[v2,2/3] dt-bindings: usb: keystone-usb: Add ti,am654-dwc3 support

Message ID 1547132670-5908-3-git-send-email-rogerq@ti.com
State Accepted
Commit d26c05781e08472861dcad4764d4f1585051638c
Headers show
Series
  • Untitled series #17698
Related show

Commit Message

Roger Quadros Jan. 10, 2019, 3:04 p.m.
The AM654 SoC from TI contains a DWC3 controller. Add
support for it.

Signed-off-by: Roger Quadros <rogerq@ti.com>

---
 Documentation/devicetree/bindings/usb/keystone-usb.txt | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

Patch

diff --git a/Documentation/devicetree/bindings/usb/keystone-usb.txt b/Documentation/devicetree/bindings/usb/keystone-usb.txt
index f96e09f..77df82e 100644
--- a/Documentation/devicetree/bindings/usb/keystone-usb.txt
+++ b/Documentation/devicetree/bindings/usb/keystone-usb.txt
@@ -3,7 +3,9 @@  TI Keystone Soc USB Controller
 DWC3 GLUE
 
 Required properties:
- - compatible: should be "ti,keystone-dwc3".
+ - compatible: should be
+		"ti,keystone-dwc3" for Keystone 2 SoCs
+		"ti,am654-dwc3" for AM654 SoC
  - #address-cells, #size-cells : should be '1' if the device has sub-nodes
    with 'reg' property.
  - reg : Address and length of the register set for the USB subsystem on
@@ -21,7 +23,7 @@  SoCs only:
 - clock-names:		Must be "usb".
 
 
-The following are mandatory properties for Keystone 2 66AK2G SoCs only:
+The following are mandatory properties for 66AK2G and AM654:
 
 - power-domains:	Should contain a phandle to a PM domain provider node
 			and an args specifier containing the USB device id