[3/6] scsi: libsas: Improve vague log in SAS rediscovery

Message ID 1555059478-36224-4-git-send-email-john.garry@huawei.com
State New
Headers show
Series
  • Untitled series #19811
Related show

Commit Message

John Garry April 12, 2019, 8:57 a.m.
When an expander PHY which was part of a wideport disconnects, we would
see a log like this from sas_rediscover():
[   39.695554] sas: phy20 part of wide port with phy16

Here, phy20 is the PHY that disconnected, and phy16 is the lowest indexed
member PHY of the wideport.

The log implies the phy20 is still part of the wideport with phy16, so
is misleading or, at least, vague.

Improve the logs in SAS rediscovery by removing this log and adding
a log in sas_rediscover_dev() to tell what's really going on.

While we're at it, also make the logs in sas_find_bcast_dev() more
informative (and more consistent with the reset of the expander logs).

Signed-off-by: John Garry <john.garry@huawei.com>

---
 drivers/scsi/libsas/sas_expander.c | 20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)

-- 
2.17.1

Patch

diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index dfdf3c94d326..6f569a65d791 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -1876,10 +1876,12 @@  static int sas_find_bcast_dev(struct domain_device *dev,
 		if (phy_id != -1) {
 			*src_dev = dev;
 			ex->ex_change_count = ex_change_count;
-			pr_info("Expander phy change count has changed\n");
+			pr_info("ex %016llx phy%d change count has changed\n",
+				SAS_ADDR(dev->sas_addr), phy_id);
 			return res;
 		} else
-			pr_info("Expander phys DID NOT change\n");
+			pr_info("ex %016llx phys DID NOT change\n",
+				SAS_ADDR(dev->sas_addr));
 	}
 	list_for_each_entry(ch, &ex->children, siblings) {
 		if (ch->dev_type == SAS_EDGE_EXPANDER_DEVICE || ch->dev_type == SAS_FANOUT_EXPANDER_DEVICE) {
@@ -2028,14 +2030,22 @@  static bool dev_type_flutter(enum sas_device_type new, enum sas_device_type old)
 	return false;
 }
 
-static int sas_rediscover_dev(struct domain_device *dev, int phy_id, bool last)
+static int sas_rediscover_dev(struct domain_device *dev, int phy_id,
+			      bool last, int sibling)
 {
 	struct expander_device *ex = &dev->ex_dev;
 	struct ex_phy *phy = &ex->ex_phy[phy_id];
 	enum sas_device_type type = SAS_PHY_UNUSED;
 	u8 sas_addr[SAS_ADDR_SIZE];
+	char msg[80] = "";
 	int res;
 
+	if (!last)
+		sprintf(msg, ", part of a wide port with phy%d", sibling);
+
+	pr_debug("ex %016llx rediscovering phy%d%s\n", SAS_ADDR(dev->sas_addr),
+		 phy_id, msg);
+
 	memset(sas_addr, 0, SAS_ADDR_SIZE);
 	res = sas_get_phy_attached_dev(dev, phy_id, sas_addr, &type);
 	switch (res) {
@@ -2115,13 +2125,11 @@  static int sas_rediscover(struct domain_device *dev, const int phy_id)
 				continue;
 			if (SAS_ADDR(phy->attached_sas_addr) ==
 			    SAS_ADDR(changed_phy->attached_sas_addr)) {
-				pr_debug("phy%d part of wide port with phy%d\n",
-					 phy_id, i);
 				last = false;
 				break;
 			}
 		}
-		res = sas_rediscover_dev(dev, phy_id, last);
+		res = sas_rediscover_dev(dev, phy_id, last, i);
 	} else
 		res = sas_discover_new(dev, phy_id);
 	return res;