diff mbox series

[v2,05/19] board: amlogic: factorise gxbb boards

Message ID 20181122090740.29739-6-narmstrong@baylibre.com
State Accepted
Commit d54e03b612e4e8dcb406b95a8a6a2f8fd7fb055b
Headers show
Series [v2,01/19] ARM: meson: clean-up platform selection | expand

Commit Message

Neil Armstrong Nov. 22, 2018, 9:07 a.m. UTC 
From: Jerome Brunet <jbrunet@baylibre.com>

The nanopi-k2 and the odroid-c2 are similar enough to be supported
by the same u-boot board. This change use odroid-c2 u-boot board
for the nanopi-k2 as well. Dedicated defconfig are kept to customize
the names and device tree.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm/mach-meson/Kconfig                   | 11 +---
 board/amlogic/nanopi-k2/Kconfig               | 12 ----
 board/amlogic/nanopi-k2/MAINTAINERS           |  6 --
 board/amlogic/nanopi-k2/Makefile              |  7 ---
 board/amlogic/nanopi-k2/nanopi-k2.c           | 55 -------------------
 board/amlogic/odroid-c2/MAINTAINERS           |  1 +
 .../README => odroid-c2/README.nanopi-k2}     |  0
 .../odroid-c2/{README => README.odroid-c2}    |  0
 configs/nanopi-k2_defconfig                   |  2 +-
 9 files changed, 3 insertions(+), 91 deletions(-)
 delete mode 100644 board/amlogic/nanopi-k2/Kconfig
 delete mode 100644 board/amlogic/nanopi-k2/MAINTAINERS
 delete mode 100644 board/amlogic/nanopi-k2/Makefile
 delete mode 100644 board/amlogic/nanopi-k2/nanopi-k2.c
 rename board/amlogic/{nanopi-k2/README => odroid-c2/README.nanopi-k2} (100%)
 rename board/amlogic/odroid-c2/{README => README.odroid-c2} (100%)
diff mbox series

Patch

diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig
index 98303dbda1..d86b1bed78 100644
--- a/arch/arm/mach-meson/Kconfig
+++ b/arch/arm/mach-meson/Kconfig
@@ -31,14 +31,7 @@  config TARGET_ODROID_C2
 	  ODROID-C2 is a single board computer based on Meson GXBaby
 	  with 2 GiB of RAM, Gigabit Ethernet, HDMI, 4 USB, micro-SD
 	  slot, eMMC, IR receiver and a 40-pin GPIO header.
-
-config TARGET_NANOPI_K2
-	bool "NANOPI_K2"
-	select MESON_GXBB
-	help
-	  NANOPI_K2 is a single board computer based on Meson GXBaby
-	  with 2 GiB of RAM, Gigabit Ethernet,AP6212 Wifi, HDMI, 4 USB,
-	  micro-SD slot, eMMC, IR receiver and a 40-pin GPIO header.
+	  You should also select this TARGET if you have an nanopi-k2
 
 config TARGET_P212
 	bool "P212"
@@ -69,8 +62,6 @@  config SYS_MALLOC_F_LEN
 
 source "board/amlogic/odroid-c2/Kconfig"
 
-source "board/amlogic/nanopi-k2/Kconfig"
-
 source "board/amlogic/p212/Kconfig"
 
 source "board/amlogic/q200/Kconfig"
diff --git a/board/amlogic/nanopi-k2/Kconfig b/board/amlogic/nanopi-k2/Kconfig
deleted file mode 100644
index 374bda200c..0000000000
--- a/board/amlogic/nanopi-k2/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@ 
-if TARGET_NANOPI_K2
-
-config SYS_BOARD
-	default "nanopi-k2"
-
-config SYS_VENDOR
-	default "amlogic"
-
-config SYS_CONFIG_NAME
-	default "nanopi-k2"
-
-endif
diff --git a/board/amlogic/nanopi-k2/MAINTAINERS b/board/amlogic/nanopi-k2/MAINTAINERS
deleted file mode 100644
index 0452bd1fa1..0000000000
--- a/board/amlogic/nanopi-k2/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@ 
-NANOPI-K2
-M:	Neil Armstrong <narmstrong@baylibre.com>
-S:	Maintained
-F:	board/amlogic/nanopi-k2/
-F:	include/configs/nanopi-k2.h
-F:	configs/nanopi-k2_defconfig
diff --git a/board/amlogic/nanopi-k2/Makefile b/board/amlogic/nanopi-k2/Makefile
deleted file mode 100644
index 7d9b666e76..0000000000
--- a/board/amlogic/nanopi-k2/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@ 
-#
-# (C) Copyright 2018 Thomas McKahan
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= nanopi-k2.o
diff --git a/board/amlogic/nanopi-k2/nanopi-k2.c b/board/amlogic/nanopi-k2/nanopi-k2.c
deleted file mode 100644
index ae29dd6fa4..0000000000
--- a/board/amlogic/nanopi-k2/nanopi-k2.c
+++ /dev/null
@@ -1,55 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2018 Thomas McKahan
- */
-
-#include <common.h>
-#include <dm.h>
-#include <environment.h>
-#include <asm/io.h>
-#include <asm/arch/gx.h>
-#include <asm/arch/sm.h>
-#include <asm/arch/eth.h>
-#include <asm/arch/mem.h>
-
-#define EFUSE_SN_OFFSET		20
-#define EFUSE_SN_SIZE		16
-#define EFUSE_MAC_OFFSET	52
-#define EFUSE_MAC_SIZE		6
-
-int board_init(void)
-{
-	return 0;
-}
-
-int misc_init_r(void)
-{
-	u8 mac_addr[EFUSE_MAC_SIZE];
-	char serial[EFUSE_SN_SIZE];
-	ssize_t len;
-
-	meson_gx_eth_init(PHY_INTERFACE_MODE_RGMII, 0);
-
-	if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
-		len = meson_sm_read_efuse(EFUSE_MAC_OFFSET,
-					  mac_addr, EFUSE_MAC_SIZE);
-		if (len == EFUSE_MAC_SIZE && is_valid_ethaddr(mac_addr))
-			eth_env_set_enetaddr("ethaddr", mac_addr);
-	}
-
-	if (!env_get("serial#")) {
-		len = meson_sm_read_efuse(EFUSE_SN_OFFSET, serial,
-			EFUSE_SN_SIZE);
-		if (len == EFUSE_SN_SIZE)
-			env_set("serial#", serial);
-	}
-
-	return 0;
-}
-
-int ft_board_setup(void *blob, bd_t *bd)
-{
-	meson_gx_init_reserved_memory(blob);
-
-	return 0;
-}
diff --git a/board/amlogic/odroid-c2/MAINTAINERS b/board/amlogic/odroid-c2/MAINTAINERS
index 699850fd0c..fd74d53bfe 100644
--- a/board/amlogic/odroid-c2/MAINTAINERS
+++ b/board/amlogic/odroid-c2/MAINTAINERS
@@ -1,5 +1,6 @@ 
 ODROID-C2
 M:	Beniamino Galvani <b.galvani@gmail.com>
+M:	Neil Armstrong <narmstrong@baylibre.com>
 S:	Maintained
 F:	board/amlogic/odroid-c2/
 F:	include/configs/odroid-c2.h
diff --git a/board/amlogic/nanopi-k2/README b/board/amlogic/odroid-c2/README.nanopi-k2
similarity index 100%
rename from board/amlogic/nanopi-k2/README
rename to board/amlogic/odroid-c2/README.nanopi-k2
diff --git a/board/amlogic/odroid-c2/README b/board/amlogic/odroid-c2/README.odroid-c2
similarity index 100%
rename from board/amlogic/odroid-c2/README
rename to board/amlogic/odroid-c2/README.odroid-c2
diff --git a/configs/nanopi-k2_defconfig b/configs/nanopi-k2_defconfig
index 5c8c747bf3..01196d6655 100644
--- a/configs/nanopi-k2_defconfig
+++ b/configs/nanopi-k2_defconfig
@@ -2,7 +2,7 @@  CONFIG_ARM=y
 CONFIG_ARCH_MESON=y
 CONFIG_SYS_TEXT_BASE=0x01000000
 CONFIG_MESON_GXBB=y
-CONFIG_TARGET_NANOPI_K2=y
+CONFIG_TARGET_ODROID_C2=y
 CONFIG_DEBUG_UART_BASE=0xc81004c0
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_IDENT_STRING=" nanopi-k2"