@@ -16,6 +16,8 @@
#include "meson-aoclk.h"
#include "axg-aoclk.h"
+#define IN_PREFIX "ao-in-"
+
/*
* AO Configuration Clock registers offsets
* Register offsets from the data sheet must be multiplied by 4.
@@ -38,7 +40,7 @@ static struct clk_regmap axg_aoclk_##_name = { \
.hw.init = &(struct clk_init_data) { \
.name = "axg_ao_" #_name, \
.ops = &clk_regmap_gate_ops, \
- .parent_names = (const char *[]){ "clk81" }, \
+ .parent_names = (const char *[]){ IN_PREFIX "mpeg-clk" }, \
.num_parents = 1, \
.flags = CLK_IGNORE_UNUSED, \
}, \
@@ -60,7 +62,7 @@ static struct clk_regmap axg_aoclk_cts_oscin = {
.hw.init = &(struct clk_init_data){
.name = "cts_oscin",
.ops = &clk_regmap_gate_ro_ops,
- .parent_names = (const char *[]){ "xtal" },
+ .parent_names = (const char *[]){ IN_PREFIX "xtal" },
.num_parents = 1,
},
};
@@ -167,7 +169,7 @@ static struct clk_regmap axg_aoclk_cts_rtc_oscin = {
.name = "axg_ao_cts_rtc_oscin",
.ops = &clk_regmap_mux_ops,
.parent_names = (const char *[]){ "axg_ao_32k",
- "axg_ext_32k" },
+ IN_PREFIX "ext_32k-0" },
.num_parents = 2,
.flags = CLK_SET_RATE_PARENT,
},
@@ -183,7 +185,7 @@ static struct clk_regmap axg_aoclk_clk81 = {
.hw.init = &(struct clk_init_data){
.name = "axg_ao_clk81",
.ops = &clk_regmap_mux_ro_ops,
- .parent_names = (const char *[]){ "clk81",
+ .parent_names = (const char *[]){ IN_PREFIX "mpeg-clk",
"axg_ao_cts_rtc_oscin"},
.num_parents = 2,
.flags = CLK_SET_RATE_PARENT,
@@ -199,7 +201,8 @@ static struct clk_regmap axg_aoclk_saradc_mux = {
.hw.init = &(struct clk_init_data){
.name = "axg_ao_saradc_mux",
.ops = &clk_regmap_mux_ops,
- .parent_names = (const char *[]){ "xtal", "axg_ao_clk81" },
+ .parent_names = (const char *[]){ IN_PREFIX "xtal",
+ "axg_ao_clk81" },
.num_parents = 2,
},
};
@@ -285,6 +288,12 @@ static const struct clk_hw_onecell_data axg_aoclk_onecell_data = {
.num = NR_CLKS,
};
+static const struct meson_aoclk_input axg_aoclk_inputs[] = {
+ { .name = "xtal", .required = true },
+ { .name = "mpeg-clk", .required = true },
+ { .name = "ext-32k-0", .required = false },
+};
+
static const struct meson_aoclk_data axg_aoclkc_data = {
.reset_reg = AO_RTI_GEN_CNTL_REG0,
.num_reset = ARRAY_SIZE(axg_aoclk_reset),
@@ -292,6 +301,9 @@ static const struct meson_aoclk_data axg_aoclkc_data = {
.num_clks = ARRAY_SIZE(axg_aoclk_regmap),
.clks = axg_aoclk_regmap,
.hw_data = &axg_aoclk_onecell_data,
+ .inputs = axg_aoclk_inputs,
+ .num_inputs = ARRAY_SIZE(axg_aoclk_inputs),
+ .input_prefix = IN_PREFIX,
};
static const struct of_device_id axg_aoclkc_match_table[] = {
@@ -9,6 +9,8 @@
#include "meson-aoclk.h"
#include "gxbb-aoclk.h"
+#define IN_PREFIX "ao-in-"
+
/* AO Configuration Clock registers offsets */
#define AO_RTI_PWR_CNTL_REG1 0x0c
#define AO_RTI_PWR_CNTL_REG0 0x10
@@ -27,7 +29,7 @@ static struct clk_regmap _name##_ao = { \
.hw.init = &(struct clk_init_data) { \
.name = #_name "_ao", \
.ops = &clk_regmap_gate_ops, \
- .parent_names = (const char *[]){ "clk81" }, \
+ .parent_names = (const char *[]){ IN_PREFIX "mpeg-clk" }, \
.num_parents = 1, \
.flags = CLK_IGNORE_UNUSED, \
}, \
@@ -48,7 +50,7 @@ static struct clk_regmap ao_cts_oscin = {
.hw.init = &(struct clk_init_data){
.name = "ao_cts_oscin",
.ops = &clk_regmap_gate_ro_ops,
- .parent_names = (const char *[]){ "xtal" },
+ .parent_names = (const char *[]){ IN_PREFIX "xtal" },
.num_parents = 1,
},
};
@@ -155,9 +157,9 @@ static struct clk_regmap ao_cts_rtc_oscin = {
.hw.init = &(struct clk_init_data){
.name = "ao_cts_rtc_oscin",
.ops = &clk_regmap_mux_ops,
- .parent_names = (const char *[]){ "ext_32k_0",
- "ext_32k_1",
- "ext_32k_2",
+ .parent_names = (const char *[]){ IN_PREFIX "ext-32k-0",
+ IN_PREFIX "ext-32k-1",
+ IN_PREFIX "ext-32k-2",
"ao_32k" },
.num_parents = 4,
.flags = CLK_SET_RATE_PARENT,
@@ -174,7 +176,7 @@ static struct clk_regmap ao_clk81 = {
.hw.init = &(struct clk_init_data){
.name = "ao_clk81",
.ops = &clk_regmap_mux_ro_ops,
- .parent_names = (const char *[]){ "clk81",
+ .parent_names = (const char *[]){ IN_PREFIX "mpeg-clk",
"ao_cts_rtc_oscin" },
.num_parents = 2,
.flags = CLK_SET_RATE_PARENT,
@@ -257,6 +259,14 @@ static const struct clk_hw_onecell_data gxbb_aoclk_onecell_data = {
.num = NR_CLKS,
};
+static const struct meson_aoclk_input gxbb_aoclk_inputs[] = {
+ { .name = "xtal", .required = true, },
+ { .name = "mpeg-clk", .required = true, },
+ {. name = "ext-32k-0", .required = false, },
+ {. name = "ext-32k-1", .required = false, },
+ {. name = "ext-32k-2", .required = false, },
+};
+
static const struct meson_aoclk_data gxbb_aoclkc_data = {
.reset_reg = AO_RTI_GEN_CNTL_REG0,
.num_reset = ARRAY_SIZE(gxbb_aoclk_reset),
@@ -264,6 +274,9 @@ static const struct meson_aoclk_data gxbb_aoclkc_data = {
.num_clks = ARRAY_SIZE(gxbb_aoclk),
.clks = gxbb_aoclk,
.hw_data = &gxbb_aoclk_onecell_data,
+ .inputs = gxbb_aoclk_inputs,
+ .num_inputs = ARRAY_SIZE(gxbb_aoclk_inputs),
+ .input_prefix = IN_PREFIX,
};
static const struct of_device_id gxbb_aoclkc_match_table[] = {
@@ -14,7 +14,7 @@
#include <linux/reset-controller.h>
#include <linux/mfd/syscon.h>
#include <linux/of_device.h>
-#include "clk-regmap.h"
+#include <linux/slab.h>
#include "meson-aoclk.h"
static int meson_aoclk_do_reset(struct reset_controller_dev *rcdev,
@@ -31,6 +31,37 @@ static const struct reset_control_ops meson_aoclk_reset_ops = {
.reset = meson_aoclk_do_reset,
};
+static int meson_aoclkc_register_inputs(struct device *dev,
+ struct meson_aoclk_data *data)
+{
+ struct clk_hw *hw;
+ char *str;
+ int i;
+
+ for (i = 0; i < data->num_inputs; i++) {
+ const struct meson_aoclk_input *in = &data->inputs[i];
+
+ str = kasprintf(GFP_KERNEL, "%s%s", data->input_prefix,
+ in->name);
+ if (!str)
+ return -ENOMEM;
+
+ hw = meson_clk_hw_register_input(dev, in->name, str, 0);
+ kfree(str);
+
+ if (IS_ERR(hw)) {
+ if (!in->required && PTR_ERR(hw) == -ENOENT)
+ continue;
+ else if (PTR_ERR(hw) != -EPROBE_DEFER)
+ dev_err(dev, "failed to register input %s\n",
+ in->name);
+ return PTR_ERR(hw);
+ }
+ }
+
+ return 0;
+}
+
int meson_aoclkc_probe(struct platform_device *pdev)
{
struct meson_aoclk_reset_controller *rstc;
@@ -53,6 +84,10 @@ int meson_aoclkc_probe(struct platform_device *pdev)
return PTR_ERR(regmap);
}
+ ret = meson_aoclkc_register_inputs(dev, data);
+ if (ret)
+ return ret;
+
/* Reset Controller */
rstc->data = data;
rstc->regmap = regmap;
@@ -13,14 +13,22 @@
#include <linux/platform_device.h>
#include <linux/reset-controller.h>
-#include "clk-regmap.h"
+#include "clkc.h"
+
+struct meson_aoclk_input {
+ const char *name;
+ bool required;
+};
struct meson_aoclk_data {
const unsigned int reset_reg;
const int num_reset;
const unsigned int *reset;
- int num_clks;
+ const int num_clks;
struct clk_regmap **clks;
+ const int num_inputs;
+ const struct meson_aoclk_input *inputs;
+ const char *input_prefix;
const struct clk_hw_onecell_data *hw_data;
};
Instead of relying on a fixed names for the differents input clocks of the controller, get them through DT. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> --- drivers/clk/meson/axg-aoclk.c | 22 +++++++++++++++----- drivers/clk/meson/gxbb-aoclk.c | 25 ++++++++++++++++------ drivers/clk/meson/meson-aoclk.c | 37 ++++++++++++++++++++++++++++++++- drivers/clk/meson/meson-aoclk.h | 12 +++++++++-- 4 files changed, 82 insertions(+), 14 deletions(-) -- 2.20.1