diff mbox series

kconfig: rename generated .*conf-cfg to *conf-cfg

Message ID 1546657311-24661-1-git-send-email-yamada.masahiro@socionext.com
State Accepted
Commit d86271af64602e7c86c003b27f27c7216706ff96
Headers show
Series kconfig: rename generated .*conf-cfg to *conf-cfg | expand

Commit Message

Masahiro Yamada Jan. 5, 2019, 3:01 a.m. UTC
Remove the dot-prefixing since it is just a matter of the
.gitignore file.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

---

 scripts/kconfig/.gitignore |  1 +
 scripts/kconfig/Makefile   | 36 ++++++++++++++++++------------------
 2 files changed, 19 insertions(+), 18 deletions(-)

-- 
2.7.4

Comments

Masahiro Yamada Jan. 16, 2019, 2:33 p.m. UTC | #1
On Sat, Jan 5, 2019 at 12:02 PM Masahiro Yamada
<yamada.masahiro@socionext.com> wrote:
>

> Remove the dot-prefixing since it is just a matter of the

> .gitignore file.

>

> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

> ---


Applied to linux-kbuild/fixes.

>

>  scripts/kconfig/.gitignore |  1 +

>  scripts/kconfig/Makefile   | 36 ++++++++++++++++++------------------

>  2 files changed, 19 insertions(+), 18 deletions(-)

>

> diff --git a/scripts/kconfig/.gitignore b/scripts/kconfig/.gitignore

> index 0aabc1d..b5bf92f 100644

> --- a/scripts/kconfig/.gitignore

> +++ b/scripts/kconfig/.gitignore

> @@ -2,6 +2,7 @@

>  # Generated files

>  #

>  *.moc

> +*conf-cfg

>

>  #

>  # configuration programs

> diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile

> index 679e62e..c05ab00 100644

> --- a/scripts/kconfig/Makefile

> +++ b/scripts/kconfig/Makefile

> @@ -157,53 +157,53 @@ conf-objs := conf.o $(common-objs)

>  hostprogs-y    += nconf

>  nconf-objs     := nconf.o nconf.gui.o $(common-objs)

>

> -HOSTLDLIBS_nconf       = $(shell . $(obj)/.nconf-cfg && echo $$libs)

> -HOSTCFLAGS_nconf.o     = $(shell . $(obj)/.nconf-cfg && echo $$cflags)

> -HOSTCFLAGS_nconf.gui.o = $(shell . $(obj)/.nconf-cfg && echo $$cflags)

> +HOSTLDLIBS_nconf       = $(shell . $(obj)/nconf-cfg && echo $$libs)

> +HOSTCFLAGS_nconf.o     = $(shell . $(obj)/nconf-cfg && echo $$cflags)

> +HOSTCFLAGS_nconf.gui.o = $(shell . $(obj)/nconf-cfg && echo $$cflags)

>

> -$(obj)/nconf.o $(obj)/nconf.gui.o: $(obj)/.nconf-cfg

> +$(obj)/nconf.o $(obj)/nconf.gui.o: $(obj)/nconf-cfg

>

>  # mconf: Used for the menuconfig target based on lxdialog

>  hostprogs-y    += mconf

>  lxdialog       := checklist.o inputbox.o menubox.o textbox.o util.o yesno.o

>  mconf-objs     := mconf.o $(addprefix lxdialog/, $(lxdialog)) $(common-objs)

>

> -HOSTLDLIBS_mconf = $(shell . $(obj)/.mconf-cfg && echo $$libs)

> +HOSTLDLIBS_mconf = $(shell . $(obj)/mconf-cfg && echo $$libs)

>  $(foreach f, mconf.o $(lxdialog), \

> -  $(eval HOSTCFLAGS_$f = $$(shell . $(obj)/.mconf-cfg && echo $$$$cflags)))

> +  $(eval HOSTCFLAGS_$f = $$(shell . $(obj)/mconf-cfg && echo $$$$cflags)))

>

> -$(obj)/mconf.o: $(obj)/.mconf-cfg

> -$(addprefix $(obj)/lxdialog/, $(lxdialog)): $(obj)/.mconf-cfg

> +$(obj)/mconf.o: $(obj)/mconf-cfg

> +$(addprefix $(obj)/lxdialog/, $(lxdialog)): $(obj)/mconf-cfg

>

>  # qconf: Used for the xconfig target based on Qt

>  hostprogs-y    += qconf

>  qconf-cxxobjs  := qconf.o

>  qconf-objs     := images.o $(common-objs)

>

> -HOSTLDLIBS_qconf       = $(shell . $(obj)/.qconf-cfg && echo $$libs)

> -HOSTCXXFLAGS_qconf.o   = $(shell . $(obj)/.qconf-cfg && echo $$cflags)

> +HOSTLDLIBS_qconf       = $(shell . $(obj)/qconf-cfg && echo $$libs)

> +HOSTCXXFLAGS_qconf.o   = $(shell . $(obj)/qconf-cfg && echo $$cflags)

>

> -$(obj)/qconf.o: $(obj)/.qconf-cfg $(obj)/qconf.moc

> +$(obj)/qconf.o: $(obj)/qconf-cfg $(obj)/qconf.moc

>

>  quiet_cmd_moc = MOC     $@

> -      cmd_moc = $(shell . $(obj)/.qconf-cfg && echo $$moc) -i $< -o $@

> +      cmd_moc = $(shell . $(obj)/qconf-cfg && echo $$moc) -i $< -o $@

>

> -$(obj)/%.moc: $(src)/%.h $(obj)/.qconf-cfg

> +$(obj)/%.moc: $(src)/%.h $(obj)/qconf-cfg

>         $(call cmd,moc)

>

>  # gconf: Used for the gconfig target based on GTK+

>  hostprogs-y    += gconf

>  gconf-objs     := gconf.o images.o $(common-objs)

>

> -HOSTLDLIBS_gconf    = $(shell . $(obj)/.gconf-cfg && echo $$libs)

> -HOSTCFLAGS_gconf.o  = $(shell . $(obj)/.gconf-cfg && echo $$cflags)

> +HOSTLDLIBS_gconf    = $(shell . $(obj)/gconf-cfg && echo $$libs)

> +HOSTCFLAGS_gconf.o  = $(shell . $(obj)/gconf-cfg && echo $$cflags)

>

> -$(obj)/gconf.o: $(obj)/.gconf-cfg

> +$(obj)/gconf.o: $(obj)/gconf-cfg

>

>  # check if necessary packages are available, and configure build flags

>  filechk_conf_cfg = $(CONFIG_SHELL) $<

>

> -$(obj)/.%conf-cfg: $(src)/%conf-cfg.sh FORCE

> +$(obj)/%conf-cfg: $(src)/%conf-cfg.sh FORCE

>         $(call filechk,conf_cfg)

>

> -clean-files += .*conf-cfg

> +clean-files += conf-cfg

> --

> 2.7.4

>



-- 
Best Regards
Masahiro Yamada
diff mbox series

Patch

diff --git a/scripts/kconfig/.gitignore b/scripts/kconfig/.gitignore
index 0aabc1d..b5bf92f 100644
--- a/scripts/kconfig/.gitignore
+++ b/scripts/kconfig/.gitignore
@@ -2,6 +2,7 @@ 
 # Generated files
 #
 *.moc
+*conf-cfg
 
 #
 # configuration programs
diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile
index 679e62e..c05ab00 100644
--- a/scripts/kconfig/Makefile
+++ b/scripts/kconfig/Makefile
@@ -157,53 +157,53 @@  conf-objs	:= conf.o $(common-objs)
 hostprogs-y	+= nconf
 nconf-objs	:= nconf.o nconf.gui.o $(common-objs)
 
-HOSTLDLIBS_nconf	= $(shell . $(obj)/.nconf-cfg && echo $$libs)
-HOSTCFLAGS_nconf.o	= $(shell . $(obj)/.nconf-cfg && echo $$cflags)
-HOSTCFLAGS_nconf.gui.o	= $(shell . $(obj)/.nconf-cfg && echo $$cflags)
+HOSTLDLIBS_nconf	= $(shell . $(obj)/nconf-cfg && echo $$libs)
+HOSTCFLAGS_nconf.o	= $(shell . $(obj)/nconf-cfg && echo $$cflags)
+HOSTCFLAGS_nconf.gui.o	= $(shell . $(obj)/nconf-cfg && echo $$cflags)
 
-$(obj)/nconf.o $(obj)/nconf.gui.o: $(obj)/.nconf-cfg
+$(obj)/nconf.o $(obj)/nconf.gui.o: $(obj)/nconf-cfg
 
 # mconf: Used for the menuconfig target based on lxdialog
 hostprogs-y	+= mconf
 lxdialog	:= checklist.o inputbox.o menubox.o textbox.o util.o yesno.o
 mconf-objs	:= mconf.o $(addprefix lxdialog/, $(lxdialog)) $(common-objs)
 
-HOSTLDLIBS_mconf = $(shell . $(obj)/.mconf-cfg && echo $$libs)
+HOSTLDLIBS_mconf = $(shell . $(obj)/mconf-cfg && echo $$libs)
 $(foreach f, mconf.o $(lxdialog), \
-  $(eval HOSTCFLAGS_$f = $$(shell . $(obj)/.mconf-cfg && echo $$$$cflags)))
+  $(eval HOSTCFLAGS_$f = $$(shell . $(obj)/mconf-cfg && echo $$$$cflags)))
 
-$(obj)/mconf.o: $(obj)/.mconf-cfg
-$(addprefix $(obj)/lxdialog/, $(lxdialog)): $(obj)/.mconf-cfg
+$(obj)/mconf.o: $(obj)/mconf-cfg
+$(addprefix $(obj)/lxdialog/, $(lxdialog)): $(obj)/mconf-cfg
 
 # qconf: Used for the xconfig target based on Qt
 hostprogs-y	+= qconf
 qconf-cxxobjs	:= qconf.o
 qconf-objs	:= images.o $(common-objs)
 
-HOSTLDLIBS_qconf	= $(shell . $(obj)/.qconf-cfg && echo $$libs)
-HOSTCXXFLAGS_qconf.o	= $(shell . $(obj)/.qconf-cfg && echo $$cflags)
+HOSTLDLIBS_qconf	= $(shell . $(obj)/qconf-cfg && echo $$libs)
+HOSTCXXFLAGS_qconf.o	= $(shell . $(obj)/qconf-cfg && echo $$cflags)
 
-$(obj)/qconf.o: $(obj)/.qconf-cfg $(obj)/qconf.moc
+$(obj)/qconf.o: $(obj)/qconf-cfg $(obj)/qconf.moc
 
 quiet_cmd_moc = MOC     $@
-      cmd_moc = $(shell . $(obj)/.qconf-cfg && echo $$moc) -i $< -o $@
+      cmd_moc = $(shell . $(obj)/qconf-cfg && echo $$moc) -i $< -o $@
 
-$(obj)/%.moc: $(src)/%.h $(obj)/.qconf-cfg
+$(obj)/%.moc: $(src)/%.h $(obj)/qconf-cfg
 	$(call cmd,moc)
 
 # gconf: Used for the gconfig target based on GTK+
 hostprogs-y	+= gconf
 gconf-objs	:= gconf.o images.o $(common-objs)
 
-HOSTLDLIBS_gconf    = $(shell . $(obj)/.gconf-cfg && echo $$libs)
-HOSTCFLAGS_gconf.o  = $(shell . $(obj)/.gconf-cfg && echo $$cflags)
+HOSTLDLIBS_gconf    = $(shell . $(obj)/gconf-cfg && echo $$libs)
+HOSTCFLAGS_gconf.o  = $(shell . $(obj)/gconf-cfg && echo $$cflags)
 
-$(obj)/gconf.o: $(obj)/.gconf-cfg
+$(obj)/gconf.o: $(obj)/gconf-cfg
 
 # check if necessary packages are available, and configure build flags
 filechk_conf_cfg = $(CONFIG_SHELL) $<
 
-$(obj)/.%conf-cfg: $(src)/%conf-cfg.sh FORCE
+$(obj)/%conf-cfg: $(src)/%conf-cfg.sh FORCE
 	$(call filechk,conf_cfg)
 
-clean-files += .*conf-cfg
+clean-files += conf-cfg