[RESEND,07/20] nvmem: sunxi_sid: Read out data in native format

Message ID 20190413103305.9576-8-srinivas.kandagatla@linaro.org
State New
Headers show
Series
  • nvmem: patches(set 1) for 5.2
Related show

Commit Message

Srinivas Kandagatla April 13, 2019, 10:32 a.m.
From: Chen-Yu Tsai <wens@csie.org>


Originally the SID e-fuses were thought to be in big-endian format.
Later sources show that they are in fact native or little-endian.
The most compelling evidence is the thermal sensor calibration data,
which is a set of one to three 16-bit values. In native-endian they
are in 16-bit cells with increasing offsets, whereas with big-endian
they are in the wrong order, and a gap with no data will show if there
are one or three cells.

Switch to a native endian representation for the nvmem device. For the
H3, the register read-out method was already returning data in native
endian. This only affects the other SoCs.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>

Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

---
 drivers/nvmem/sunxi_sid.c | 23 +----------------------
 1 file changed, 1 insertion(+), 22 deletions(-)

-- 
2.21.0

Patch

diff --git a/drivers/nvmem/sunxi_sid.c b/drivers/nvmem/sunxi_sid.c
index 75c1f48cb3d0..14c114620ed6 100644
--- a/drivers/nvmem/sunxi_sid.c
+++ b/drivers/nvmem/sunxi_sid.c
@@ -46,33 +46,12 @@  struct sunxi_sid {
 	u32			value_offset;
 };
 
-/* We read the entire key, due to a 32 bit read alignment requirement. Since we
- * want to return the requested byte, this results in somewhat slower code and
- * uses 4 times more reads as needed but keeps code simpler. Since the SID is
- * only very rarely probed, this is not really an issue.
- */
-static u8 sunxi_sid_read_byte(const struct sunxi_sid *sid,
-			      const unsigned int offset)
-{
-	u32 sid_key;
-
-	sid_key = ioread32be(sid->base + round_down(offset, 4));
-	sid_key >>= (offset % 4) * 8;
-
-	return sid_key; /* Only return the last byte */
-}
-
 static int sunxi_sid_read(void *context, unsigned int offset,
 			  void *val, size_t bytes)
 {
 	struct sunxi_sid *sid = context;
-	u8 *buf = val;
-
-	/* Offset the read operation to the real position of SID */
-	offset += sid->value_offset;
 
-	while (bytes--)
-		*buf++ = sunxi_sid_read_byte(sid, offset++);
+	memcpy_fromio(val, sid->base + sid->value_offset + offset, bytes);
 
 	return 0;
 }