diff mbox

[V3,2/8] USB: EHCI: make ehci-atmel a separate driver

Message ID 1363545104-1677-3-git-send-email-manjunath.goudar@linaro.org
State New
Headers show

Commit Message

manjunath.goudar@linaro.org March 17, 2013, 6:31 p.m. UTC
Separate the Atmel host controller driver from ehci-hcd host code
so that it can be built as a separate driver module.
This work is part of enabling multi-platform kernels on ARM;
however, note that other changes are still needed before Atmel can be
booted with a multi-platform kernel.

With the infrastructure added by Alan Stern in patch 3e0232039
"USB: EHCI: prepare to make ehci-hcd a library module", we can
avoid this problem by turning a bus glue into a separate
module, as we do here for the Atmel bus glue.

In V3:
1.Detail commit message added here,why this patch is required.
2.Replaced hcd_name string "ehci-atmel" to "atmel-ehci".
3.In Makefile inserted Blank line that separates the EHCI drivers from the following non-EHCI drivers.
4.Export ehci_shutdown symbol as it is needed by the Atmel driver.

In V2:
Resolved below compiler error.
drivers/usb/host/ehci-atmel.c: In function 'ehci_atmel_drv_remove':
drivers/usb/host/ehci-atmel.c:167: error: implicit declaration of function 'ehci_shutdown'

Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Greg KH <greg@kroah.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Andrew Victor <linux@maxim.org.za>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: linux-usb@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
 drivers/usb/host/Kconfig      |    8 +++++
 drivers/usb/host/Makefile     |    1 +
 drivers/usb/host/ehci-atmel.c |   74 ++++++++++++++++++++++-------------------
 drivers/usb/host/ehci-hcd.c   |    9 ++---
 drivers/usb/host/ehci.h       |    1 +
 5 files changed, 52 insertions(+), 41 deletions(-)
diff mbox

Patch

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index cd4fdac..1eb96c0 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -170,6 +170,14 @@  config USB_EHCI_HCD_SPEAR
           Enables support for the on-chip EHCI controller on
           ST SPEAr chips.
 
+config USB_EHCI_HCD_AT91
+        tristate  "Support for Atmel on-chip EHCI USB controller"
+        depends on USB_EHCI_HCD && ARCH_AT91
+        default y
+        ---help---
+          Enables support for the on-chip EHCI controller on
+          Atmel chips.
+
 config USB_EHCI_MSM
 	bool "Support for MSM on-chip EHCI USB controller"
 	depends on USB_EHCI_HCD && ARCH_MSM
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 8da680d..7e40be2 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -28,6 +28,7 @@  obj-$(CONFIG_USB_EHCI_PCI)	+= ehci-pci.o
 obj-$(CONFIG_USB_EHCI_HCD_PLATFORM)	+= ehci-platform.o
 obj-$(CONFIG_USB_EHCI_MXC)	+= ehci-mxc.o
 obj-$(CONFIG_USB_EHCI_HCD_SPEAR)	+= ehci-spear.o
+obj-$(CONFIG_USB_EHCI_HCD_AT91) += ehci-atmel.o
 
 obj-$(CONFIG_USB_OXU210HP_HCD)	+= oxu210hp-hcd.o
 obj-$(CONFIG_USB_ISP116X_HCD)	+= isp116x-hcd.o
diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c
index f3beac4..d53881d 100644
--- a/drivers/usb/host/ehci-atmel.c
+++ b/drivers/usb/host/ehci-atmel.c
@@ -15,6 +15,19 @@ 
 #include <linux/platform_device.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+
+#include "ehci.h"
+
+#define DRIVER_DESC "EHCI atmel driver"
+
+static const char hcd_name[] = "ehci-atmel";
+static struct hc_driver __read_mostly ehci_atmel_hc_driver;
 
 /* interface and function clocks */
 static struct clk *iclk, *fclk;
@@ -60,41 +73,6 @@  static int ehci_atmel_setup(struct usb_hcd *hcd)
 	return ehci_setup(hcd);
 }
 
-static const struct hc_driver ehci_atmel_hc_driver = {
-	.description		= hcd_name,
-	.product_desc		= "Atmel EHCI UHP HS",
-	.hcd_priv_size		= sizeof(struct ehci_hcd),
-
-	/* generic hardware linkage */
-	.irq			= ehci_irq,
-	.flags			= HCD_MEMORY | HCD_USB2,
-
-	/* basic lifecycle operations */
-	.reset			= ehci_atmel_setup,
-	.start			= ehci_run,
-	.stop			= ehci_stop,
-	.shutdown		= ehci_shutdown,
-
-	/* managing i/o requests and associated device resources */
-	.urb_enqueue		= ehci_urb_enqueue,
-	.urb_dequeue		= ehci_urb_dequeue,
-	.endpoint_disable	= ehci_endpoint_disable,
-	.endpoint_reset		= ehci_endpoint_reset,
-
-	/* scheduling support */
-	.get_frame_number	= ehci_get_frame,
-
-	/* root hub support */
-	.hub_status_data	= ehci_hub_status_data,
-	.hub_control		= ehci_hub_control,
-	.bus_suspend		= ehci_bus_suspend,
-	.bus_resume		= ehci_bus_resume,
-	.relinquish_port	= ehci_relinquish_port,
-	.port_handed_over	= ehci_port_handed_over,
-
-	.clear_tt_buffer_complete	= ehci_clear_tt_buffer_complete,
-};
-
 static u64 at91_ehci_dma_mask = DMA_BIT_MASK(32);
 
 static int ehci_atmel_drv_probe(struct platform_device *pdev)
@@ -213,3 +191,29 @@  static struct platform_driver ehci_atmel_driver = {
 		.of_match_table	= of_match_ptr(atmel_ehci_dt_ids),
 	},
 };
+
+static const struct ehci_driver_overrides atmel_overrides __initdata = {
+	.reset = ehci_atmel_setup,
+};
+
+static int __init ehci_atmel_init(void)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	pr_info("%s: " DRIVER_DESC "\n", hcd_name);
+	ehci_init_driver(&ehci_atmel_hc_driver, &atmel_overrides);
+	return platform_driver_register(&ehci_atmel_driver);
+}
+module_init(ehci_atmel_init);
+
+static void __exit ehci_atmel_cleanup(void)
+{
+	platform_driver_unregister(&ehci_atmel_driver);
+}
+module_exit(ehci_atmel_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_ALIAS("platform:atmel-ehci");
+MODULE_AUTHOR("Nicolas Ferre");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index c4afd86..7db559d 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -352,7 +352,7 @@  static void ehci_silence_controller(struct ehci_hcd *ehci)
  * This forcibly disables dma and IRQs, helping kexec and other cases
  * where the next system software may expect clean state.
  */
-static void ehci_shutdown(struct usb_hcd *hcd)
+void ehci_shutdown(struct usb_hcd *hcd)
 {
 	struct ehci_hcd	*ehci = hcd_to_ehci(hcd);
 
@@ -366,6 +366,7 @@  static void ehci_shutdown(struct usb_hcd *hcd)
 
 	hrtimer_cancel(&ehci->hrtimer);
 }
+EXPORT_SYMBOL_GPL(ehci_shutdown);
 
 /*-------------------------------------------------------------------------*/
 
@@ -1282,11 +1283,6 @@  MODULE_LICENSE ("GPL");
 #define	PLATFORM_DRIVER		ehci_hcd_w90x900_driver
 #endif
 
-#ifdef CONFIG_ARCH_AT91
-#include "ehci-atmel.c"
-#define	PLATFORM_DRIVER		ehci_atmel_driver
-#endif
-
 #ifdef CONFIG_USB_OCTEON_EHCI
 #include "ehci-octeon.c"
 #define PLATFORM_DRIVER		ehci_octeon_driver
@@ -1342,6 +1338,7 @@  MODULE_LICENSE ("GPL");
 	!IS_ENABLED(CONFIG_USB_CHIPIDEA_HOST) && \
 	!IS_ENABLED(CONFIG_USB_EHCI_MXC) && \
 	!IS_ENABLED(CONFIG_PLAT_SPEAR) && \
+	!IS_ENABLED(CONFIG_ARCH_AT91) && \
 	!defined(PLATFORM_DRIVER) && \
 	!defined(PS3_SYSTEM_BUS_DRIVER) && \
 	!defined(OF_PLATFORM_DRIVER) && \
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 36c3a82..139c932 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -798,6 +798,7 @@  struct ehci_driver_overrides {
 extern void	ehci_init_driver(struct hc_driver *drv,
 				const struct ehci_driver_overrides *over);
 extern int	ehci_setup(struct usb_hcd *hcd);
+extern void	ehci_shutdown(struct usb_hcd *hcd);
 
 #ifdef CONFIG_PM
 extern int	ehci_suspend(struct usb_hcd *hcd, bool do_wakeup);