diff mbox series

[v2,2/3] clk: qcom: gcc-msm8998: Disable halt check of UFS clocks

Message ID 20181203183330.2073-3-bjorn.andersson@linaro.org
State Accepted
Commit 2abf856202fd3e4883e4c518acaa9a023b0dbe54
Headers show
Series None | expand

Commit Message

Bjorn Andersson Dec. 3, 2018, 6:33 p.m. UTC 
Drop the halt check of the UFS symbol clocks, in accordance with other
platforms. This makes clk_disable_unused() happy and makes it possible
to turn the clocks on again without an error.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

---

Changes since v1:
- None

 drivers/clk/qcom/gcc-msm8998.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

-- 
2.18.0

Comments

Stephen Boyd Dec. 5, 2018, 11:58 p.m. UTC | #1 
Quoting Bjorn Andersson (2018-12-03 10:33:29)
> Drop the halt check of the UFS symbol clocks, in accordance with other

> platforms. This makes clk_disable_unused() happy and makes it possible

> to turn the clocks on again without an error.

> 

> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

> ---


Applied to clk-next
diff mbox series

Patch

diff --git a/drivers/clk/qcom/gcc-msm8998.c b/drivers/clk/qcom/gcc-msm8998.c
index aed7f1f92614..792b431f9945 100644
--- a/drivers/clk/qcom/gcc-msm8998.c
+++ b/drivers/clk/qcom/gcc-msm8998.c
@@ -2375,7 +2375,7 @@  static struct clk_branch gcc_ufs_phy_aux_clk = {
 
 static struct clk_branch gcc_ufs_rx_symbol_0_clk = {
 	.halt_reg = 0x75014,
-	.halt_check = BRANCH_HALT,
+	.halt_check = BRANCH_HALT_SKIP,
 	.clkr = {
 		.enable_reg = 0x75014,
 		.enable_mask = BIT(0),
@@ -2388,7 +2388,7 @@  static struct clk_branch gcc_ufs_rx_symbol_0_clk = {
 
 static struct clk_branch gcc_ufs_rx_symbol_1_clk = {
 	.halt_reg = 0x7605c,
-	.halt_check = BRANCH_HALT,
+	.halt_check = BRANCH_HALT_SKIP,
 	.clkr = {
 		.enable_reg = 0x7605c,
 		.enable_mask = BIT(0),
@@ -2401,7 +2401,7 @@  static struct clk_branch gcc_ufs_rx_symbol_1_clk = {
 
 static struct clk_branch gcc_ufs_tx_symbol_0_clk = {
 	.halt_reg = 0x75010,
-	.halt_check = BRANCH_HALT,
+	.halt_check = BRANCH_HALT_SKIP,
 	.clkr = {
 		.enable_reg = 0x75010,
 		.enable_mask = BIT(0),