this family including Exynos5250, Exynos5420 and Exynos5800.
>  
> +config ARCH_EXYNOS5433
> +	bool "Exynos5433 SoC family"
> +	select ARM64
> +	help
> +	  Samsung Exynos5433 SoC family are based on ARM Cortex-A57 CPU and
> +	  Cortex-A53 CPU (in a big.LITTLE configuration).
> +
>  config ARCH_EXYNOS7
>  	bool "Exynos7 SoC family"
>  	select ARM64
> diff --git a/arch/arm/mach-exynos/mmu-arm64.c b/arch/arm/mach-exynos/mmu-arm64.c
> index 46b8169d19..a857a7318e 100644
> --- a/arch/arm/mach-exynos/mmu-arm64.c
> +++ b/arch/arm/mach-exynos/mmu-arm64.c
> @@ -29,3 +29,27 @@ static struct mm_region exynos7420_mem_map[] = {
>  
>  struct mm_region *mem_map = exynos7420_mem_map;
>  #endif
> +
> +#ifdef CONFIG_EXYNOS5433
> +static struct mm_region exynos5433_mem_map[] = {
> +	{
> +		.virt = 0x00000000UL,
> +		.phys = 0x00000000UL,
> +		.size = 0x20000000UL,
> +		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
> +			 PTE_BLOCK_NON_SHARE |
> +			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
> +	}, {
> +		.virt = 0x20000000UL,
> +		.phys = 0x20000000UL,
> +		.size = 0xC0000000UL,
> +		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
> +			 PTE_BLOCK_INNER_SHARE
> +	}, {
> +		/* List terminator */
> +		0,
> +	}
> +};
> +
> +struct mm_region *mem_map = exynos5433_mem_map;
> +#endif
> diff --git a/arch/arm/mach-exynos/soc.c b/arch/arm/mach-exynos/soc.c
> index 589e16c5ad..215cbb8f70 100644
> --- a/arch/arm/mach-exynos/soc.c
> +++ b/arch/arm/mach-exynos/soc.c
> @@ -23,6 +23,9 @@ void reset_cpu(ulong addr)
>  #ifdef CONFIG_CPU_V7A
>  	writel(0x1, samsung_get_base_swreset());
>  #endif
> +#ifdef CONFIG_ARCH_EXYNOS5433
> +	writel(0x1, (void *)0x105C0400);

Please don't use address directly.

> +#endif
>  }
>  
>  #ifndef CONFIG_SYS_DCACHE_OFF
> diff --git a/drivers/gpio/s5p_gpio.c b/drivers/gpio/s5p_gpio.c
> index e4b5383d0f..fcaad1c4a6 100644
> --- a/drivers/gpio/s5p_gpio.c
> +++ b/drivers/gpio/s5p_gpio.c
> @@ -357,6 +357,7 @@ static const struct udevice_id exynos_gpio_ids[] = {
>  	{ .compatible = "samsung,exynos4x12-pinctrl" },
>  	{ .compatible = "samsung,exynos5250-pinctrl" },
>  	{ .compatible = "samsung,exynos5420-pinctrl" },
> +	{ .compatible = "samsung,exynos5433-pinctrl" },
>  	{ }
>  };
>  
> diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
> index 94c0f1ff82..6438686fc4 100644
> --- a/scripts/config_whitelist.txt
> +++ b/scripts/config_whitelist.txt
> @@ -571,6 +571,7 @@ CONFIG_EXYNOS4210
>  CONFIG_EXYNOS5
>  CONFIG_EXYNOS5250
>  CONFIG_EXYNOS5420
> +CONFIG_EXYNOS5433
>  CONFIG_EXYNOS5_DT
>  CONFIG_EXYNOS7420
>  CONFIG_EXYNOS_ACE_SHA
> 

Thanks,
Minkyu Kang.
Lukasz Majewski Nov. 21, 2018, 1:12 a.m. | #2
On Wed, 07 Nov 2018 16:04:59 +0100
Marek Szyprowski <m.szyprowski@samsung.com> wrote:

> This patch adds minimal support for Exynos5433 SoC (ARM64 based).

> 

> The following devices are supported:

> - mmc0 (for eMMC)

> - serial1 (for debug/console)

> - gpa0..3 and gpb0..2 GPIO banks

> 

> Based on earlier work done by Lukasz Majewski

> <l.majewski@samsung.com>.

> 

> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>

> ---

>  arch/arm/cpu/armv8/Kconfig       |  2 +-

>  arch/arm/dts/exynos5433.dtsi     | 84

> ++++++++++++++++++++++++++++++++ arch/arm/mach-exynos/Kconfig     |

> 7 +++ arch/arm/mach-exynos/mmu-arm64.c | 24 +++++++++

>  arch/arm/mach-exynos/soc.c       |  3 ++

>  drivers/gpio/s5p_gpio.c          |  1 +

>  scripts/config_whitelist.txt     |  1 +

>  7 files changed, 121 insertions(+), 1 deletion(-)

>  create mode 100644 arch/arm/dts/exynos5433.dtsi

> 

> diff --git a/arch/arm/cpu/armv8/Kconfig b/arch/arm/cpu/armv8/Kconfig

> index c8bebabdf6..295cdd4653 100644

> --- a/arch/arm/cpu/armv8/Kconfig

> +++ b/arch/arm/cpu/armv8/Kconfig

> @@ -96,7 +96,7 @@ endmenu

>  config PSCI_RESET

>  	bool "Use PSCI for reset and shutdown"

>  	default y

> -	depends on !ARCH_EXYNOS7 && !ARCH_BCM283X && \

> +	depends on !ARCH_EXYNOS5433 && !ARCH_EXYNOS7

> && !ARCH_BCM283X && \ !TARGET_LS2080A_SIMU && !TARGET_LS2080AQDS && \

>  		   !TARGET_LS2080ARDB && !TARGET_LS2080A_EMU && \

>  		   !TARGET_LS1088ARDB && !TARGET_LS1088AQDS && \

> diff --git a/arch/arm/dts/exynos5433.dtsi

> b/arch/arm/dts/exynos5433.dtsi new file mode 100644

> index 0000000000..509b39a95f

> --- /dev/null

> +++ b/arch/arm/dts/exynos5433.dtsi

> @@ -0,0 +1,84 @@

> +/*

> + * SAMSUNG EXYNOS5433 SoC device tree source

> + *

> + * Copyright (c) 2018 Samsung Electronics Co., Ltd.

> + *		http://www.samsung.com

> + *

> + * SPDX-License-Identifier:	GPL-2.0+


Has this file been took from the Linux kernel?

If yes, please provide SHA1 from master (in the commit message).

> + */

> +

> +/dts-v1/;

> +#include "skeleton.dtsi"

> +

> +/ {

> +	mmc_0: mmc@15540000 {

> +		compatible = "samsung,exynos-dwmmc";

> +		reg = <0x0 0x15540000 0x0 0x1000>;

> +		samsung,bus-width = <8>;

> +		samsung,timing = <1 3 3>;

> +		samsung,removable = <0>;

> +		samsung,pre-init;

> +		fifoth_val = <0x201f0020>;

> +		status = "disabled";

> +	};

> +

> +	pinctrl_alive: pinctrl@10580000 {

> +		compatible = "samsung,exynos5433-pinctrl";

> +		reg = <0x10580000 0x1a20>, <0x11090000 0x100>;

> +		/* gpa0..3, gpf1..5 */

> +

> +		gpa0: gpa0 {

> +			gpio-controller;

> +			#gpio-cells = <2>;

> +		};

> +

> +		gpa1: gpa1 {

> +			gpio-controller;

> +			#gpio-cells = <2>;

> +		};

> +

> +		gpa2: gpa2 {

> +			gpio-controller;

> +			#gpio-cells = <2>;

> +		};

> +

> +		gpa3: gpa3 {

> +			gpio-controller;

> +			#gpio-cells = <2>;

> +

> +		};

> +	};

> +

> +	pinctrl_peric: pinctrl@14cc0000 {

> +		compatible = "samsung,exynos5433-pinctrl";

> +		reg = <0x14cc0000 0x1100>;

> +		/* gpv7, gpb0, gpc0..3, gpg0, gpd0..4,6,8,7, gpg1..3

> */ +

> +		gpv7: gpv7 {

> +			gpio-controller;

> +			#gpio-cells = <2>;

> +		};

> +

> +		gpb0: gpb0 {

> +			gpio-controller;

> +			#gpio-cells = <2>;

> +		};

> +

> +		gpb1: gpb1 {

> +			gpio-controller;

> +			#gpio-cells = <2>;

> +		};

> +

> +		gpb2: gpb2 {

> +			gpio-controller;

> +			#gpio-cells = <2>;

> +		};

> +	};

> +

> +	serial_1: serial@14c20000 {

> +		compatible = "samsung,exynos4210-uart";

> +		reg = <0x14c20000 0x100>;

> +		id = <1>;

> +		status = "disabled";

> +	};

> +};

> diff --git a/arch/arm/mach-exynos/Kconfig

> b/arch/arm/mach-exynos/Kconfig index ed04369cfa..4a49c8dcc2 100644

> --- a/arch/arm/mach-exynos/Kconfig

> +++ b/arch/arm/mach-exynos/Kconfig

> @@ -29,6 +29,13 @@ config ARCH_EXYNOS5

>  	  Cortex-A7 CPU in big.LITTLE configuration). There are

> multiple SoCs in this family including Exynos5250, Exynos5420 and

> Exynos5800. 

> +config ARCH_EXYNOS5433

> +	bool "Exynos5433 SoC family"

> +	select ARM64

> +	help

> +	  Samsung Exynos5433 SoC family are based on ARM Cortex-A57

> CPU and

> +	  Cortex-A53 CPU (in a big.LITTLE configuration).

> +

>  config ARCH_EXYNOS7

>  	bool "Exynos7 SoC family"

>  	select ARM64

> diff --git a/arch/arm/mach-exynos/mmu-arm64.c

> b/arch/arm/mach-exynos/mmu-arm64.c index 46b8169d19..a857a7318e 100644

> --- a/arch/arm/mach-exynos/mmu-arm64.c

> +++ b/arch/arm/mach-exynos/mmu-arm64.c

> @@ -29,3 +29,27 @@ static struct mm_region exynos7420_mem_map[] = {

>  

>  struct mm_region *mem_map = exynos7420_mem_map;

>  #endif

> +

> +#ifdef CONFIG_EXYNOS5433

> +static struct mm_region exynos5433_mem_map[] = {

> +	{

> +		.virt = 0x00000000UL,

> +		.phys = 0x00000000UL,

> +		.size = 0x20000000UL,

> +		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |

> +			 PTE_BLOCK_NON_SHARE |

> +			 PTE_BLOCK_PXN | PTE_BLOCK_UXN

> +	}, {

> +		.virt = 0x20000000UL,

> +		.phys = 0x20000000UL,

> +		.size = 0xC0000000UL,

> +		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |

> +			 PTE_BLOCK_INNER_SHARE

> +	}, {

> +		/* List terminator */

> +		0,

> +	}

> +};

> +

> +struct mm_region *mem_map = exynos5433_mem_map;

> +#endif

> diff --git a/arch/arm/mach-exynos/soc.c b/arch/arm/mach-exynos/soc.c

> index 589e16c5ad..215cbb8f70 100644

> --- a/arch/arm/mach-exynos/soc.c

> +++ b/arch/arm/mach-exynos/soc.c

> @@ -23,6 +23,9 @@ void reset_cpu(ulong addr)

>  #ifdef CONFIG_CPU_V7A

>  	writel(0x1, samsung_get_base_swreset());

>  #endif

> +#ifdef CONFIG_ARCH_EXYNOS5433

> +	writel(0x1, (void *)0x105C0400);


Please provide either #define for it or explain this magic value in
a (verbose) comment.

> +#endif

>  }

>  

>  #ifndef CONFIG_SYS_DCACHE_OFF

> diff --git a/drivers/gpio/s5p_gpio.c b/drivers/gpio/s5p_gpio.c

> index e4b5383d0f..fcaad1c4a6 100644

> --- a/drivers/gpio/s5p_gpio.c

> +++ b/drivers/gpio/s5p_gpio.c

> @@ -357,6 +357,7 @@ static const struct udevice_id exynos_gpio_ids[]

> = { { .compatible = "samsung,exynos4x12-pinctrl" },

>  	{ .compatible = "samsung,exynos5250-pinctrl" },

>  	{ .compatible = "samsung,exynos5420-pinctrl" },

> +	{ .compatible = "samsung,exynos5433-pinctrl" },

>  	{ }

>  };

>  

> diff --git a/scripts/config_whitelist.txt

> b/scripts/config_whitelist.txt index 94c0f1ff82..6438686fc4 100644

> --- a/scripts/config_whitelist.txt

> +++ b/scripts/config_whitelist.txt

> @@ -571,6 +571,7 @@ CONFIG_EXYNOS4210

>  CONFIG_EXYNOS5

>  CONFIG_EXYNOS5250

>  CONFIG_EXYNOS5420

> +CONFIG_EXYNOS5433


The config_writelist.txt is to prevent from adding new CONFIG_* options
to include/configs/<myboard>.h

The CONFIG_EXYNOS5433 shall be added to a proper Kconfig

>  CONFIG_EXYNOS5_DT

>  CONFIG_EXYNOS7420

>  CONFIG_EXYNOS_ACE_SHA





Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de

Patch

diff --git a/arch/arm/cpu/armv8/Kconfig b/arch/arm/cpu/armv8/Kconfig
index c8bebabdf6..295cdd4653 100644
--- a/arch/arm/cpu/armv8/Kconfig
+++ b/arch/arm/cpu/armv8/Kconfig
@@ -96,7 +96,7 @@  endmenu
 config PSCI_RESET
 	bool "Use PSCI for reset and shutdown"
 	default y
-	depends on !ARCH_EXYNOS7 && !ARCH_BCM283X && \
+	depends on !ARCH_EXYNOS5433 && !ARCH_EXYNOS7 && !ARCH_BCM283X && \
 		   !TARGET_LS2080A_SIMU && !TARGET_LS2080AQDS && \
 		   !TARGET_LS2080ARDB && !TARGET_LS2080A_EMU && \
 		   !TARGET_LS1088ARDB && !TARGET_LS1088AQDS && \
diff --git a/arch/arm/dts/exynos5433.dtsi b/arch/arm/dts/exynos5433.dtsi
new file mode 100644
index 0000000000..509b39a95f
--- /dev/null
+++ b/arch/arm/dts/exynos5433.dtsi
@@ -0,0 +1,84 @@ 
+/*
+ * SAMSUNG EXYNOS5433 SoC device tree source
+ *
+ * Copyright (c) 2018 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/dts-v1/;
+#include "skeleton.dtsi"
+
+/ {
+	mmc_0: mmc@15540000 {
+		compatible = "samsung,exynos-dwmmc";
+		reg = <0x0 0x15540000 0x0 0x1000>;
+		samsung,bus-width = <8>;
+		samsung,timing = <1 3 3>;
+		samsung,removable = <0>;
+		samsung,pre-init;
+		fifoth_val = <0x201f0020>;
+		status = "disabled";
+	};
+
+	pinctrl_alive: pinctrl@10580000 {
+		compatible = "samsung,exynos5433-pinctrl";
+		reg = <0x10580000 0x1a20>, <0x11090000 0x100>;
+		/* gpa0..3, gpf1..5 */
+
+		gpa0: gpa0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpa1: gpa1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpa2: gpa2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpa3: gpa3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+		};
+	};
+
+	pinctrl_peric: pinctrl@14cc0000 {
+		compatible = "samsung,exynos5433-pinctrl";
+		reg = <0x14cc0000 0x1100>;
+		/* gpv7, gpb0, gpc0..3, gpg0, gpd0..4,6,8,7, gpg1..3 */
+
+		gpv7: gpv7 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpb0: gpb0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpb1: gpb1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpb2: gpb2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
+
+	serial_1: serial@14c20000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x14c20000 0x100>;
+		id = <1>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index ed04369cfa..4a49c8dcc2 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -29,6 +29,13 @@  config ARCH_EXYNOS5
 	  Cortex-A7 CPU in big.LITTLE configuration). There are multiple SoCs
 	  in this family including Exynos5250, Exynos5420 and Exynos5800.
 
+config ARCH_EXYNOS5433
+	bool "Exynos5433 SoC family"
+	select ARM64
+	help
+	  Samsung Exynos5433 SoC family are based on ARM Cortex-A57 CPU and
+	  Cortex-A53 CPU (in a big.LITTLE configuration).
+
 config ARCH_EXYNOS7
 	bool "Exynos7 SoC family"
 	select ARM64
diff --git a/arch/arm/mach-exynos/mmu-arm64.c b/arch/arm/mach-exynos/mmu-arm64.c
index 46b8169d19..a857a7318e 100644
--- a/arch/arm/mach-exynos/mmu-arm64.c
+++ b/arch/arm/mach-exynos/mmu-arm64.c
@@ -29,3 +29,27 @@  static struct mm_region exynos7420_mem_map[] = {
 
 struct mm_region *mem_map = exynos7420_mem_map;
 #endif
+
+#ifdef CONFIG_EXYNOS5433
+static struct mm_region exynos5433_mem_map[] = {
+	{
+		.virt = 0x00000000UL,
+		.phys = 0x00000000UL,
+		.size = 0x20000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		.virt = 0x20000000UL,
+		.phys = 0x20000000UL,
+		.size = 0xC0000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		/* List terminator */
+		0,
+	}
+};
+
+struct mm_region *mem_map = exynos5433_mem_map;
+#endif
diff --git a/arch/arm/mach-exynos/soc.c b/arch/arm/mach-exynos/soc.c
index 589e16c5ad..215cbb8f70 100644
--- a/arch/arm/mach-exynos/soc.c
+++ b/arch/arm/mach-exynos/soc.c
@@ -23,6 +23,9 @@  void reset_cpu(ulong addr)
 #ifdef CONFIG_CPU_V7A
 	writel(0x1, samsung_get_base_swreset());
 #endif
+#ifdef CONFIG_ARCH_EXYNOS5433
+	writel(0x1, (void *)0x105C0400);
+#endif
 }
 
 #ifndef CONFIG_SYS_DCACHE_OFF
diff --git a/drivers/gpio/s5p_gpio.c b/drivers/gpio/s5p_gpio.c
index e4b5383d0f..fcaad1c4a6 100644
--- a/drivers/gpio/s5p_gpio.c
+++ b/drivers/gpio/s5p_gpio.c
@@ -357,6 +357,7 @@  static const struct udevice_id exynos_gpio_ids[] = {
 	{ .compatible = "samsung,exynos4x12-pinctrl" },
 	{ .compatible = "samsung,exynos5250-pinctrl" },
 	{ .compatible = "samsung,exynos5420-pinctrl" },
+	{ .compatible = "samsung,exynos5433-pinctrl" },
 	{ }
 };
 
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 94c0f1ff82..6438686fc4 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -571,6 +571,7 @@  CONFIG_EXYNOS4210
 CONFIG_EXYNOS5
 CONFIG_EXYNOS5250
 CONFIG_EXYNOS5420
+CONFIG_EXYNOS5433
 CONFIG_EXYNOS5_DT
 CONFIG_EXYNOS7420
 CONFIG_EXYNOS_ACE_SHA