@@ -25,6 +25,12 @@ Required properties:
Optional property:
- enable-gpios: A GPIO specifier for hardware enable pin.
+ - ramp-up-ms: Current ramping from one brightness level to
+ the a higher brightness level.
+ Range from 2048 us - 117.44 s
+ - ramp-down-ms: Current ramping from one brightness level to
+ the a lower brightness level.
+ Range from 2048 us - 117.44 s
Required node:
- backlight: All LMU devices have backlight child nodes.
@@ -90,7 +96,7 @@ lm3631@29 {
lcd_bl {
led-sources = <0 1>;
- ramp-up-msec = <300>;
+ ramp-up-ms = <300>;
};
};
};
@@ -152,15 +158,15 @@ lm3633@36 {
main {
label = "main_lcd";
led-sources = <1 2>;
- ramp-up-msec = <500>;
- ramp-down-msec = <500>;
+ ramp-up-ms = <500>;
+ ramp-down-ms = <500>;
};
front {
label = "front_lcd";
led-sources = <0>;
- ramp-up-msec = <1000>;
- ramp-down-msec = <0>;
+ ramp-up-ms = <1000>;
+ ramp-down-ms = <0>;
};
};
@@ -212,8 +218,8 @@ lm3697@36 {
lcd {
led-sources = <0 1 2>;
- ramp-up-msec = <200>;
- ramp-down-msec = <200>;
+ ramp-up-ms = <200>;
+ ramp-down-ms = <200>;
};
};
Document the ramp-up and ramp-down property in the binding. Removing the "sec" from the property definition as seconds is implied. Signed-off-by: Dan Murphy <dmurphy@ti.com> --- v2 - Fixed commit message as this was not just a modification but adding documentation https://lore.kernel.org/patchwork/patch/1054504/ .../devicetree/bindings/mfd/ti-lmu.txt | 20 ++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-) -- 2.19.0