diff mbox series

[for-4.9.y,01/10] ath10k: fix kernel panic due to race in accessing arvif list

Message ID 1543416004-1547-2-git-send-email-amit.pundir@linaro.org
State New
Headers show
Series Stable candidates for linux-4.9.y | expand

Commit Message

Amit Pundir Nov. 28, 2018, 2:39 p.m. UTC
From: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>


commit ebaa4b1620bf69f2bc43cb45ea85fbafdaec23c3 upstream.

arvifs list is traversed within data_lock spin_lock in tasklet
context to fill channel information from the corresponding vif.
This means any access to arvifs list for add/del operations
should also be protected with the same spin_lock to avoid the
race. Fix this by performing list add/del on arvfis within the
data_lock. This could fix kernel panic something like the below.

 LR is at ath10k_htt_rx_pktlog_completion_handler+0x100/0xb6c [ath10k_core]
 PC is at ath10k_htt_rx_pktlog_completion_handler+0x1c0/0xb6c [ath10k_core]
 Internal error: Oops: 17 [#1] PREEMPT SMP ARM
 [<bf4857f4>] (ath10k_htt_rx_pktlog_completion_handler+0x2f4/0xb6c [ath10k_core])
 [<bf487540>] (ath10k_htt_txrx_compl_task+0x8b4/0x1188 [ath10k_core])
 [<c00312d4>] (tasklet_action+0x8c/0xec)
 [<c00309a8>] (__do_softirq+0xdc/0x208)
 [<c0030d6c>] (irq_exit+0x84/0xe0)
 [<c005db04>] (__handle_domain_irq+0x80/0xa0)
 [<c00085c4>] (gic_handle_irq+0x38/0x5c)
 [<c0009640>] (__irq_svc+0x40/0x74)

(gdb) list *(ath10k_htt_rx_pktlog_completion_handler+0x1c0)
0x136c0 is in ath10k_htt_rx_h_channel (drivers/net/wireless/ath/ath10k/htt_rx.c:769)
764		struct cfg80211_chan_def def;
765
766		lockdep_assert_held(&ar->data_lock);
767
768		list_for_each_entry(arvif, &ar->arvifs, list) {
769			if (arvif->vdev_id == vdev_id &&
770			    ath10k_mac_vif_chan(arvif->vif, &def) == 0)
771				return def.chan;
772		}
773

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

Signed-off-by: Amit Pundir <amit.pundir@linaro.org>

---
 drivers/net/wireless/ath/ath10k/mac.c | 6 ++++++
 1 file changed, 6 insertions(+)

-- 
2.7.4
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 5fe6841b8889..fb632a454fc2 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -4967,7 +4967,9 @@  static int ath10k_add_interface(struct ieee80211_hw *hw,
 	}
 
 	ar->free_vdev_map &= ~(1LL << arvif->vdev_id);
+	spin_lock_bh(&ar->data_lock);
 	list_add(&arvif->list, &ar->arvifs);
+	spin_unlock_bh(&ar->data_lock);
 
 	/* It makes no sense to have firmware do keepalives. mac80211 already
 	 * takes care of this with idle connection polling.
@@ -5118,7 +5120,9 @@  static int ath10k_add_interface(struct ieee80211_hw *hw,
 err_vdev_delete:
 	ath10k_wmi_vdev_delete(ar, arvif->vdev_id);
 	ar->free_vdev_map |= 1LL << arvif->vdev_id;
+	spin_lock_bh(&ar->data_lock);
 	list_del(&arvif->list);
+	spin_unlock_bh(&ar->data_lock);
 
 err:
 	if (arvif->beacon_buf) {
@@ -5164,7 +5168,9 @@  static void ath10k_remove_interface(struct ieee80211_hw *hw,
 			    arvif->vdev_id, ret);
 
 	ar->free_vdev_map |= 1LL << arvif->vdev_id;
+	spin_lock_bh(&ar->data_lock);
 	list_del(&arvif->list);
+	spin_unlock_bh(&ar->data_lock);
 
 	if (arvif->vdev_type == WMI_VDEV_TYPE_AP ||
 	    arvif->vdev_type == WMI_VDEV_TYPE_IBSS) {