mtd: rawnand: remove ->legacy.erase and single_erase()

Message ID 1548051883-8309-1-git-send-email-yamada.masahiro@socionext.com
State Superseded
Headers show
Series
  • mtd: rawnand: remove ->legacy.erase and single_erase()
Related show

Commit Message

Masahiro Yamada Jan. 21, 2019, 6:24 a.m.
Now that the last user of this hook, denali.c, stopped using it,
we can remove the erase hook from nand_legacy.

I squashed single_erase() because only the difference between
single_erase() and nand_erase_op() is the number of bit shifts.

The status/ret conversion in nand_erase_nand() is unneeded since
commit eb94555e9e97 ("mtd: nand: use usual return values for the
->erase() hook"). Cleaned it up now.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

---

This depends on the denali patch:
http://patchwork.ozlabs.org/patch/1028264/


 drivers/mtd/nand/raw/nand_base.c | 32 +++++---------------------------
 include/linux/mtd/rawnand.h      |  2 --
 2 files changed, 5 insertions(+), 29 deletions(-)

-- 
2.7.4


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Patch

diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index cca4b24..690900b 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -4155,23 +4155,6 @@  static int nand_write_oob(struct mtd_info *mtd, loff_t to,
 }
 
 /**
- * single_erase - [GENERIC] NAND standard block erase command function
- * @chip: NAND chip object
- * @page: the page address of the block which will be erased
- *
- * Standard erase command for NAND chips. Returns NAND status.
- */
-static int single_erase(struct nand_chip *chip, int page)
-{
-	unsigned int eraseblock;
-
-	/* Send commands to erase a block */
-	eraseblock = page >> (chip->phys_erase_shift - chip->page_shift);
-
-	return nand_erase_op(chip, eraseblock);
-}
-
-/**
  * nand_erase - [MTD Interface] erase block(s)
  * @mtd: MTD device structure
  * @instr: erase instruction
@@ -4194,7 +4177,7 @@  static int nand_erase(struct mtd_info *mtd, struct erase_info *instr)
 int nand_erase_nand(struct nand_chip *chip, struct erase_info *instr,
 		    int allowbbt)
 {
-	int page, status, pages_per_block, ret, chipnr;
+	int page, pages_per_block, ret, chipnr;
 	loff_t len;
 
 	pr_debug("%s: start = 0x%012llx, len = %llu\n",
@@ -4246,17 +4229,12 @@  int nand_erase_nand(struct nand_chip *chip, struct erase_info *instr,
 		    (page + pages_per_block))
 			chip->pagebuf = -1;
 
-		if (chip->legacy.erase)
-			status = chip->legacy.erase(chip,
-						    page & chip->pagemask);
-		else
-			status = single_erase(chip, page & chip->pagemask);
-
-		/* See if block erase succeeded */
-		if (status) {
+		ret = nand_erase_op(chip,
+				    page >> (chip->phys_erase_shift -
+					     chip->page_shift));
+		if (ret) {
 			pr_debug("%s: failed erase, page 0x%08x\n",
 					__func__, page);
-			ret = -EIO;
 			instr->fail_addr =
 				((loff_t)page << chip->page_shift);
 			goto erase_exit;
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index 33e240a..5e37534 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -936,7 +936,6 @@  static inline void nand_controller_init(struct nand_controller *nfc)
  * @waitfunc: hardware specific function for wait on ready.
  * @block_bad: check if a block is bad, using OOB markers
  * @block_markbad: mark a block bad
- * @erase: erase function
  * @set_features: set the NAND chip features
  * @get_features: get the NAND chip features
  * @chip_delay: chip dependent delay for transferring data from array to read
@@ -962,7 +961,6 @@  struct nand_legacy {
 	int (*waitfunc)(struct nand_chip *chip);
 	int (*block_bad)(struct nand_chip *chip, loff_t ofs);
 	int (*block_markbad)(struct nand_chip *chip, loff_t ofs);
-	int (*erase)(struct nand_chip *chip, int page);
 	int (*set_features)(struct nand_chip *chip, int feature_addr,
 			    u8 *subfeature_para);
 	int (*get_features)(struct nand_chip *chip, int feature_addr,