[08/14] dt-bindings: serial: Add Milbeaut M10V serial description

Message ID 1542589274-13878-9-git-send-email-sugaya.taichi@socionext.com
State New
Headers show
Series
  • Add basic support for Socionext Milbeaut M10V SoCs
Related show

Commit Message

Sugaya, Taichi Nov. 19, 2018, 1:01 a.m.
Add DT bindings document for Milbeaut M10V serial.

Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>

---
 .../devicetree/bindings/serial/milbeaut-uart.txt   | 23 ++++++++++++++++++++++
 1 file changed, 23 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/serial/milbeaut-uart.txt

-- 
1.9.1

Patch

diff --git a/Documentation/devicetree/bindings/serial/milbeaut-uart.txt b/Documentation/devicetree/bindings/serial/milbeaut-uart.txt
new file mode 100644
index 0000000..19d1480
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/milbeaut-uart.txt
@@ -0,0 +1,23 @@ 
+Socionext Milbeaut UART controller
+
+Required properties:
+- index: must be 0
+- compatible: should be "socionext,milbeaut-m10v-usio-uart".
+- reg: offset and length of the register set for the device.
+- interrupts: two interrupts specifier.
+- clocks: phandle to the input clock.
+- interrupt-names: should be "rx", "tx".
+
+Optional properties:
+- uart-flow-enable: flow control enable.
+
+Example:
+	usio1: usio_uart@1e700010 {
+		index = <0>;
+		compatible = "socionext,milbeaut-m10v-usio-uart";
+		reg = <0x1e700010 0x10>;
+		interrupts = <0 141 0x4>, <0 149 0x4>;
+		interrupt-names = "rx", "tx";
+		clocks = <&hclk>;
+		uart-flow-enable;
+	};