diff mbox series

[v2] efi: Unify dmi setup code over architectures arm/arm64, io64 and x86

Message ID 20190320152240.2eun63wqkbqmuqkg@rric.localdomain
State Superseded
Headers show
Series [v2] efi: Unify dmi setup code over architectures arm/arm64, io64 and x86 | expand

Commit Message

Robert Richter March 20, 2019, 3:22 p.m. UTC
On 20.03.19 14:16:07, Robert Richter wrote:
> On 20.03.19 13:05:37, Robert Richter wrote:

> > @@ -167,6 +167,7 @@ static int __init arm_dmi_init(void)

> >  	 * itself, depends on dmi_scan_machine() having been called already.

> >  	 */

> >  	dmi_scan_machine();

> > +	dmi_memdev_walk();

> >  	if (dmi_available)

> >  		dmi_set_dump_stack_arch_desc();

> >  	return 0;

> 

> After

> 

>  [PATCH] efi/arm: Show SMBIOS bank/device location in cper and

>   ghes error logs

> 

> wents in for arm/arm64, we can unify the code. See patch below.


V2 with the fix in arm_dmi_init() below.

-Robert


-- >8 --
From: Robert Richter <rrichter@marvell.com>

Subject: [PATCH v2] efi: Unify dmi setup code over architectures arm/arm64,
 io64 and x86

All architectures (arm/arm64, io64 and x86) do the same here, so unify
the code.

Note: We do not need to call dump_stack_set_arch_desc() in case of
!dmi_available. Both strings, dmi_ids_string and dump_stack_arch_
desc_str are initialized zero and thus nothing would change.

Signed-off-by: Robert Richter <rrichter@marvell.com>

---
 arch/ia64/kernel/setup.c           |  4 +---
 arch/x86/kernel/setup.c            |  6 ++----
 drivers/firmware/dmi_scan.c        | 28 +++++++++++++++-------------
 drivers/firmware/efi/arm-runtime.c |  7 ++-----
 include/linux/dmi.h                |  8 ++------
 5 files changed, 22 insertions(+), 31 deletions(-)

-- 
2.20.1

Comments

Ard Biesheuvel March 20, 2019, 10:02 p.m. UTC | #1
On Wed, 20 Mar 2019 at 16:23, Robert Richter <rrichter@marvell.com> wrote:
>

> On 20.03.19 14:16:07, Robert Richter wrote:

> > On 20.03.19 13:05:37, Robert Richter wrote:

> > > @@ -167,6 +167,7 @@ static int __init arm_dmi_init(void)

> > >      * itself, depends on dmi_scan_machine() having been called already.

> > >      */

> > >     dmi_scan_machine();

> > > +   dmi_memdev_walk();

> > >     if (dmi_available)

> > >             dmi_set_dump_stack_arch_desc();

> > >     return 0;

> >

> > After

> >

> >  [PATCH] efi/arm: Show SMBIOS bank/device location in cper and

> >   ghes error logs

> >

> > wents in for arm/arm64, we can unify the code. See patch below.

>

> V2 with the fix in arm_dmi_init() below.

>

> -Robert

>

>

> -- >8 --

> From: Robert Richter <rrichter@marvell.com>

> Subject: [PATCH v2] efi: Unify dmi setup code over architectures arm/arm64,

>  io64 and x86

>

> All architectures (arm/arm64, io64 and x86) do the same here, so unify

> the code.

>

> Note: We do not need to call dump_stack_set_arch_desc() in case of

> !dmi_available. Both strings, dmi_ids_string and dump_stack_arch_

> desc_str are initialized zero and thus nothing would change.

>


I don't understand the last sentence - we do not need to call
dump_stack_set_arch_desc() when !dmi_available, but we do so anyway,
right? Doesn't that wipe the arch description we set based on the DT
machine name?

> Signed-off-by: Robert Richter <rrichter@marvell.com>

> ---

>  arch/ia64/kernel/setup.c           |  4 +---

>  arch/x86/kernel/setup.c            |  6 ++----

>  drivers/firmware/dmi_scan.c        | 28 +++++++++++++++-------------

>  drivers/firmware/efi/arm-runtime.c |  7 ++-----

>  include/linux/dmi.h                |  8 ++------

>  5 files changed, 22 insertions(+), 31 deletions(-)

>

> diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c

> index 583a3746d70b..c9cfa760cd57 100644

> --- a/arch/ia64/kernel/setup.c

> +++ b/arch/ia64/kernel/setup.c

> @@ -1058,9 +1058,7 @@ check_bugs (void)

>

>  static int __init run_dmi_scan(void)

>  {

> -       dmi_scan_machine();

> -       dmi_memdev_walk();

> -       dmi_set_dump_stack_arch_desc();

> +       dmi_setup();

>         return 0;

>  }

>  core_initcall(run_dmi_scan);

> diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c

> index 3d872a527cd9..3773905cd2c1 100644

> --- a/arch/x86/kernel/setup.c

> +++ b/arch/x86/kernel/setup.c

> @@ -1005,13 +1005,11 @@ void __init setup_arch(char **cmdline_p)

>         if (efi_enabled(EFI_BOOT))

>                 efi_init();

>

> -       dmi_scan_machine();

> -       dmi_memdev_walk();

> -       dmi_set_dump_stack_arch_desc();

> +       dmi_setup();

>

>         /*

>          * VMware detection requires dmi to be available, so this

> -        * needs to be done after dmi_scan_machine(), for the boot CPU.

> +        * needs to be done after dmi_setup(), for the boot CPU.

>          */

>         init_hypervisor_platform();

>

> diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c

> index 099d83e4e910..fae2d5c43314 100644

> --- a/drivers/firmware/dmi_scan.c

> +++ b/drivers/firmware/dmi_scan.c

> @@ -416,11 +416,8 @@ static void __init save_mem_devices(const struct dmi_header *dm, void *v)

>         nr++;

>  }

>

> -void __init dmi_memdev_walk(void)

> +static void __init dmi_memdev_walk(void)

>  {

> -       if (!dmi_available)

> -               return;

> -

>         if (dmi_walk_early(count_mem_devices) == 0 && dmi_memdev_nr) {

>                 dmi_memdev = dmi_alloc(sizeof(*dmi_memdev) * dmi_memdev_nr);

>                 if (dmi_memdev)

> @@ -614,7 +611,7 @@ static int __init dmi_smbios3_present(const u8 *buf)

>         return 1;

>  }

>

> -void __init dmi_scan_machine(void)

> +static void __init dmi_scan_machine(void)

>  {

>         char __iomem *p, *q;

>         char buf[32];

> @@ -769,15 +766,20 @@ static int __init dmi_init(void)

>  subsys_initcall(dmi_init);

>

>  /**

> - * dmi_set_dump_stack_arch_desc - set arch description for dump_stack()

> + *     dmi_setup - scan and setup DMI system information

>   *

> - * Invoke dump_stack_set_arch_desc() with DMI system information so that

> - * DMI identifiers are printed out on task dumps.  Arch boot code should

> - * call this function after dmi_scan_machine() if it wants to print out DMI

> - * identifiers on task dumps.

> + *     Scan the DMI system information. This setups DMI identifiers

> + *     (dmi_system_id) for printing it out on task dumps and prepares

> + *     DIMM entry information (dmi_memdev_info) from the SMBIOS table

> + *     for using this when reporting memory errors.

>   */

> -void __init dmi_set_dump_stack_arch_desc(void)

> +void __init dmi_setup(void)

>  {

> +       dmi_scan_machine();

> +       if (!dmi_available)

> +               return;

> +

> +       dmi_memdev_walk();

>         dump_stack_set_arch_desc("%s", dmi_ids_string);

>  }

>

> @@ -841,7 +843,7 @@ static bool dmi_is_end_of_table(const struct dmi_system_id *dmi)

>   *     returns non zero or we hit the end. Callback function is called for

>   *     each successful match. Returns the number of matches.

>   *

> - *     dmi_scan_machine must be called before this function is called.

> + *     dmi_setup must be called before this function is called.

>   */

>  int dmi_check_system(const struct dmi_system_id *list)

>  {

> @@ -871,7 +873,7 @@ EXPORT_SYMBOL(dmi_check_system);

>   *     Walk the blacklist table until the first match is found.  Return the

>   *     pointer to the matching entry or NULL if there's no match.

>   *

> - *     dmi_scan_machine must be called before this function is called.

> + *     dmi_setup must be called before this function is called.

>   */

>  const struct dmi_system_id *dmi_first_match(const struct dmi_system_id *list)

>  {

> diff --git a/drivers/firmware/efi/arm-runtime.c b/drivers/firmware/efi/arm-runtime.c

> index 4a0dfe4ab829..e2ac5fa5531b 100644

> --- a/drivers/firmware/efi/arm-runtime.c

> +++ b/drivers/firmware/efi/arm-runtime.c

> @@ -162,14 +162,11 @@ void efi_virtmap_unload(void)

>  static int __init arm_dmi_init(void)

>  {

>         /*

> -        * On arm64/ARM, DMI depends on UEFI, and dmi_scan_machine() needs to

> +        * On arm64/ARM, DMI depends on UEFI, and dmi_setup() needs to

>          * be called early because dmi_id_init(), which is an arch_initcall

>          * itself, depends on dmi_scan_machine() having been called already.

>          */

> -       dmi_scan_machine();

> -       dmi_memdev_walk();

> -       if (dmi_available)

> -               dmi_set_dump_stack_arch_desc();

> +       dmi_setup();

>         return 0;

>  }

>  core_initcall(arm_dmi_init);

> diff --git a/include/linux/dmi.h b/include/linux/dmi.h

> index c46fdb36700b..8de8c4f15163 100644

> --- a/include/linux/dmi.h

> +++ b/include/linux/dmi.h

> @@ -102,9 +102,7 @@ const struct dmi_system_id *dmi_first_match(const struct dmi_system_id *list);

>  extern const char * dmi_get_system_info(int field);

>  extern const struct dmi_device * dmi_find_device(int type, const char *name,

>         const struct dmi_device *from);

> -extern void dmi_scan_machine(void);

> -extern void dmi_memdev_walk(void);

> -extern void dmi_set_dump_stack_arch_desc(void);

> +extern void dmi_setup(void);

>  extern bool dmi_get_date(int field, int *yearp, int *monthp, int *dayp);

>  extern int dmi_get_bios_year(void);

>  extern int dmi_name_in_vendors(const char *str);

> @@ -122,9 +120,7 @@ static inline int dmi_check_system(const struct dmi_system_id *list) { return 0;

>  static inline const char * dmi_get_system_info(int field) { return NULL; }

>  static inline const struct dmi_device * dmi_find_device(int type, const char *name,

>         const struct dmi_device *from) { return NULL; }

> -static inline void dmi_scan_machine(void) { return; }

> -static inline void dmi_memdev_walk(void) { }

> -static inline void dmi_set_dump_stack_arch_desc(void) { }

> +static inline void dmi_setup(void) { }

>  static inline bool dmi_get_date(int field, int *yearp, int *monthp, int *dayp)

>  {

>         if (yearp)

> --

> 2.20.1

>
Robert Richter March 21, 2019, 9:39 a.m. UTC | #2
On 20.03.19 23:02:09, Ard Biesheuvel wrote:
> On Wed, 20 Mar 2019 at 16:23, Robert Richter <rrichter@marvell.com> wrote:

> >

> > On 20.03.19 14:16:07, Robert Richter wrote:

> > > On 20.03.19 13:05:37, Robert Richter wrote:

> > > > @@ -167,6 +167,7 @@ static int __init arm_dmi_init(void)

> > > >      * itself, depends on dmi_scan_machine() having been called already.

> > > >      */

> > > >     dmi_scan_machine();

> > > > +   dmi_memdev_walk();

> > > >     if (dmi_available)

> > > >             dmi_set_dump_stack_arch_desc();

> > > >     return 0;

> > >

> > > After

> > >

> > >  [PATCH] efi/arm: Show SMBIOS bank/device location in cper and

> > >   ghes error logs

> > >

> > > wents in for arm/arm64, we can unify the code. See patch below.

> >

> > V2 with the fix in arm_dmi_init() below.

> >

> > -Robert

> >

> >

> > -- >8 --

> > From: Robert Richter <rrichter@marvell.com>

> > Subject: [PATCH v2] efi: Unify dmi setup code over architectures arm/arm64,

> >  io64 and x86

> >

> > All architectures (arm/arm64, io64 and x86) do the same here, so unify

> > the code.

> >

> > Note: We do not need to call dump_stack_set_arch_desc() in case of

> > !dmi_available. Both strings, dmi_ids_string and dump_stack_arch_

> > desc_str are initialized zero and thus nothing would change.

> >

> 

> I don't understand the last sentence - we do not need to call

> dump_stack_set_arch_desc() when !dmi_available, but we do so anyway,

> right? Doesn't that wipe the arch description we set based on the DT

> machine name?


No, in dmi_setup() we exit early when !dmi_available. So for arm/arm64
nothing changed. But for x86 and ia64 we no longer call dump_stack_
set_arch_desc() in this case. This is ok since both strings,
dmi_ids_string and dump_stack_arch_desc_str, are initialized zero and
copying one to the other does not change anything.

-Robert

> 

> > Signed-off-by: Robert Richter <rrichter@marvell.com>

> > ---

> >  arch/ia64/kernel/setup.c           |  4 +---

> >  arch/x86/kernel/setup.c            |  6 ++----

> >  drivers/firmware/dmi_scan.c        | 28 +++++++++++++++-------------

> >  drivers/firmware/efi/arm-runtime.c |  7 ++-----

> >  include/linux/dmi.h                |  8 ++------

> >  5 files changed, 22 insertions(+), 31 deletions(-)

> >

> > diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c

> > index 583a3746d70b..c9cfa760cd57 100644

> > --- a/arch/ia64/kernel/setup.c

> > +++ b/arch/ia64/kernel/setup.c

> > @@ -1058,9 +1058,7 @@ check_bugs (void)

> >

> >  static int __init run_dmi_scan(void)

> >  {

> > -       dmi_scan_machine();

> > -       dmi_memdev_walk();

> > -       dmi_set_dump_stack_arch_desc();

> > +       dmi_setup();

> >         return 0;

> >  }

> >  core_initcall(run_dmi_scan);

> > diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c

> > index 3d872a527cd9..3773905cd2c1 100644

> > --- a/arch/x86/kernel/setup.c

> > +++ b/arch/x86/kernel/setup.c

> > @@ -1005,13 +1005,11 @@ void __init setup_arch(char **cmdline_p)

> >         if (efi_enabled(EFI_BOOT))

> >                 efi_init();

> >

> > -       dmi_scan_machine();

> > -       dmi_memdev_walk();

> > -       dmi_set_dump_stack_arch_desc();

> > +       dmi_setup();

> >

> >         /*

> >          * VMware detection requires dmi to be available, so this

> > -        * needs to be done after dmi_scan_machine(), for the boot CPU.

> > +        * needs to be done after dmi_setup(), for the boot CPU.

> >          */

> >         init_hypervisor_platform();

> >

> > diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c

> > index 099d83e4e910..fae2d5c43314 100644

> > --- a/drivers/firmware/dmi_scan.c

> > +++ b/drivers/firmware/dmi_scan.c

> > @@ -416,11 +416,8 @@ static void __init save_mem_devices(const struct dmi_header *dm, void *v)

> >         nr++;

> >  }

> >

> > -void __init dmi_memdev_walk(void)

> > +static void __init dmi_memdev_walk(void)

> >  {

> > -       if (!dmi_available)

> > -               return;

> > -

> >         if (dmi_walk_early(count_mem_devices) == 0 && dmi_memdev_nr) {

> >                 dmi_memdev = dmi_alloc(sizeof(*dmi_memdev) * dmi_memdev_nr);

> >                 if (dmi_memdev)

> > @@ -614,7 +611,7 @@ static int __init dmi_smbios3_present(const u8 *buf)

> >         return 1;

> >  }

> >

> > -void __init dmi_scan_machine(void)

> > +static void __init dmi_scan_machine(void)

> >  {

> >         char __iomem *p, *q;

> >         char buf[32];

> > @@ -769,15 +766,20 @@ static int __init dmi_init(void)

> >  subsys_initcall(dmi_init);

> >

> >  /**

> > - * dmi_set_dump_stack_arch_desc - set arch description for dump_stack()

> > + *     dmi_setup - scan and setup DMI system information

> >   *

> > - * Invoke dump_stack_set_arch_desc() with DMI system information so that

> > - * DMI identifiers are printed out on task dumps.  Arch boot code should

> > - * call this function after dmi_scan_machine() if it wants to print out DMI

> > - * identifiers on task dumps.

> > + *     Scan the DMI system information. This setups DMI identifiers

> > + *     (dmi_system_id) for printing it out on task dumps and prepares

> > + *     DIMM entry information (dmi_memdev_info) from the SMBIOS table

> > + *     for using this when reporting memory errors.

> >   */

> > -void __init dmi_set_dump_stack_arch_desc(void)

> > +void __init dmi_setup(void)

> >  {

> > +       dmi_scan_machine();

> > +       if (!dmi_available)

> > +               return;

> > +

> > +       dmi_memdev_walk();

> >         dump_stack_set_arch_desc("%s", dmi_ids_string);

> >  }

> >

> > @@ -841,7 +843,7 @@ static bool dmi_is_end_of_table(const struct dmi_system_id *dmi)

> >   *     returns non zero or we hit the end. Callback function is called for

> >   *     each successful match. Returns the number of matches.

> >   *

> > - *     dmi_scan_machine must be called before this function is called.

> > + *     dmi_setup must be called before this function is called.

> >   */

> >  int dmi_check_system(const struct dmi_system_id *list)

> >  {

> > @@ -871,7 +873,7 @@ EXPORT_SYMBOL(dmi_check_system);

> >   *     Walk the blacklist table until the first match is found.  Return the

> >   *     pointer to the matching entry or NULL if there's no match.

> >   *

> > - *     dmi_scan_machine must be called before this function is called.

> > + *     dmi_setup must be called before this function is called.

> >   */

> >  const struct dmi_system_id *dmi_first_match(const struct dmi_system_id *list)

> >  {

> > diff --git a/drivers/firmware/efi/arm-runtime.c b/drivers/firmware/efi/arm-runtime.c

> > index 4a0dfe4ab829..e2ac5fa5531b 100644

> > --- a/drivers/firmware/efi/arm-runtime.c

> > +++ b/drivers/firmware/efi/arm-runtime.c

> > @@ -162,14 +162,11 @@ void efi_virtmap_unload(void)

> >  static int __init arm_dmi_init(void)

> >  {

> >         /*

> > -        * On arm64/ARM, DMI depends on UEFI, and dmi_scan_machine() needs to

> > +        * On arm64/ARM, DMI depends on UEFI, and dmi_setup() needs to

> >          * be called early because dmi_id_init(), which is an arch_initcall

> >          * itself, depends on dmi_scan_machine() having been called already.

> >          */

> > -       dmi_scan_machine();

> > -       dmi_memdev_walk();

> > -       if (dmi_available)

> > -               dmi_set_dump_stack_arch_desc();

> > +       dmi_setup();

> >         return 0;

> >  }

> >  core_initcall(arm_dmi_init);

> > diff --git a/include/linux/dmi.h b/include/linux/dmi.h

> > index c46fdb36700b..8de8c4f15163 100644

> > --- a/include/linux/dmi.h

> > +++ b/include/linux/dmi.h

> > @@ -102,9 +102,7 @@ const struct dmi_system_id *dmi_first_match(const struct dmi_system_id *list);

> >  extern const char * dmi_get_system_info(int field);

> >  extern const struct dmi_device * dmi_find_device(int type, const char *name,

> >         const struct dmi_device *from);

> > -extern void dmi_scan_machine(void);

> > -extern void dmi_memdev_walk(void);

> > -extern void dmi_set_dump_stack_arch_desc(void);

> > +extern void dmi_setup(void);

> >  extern bool dmi_get_date(int field, int *yearp, int *monthp, int *dayp);

> >  extern int dmi_get_bios_year(void);

> >  extern int dmi_name_in_vendors(const char *str);

> > @@ -122,9 +120,7 @@ static inline int dmi_check_system(const struct dmi_system_id *list) { return 0;

> >  static inline const char * dmi_get_system_info(int field) { return NULL; }

> >  static inline const struct dmi_device * dmi_find_device(int type, const char *name,

> >         const struct dmi_device *from) { return NULL; }

> > -static inline void dmi_scan_machine(void) { return; }

> > -static inline void dmi_memdev_walk(void) { }

> > -static inline void dmi_set_dump_stack_arch_desc(void) { }

> > +static inline void dmi_setup(void) { }

> >  static inline bool dmi_get_date(int field, int *yearp, int *monthp, int *dayp)

> >  {

> >         if (yearp)

> > --

> > 2.20.1

> >
Ard Biesheuvel March 21, 2019, 9:51 a.m. UTC | #3
On Thu, 21 Mar 2019 at 10:39, Robert Richter <rrichter@marvell.com> wrote:
>

> On 20.03.19 23:02:09, Ard Biesheuvel wrote:

> > On Wed, 20 Mar 2019 at 16:23, Robert Richter <rrichter@marvell.com> wrote:

> > >

> > > On 20.03.19 14:16:07, Robert Richter wrote:

> > > > On 20.03.19 13:05:37, Robert Richter wrote:

> > > > > @@ -167,6 +167,7 @@ static int __init arm_dmi_init(void)

> > > > >      * itself, depends on dmi_scan_machine() having been called already.

> > > > >      */

> > > > >     dmi_scan_machine();

> > > > > +   dmi_memdev_walk();

> > > > >     if (dmi_available)

> > > > >             dmi_set_dump_stack_arch_desc();

> > > > >     return 0;

> > > >

> > > > After

> > > >

> > > >  [PATCH] efi/arm: Show SMBIOS bank/device location in cper and

> > > >   ghes error logs

> > > >

> > > > wents in for arm/arm64, we can unify the code. See patch below.

> > >

> > > V2 with the fix in arm_dmi_init() below.

> > >

> > > -Robert

> > >

> > >

> > > -- >8 --

> > > From: Robert Richter <rrichter@marvell.com>

> > > Subject: [PATCH v2] efi: Unify dmi setup code over architectures arm/arm64,

> > >  io64 and x86

> > >

> > > All architectures (arm/arm64, io64 and x86) do the same here, so unify

> > > the code.

> > >

> > > Note: We do not need to call dump_stack_set_arch_desc() in case of

> > > !dmi_available. Both strings, dmi_ids_string and dump_stack_arch_

> > > desc_str are initialized zero and thus nothing would change.

> > >

> >

> > I don't understand the last sentence - we do not need to call

> > dump_stack_set_arch_desc() when !dmi_available, but we do so anyway,

> > right? Doesn't that wipe the arch description we set based on the DT

> > machine name?

>

> No, in dmi_setup() we exit early when !dmi_available. So for arm/arm64

> nothing changed. But for x86 and ia64 we no longer call dump_stack_

> set_arch_desc() in this case. This is ok since both strings,

> dmi_ids_string and dump_stack_arch_desc_str, are initialized zero and

> copying one to the other does not change anything.

>


Ah, of course. Apologies for not reading more carefully.

I'll take this patch via the EFI tree.

It seems to me though that the previous patch makes the memdev_walk()
call unconditional for ARM, and this change subsequently makes it
dependent on dmi_available. Should we fix that?

> >

> > > Signed-off-by: Robert Richter <rrichter@marvell.com>

> > > ---

> > >  arch/ia64/kernel/setup.c           |  4 +---

> > >  arch/x86/kernel/setup.c            |  6 ++----

> > >  drivers/firmware/dmi_scan.c        | 28 +++++++++++++++-------------

> > >  drivers/firmware/efi/arm-runtime.c |  7 ++-----

> > >  include/linux/dmi.h                |  8 ++------

> > >  5 files changed, 22 insertions(+), 31 deletions(-)

> > >

> > > diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c

> > > index 583a3746d70b..c9cfa760cd57 100644

> > > --- a/arch/ia64/kernel/setup.c

> > > +++ b/arch/ia64/kernel/setup.c

> > > @@ -1058,9 +1058,7 @@ check_bugs (void)

> > >

> > >  static int __init run_dmi_scan(void)

> > >  {

> > > -       dmi_scan_machine();

> > > -       dmi_memdev_walk();

> > > -       dmi_set_dump_stack_arch_desc();

> > > +       dmi_setup();

> > >         return 0;

> > >  }

> > >  core_initcall(run_dmi_scan);

> > > diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c

> > > index 3d872a527cd9..3773905cd2c1 100644

> > > --- a/arch/x86/kernel/setup.c

> > > +++ b/arch/x86/kernel/setup.c

> > > @@ -1005,13 +1005,11 @@ void __init setup_arch(char **cmdline_p)

> > >         if (efi_enabled(EFI_BOOT))

> > >                 efi_init();

> > >

> > > -       dmi_scan_machine();

> > > -       dmi_memdev_walk();

> > > -       dmi_set_dump_stack_arch_desc();

> > > +       dmi_setup();

> > >

> > >         /*

> > >          * VMware detection requires dmi to be available, so this

> > > -        * needs to be done after dmi_scan_machine(), for the boot CPU.

> > > +        * needs to be done after dmi_setup(), for the boot CPU.

> > >          */

> > >         init_hypervisor_platform();

> > >

> > > diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c

> > > index 099d83e4e910..fae2d5c43314 100644

> > > --- a/drivers/firmware/dmi_scan.c

> > > +++ b/drivers/firmware/dmi_scan.c

> > > @@ -416,11 +416,8 @@ static void __init save_mem_devices(const struct dmi_header *dm, void *v)

> > >         nr++;

> > >  }

> > >

> > > -void __init dmi_memdev_walk(void)

> > > +static void __init dmi_memdev_walk(void)

> > >  {

> > > -       if (!dmi_available)

> > > -               return;

> > > -

> > >         if (dmi_walk_early(count_mem_devices) == 0 && dmi_memdev_nr) {

> > >                 dmi_memdev = dmi_alloc(sizeof(*dmi_memdev) * dmi_memdev_nr);

> > >                 if (dmi_memdev)

> > > @@ -614,7 +611,7 @@ static int __init dmi_smbios3_present(const u8 *buf)

> > >         return 1;

> > >  }

> > >

> > > -void __init dmi_scan_machine(void)

> > > +static void __init dmi_scan_machine(void)

> > >  {

> > >         char __iomem *p, *q;

> > >         char buf[32];

> > > @@ -769,15 +766,20 @@ static int __init dmi_init(void)

> > >  subsys_initcall(dmi_init);

> > >

> > >  /**

> > > - * dmi_set_dump_stack_arch_desc - set arch description for dump_stack()

> > > + *     dmi_setup - scan and setup DMI system information

> > >   *

> > > - * Invoke dump_stack_set_arch_desc() with DMI system information so that

> > > - * DMI identifiers are printed out on task dumps.  Arch boot code should

> > > - * call this function after dmi_scan_machine() if it wants to print out DMI

> > > - * identifiers on task dumps.

> > > + *     Scan the DMI system information. This setups DMI identifiers

> > > + *     (dmi_system_id) for printing it out on task dumps and prepares

> > > + *     DIMM entry information (dmi_memdev_info) from the SMBIOS table

> > > + *     for using this when reporting memory errors.

> > >   */

> > > -void __init dmi_set_dump_stack_arch_desc(void)

> > > +void __init dmi_setup(void)

> > >  {

> > > +       dmi_scan_machine();

> > > +       if (!dmi_available)

> > > +               return;

> > > +

> > > +       dmi_memdev_walk();

> > >         dump_stack_set_arch_desc("%s", dmi_ids_string);

> > >  }

> > >

> > > @@ -841,7 +843,7 @@ static bool dmi_is_end_of_table(const struct dmi_system_id *dmi)

> > >   *     returns non zero or we hit the end. Callback function is called for

> > >   *     each successful match. Returns the number of matches.

> > >   *

> > > - *     dmi_scan_machine must be called before this function is called.

> > > + *     dmi_setup must be called before this function is called.

> > >   */

> > >  int dmi_check_system(const struct dmi_system_id *list)

> > >  {

> > > @@ -871,7 +873,7 @@ EXPORT_SYMBOL(dmi_check_system);

> > >   *     Walk the blacklist table until the first match is found.  Return the

> > >   *     pointer to the matching entry or NULL if there's no match.

> > >   *

> > > - *     dmi_scan_machine must be called before this function is called.

> > > + *     dmi_setup must be called before this function is called.

> > >   */

> > >  const struct dmi_system_id *dmi_first_match(const struct dmi_system_id *list)

> > >  {

> > > diff --git a/drivers/firmware/efi/arm-runtime.c b/drivers/firmware/efi/arm-runtime.c

> > > index 4a0dfe4ab829..e2ac5fa5531b 100644

> > > --- a/drivers/firmware/efi/arm-runtime.c

> > > +++ b/drivers/firmware/efi/arm-runtime.c

> > > @@ -162,14 +162,11 @@ void efi_virtmap_unload(void)

> > >  static int __init arm_dmi_init(void)

> > >  {

> > >         /*

> > > -        * On arm64/ARM, DMI depends on UEFI, and dmi_scan_machine() needs to

> > > +        * On arm64/ARM, DMI depends on UEFI, and dmi_setup() needs to

> > >          * be called early because dmi_id_init(), which is an arch_initcall

> > >          * itself, depends on dmi_scan_machine() having been called already.

> > >          */

> > > -       dmi_scan_machine();

> > > -       dmi_memdev_walk();

> > > -       if (dmi_available)

> > > -               dmi_set_dump_stack_arch_desc();

> > > +       dmi_setup();

> > >         return 0;

> > >  }

> > >  core_initcall(arm_dmi_init);

> > > diff --git a/include/linux/dmi.h b/include/linux/dmi.h

> > > index c46fdb36700b..8de8c4f15163 100644

> > > --- a/include/linux/dmi.h

> > > +++ b/include/linux/dmi.h

> > > @@ -102,9 +102,7 @@ const struct dmi_system_id *dmi_first_match(const struct dmi_system_id *list);

> > >  extern const char * dmi_get_system_info(int field);

> > >  extern const struct dmi_device * dmi_find_device(int type, const char *name,

> > >         const struct dmi_device *from);

> > > -extern void dmi_scan_machine(void);

> > > -extern void dmi_memdev_walk(void);

> > > -extern void dmi_set_dump_stack_arch_desc(void);

> > > +extern void dmi_setup(void);

> > >  extern bool dmi_get_date(int field, int *yearp, int *monthp, int *dayp);

> > >  extern int dmi_get_bios_year(void);

> > >  extern int dmi_name_in_vendors(const char *str);

> > > @@ -122,9 +120,7 @@ static inline int dmi_check_system(const struct dmi_system_id *list) { return 0;

> > >  static inline const char * dmi_get_system_info(int field) { return NULL; }

> > >  static inline const struct dmi_device * dmi_find_device(int type, const char *name,

> > >         const struct dmi_device *from) { return NULL; }

> > > -static inline void dmi_scan_machine(void) { return; }

> > > -static inline void dmi_memdev_walk(void) { }

> > > -static inline void dmi_set_dump_stack_arch_desc(void) { }

> > > +static inline void dmi_setup(void) { }

> > >  static inline bool dmi_get_date(int field, int *yearp, int *monthp, int *dayp)

> > >  {

> > >         if (yearp)

> > > --

> > > 2.20.1

> > >
Ard Biesheuvel March 21, 2019, 10:09 a.m. UTC | #4
On Thu, 21 Mar 2019 at 11:08, Robert Richter <rrichter@marvell.com> wrote:
>

> On 21.03.19 10:51:34, Ard Biesheuvel wrote:

> > On Thu, 21 Mar 2019 at 10:39, Robert Richter <rrichter@marvell.com> wrote:

> > >

> > > On 20.03.19 23:02:09, Ard Biesheuvel wrote:

> > > > On Wed, 20 Mar 2019 at 16:23, Robert Richter <rrichter@marvell.com> wrote:

> > > > >

> > > > > On 20.03.19 14:16:07, Robert Richter wrote:

> > > > > > On 20.03.19 13:05:37, Robert Richter wrote:

> > > > > > > @@ -167,6 +167,7 @@ static int __init arm_dmi_init(void)

> > > > > > >      * itself, depends on dmi_scan_machine() having been called already.

> > > > > > >      */

> > > > > > >     dmi_scan_machine();

> > > > > > > +   dmi_memdev_walk();

> > > > > > >     if (dmi_available)

> > > > > > >             dmi_set_dump_stack_arch_desc();

> > > > > > >     return 0;

> > > > > >

> > > > > > After

> > > > > >

> > > > > >  [PATCH] efi/arm: Show SMBIOS bank/device location in cper and

> > > > > >   ghes error logs

> > > > > >

> > > > > > wents in for arm/arm64, we can unify the code. See patch below.

> > > > >

> > > > > V2 with the fix in arm_dmi_init() below.

> > > > >

> > > > > -Robert

> > > > >

> > > > >

> > > > > -- >8 --

> > > > > From: Robert Richter <rrichter@marvell.com>

> > > > > Subject: [PATCH v2] efi: Unify dmi setup code over architectures arm/arm64,

> > > > >  io64 and x86

> > > > >

> > > > > All architectures (arm/arm64, io64 and x86) do the same here, so unify

> > > > > the code.

> > > > >

> > > > > Note: We do not need to call dump_stack_set_arch_desc() in case of

> > > > > !dmi_available. Both strings, dmi_ids_string and dump_stack_arch_

> > > > > desc_str are initialized zero and thus nothing would change.

> > > > >

> > > >

> > > > I don't understand the last sentence - we do not need to call

> > > > dump_stack_set_arch_desc() when !dmi_available, but we do so anyway,

> > > > right? Doesn't that wipe the arch description we set based on the DT

> > > > machine name?

> > >

> > > No, in dmi_setup() we exit early when !dmi_available. So for arm/arm64

> > > nothing changed. But for x86 and ia64 we no longer call dump_stack_

> > > set_arch_desc() in this case. This is ok since both strings,

> > > dmi_ids_string and dump_stack_arch_desc_str, are initialized zero and

> > > copying one to the other does not change anything.

> > >

> >

> > Ah, of course. Apologies for not reading more carefully.

> >

> > I'll take this patch via the EFI tree.

> >

> > It seems to me though that the previous patch makes the memdev_walk()

> > call unconditional for ARM, and this change subsequently makes it

> > dependent on dmi_available. Should we fix that?

>

> The first patch has the check in memdev_walk(). So that is looking

> good. The check is then moved to dmi_setup() in the 2nd patch.

>


OK, that works for me.

> Thanks for handling this.

>


Thanks for the contribution.
Ard Biesheuvel March 21, 2019, 10:14 a.m. UTC | #5
On Thu, 21 Mar 2019 at 11:11, Jean Delvare <jdelvare@suse.de> wrote:
>

> On Thu, 2019-03-21 at 10:51 +0100, Ard Biesheuvel wrote:

> > On Thu, 21 Mar 2019 at 10:39, Robert Richter <rrichter@marvell.com> wrote:

> > >

> > > On 20.03.19 23:02:09, Ard Biesheuvel wrote:

> > > > On Wed, 20 Mar 2019 at 16:23, Robert Richter <rrichter@marvell.com> wrote:

> > > > >

> > > > > On 20.03.19 14:16:07, Robert Richter wrote:

> > > > > > On 20.03.19 13:05:37, Robert Richter wrote:

> > > > > > > @@ -167,6 +167,7 @@ static int __init arm_dmi_init(void)

> > > > > > >      * itself, depends on dmi_scan_machine() having been called already.

> > > > > > >      */

> > > > > > >     dmi_scan_machine();

> > > > > > > +   dmi_memdev_walk();

> > > > > > >     if (dmi_available)

> > > > > > >             dmi_set_dump_stack_arch_desc();

> > > > > > >     return 0;

> > > > > >

> > > > > > After

> > > > > >

> > > > > >  [PATCH] efi/arm: Show SMBIOS bank/device location in cper and

> > > > > >   ghes error logs

> > > > > >

> > > > > > wents in for arm/arm64, we can unify the code. See patch below.

> > > > >

> > > > > V2 with the fix in arm_dmi_init() below.

> > > > >

> > > > > -Robert

> > > > >

> > > > >

> > > > > -- >8 --

> > > > > From: Robert Richter <rrichter@marvell.com>

> > > > > Subject: [PATCH v2] efi: Unify dmi setup code over architectures arm/arm64,

> > > > >  io64 and x86

> > > > >

> > > > > All architectures (arm/arm64, io64 and x86) do the same here, so unify

> > > > > the code.

> > > > >

> > > > > Note: We do not need to call dump_stack_set_arch_desc() in case of

> > > > > !dmi_available. Both strings, dmi_ids_string and dump_stack_arch_

> > > > > desc_str are initialized zero and thus nothing would change.

> > > > >

> > > >

> > > > I don't understand the last sentence - we do not need to call

> > > > dump_stack_set_arch_desc() when !dmi_available, but we do so anyway,

> > > > right? Doesn't that wipe the arch description we set based on the DT

> > > > machine name?

> > >

> > > No, in dmi_setup() we exit early when !dmi_available. So for arm/arm64

> > > nothing changed. But for x86 and ia64 we no longer call dump_stack_

> > > set_arch_desc() in this case. This is ok since both strings,

> > > dmi_ids_string and dump_stack_arch_desc_str, are initialized zero and

> > > copying one to the other does not change anything.

> > >

> >

> > Ah, of course. Apologies for not reading more carefully.

> >

> > I'll take this patch via the EFI tree.

>

> I like the idea. If this is not going through my tree then:

>

> Reviewed-by: Jean Delvare <jdelvare@suse.de>

>


Thanks Jean.
diff mbox series

Patch

diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index 583a3746d70b..c9cfa760cd57 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -1058,9 +1058,7 @@  check_bugs (void)
 
 static int __init run_dmi_scan(void)
 {
-	dmi_scan_machine();
-	dmi_memdev_walk();
-	dmi_set_dump_stack_arch_desc();
+	dmi_setup();
 	return 0;
 }
 core_initcall(run_dmi_scan);
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 3d872a527cd9..3773905cd2c1 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -1005,13 +1005,11 @@  void __init setup_arch(char **cmdline_p)
 	if (efi_enabled(EFI_BOOT))
 		efi_init();
 
-	dmi_scan_machine();
-	dmi_memdev_walk();
-	dmi_set_dump_stack_arch_desc();
+	dmi_setup();
 
 	/*
 	 * VMware detection requires dmi to be available, so this
-	 * needs to be done after dmi_scan_machine(), for the boot CPU.
+	 * needs to be done after dmi_setup(), for the boot CPU.
 	 */
 	init_hypervisor_platform();
 
diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c
index 099d83e4e910..fae2d5c43314 100644
--- a/drivers/firmware/dmi_scan.c
+++ b/drivers/firmware/dmi_scan.c
@@ -416,11 +416,8 @@  static void __init save_mem_devices(const struct dmi_header *dm, void *v)
 	nr++;
 }
 
-void __init dmi_memdev_walk(void)
+static void __init dmi_memdev_walk(void)
 {
-	if (!dmi_available)
-		return;
-
 	if (dmi_walk_early(count_mem_devices) == 0 && dmi_memdev_nr) {
 		dmi_memdev = dmi_alloc(sizeof(*dmi_memdev) * dmi_memdev_nr);
 		if (dmi_memdev)
@@ -614,7 +611,7 @@  static int __init dmi_smbios3_present(const u8 *buf)
 	return 1;
 }
 
-void __init dmi_scan_machine(void)
+static void __init dmi_scan_machine(void)
 {
 	char __iomem *p, *q;
 	char buf[32];
@@ -769,15 +766,20 @@  static int __init dmi_init(void)
 subsys_initcall(dmi_init);
 
 /**
- * dmi_set_dump_stack_arch_desc - set arch description for dump_stack()
+ *	dmi_setup - scan and setup DMI system information
  *
- * Invoke dump_stack_set_arch_desc() with DMI system information so that
- * DMI identifiers are printed out on task dumps.  Arch boot code should
- * call this function after dmi_scan_machine() if it wants to print out DMI
- * identifiers on task dumps.
+ *	Scan the DMI system information. This setups DMI identifiers
+ *	(dmi_system_id) for printing it out on task dumps and prepares
+ *	DIMM entry information (dmi_memdev_info) from the SMBIOS table
+ *	for using this when reporting memory errors.
  */
-void __init dmi_set_dump_stack_arch_desc(void)
+void __init dmi_setup(void)
 {
+	dmi_scan_machine();
+	if (!dmi_available)
+		return;
+
+	dmi_memdev_walk();
 	dump_stack_set_arch_desc("%s", dmi_ids_string);
 }
 
@@ -841,7 +843,7 @@  static bool dmi_is_end_of_table(const struct dmi_system_id *dmi)
  *	returns non zero or we hit the end. Callback function is called for
  *	each successful match. Returns the number of matches.
  *
- *	dmi_scan_machine must be called before this function is called.
+ *	dmi_setup must be called before this function is called.
  */
 int dmi_check_system(const struct dmi_system_id *list)
 {
@@ -871,7 +873,7 @@  EXPORT_SYMBOL(dmi_check_system);
  *	Walk the blacklist table until the first match is found.  Return the
  *	pointer to the matching entry or NULL if there's no match.
  *
- *	dmi_scan_machine must be called before this function is called.
+ *	dmi_setup must be called before this function is called.
  */
 const struct dmi_system_id *dmi_first_match(const struct dmi_system_id *list)
 {
diff --git a/drivers/firmware/efi/arm-runtime.c b/drivers/firmware/efi/arm-runtime.c
index 4a0dfe4ab829..e2ac5fa5531b 100644
--- a/drivers/firmware/efi/arm-runtime.c
+++ b/drivers/firmware/efi/arm-runtime.c
@@ -162,14 +162,11 @@  void efi_virtmap_unload(void)
 static int __init arm_dmi_init(void)
 {
 	/*
-	 * On arm64/ARM, DMI depends on UEFI, and dmi_scan_machine() needs to
+	 * On arm64/ARM, DMI depends on UEFI, and dmi_setup() needs to
 	 * be called early because dmi_id_init(), which is an arch_initcall
 	 * itself, depends on dmi_scan_machine() having been called already.
 	 */
-	dmi_scan_machine();
-	dmi_memdev_walk();
-	if (dmi_available)
-		dmi_set_dump_stack_arch_desc();
+	dmi_setup();
 	return 0;
 }
 core_initcall(arm_dmi_init);
diff --git a/include/linux/dmi.h b/include/linux/dmi.h
index c46fdb36700b..8de8c4f15163 100644
--- a/include/linux/dmi.h
+++ b/include/linux/dmi.h
@@ -102,9 +102,7 @@  const struct dmi_system_id *dmi_first_match(const struct dmi_system_id *list);
 extern const char * dmi_get_system_info(int field);
 extern const struct dmi_device * dmi_find_device(int type, const char *name,
 	const struct dmi_device *from);
-extern void dmi_scan_machine(void);
-extern void dmi_memdev_walk(void);
-extern void dmi_set_dump_stack_arch_desc(void);
+extern void dmi_setup(void);
 extern bool dmi_get_date(int field, int *yearp, int *monthp, int *dayp);
 extern int dmi_get_bios_year(void);
 extern int dmi_name_in_vendors(const char *str);
@@ -122,9 +120,7 @@  static inline int dmi_check_system(const struct dmi_system_id *list) { return 0;
 static inline const char * dmi_get_system_info(int field) { return NULL; }
 static inline const struct dmi_device * dmi_find_device(int type, const char *name,
 	const struct dmi_device *from) { return NULL; }
-static inline void dmi_scan_machine(void) { return; }
-static inline void dmi_memdev_walk(void) { }
-static inline void dmi_set_dump_stack_arch_desc(void) { }
+static inline void dmi_setup(void) { }
 static inline bool dmi_get_date(int field, int *yearp, int *monthp, int *dayp)
 {
 	if (yearp)