diff mbox series

[8/9] clk: uniphier: add NAND 200MHz clock

Message ID 1545217401-27018-9-git-send-email-yamada.masahiro@socionext.com
State Accepted
Commit 94bf34b17277c77d42ae9137262adf55143b0d48
Headers show
Series ARM: dts: uniphier: updates for v2019.01 | expand

Commit Message

Masahiro Yamada Dec. 19, 2018, 11:03 a.m. UTC 
The Denali NAND controller IP needs three clocks:

 - clk: controller core clock

 - clk_x: bus interface clock

 - ecc_clk: clock at which ECC circuitry is run

Currently, only the first one (50MHz) is provided.  The rest of the
two clock ports must be connected to the 200MHz clock line.  Add this.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---

 drivers/clk/uniphier/clk-uniphier-sys.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/clk/uniphier/clk-uniphier-sys.c b/drivers/clk/uniphier/clk-uniphier-sys.c
index 9e087b6..487b43e 100644
--- a/drivers/clk/uniphier/clk-uniphier-sys.c
+++ b/drivers/clk/uniphier/clk-uniphier-sys.c
@@ -6,13 +6,12 @@ 
 
 #include "clk-uniphier.h"
 
-/* Denali driver requires clk_x rate (clk: 50MHz, clk_x & ecc_clk: 200MHz) */
 #define UNIPHIER_LD4_SYS_CLK_NAND(_id)					\
-	UNIPHIER_CLK_RATE(128, 200000000),				\
+	UNIPHIER_CLK_RATE(128, 50000000),				\
 	UNIPHIER_CLK_GATE((_id), 128, 0x2104, 2)
 
 #define UNIPHIER_LD11_SYS_CLK_NAND(_id)					\
-	UNIPHIER_CLK_RATE(128, 200000000),				\
+	UNIPHIER_CLK_RATE(128, 50000000),				\
 	UNIPHIER_CLK_GATE((_id), 128, 0x210c, 0)
 
 const struct uniphier_clk_data uniphier_pxs2_sys_clk_data[] = {
@@ -20,6 +19,7 @@  const struct uniphier_clk_data uniphier_pxs2_sys_clk_data[] = {
     defined(CONFIG_ARCH_UNIPHIER_PRO4) || defined(CONFIG_ARCH_UNIPHIER_PRO5) ||\
     defined(CONFIG_ARCH_UNIPHIER_PXS2) || defined(CONFIG_ARCH_UNIPHIER_LD6B)
 	UNIPHIER_LD4_SYS_CLK_NAND(2),
+	UNIPHIER_CLK_RATE(3, 200000000),
 	UNIPHIER_CLK_GATE_SIMPLE(6, 0x2104, 12),	/* ether (Pro4, PXs2) */
 	UNIPHIER_CLK_GATE_SIMPLE(7, 0x2104, 5),		/* ether-gb (Pro4) */
 	UNIPHIER_CLK_GATE_SIMPLE(8, 0x2104, 10),	/* stdmac */
@@ -36,6 +36,7 @@  const struct uniphier_clk_data uniphier_pxs2_sys_clk_data[] = {
 const struct uniphier_clk_data uniphier_ld20_sys_clk_data[] = {
 #if defined(CONFIG_ARCH_UNIPHIER_LD11) || defined(CONFIG_ARCH_UNIPHIER_LD20)
 	UNIPHIER_LD11_SYS_CLK_NAND(2),
+	UNIPHIER_CLK_RATE(3, 200000000),
 	UNIPHIER_CLK_GATE_SIMPLE(6, 0x210c, 6),		/* ether */
 	UNIPHIER_CLK_GATE_SIMPLE(8, 0x210c, 8),		/* stdmac */
 	UNIPHIER_CLK_GATE_SIMPLE(14, 0x210c, 14),	/* usb30 (LD20) */
@@ -48,6 +49,7 @@  const struct uniphier_clk_data uniphier_ld20_sys_clk_data[] = {
 const struct uniphier_clk_data uniphier_pxs3_sys_clk_data[] = {
 #if defined(CONFIG_ARCH_UNIPHIER_PXS3)
 	UNIPHIER_LD11_SYS_CLK_NAND(2),
+	UNIPHIER_CLK_RATE(3, 200000000),
 	UNIPHIER_CLK_GATE_SIMPLE(6, 0x210c, 9),		/* ether0 */
 	UNIPHIER_CLK_GATE_SIMPLE(7, 0x210c, 10),	/* ether1 */
 	UNIPHIER_CLK_GATE_SIMPLE(12, 0x210c, 4),	/* usb30 (gio0) */