diff mbox series

[PATCHv2,7/7] drm/bridge: tc358767: use DP connector if no panel set

Message ID 20190103115954.12785-8-tomi.valkeinen@ti.com
State Accepted
Commit f8c15790e4d8bdf2d21a5e9d43b5f97983af1222
Headers show
Series drm/bridge: tc358767: small fixes | expand

Commit Message

Tomi Valkeinen Jan. 3, 2019, 11:59 a.m. UTC 
tc358767 driver sets the connector type always to eDP.

This patch sets the type to DP if there is no panel defined, which
implies that there's a DP connector on the board.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
---
 drivers/gpu/drm/bridge/tc358767.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
index 391547358756..e6403b9549f1 100644
--- a/drivers/gpu/drm/bridge/tc358767.c
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -1209,7 +1209,8 @@  static int tc_bridge_attach(struct drm_bridge *bridge)
 	/* Create eDP connector */
 	drm_connector_helper_add(&tc->connector, &tc_connector_helper_funcs);
 	ret = drm_connector_init(drm, &tc->connector, &tc_connector_funcs,
-				 DRM_MODE_CONNECTOR_eDP);
+				 tc->panel ? DRM_MODE_CONNECTOR_eDP :
+				 DRM_MODE_CONNECTOR_DisplayPort);
 	if (ret)
 		return ret;