diff mbox series

[v2,2/4] drivers: thermal: tsens: Add generic support for TSENS v1 IP

Message ID 503c279da72905b601f0f66ad6ab74b2affe0265.1542629810.git.amit.kucheria@linaro.org
State New
Headers show
Series [v2,1/4] dt: thermal: tsens: Add bindings for qcs404 | expand

Commit Message

Amit Kucheria Nov. 19, 2018, 12:25 p.m. UTC
qcs404 has a single TSENS IP block with 10 sensors. It uses version 1.4
of the TSENS IP, functionality for which is encapsulated inside
qcom,tsens-v1 compatible.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>

Reviewed-by: Vinod Koul <vkoul@kernel.org>

Tested-by: Vinod Koul <vkoul@kernel.org>

---
 drivers/thermal/qcom/Makefile   |   2 +-
 drivers/thermal/qcom/tsens-v1.c | 196 ++++++++++++++++++++++++++++++++
 drivers/thermal/qcom/tsens.c    |   3 +
 drivers/thermal/qcom/tsens.h    |   2 +-
 4 files changed, 201 insertions(+), 2 deletions(-)
 create mode 100644 drivers/thermal/qcom/tsens-v1.c

-- 
2.17.1
diff mbox series

Patch

diff --git a/drivers/thermal/qcom/Makefile b/drivers/thermal/qcom/Makefile
index a821929ede0bd..60269ee90c434 100644
--- a/drivers/thermal/qcom/Makefile
+++ b/drivers/thermal/qcom/Makefile
@@ -1,2 +1,2 @@ 
 obj-$(CONFIG_QCOM_TSENS)	+= qcom_tsens.o
-qcom_tsens-y			+= tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o tsens-v2.o
+qcom_tsens-y			+= tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o tsens-v2.o tsens-v1.o
diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c
new file mode 100644
index 0000000000000..00186b2f82808
--- /dev/null
+++ b/drivers/thermal/qcom/tsens-v1.c
@@ -0,0 +1,196 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018, Linaro Limited
+ */
+
+#include <linux/regmap.h>
+#include <linux/bitops.h>
+#include "tsens.h"
+
+/* eeprom layout data for qcs404 (v1) */
+#define BASE0_MASK	0x000007f8
+#define BASE1_MASK	0x0007f800
+#define BASE0_SHIFT	3
+#define BASE1_SHIFT	11
+
+#define S0_P1_MASK	0x0000003f
+#define S1_P1_MASK	0x0003f000
+#define S2_P1_MASK	0x3f000000
+#define S3_P1_MASK	0x000003f0
+#define S4_P1_MASK	0x003f0000
+#define S5_P1_MASK	0x0000003f
+#define S6_P1_MASK	0x0003f000
+#define S7_P1_MASK	0x3f000000
+#define S8_P1_MASK	0x000003f0
+#define S9_P1_MASK	0x003f0000
+
+#define S0_P2_MASK	0x00000fc0
+#define S1_P2_MASK	0x00fc0000
+#define S2_P2_MASK_1_0	0xc0000000
+#define S2_P2_MASK_5_2	0x0000000f
+#define S3_P2_MASK	0x0000fc00
+#define S4_P2_MASK	0x0fc00000
+#define S5_P2_MASK	0x00000fc0
+#define S6_P2_MASK	0x00fc0000
+#define S7_P2_MASK_1_0	0xc0000000
+#define S7_P2_MASK_5_2	0x0000000f
+#define S8_P2_MASK	0x0000fc00
+#define S9_P2_MASK	0x0fc00000
+
+#define S0_P1_SHIFT	0
+#define S0_P2_SHIFT	6
+#define S1_P1_SHIFT	12
+#define S1_P2_SHIFT	18
+#define S2_P1_SHIFT	24
+#define S2_P2_SHIFT_1_0	30
+
+#define S2_P2_SHIFT_5_2	0
+#define S3_P1_SHIFT	4
+#define S3_P2_SHIFT	10
+#define S4_P1_SHIFT	16
+#define S4_P2_SHIFT	22
+
+#define S5_P1_SHIFT	0
+#define S5_P2_SHIFT	6
+#define S6_P1_SHIFT	12
+#define S6_P2_SHIFT	18
+#define S7_P1_SHIFT	24
+#define S7_P2_SHIFT_1_0	30
+
+#define S7_P2_SHIFT_5_2	0
+#define S8_P1_SHIFT	4
+#define S8_P2_SHIFT	10
+#define S9_P1_SHIFT	16
+#define S9_P2_SHIFT	22
+
+#define CAL_SEL_MASK	7
+#define CAL_SEL_SHIFT	0
+
+static int calibrate_v1(struct tsens_device *tmdev)
+{
+	u32 base0 = 0, base1 = 0;
+	u32 p1[10], p2[10];
+	u32 mode = 0, lsb = 0, msb = 0;
+	u32 *qfprom_cdata;
+	int i;
+
+	qfprom_cdata = (u32 *)qfprom_read(tmdev->dev, "calib");
+	if (IS_ERR(qfprom_cdata))
+		return PTR_ERR(qfprom_cdata);
+
+	mode = (qfprom_cdata[4] & CAL_SEL_MASK) >> CAL_SEL_SHIFT;
+	dev_dbg(tmdev->dev, "calibration mode is %d\n", mode);
+
+	switch (mode) {
+	case TWO_PT_CALIB:
+		base1 = (qfprom_cdata[4] & BASE1_MASK) >> BASE1_SHIFT;
+		p2[0] = (qfprom_cdata[0] & S0_P2_MASK) >> S0_P2_SHIFT;
+		p2[1] = (qfprom_cdata[0] & S1_P2_MASK) >> S1_P2_SHIFT;
+		/* This value is split over two registers, 2 bits and 4 bits */
+		lsb   = (qfprom_cdata[0] & S2_P2_MASK_1_0) >> S2_P2_SHIFT_1_0;
+		msb   = (qfprom_cdata[1] & S2_P2_MASK_5_2) >> S2_P2_SHIFT_5_2;
+		p2[2] = msb << 2 | lsb;
+		p2[3] = (qfprom_cdata[1] & S3_P2_MASK) >> S3_P2_SHIFT;
+		p2[4] = (qfprom_cdata[1] & S4_P2_MASK) >> S4_P2_SHIFT;
+		p2[5] = (qfprom_cdata[2] & S5_P2_MASK) >> S5_P2_SHIFT;
+		p2[6] = (qfprom_cdata[2] & S6_P2_MASK) >> S6_P2_SHIFT;
+		/* This value is split over two registers, 2 bits and 4 bits */
+		lsb   = (qfprom_cdata[2] & S7_P2_MASK_1_0) >> S7_P2_SHIFT_1_0;
+		msb   = (qfprom_cdata[3] & S7_P2_MASK_5_2) >> S7_P2_SHIFT_5_2;
+		p2[7] = msb << 2 | lsb;
+		p2[8] = (qfprom_cdata[3] & S8_P2_MASK) >> S8_P2_SHIFT;
+		p2[9] = (qfprom_cdata[3] & S9_P2_MASK) >> S9_P2_SHIFT;
+		for (i = 0; i < tmdev->num_sensors; i++)
+			p2[i] = ((base1 + p2[i]) << 2);
+		/* Fall through */
+	case ONE_PT_CALIB2:
+		base0 = (qfprom_cdata[4] & BASE0_MASK) >> BASE0_SHIFT;
+		p1[0] = (qfprom_cdata[0] & S0_P1_MASK) >> S0_P1_SHIFT;
+		p1[1] = (qfprom_cdata[0] & S1_P1_MASK) >> S1_P1_SHIFT;
+		p1[2] = (qfprom_cdata[0] & S2_P1_MASK) >> S2_P1_SHIFT;
+		p1[3] = (qfprom_cdata[1] & S3_P1_MASK) >> S3_P1_SHIFT;
+		p1[4] = (qfprom_cdata[1] & S4_P1_MASK) >> S4_P1_SHIFT;
+		p1[5] = (qfprom_cdata[2] & S5_P1_MASK) >> S5_P1_SHIFT;
+		p1[6] = (qfprom_cdata[2] & S6_P1_MASK) >> S6_P1_SHIFT;
+		p1[7] = (qfprom_cdata[2] & S7_P1_MASK) >> S7_P1_SHIFT;
+		p1[8] = (qfprom_cdata[3] & S8_P1_MASK) >> S8_P1_SHIFT;
+		p1[9] = (qfprom_cdata[3] & S9_P1_MASK) >> S9_P1_SHIFT;
+		for (i = 0; i < tmdev->num_sensors; i++)
+			p1[i] = (((base0) + p1[i]) << 2);
+		break;
+	default:
+		for (i = 0; i < tmdev->num_sensors; i++) {
+			p1[i] = 500;
+			p2[i] = 780;
+		}
+		break;
+	}
+
+	compute_intercept_slope(tmdev, p1, p2, mode);
+
+	return 0;
+}
+
+#define STATUS_OFFSET		0x44
+#define LAST_TEMP_MASK		0x3ff
+#define STATUS_VALID_BIT	BIT(14)
+
+static int get_temp_tsens_v1(struct tsens_device *tmdev, int id, int *temp)
+{
+	struct tsens_sensor *s = &tmdev->sensor[id];
+	u32 code;
+	unsigned int status_reg;
+	u32 last_temp = 0, last_temp2 = 0, last_temp3 = 0;
+	int ret;
+
+	status_reg = tmdev->tm_offset + STATUS_OFFSET + s->hw_id * 4;
+	ret = regmap_read(tmdev->tm_map, status_reg, &code);
+	if (ret)
+		return ret;
+	last_temp = code & LAST_TEMP_MASK;
+	if (code & STATUS_VALID_BIT)
+		goto done;
+
+	/* Try a second time */
+	ret = regmap_read(tmdev->tm_map, status_reg, &code);
+	if (ret)
+		return ret;
+	if (code & STATUS_VALID_BIT) {
+		last_temp = code & LAST_TEMP_MASK;
+		goto done;
+	} else {
+		last_temp2 = code & LAST_TEMP_MASK;
+	}
+
+	/* Try a third/last time */
+	ret = regmap_read(tmdev->tm_map, status_reg, &code);
+	if (ret)
+		return ret;
+	if (code & STATUS_VALID_BIT) {
+		last_temp = code & LAST_TEMP_MASK;
+		goto done;
+	} else {
+		last_temp3 = code & LAST_TEMP_MASK;
+	}
+
+	if (last_temp == last_temp2)
+		last_temp = last_temp2;
+	else if (last_temp2 == last_temp3)
+		last_temp = last_temp3;
+done:
+	/* Convert temperature from deciCelsius to milliCelsius */
+	*temp = sign_extend32(last_temp, fls(LAST_TEMP_MASK) - 1) * 100;
+
+	return 0;
+}
+
+static const struct tsens_ops ops_generic_v1 = {
+	.init		= init_common,
+	.calibrate	= calibrate_v1,
+	.get_temp	= get_temp_tsens_v1,
+};
+
+const struct tsens_data data_tsens_v1 = {
+	.ops		= &ops_generic_v1,
+	.reg_offsets	= { [SROT_CTRL_OFFSET] = 0x4 },
+};
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index f1ec9bbe4717e..d0cc0c09894a9 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -63,6 +63,9 @@  static const struct of_device_id tsens_table[] = {
 	}, {
 		.compatible = "qcom,msm8996-tsens",
 		.data = &data_8996,
+	}, {
+		.compatible = "qcom,tsens-v1",
+		.data = &data_tsens_v1,
 	}, {
 		.compatible = "qcom,tsens-v2",
 		.data = &data_tsens_v2,
diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
index 7b7feee5dc463..7060c22ea611b 100644
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -92,7 +92,7 @@  int init_common(struct tsens_device *);
 int get_temp_common(struct tsens_device *, int, int *);
 
 /* TSENS v1 targets */
-extern const struct tsens_data data_8916, data_8974, data_8960;
+extern const struct tsens_data data_8916, data_8974, data_8960, data_tsens_v1;
 /* TSENS v2 targets */
 extern const struct tsens_data data_8996, data_tsens_v2;