net: dsa: qca8k: Enable delay for RGMII_ID mode

Message ID 20190218130352.9373-1-vkoul@kernel.org
State New
Headers show
Series
  • net: dsa: qca8k: Enable delay for RGMII_ID mode
Related show

Commit Message

Vinod Koul Feb. 18, 2019, 1:03 p.m.
RGMII_ID specifies that we should have internal delay, so resurrect the
delay addition routine but under the RGMII_ID mode.

Fixes: 40269aa9f40a ("net: dsa: qca8k: disable delay for RGMII mode")
Signed-off-by: Vinod Koul <vkoul@kernel.org>

---
 drivers/net/dsa/qca8k.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

-- 
2.20.1

Patch

diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index a4b6cda38016..aa1f7f1b20d3 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -443,6 +443,18 @@  qca8k_set_pad_ctrl(struct qca8k_priv *priv, int port, int mode)
 		val = QCA8K_PORT_PAD_RGMII_EN;
 		qca8k_write(priv, reg, val);
 		break;
+	case PHY_INTERFACE_MODE_RGMII_ID:
+		/* RGMII_ID needs internal delay. This is enabled through
+		 * PORT5_PAD_CTRL for all ports, rather than individual port
+		 * registers
+		 */
+		qca8k_write(priv, reg,
+			    QCA8K_PORT_PAD_RGMII_EN |
+			    QCA8K_PORT_PAD_RGMII_TX_DELAY(3) |
+			    QCA8K_PORT_PAD_RGMII_RX_DELAY(3));
+		qca8k_write(priv, QCA8K_REG_PORT5_PAD_CTRL,
+			    QCA8K_PORT_PAD_RGMII_RX_DELAY_EN);
+		break;
 	case PHY_INTERFACE_MODE_SGMII:
 		qca8k_write(priv, reg, QCA8K_PORT_PAD_SGMII_EN);
 		break;