@@ -11,6 +11,10 @@
#define MAX_CLOCKS 16
+#define ADJ_ALL (ADJ_OFFSET | ADJ_FREQUENCY | ADJ_MAXERROR | \
+ ADJ_ESTERROR | ADJ_STATUS | ADJ_TIMECONST | \
+ ADJ_TICK)
+
#ifndef CLOCK_MONOTONIC_RAW
# define CLOCK_MONOTONIC_RAW 4
#endif
@@ -74,6 +74,9 @@ chroot02 chroot02
chroot03 chroot03
chroot04 chroot04
+clock_adjtime01 clock_adjtime01
+clock_adjtime02 clock_adjtime02
+
clock_getres01 clock_getres01
clock_nanosleep01 clock_nanosleep01
clock_nanosleep02 clock_nanosleep02
new file mode 100644
@@ -0,0 +1,2 @@
+clock_adjtime01
+clock_adjtime02
new file mode 100644
@@ -0,0 +1,10 @@
+# Copyright (c) 2019 - Linaro Limited. All rights reserved.
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+top_srcdir ?= ../../../..
+
+include $(top_srcdir)/include/mk/testcases.mk
+
+LDLIBS+=-lrt
+
+include $(top_srcdir)/include/mk/generic_leaf_target.mk
\ No newline at end of file
new file mode 100644
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2019 Linaro Limited. All rights reserved.
+ * Author: Rafael David Tinoco <rafael.tinoco@linaro.org>
+ */
+
+#include "config.h"
+#include "tst_test.h"
+#include "tst_timer.h"
+#include "tst_safe_clocks.h"
+#include "lapi/syscalls.h"
+#include "lapi/posix_clocks.h"
+#include <time.h>
+#include <pwd.h>
+#include <sys/timex.h>
+#include <sys/types.h>
+
+static int sys_clock_adjtime(clockid_t, struct timex *);
+static void timex_show(char *, struct timex);
+
+/*
+ * bad pointer w/ libc causes SIGSEGV signal, call syscall directly
+ */
+static int sys_clock_adjtime(clockid_t clk_id, struct timex *txc)
+{
+ return tst_syscall(__NR_clock_adjtime, clk_id, txc);
+}
+
+static void timex_show(char *given, struct timex txc)
+{
+ tst_res(TINFO, "%s\n"
+ " mode: %d\n"
+ " offset: %ld\n"
+ " frequency: %ld\n"
+ " maxerror: %ld\n"
+ " esterror: %ld\n"
+ " status: %d (0x%x)\n"
+ " time_constant: %ld\n"
+ " precision: %ld\n"
+ " tolerance: %ld\n"
+ " tick: %ld\n"
+ " raw time: %d(s) %d(us)",
+ given,
+ txc.modes,
+ txc.offset,
+ txc.freq,
+ txc.maxerror,
+ txc.esterror,
+ txc.status,
+ txc.status,
+ txc.constant,
+ txc.precision,
+ txc.tolerance,
+ txc.tick,
+ (int)txc.time.tv_sec,
+ (int)txc.time.tv_usec);
+}
new file mode 100644
@@ -0,0 +1,221 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2019 Linaro Limited. All rights reserved.
+ * Author: Rafael David Tinoco <rafael.tinoco@linaro.org>
+ */
+
+/*
+ * clock_adjtime() syscall might have as execution path:
+ *
+ * 1) a regular POSIX clock (only REALTIME clock implements adjtime())
+ * - will behave exactly like adjtimex() system call.
+ * - only one being tested here.
+ *
+ * 2) a dynamic POSIX clock (which ops are implemented by PTP clocks)
+ * - will trigger the PTP clock driver function "adjtime()"
+ * - different implementations from one PTP clock to another
+ * - might return EOPNOTSUPP (like ptp_kvm_caps, for example)
+ * - no entry point for clock_adjtime(), missing "CLOCK_PTP" model
+ *
+ * so it is sane to check possible adjustments:
+ *
+ * - ADJ_OFFSET - usec or nsec, kernel adjusts time gradually by offset
+ * (-512000 < offset < 512000)
+ * - ADJ_FREQUENCY - system clock frequency offset
+ * - ADJ_MAXERROR - maximum error (usec)
+ * - ADJ_ESTERROR - estimated time error in us
+ * - ADJ_STATUS - clock command/status of ntp implementation
+ * - ADJ_TIMECONST - PLL stiffness (jitter dependent) + poll int for PLL
+ * - ADJ_TICK - us between clock ticks
+ * (>= 900000/HZ, <= 1100000/HZ)
+ *
+ * and also the standalone ones (using .offset variable):
+ *
+ * - ADJ_OFFSET_SINGLESHOT - behave like adjtime()
+ * - ADJ_OFFSET_SS_READ - ret remaining time for completion after SINGLESHOT
+ *
+ * For ADJ_STATUS, consider the following flags:
+ *
+ * rw STA_PLL - enable phase-locked loop updates (ADJ_OFFSET)
+ * rw STA_PPSFREQ - enable PPS (pulse-per-second) freq discipline
+ * rw STA_PPSTIME - enable PPS time discipline
+ * rw STA_FLL - select freq-locked loop mode.
+ * rw STA_INS - ins leap sec after the last sec of UTC day (all days)
+ * rw STA_DEL - del leap sec at last sec of UTC day (all days)
+ * rw STA_UNSYNC - clock unsynced
+ * rw STA_FREQHOLD - hold freq. ADJ_OFFSET made w/out auto small adjs
+ * ro STA_PPSSIGNAL - valid PPS (pulse-per-second) signal is present
+ * ro STA_PPSJITTER - PPS signal jitter exceeded.
+ * ro STA_PPSWANDER - PPS signal wander exceeded.
+ * ro STA_PPSERROR - PPS signal calibration error.
+ * ro STA_CLOKERR - clock HW fault.
+ * ro STA_NANO - 0 = us, 1 = ns (set = ADJ_NANO, cl = ADJ_MICRO)
+ * rw STA_MODE - mode: 0 = phased locked loop. 1 = freq locked loop
+ * ro STA_CLK - clock source. unused.
+ */
+
+#include "clock_adjtime.h"
+
+static long hz;
+static struct timex saved, ttxc;
+
+struct test_case {
+ unsigned int modes;
+ long highlimit;
+ long *ptr;
+ long delta;
+};
+
+struct test_case tc[] = {
+ {
+ .modes = ADJ_OFFSET_SINGLESHOT,
+ },
+ {
+ .modes = ADJ_OFFSET_SS_READ,
+ },
+ {
+ .modes = ADJ_ALL,
+ },
+ {
+ .modes = ADJ_OFFSET,
+ .highlimit = 500000,
+ .ptr = &ttxc.offset,
+ .delta = 10000,
+ },
+ {
+ .modes = ADJ_FREQUENCY,
+ .ptr = &ttxc.freq,
+ .delta = 100,
+ },
+ {
+ .modes = ADJ_MAXERROR,
+ .ptr = &ttxc.maxerror,
+ .delta = 100,
+ },
+ {
+ .modes = ADJ_ESTERROR,
+ .ptr = &ttxc.esterror,
+ .delta = 100,
+ },
+ {
+ .modes = ADJ_TIMECONST,
+ .ptr = &ttxc.constant,
+ .delta = 1,
+ },
+ {
+ .modes = ADJ_TICK,
+ .highlimit = 1100000,
+ .ptr = &ttxc.tick,
+ .delta = 1000,
+ },
+};
+
+static void verify_clock_adjtime(unsigned int i)
+{
+ long ptroff, *ptr = NULL;
+ struct timex verify;
+
+ memset(&ttxc, 0, sizeof(struct timex));
+ memset(&verify, 0, sizeof(struct timex));
+
+ SAFE_CLOCK_ADJTIME(CLOCK_REALTIME, &ttxc);
+ timex_show("GET", ttxc);
+
+ ttxc.modes = tc[i].modes;
+
+ if (tc[i].ptr && tc[i].delta) {
+
+ *tc[i].ptr += tc[i].delta;
+
+ /* fix limits, if existent, so no errors occur */
+
+ if (tc[i].highlimit) {
+ if (*tc[i].ptr >= tc[i].highlimit)
+ *tc[i].ptr = tc[i].highlimit;
+ }
+ }
+
+ SAFE_CLOCK_ADJTIME(CLOCK_REALTIME, &ttxc);
+ timex_show("SET", ttxc);
+
+ if (tc[i].ptr) {
+
+ /* adjtimex field being tested so we can verify later */
+
+ ptroff = (long) tc[i].ptr - (long) &ttxc;
+ ptr = (void *) &verify + ptroff;
+ }
+
+ TEST(sys_clock_adjtime(CLOCK_REALTIME, &verify));
+ timex_show("VERIFY", verify);
+
+ if (tc[i].ptr && *tc[i].ptr != *ptr) {
+ tst_res(TFAIL, "clock_adjtime(): could not set value (mode=%x)",
+ tc[i].modes);
+ }
+
+ if (TST_RET < 0) {
+ tst_res(TFAIL | TTERRNO, "clock_adjtime(): mode=%x, returned "
+ "error", tc[i].modes);
+ }
+
+ tst_res(TPASS, "clock_adjtime(): success (mode=%x)", tc[i].modes);
+}
+
+static void setup(void)
+{
+ size_t i;
+ int rval;
+
+ rval = SAFE_CLOCK_ADJTIME(CLOCK_REALTIME, &saved);
+
+ if (rval != TIME_OK && rval != TIME_ERROR) {
+ timex_show("SAVE_STATUS", saved);
+ tst_brk(TBROK | TTERRNO, "clock has on-going leap changes, "
+ "returned: %i", rval);
+ }
+
+ hz = SAFE_SYSCONF(_SC_CLK_TCK);
+
+ for (i = 0; i < ARRAY_SIZE(tc); i++) {
+
+ /* fix high and low limits by dividing it per HZ value */
+
+ if (tc[i].modes == ADJ_TICK)
+ tc[i].highlimit /= hz;
+
+ /* fix usec as being test default resolution */
+
+ if (saved.modes & ADJ_NANO) {
+ if (tc[i].modes == ADJ_OFFSET) {
+ tc[i].highlimit *= 1000;
+ tc[i].delta *= 1000;
+ }
+ }
+ }
+}
+
+static void cleanup(void)
+{
+ saved.modes = ADJ_ALL;
+
+ /* restore clock resolution based on original status flag */
+
+ if (saved.status & STA_NANO)
+ saved.modes |= ADJ_NANO;
+ else
+ saved.modes |= ADJ_MICRO;
+
+ /* restore original clock flags */
+
+ SAFE_CLOCK_ADJTIME(CLOCK_REALTIME, &saved);
+}
+
+static struct tst_test test = {
+ .test = verify_clock_adjtime,
+ .setup = setup,
+ .cleanup = cleanup,
+ .tcnt = ARRAY_SIZE(tc),
+ .needs_root = 1,
+ .restore_wallclock = 1,
+};
new file mode 100644
@@ -0,0 +1,221 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2019 Linaro Limited. All rights reserved.
+ * Author: Rafael David Tinoco <rafael.tinoco@linaro.org>
+ */
+
+/*
+ * clock_adjtime() syscall might have as execution path:
+ *
+ * 1) a regular POSIX clock (only REALTIME clock implements adjtime())
+ * - will behave exactly like adjtimex() system call.
+ * - only one being tested here.
+ *
+ * 2) a dynamic POSIX clock (which ops are implemented by PTP clocks)
+ * - will trigger the PTP clock driver function "adjtime()"
+ * - different implementations from one PTP clock to another
+ * - might return EOPNOTSUPP (like ptp_kvm_caps, for example)
+ * - no entry point for clock_adjtime(), missing "CLOCK_PTP" model
+ *
+ * so it is sane to check for the following errors:
+ *
+ * EINVAL - clock id being used does not exist
+ *
+ * EFAULT - (struct timex *) does not point to valid memory
+ *
+ * EINVAL - ADJ_OFFSET + .offset outside range -512000 < x < 512000
+ * (after 2.6.26, kernels normalize to the limit if outside range)
+ *
+ * EINVAL - ADJ_FREQUENCY + .freq outside range -32768000 < x < 3276800
+ * (after 2.6.26, kernels normalize to the limit if outside range)
+ *
+ * EINVAL - .tick outside permitted range (900000/HZ < .tick < 1100000/HZ)
+ *
+ * EPERM - .modes is neither 0 nor ADJ_OFFSET_SS_READ (CAP_SYS_TIME required)
+ *
+ * EINVAL - .status other than those listed bellow
+ *
+ * For ADJ_STATUS, consider the following flags:
+ *
+ * rw STA_PLL - enable phase-locked loop updates (ADJ_OFFSET)
+ * rw STA_PPSFREQ - enable PPS (pulse-per-second) freq discipline
+ * rw STA_PPSTIME - enable PPS time discipline
+ * rw STA_FLL - select freq-locked loop mode.
+ * rw STA_INS - ins leap sec after the last sec of UTC day (all days)
+ * rw STA_DEL - del leap sec at last sec of UTC day (all days)
+ * rw STA_UNSYNC - clock unsynced
+ * rw STA_FREQHOLD - hold freq. ADJ_OFFSET made w/out auto small adjs
+ * ro STA_PPSSIGNAL - valid PPS (pulse-per-second) signal is present
+ * ro STA_PPSJITTER - PPS signal jitter exceeded.
+ * ro STA_PPSWANDER - PPS signal wander exceeded.
+ * ro STA_PPSERROR - PPS signal calibration error.
+ * ro STA_CLOKERR - clock HW fault.
+ * ro STA_NANO - 0 = us, 1 = ns (set = ADJ_NANO, cl = ADJ_MICRO)
+ * rw STA_MODE - mode: 0 = phased locked loop. 1 = freq locked loop
+ * ro STA_CLK - clock source. unused.
+ */
+
+#include "clock_adjtime.h"
+
+static long hz;
+static struct timex saved, ttxc;
+
+static void cleanup(void);
+
+struct test_case {
+ clockid_t clktype;
+ unsigned int modes;
+ long lowlimit;
+ long highlimit;
+ long *ptr;
+ long delta;
+ int exp_err;
+ int droproot;
+};
+
+struct test_case tc[] = {
+ {
+ .clktype = MAX_CLOCKS,
+ .exp_err = EINVAL,
+ },
+ {
+ .clktype = MAX_CLOCKS + 1,
+ .exp_err = EINVAL,
+ },
+ {
+ .clktype = CLOCK_REALTIME,
+ .modes = ADJ_ALL,
+ .exp_err = EFAULT,
+ },
+ {
+ .clktype = CLOCK_REALTIME,
+ .modes = ADJ_TICK,
+ .lowlimit = 900000,
+ .ptr = &ttxc.tick,
+ .delta = 1,
+ .exp_err = EINVAL,
+ },
+ {
+ .clktype = CLOCK_REALTIME,
+ .modes = ADJ_TICK,
+ .highlimit = 1100000,
+ .ptr = &ttxc.tick,
+ .delta = 1,
+ .exp_err = EINVAL,
+ },
+ {
+ .clktype = CLOCK_REALTIME,
+ .modes = ADJ_ALL,
+ .exp_err = EPERM,
+ .droproot = 1,
+ },
+};
+
+static void verify_clock_adjtime(unsigned int i)
+{
+ uid_t whoami = 0;
+ struct timex *txcptr;
+ struct passwd *nobody;
+ static const char name[] = "nobody";
+
+ txcptr = &ttxc;
+
+ memset(txcptr, 0, sizeof(struct timex));
+
+ SAFE_CLOCK_ADJTIME(CLOCK_REALTIME, txcptr);
+ timex_show("GET", *txcptr);
+
+ if (tc[i].droproot) {
+ nobody = SAFE_GETPWNAM(name);
+ whoami = nobody->pw_uid;
+ SAFE_SETEUID(whoami);
+ }
+
+ txcptr->modes = tc[i].modes;
+
+ if (tc[i].ptr) {
+
+ if (tc[i].lowlimit)
+ *tc[i].ptr = tc[i].lowlimit - tc[i].delta;
+
+ if (tc[i].highlimit)
+ *tc[i].ptr = tc[i].highlimit + tc[i].delta;
+ }
+
+ /* special case: EFAULT for bad addresses */
+ if (tc[i].exp_err == EFAULT)
+ txcptr = tst_get_bad_addr(cleanup);
+
+ TEST(sys_clock_adjtime(tc[i].clktype, txcptr));
+ if (txcptr && tc[i].exp_err != EFAULT)
+ timex_show("TEST", *txcptr);
+
+ if (TST_RET >= 0) {
+ tst_res(TFAIL, "clock_adjtime(): passed unexpectedly (mode=%x, "
+ "uid=%d)", tc[i].modes, whoami);
+ return;
+ }
+
+ if (tc[i].exp_err != TST_ERR) {
+ tst_res(TFAIL | TTERRNO, "clock_adjtime(): expected %d but "
+ "failed with %d (mode=%x, uid=%d)",
+ tc[i].exp_err, TST_ERR, tc[i].modes, whoami);
+ return;
+ }
+
+ tst_res(TPASS, "clock_adjtime(): failed as expected (mode=0x%x, "
+ "uid=%d)", tc[i].modes, whoami);
+
+ if (tc[i].droproot)
+ SAFE_SETEUID(0);
+}
+
+static void setup(void)
+{
+ size_t i;
+ int rval;
+
+ rval = SAFE_CLOCK_ADJTIME(CLOCK_REALTIME, &saved);
+
+ if (rval != TIME_OK && rval != TIME_ERROR) {
+ timex_show("SAVE_STATUS", saved);
+ tst_brk(TBROK | TTERRNO, "clock has on-going leap changes, "
+ "returned: %i", rval);
+ }
+
+ hz = SAFE_SYSCONF(_SC_CLK_TCK);
+
+ /* fix high and low limits by dividing it per HZ value */
+
+ for (i = 0; i < ARRAY_SIZE(tc); i++) {
+ if (tc[i].modes == ADJ_TICK) {
+ tc[i].highlimit /= hz;
+ tc[i].lowlimit /= hz;
+ }
+ }
+}
+
+static void cleanup(void)
+{
+ saved.modes = ADJ_ALL;
+
+ /* restore clock resolution based on original status flag */
+
+ if (saved.status & STA_NANO)
+ saved.modes |= ADJ_NANO;
+ else
+ saved.modes |= ADJ_MICRO;
+
+ /* restore original clock flags */
+
+ SAFE_CLOCK_ADJTIME(CLOCK_REALTIME, &saved);
+}
+
+static struct tst_test test = {
+ .test = verify_clock_adjtime,
+ .setup = setup,
+ .cleanup = cleanup,
+ .tcnt = ARRAY_SIZE(tc),
+ .needs_root = 1,
+ .restore_wallclock = 1,
+};
Fixes: 270 clock_adjtime{01,02} are created using the new API, based on existing adjtimex(2) tests. clock_adjtime() syscall might have as execution path: 1) a regular POSIX clock (only REALTIME clock implements adjtime()) - will behave exactly like adjtimex() system call. - only one being tested here. 2) a dynamic POSIX clock (which ops are implemented by PTP clocks) - will trigger the PTP clock driver function "adjtime()" - different implementations from one PTP clock to another - might return EOPNOTSUPP (like ptp_kvm_caps, for example) - no observed execution entry point for clock_adjtime() Signed-off-by: Rafael David Tinoco <rafael.tinoco@linaro.org> --- include/lapi/posix_clocks.h | 4 + runtest/syscalls | 3 + .../kernel/syscalls/clock_adjtime/.gitignore | 2 + .../kernel/syscalls/clock_adjtime/Makefile | 10 + .../syscalls/clock_adjtime/clock_adjtime.h | 57 +++++ .../syscalls/clock_adjtime/clock_adjtime01.c | 221 ++++++++++++++++++ .../syscalls/clock_adjtime/clock_adjtime02.c | 221 ++++++++++++++++++ 7 files changed, 518 insertions(+) create mode 100644 testcases/kernel/syscalls/clock_adjtime/.gitignore create mode 100644 testcases/kernel/syscalls/clock_adjtime/Makefile create mode 100644 testcases/kernel/syscalls/clock_adjtime/clock_adjtime.h create mode 100644 testcases/kernel/syscalls/clock_adjtime/clock_adjtime01.c create mode 100644 testcases/kernel/syscalls/clock_adjtime/clock_adjtime02.c