[v2,3/5] OPP: Add support for parsing the interconnect bandwidth

Message ID 20190423132823.7915-4-georgi.djakov@linaro.org
State New
Headers show
Series
  • Introduce OPP bandwidth bindings
Related show

Commit Message

Georgi Djakov April 23, 2019, 1:28 p.m.
The OPP bindings now support bandwidth values, so add support to parse it
from device tree and store it into the new dev_pm_opp_icc_bw struct, which
is part of the dev_pm_opp.

Also add and export the dev_pm_opp_set_paths() and dev_pm_opp_put_paths()
helpers, to set (and release) an interconnect paths to a device. The
bandwidth of these paths will be updated when the OPPs are switched.

Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>

---
 drivers/opp/core.c     |  87 ++++++++++++++++++++++++++++++++++-
 drivers/opp/of.c       | 102 +++++++++++++++++++++++++++++++++++++++++
 drivers/opp/opp.h      |   9 ++++
 include/linux/pm_opp.h |  14 ++++++
 4 files changed, 210 insertions(+), 2 deletions(-)

Comments

Viresh Kumar April 24, 2019, 5:52 a.m. | #1
On 23-04-19, 16:28, Georgi Djakov wrote:
> The OPP bindings now support bandwidth values, so add support to parse it

> from device tree and store it into the new dev_pm_opp_icc_bw struct, which

> is part of the dev_pm_opp.

> 

> Also add and export the dev_pm_opp_set_paths() and dev_pm_opp_put_paths()

> helpers, to set (and release) an interconnect paths to a device. The

> bandwidth of these paths will be updated when the OPPs are switched.

> 

> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>

> ---

>  drivers/opp/core.c     |  87 ++++++++++++++++++++++++++++++++++-

>  drivers/opp/of.c       | 102 +++++++++++++++++++++++++++++++++++++++++

>  drivers/opp/opp.h      |   9 ++++

>  include/linux/pm_opp.h |  14 ++++++

>  4 files changed, 210 insertions(+), 2 deletions(-)

> 

> diff --git a/drivers/opp/core.c b/drivers/opp/core.c

> index 0420f7e8ad5b..97ee39ecdebd 100644

> --- a/drivers/opp/core.c

> +++ b/drivers/opp/core.c

> @@ -19,6 +19,7 @@

>  #include <linux/slab.h>

>  #include <linux/device.h>

>  #include <linux/export.h>

> +#include <linux/interconnect.h>


Just include this once in opp.h and the other .c files won't need it.

>  #include <linux/pm_domain.h>

>  #include <linux/regulator/consumer.h>

>  

> @@ -876,6 +877,8 @@ static struct opp_table *_allocate_opp_table(struct device *dev, int index)

>  				ret);

>  	}

>  

> +	_of_find_paths(opp_table, dev);

> +

>  	BLOCKING_INIT_NOTIFIER_HEAD(&opp_table->head);

>  	INIT_LIST_HEAD(&opp_table->opp_list);

>  	kref_init(&opp_table->kref);

> @@ -1129,11 +1132,12 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_remove_all_dynamic);

>  struct dev_pm_opp *_opp_allocate(struct opp_table *table)

>  {

>  	struct dev_pm_opp *opp;

> -	int count, supply_size;

> +	int count, supply_size, icc_size;

>  

>  	/* Allocate space for at least one supply */

>  	count = table->regulator_count > 0 ? table->regulator_count : 1;

>  	supply_size = sizeof(*opp->supplies) * count;

> +	icc_size = sizeof(*opp->bandwidth) * table->path_count;

>  

>  	/* allocate new OPP node and supplies structures */

>  	opp = kzalloc(sizeof(*opp) + supply_size, GFP_KERNEL);


You never updated this to include icc_size :(

> @@ -1141,7 +1145,8 @@ struct dev_pm_opp *_opp_allocate(struct opp_table *table)

>  		return NULL;

>  

>  	/* Put the supplies at the end of the OPP structure as an empty array */

> -	opp->supplies = (struct dev_pm_opp_supply *)(opp + 1);

> +	opp->bandwidth = (struct dev_pm_opp_icc_bw *)(opp + 1);


Keep the order as supplies and then bandwidth.

> +	opp->supplies = (struct dev_pm_opp_supply *)(opp + icc_size + 1);


Did you check what address gets assigned here ? I think the pointer
addition will screw things up for you.

>  	INIT_LIST_HEAD(&opp->node);

>  

>  	return opp;

> @@ -1637,6 +1642,84 @@ void dev_pm_opp_put_clkname(struct opp_table *opp_table)

>  }

>  EXPORT_SYMBOL_GPL(dev_pm_opp_put_clkname);

>  

> +/**

> + * dev_pm_opp_set_paths() - Set interconnect path for a device

> + * @dev: Device for which interconnect path is being set.

> + *

> + * This must be called before any OPPs are initialized for the device.

> + */

> +struct opp_table *dev_pm_opp_set_paths(struct device *dev)


I got a bit confused. Why is this routine required exactly as
_of_find_paths() would have already done something similar ?

> +{

> +	struct opp_table *opp_table;

> +	int ret, i;

> +

> +	opp_table = dev_pm_opp_get_opp_table(dev);

> +	if (!opp_table)

> +		return ERR_PTR(-ENOMEM);

> +

> +	/* This should be called before OPPs are initialized */

> +	if (WARN_ON(!list_empty(&opp_table->opp_list))) {

> +		ret = -EBUSY;

> +		goto err;

> +	}

> +

> +	/* Another CPU that shares the OPP table has set the path */

> +	if (opp_table->paths)

> +		return opp_table;

> +

> +	opp_table->paths = kmalloc_array(opp_table->path_count,

> +					 sizeof(*opp_table->paths), GFP_KERNEL);

> +

> +	/* Find interconnect path(s) for the device */

> +	for (i = 0; i < opp_table->path_count; i++) {

> +		opp_table->paths[i] = of_icc_get_by_index(dev, i);

> +		if (IS_ERR(opp_table->paths[i])) {

> +			ret = PTR_ERR(opp_table->paths[i]);

> +			if (ret != -EPROBE_DEFER)

> +				dev_err(dev, "%s: Couldn't find path%d: %d\n",

> +					__func__, i, ret);

> +			goto err;

> +		}

> +	}

> +

> +	return opp_table;

> +

> +err:

> +	dev_pm_opp_put_opp_table(opp_table);

> +

> +	return ERR_PTR(ret);

> +}

> +EXPORT_SYMBOL_GPL(dev_pm_opp_set_paths);

> +

> +/**

> + * dev_pm_opp_put_paths() - Release interconnect path resources

> + * @opp_table: OPP table returned from dev_pm_opp_set_paths().

> + */

> +void dev_pm_opp_put_paths(struct opp_table *opp_table)

> +{

> +	int i;

> +

> +	if (!opp_table->paths) {

> +		pr_err("%s: Doesn't have paths set\n", __func__);

> +		return;

> +	}

> +

> +	/* Make sure there are no concurrent readers while updating opp_table */

> +	WARN_ON(!list_empty(&opp_table->opp_list));

> +

> +	for (i = opp_table->path_count - 1; i >= 0; i--)

> +		icc_put(opp_table->paths[i]);

> +

> +	_free_set_opp_data(opp_table);

> +

> +	kfree(opp_table->paths);

> +	opp_table->paths = NULL;

> +	opp_table->path_count = 0;

> +

> +	dev_pm_opp_put_opp_table(opp_table);

> +}

> +EXPORT_SYMBOL_GPL(dev_pm_opp_put_paths);

> +

>  /**

>   * dev_pm_opp_register_set_opp_helper() - Register custom set OPP helper

>   * @dev: Device for which the helper is getting registered.

> diff --git a/drivers/opp/of.c b/drivers/opp/of.c

> index c10c782d15aa..00af23280bc6 100644

> --- a/drivers/opp/of.c

> +++ b/drivers/opp/of.c

> @@ -16,6 +16,7 @@

>  #include <linux/cpu.h>

>  #include <linux/errno.h>

>  #include <linux/device.h>

> +#include <linux/interconnect.h>

>  #include <linux/of_device.h>

>  #include <linux/pm_domain.h>

>  #include <linux/slab.h>

> @@ -363,6 +364,45 @@ static int _of_opp_alloc_required_opps(struct opp_table *opp_table,

>  	return ret;

>  }

>  

> +int _of_find_paths(struct opp_table *opp_table, struct device *dev)

> +{

> +	struct device_node *np;

> +	int ret, i, count, num_paths;

> +

> +	np = of_node_get(dev->of_node);

> +	if (np) {


I would rather do:

        if (!np)
                return 0;

That will kill unnecessary line breaks and indentation.

> +		count = of_count_phandle_with_args(np, "interconnects",

> +						   "#interconnect-cells");


You can do of_node_put() right here as it isn't used afterwards.

> +		if (count % 2) {


Shouldn't this be 4 instead of 2 ? Each path is represented as:

<&noc MASTER_CPU &noc SLAVE_DDR>

which has 4 fields.

> +			dev_err(dev, "%s: Invalid interconnects values\n",

> +				__func__);

> +			ret = -EINVAL;

> +			goto put_of_node;

> +		}

> +

> +		num_paths = count / 2;

> +		opp_table->paths = kcalloc(num_paths, sizeof(*opp_table->paths),

> +					   GFP_KERNEL);

> +		if (!opp_table->paths) {

> +			ret = -ENOMEM;

> +			goto put_of_node;

> +		}

> +

> +		for (i = 0; i < num_paths; i++)

> +			opp_table->paths[i] = of_icc_get_by_index(dev, i);

> +

> +		opp_table->path_count = num_paths;

> +		of_node_put(np);

> +	}

> +

> +	return 0;

> +

> +put_of_node:

> +	of_node_put(np);

> +

> +	return ret;

> +}

> +

>  static bool _opp_is_supported(struct device *dev, struct opp_table *opp_table,

>  			      struct device_node *np)

>  {

> @@ -539,6 +579,64 @@ static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev,

>  	return ret;

>  }

>  

> +static int opp_parse_icc_bw(struct dev_pm_opp *opp, struct device *dev,

> +			    struct opp_table *opp_table)

> +{

> +	struct property *prop = NULL;

> +	u32 *bandwidth;

> +	char name[] = "bandwidth-MBps";

> +	int count, i, j, ret;

> +

> +	/* Search for "bandwidth-MBps" */

> +	prop = of_find_property(opp->np, name, NULL);

> +

> +	/* Missing property is not a problem */

> +	if (!prop) {

> +		dev_dbg(dev, "%s: Missing %s property\n", __func__, name);

> +		return 0;

> +	}

> +

> +	if (!prop->value) {

> +		dev_dbg(dev, "%s: Missing %s value\n", __func__, name);

> +		return -ENODATA;

> +	}

> +

> +	/*

> +	 * Bandwidth consists of average and peak values like:

> +	 * bandwidth-MBps = <avg-MBps peak-MBps>

> +	 */

> +	count = prop->length / sizeof(u32);

> +	if (count % 2) {

> +		dev_err(dev, "%s: Invalid %s values\n", __func__, name);

> +		return -EINVAL;

> +	}

> +

> +	if (opp_table->path_count != count / 2) {

> +		dev_err(dev, "%s Mismatch between values and paths (%d %d)\n",

> +			__func__, opp_table->path_count, count / 2);

> +		return -EINVAL;

> +	}

> +

> +	bandwidth = kmalloc_array(count, sizeof(*bandwidth), GFP_KERNEL);

> +	if (!bandwidth)

> +		return -ENOMEM;

> +

> +	ret = of_property_read_u32_array(opp->np, name, bandwidth, count);

> +	if (ret) {

> +		dev_err(dev, "%s: Error parsing %s: %d\n", __func__, name, ret);

> +		goto free_bandwidth;

> +	}

> +	for (i = 0, j = 0; i < count; i++) {

> +		opp->bandwidth[i].avg = MBps_to_icc(bandwidth[j++]);

> +		opp->bandwidth[i].peak = MBps_to_icc(bandwidth[j++]);

> +	}

> +

> +free_bandwidth:

> +	kfree(bandwidth);

> +

> +	return ret;

> +}

> +

>  /**

>   * dev_pm_opp_of_remove_table() - Free OPP table entries created from static DT

>   *				  entries

> @@ -635,6 +733,10 @@ static struct dev_pm_opp *_opp_add_static_v2(struct opp_table *opp_table,

>  	if (opp_table->is_genpd)

>  		new_opp->pstate = pm_genpd_opp_to_performance_state(dev, new_opp);

>  

> +	ret = opp_parse_icc_bw(new_opp, dev, opp_table);

> +	if (ret)

> +		goto free_opp;

> +

>  	ret = _opp_add(dev, new_opp, opp_table, rate_not_available);

>  	if (ret) {

>  		/* Don't return error for duplicate OPPs */

> diff --git a/drivers/opp/opp.h b/drivers/opp/opp.h

> index 569b3525aa67..70a537f2dbd3 100644

> --- a/drivers/opp/opp.h

> +++ b/drivers/opp/opp.h

> @@ -24,6 +24,7 @@

>  

>  struct clk;

>  struct regulator;

> +struct icc_path;

>  

>  /* Lock to allow exclusive modification to the device and opp lists */

>  extern struct mutex opp_table_lock;

> @@ -62,6 +63,7 @@ extern struct list_head opp_tables;

>   * @rate:	Frequency in hertz

>   * @level:	Performance level

>   * @supplies:	Power supplies voltage/current values

> + * @bandwidth:	Interconnect bandwidth values

>   * @clock_latency_ns: Latency (in nanoseconds) of switching to this OPP's

>   *		frequency from any other OPP's frequency.

>   * @required_opps: List of OPPs that are required by this OPP.

> @@ -84,6 +86,7 @@ struct dev_pm_opp {

>  	unsigned int level;

>  

>  	struct dev_pm_opp_supply *supplies;

> +	struct dev_pm_opp_icc_bw *bandwidth;

>  

>  	unsigned long clock_latency_ns;

>  

> @@ -150,6 +153,8 @@ enum opp_table_access {

>   * @regulator_count: Number of power supply regulators. Its value can be -1

>   * (uninitialized), 0 (no opp-microvolt property) or > 0 (has opp-microvolt

>   * property).

> + * @paths: Interconnect path handles

> + * @path_count: Number of interconnect paths

>   * @genpd_performance_state: Device's power domain support performance state.

>   * @is_genpd: Marks if the OPP table belongs to a genpd.

>   * @set_opp: Platform specific set_opp callback

> @@ -194,6 +199,8 @@ struct opp_table {

>  	struct clk *clk;

>  	struct regulator **regulators;

>  	int regulator_count;

> +	struct icc_path **paths;

> +	unsigned int path_count;

>  	bool genpd_performance_state;

>  	bool is_genpd;

>  

> @@ -228,12 +235,14 @@ void _of_clear_opp_table(struct opp_table *opp_table);

>  struct opp_table *_managed_opp(struct device *dev, int index);

>  void _of_opp_free_required_opps(struct opp_table *opp_table,

>  				struct dev_pm_opp *opp);

> +int _of_find_paths(struct opp_table *opp_table, struct device *dev);

>  #else

>  static inline void _of_init_opp_table(struct opp_table *opp_table, struct device *dev, int index) {}

>  static inline void _of_clear_opp_table(struct opp_table *opp_table) {}

>  static inline struct opp_table *_managed_opp(struct device *dev, int index) { return NULL; }

>  static inline void _of_opp_free_required_opps(struct opp_table *opp_table,

>  					      struct dev_pm_opp *opp) {}

> +static inline int _of_find_paths(struct opp_table *opp_table, struct device *dev) { return 0; }

>  #endif

>  

>  #ifdef CONFIG_DEBUG_FS

> diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h

> index 24c757a32a7b..dabee09a92b8 100644

> --- a/include/linux/pm_opp.h

> +++ b/include/linux/pm_opp.h

> @@ -43,6 +43,18 @@ struct dev_pm_opp_supply {

>  	unsigned long u_amp;

>  };

>  

> +/**

> + * struct dev_pm_opp_icc_bw - Interconnect bandwidth values

> + * @avg:	Average bandwidth corresponding to this OPP (in icc units)

> + * @peak:	Peak bandwidth corresponding to this OPP (in icc units)

> + *

> + * This structure stores the bandwidth values for a single interconnect path.

> + */

> +struct dev_pm_opp_icc_bw {

> +	u32 avg;

> +	u32 peak;

> +};

> +

>  /**

>   * struct dev_pm_opp_info - OPP freq/voltage/current values

>   * @rate:	Target clk rate in hz

> @@ -127,6 +139,8 @@ struct opp_table *dev_pm_opp_set_regulators(struct device *dev, const char * con

>  void dev_pm_opp_put_regulators(struct opp_table *opp_table);

>  struct opp_table *dev_pm_opp_set_clkname(struct device *dev, const char * name);

>  void dev_pm_opp_put_clkname(struct opp_table *opp_table);

> +struct opp_table *dev_pm_opp_set_paths(struct device *dev);

> +void dev_pm_opp_put_paths(struct opp_table *opp_table);

>  struct opp_table *dev_pm_opp_register_set_opp_helper(struct device *dev, int (*set_opp)(struct dev_pm_set_opp_data *data));

>  void dev_pm_opp_unregister_set_opp_helper(struct opp_table *opp_table);

>  struct opp_table *dev_pm_opp_set_genpd_virt_dev(struct device *dev, struct device *virt_dev, int index);


-- 
viresh

Patch

diff --git a/drivers/opp/core.c b/drivers/opp/core.c
index 0420f7e8ad5b..97ee39ecdebd 100644
--- a/drivers/opp/core.c
+++ b/drivers/opp/core.c
@@ -19,6 +19,7 @@ 
 #include <linux/slab.h>
 #include <linux/device.h>
 #include <linux/export.h>
+#include <linux/interconnect.h>
 #include <linux/pm_domain.h>
 #include <linux/regulator/consumer.h>
 
@@ -876,6 +877,8 @@  static struct opp_table *_allocate_opp_table(struct device *dev, int index)
 				ret);
 	}
 
+	_of_find_paths(opp_table, dev);
+
 	BLOCKING_INIT_NOTIFIER_HEAD(&opp_table->head);
 	INIT_LIST_HEAD(&opp_table->opp_list);
 	kref_init(&opp_table->kref);
@@ -1129,11 +1132,12 @@  EXPORT_SYMBOL_GPL(dev_pm_opp_remove_all_dynamic);
 struct dev_pm_opp *_opp_allocate(struct opp_table *table)
 {
 	struct dev_pm_opp *opp;
-	int count, supply_size;
+	int count, supply_size, icc_size;
 
 	/* Allocate space for at least one supply */
 	count = table->regulator_count > 0 ? table->regulator_count : 1;
 	supply_size = sizeof(*opp->supplies) * count;
+	icc_size = sizeof(*opp->bandwidth) * table->path_count;
 
 	/* allocate new OPP node and supplies structures */
 	opp = kzalloc(sizeof(*opp) + supply_size, GFP_KERNEL);
@@ -1141,7 +1145,8 @@  struct dev_pm_opp *_opp_allocate(struct opp_table *table)
 		return NULL;
 
 	/* Put the supplies at the end of the OPP structure as an empty array */
-	opp->supplies = (struct dev_pm_opp_supply *)(opp + 1);
+	opp->bandwidth = (struct dev_pm_opp_icc_bw *)(opp + 1);
+	opp->supplies = (struct dev_pm_opp_supply *)(opp + icc_size + 1);
 	INIT_LIST_HEAD(&opp->node);
 
 	return opp;
@@ -1637,6 +1642,84 @@  void dev_pm_opp_put_clkname(struct opp_table *opp_table)
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_put_clkname);
 
+/**
+ * dev_pm_opp_set_paths() - Set interconnect path for a device
+ * @dev: Device for which interconnect path is being set.
+ *
+ * This must be called before any OPPs are initialized for the device.
+ */
+struct opp_table *dev_pm_opp_set_paths(struct device *dev)
+{
+	struct opp_table *opp_table;
+	int ret, i;
+
+	opp_table = dev_pm_opp_get_opp_table(dev);
+	if (!opp_table)
+		return ERR_PTR(-ENOMEM);
+
+	/* This should be called before OPPs are initialized */
+	if (WARN_ON(!list_empty(&opp_table->opp_list))) {
+		ret = -EBUSY;
+		goto err;
+	}
+
+	/* Another CPU that shares the OPP table has set the path */
+	if (opp_table->paths)
+		return opp_table;
+
+	opp_table->paths = kmalloc_array(opp_table->path_count,
+					 sizeof(*opp_table->paths), GFP_KERNEL);
+
+	/* Find interconnect path(s) for the device */
+	for (i = 0; i < opp_table->path_count; i++) {
+		opp_table->paths[i] = of_icc_get_by_index(dev, i);
+		if (IS_ERR(opp_table->paths[i])) {
+			ret = PTR_ERR(opp_table->paths[i]);
+			if (ret != -EPROBE_DEFER)
+				dev_err(dev, "%s: Couldn't find path%d: %d\n",
+					__func__, i, ret);
+			goto err;
+		}
+	}
+
+	return opp_table;
+
+err:
+	dev_pm_opp_put_opp_table(opp_table);
+
+	return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_set_paths);
+
+/**
+ * dev_pm_opp_put_paths() - Release interconnect path resources
+ * @opp_table: OPP table returned from dev_pm_opp_set_paths().
+ */
+void dev_pm_opp_put_paths(struct opp_table *opp_table)
+{
+	int i;
+
+	if (!opp_table->paths) {
+		pr_err("%s: Doesn't have paths set\n", __func__);
+		return;
+	}
+
+	/* Make sure there are no concurrent readers while updating opp_table */
+	WARN_ON(!list_empty(&opp_table->opp_list));
+
+	for (i = opp_table->path_count - 1; i >= 0; i--)
+		icc_put(opp_table->paths[i]);
+
+	_free_set_opp_data(opp_table);
+
+	kfree(opp_table->paths);
+	opp_table->paths = NULL;
+	opp_table->path_count = 0;
+
+	dev_pm_opp_put_opp_table(opp_table);
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_put_paths);
+
 /**
  * dev_pm_opp_register_set_opp_helper() - Register custom set OPP helper
  * @dev: Device for which the helper is getting registered.
diff --git a/drivers/opp/of.c b/drivers/opp/of.c
index c10c782d15aa..00af23280bc6 100644
--- a/drivers/opp/of.c
+++ b/drivers/opp/of.c
@@ -16,6 +16,7 @@ 
 #include <linux/cpu.h>
 #include <linux/errno.h>
 #include <linux/device.h>
+#include <linux/interconnect.h>
 #include <linux/of_device.h>
 #include <linux/pm_domain.h>
 #include <linux/slab.h>
@@ -363,6 +364,45 @@  static int _of_opp_alloc_required_opps(struct opp_table *opp_table,
 	return ret;
 }
 
+int _of_find_paths(struct opp_table *opp_table, struct device *dev)
+{
+	struct device_node *np;
+	int ret, i, count, num_paths;
+
+	np = of_node_get(dev->of_node);
+	if (np) {
+		count = of_count_phandle_with_args(np, "interconnects",
+						   "#interconnect-cells");
+		if (count % 2) {
+			dev_err(dev, "%s: Invalid interconnects values\n",
+				__func__);
+			ret = -EINVAL;
+			goto put_of_node;
+		}
+
+		num_paths = count / 2;
+		opp_table->paths = kcalloc(num_paths, sizeof(*opp_table->paths),
+					   GFP_KERNEL);
+		if (!opp_table->paths) {
+			ret = -ENOMEM;
+			goto put_of_node;
+		}
+
+		for (i = 0; i < num_paths; i++)
+			opp_table->paths[i] = of_icc_get_by_index(dev, i);
+
+		opp_table->path_count = num_paths;
+		of_node_put(np);
+	}
+
+	return 0;
+
+put_of_node:
+	of_node_put(np);
+
+	return ret;
+}
+
 static bool _opp_is_supported(struct device *dev, struct opp_table *opp_table,
 			      struct device_node *np)
 {
@@ -539,6 +579,64 @@  static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev,
 	return ret;
 }
 
+static int opp_parse_icc_bw(struct dev_pm_opp *opp, struct device *dev,
+			    struct opp_table *opp_table)
+{
+	struct property *prop = NULL;
+	u32 *bandwidth;
+	char name[] = "bandwidth-MBps";
+	int count, i, j, ret;
+
+	/* Search for "bandwidth-MBps" */
+	prop = of_find_property(opp->np, name, NULL);
+
+	/* Missing property is not a problem */
+	if (!prop) {
+		dev_dbg(dev, "%s: Missing %s property\n", __func__, name);
+		return 0;
+	}
+
+	if (!prop->value) {
+		dev_dbg(dev, "%s: Missing %s value\n", __func__, name);
+		return -ENODATA;
+	}
+
+	/*
+	 * Bandwidth consists of average and peak values like:
+	 * bandwidth-MBps = <avg-MBps peak-MBps>
+	 */
+	count = prop->length / sizeof(u32);
+	if (count % 2) {
+		dev_err(dev, "%s: Invalid %s values\n", __func__, name);
+		return -EINVAL;
+	}
+
+	if (opp_table->path_count != count / 2) {
+		dev_err(dev, "%s Mismatch between values and paths (%d %d)\n",
+			__func__, opp_table->path_count, count / 2);
+		return -EINVAL;
+	}
+
+	bandwidth = kmalloc_array(count, sizeof(*bandwidth), GFP_KERNEL);
+	if (!bandwidth)
+		return -ENOMEM;
+
+	ret = of_property_read_u32_array(opp->np, name, bandwidth, count);
+	if (ret) {
+		dev_err(dev, "%s: Error parsing %s: %d\n", __func__, name, ret);
+		goto free_bandwidth;
+	}
+	for (i = 0, j = 0; i < count; i++) {
+		opp->bandwidth[i].avg = MBps_to_icc(bandwidth[j++]);
+		opp->bandwidth[i].peak = MBps_to_icc(bandwidth[j++]);
+	}
+
+free_bandwidth:
+	kfree(bandwidth);
+
+	return ret;
+}
+
 /**
  * dev_pm_opp_of_remove_table() - Free OPP table entries created from static DT
  *				  entries
@@ -635,6 +733,10 @@  static struct dev_pm_opp *_opp_add_static_v2(struct opp_table *opp_table,
 	if (opp_table->is_genpd)
 		new_opp->pstate = pm_genpd_opp_to_performance_state(dev, new_opp);
 
+	ret = opp_parse_icc_bw(new_opp, dev, opp_table);
+	if (ret)
+		goto free_opp;
+
 	ret = _opp_add(dev, new_opp, opp_table, rate_not_available);
 	if (ret) {
 		/* Don't return error for duplicate OPPs */
diff --git a/drivers/opp/opp.h b/drivers/opp/opp.h
index 569b3525aa67..70a537f2dbd3 100644
--- a/drivers/opp/opp.h
+++ b/drivers/opp/opp.h
@@ -24,6 +24,7 @@ 
 
 struct clk;
 struct regulator;
+struct icc_path;
 
 /* Lock to allow exclusive modification to the device and opp lists */
 extern struct mutex opp_table_lock;
@@ -62,6 +63,7 @@  extern struct list_head opp_tables;
  * @rate:	Frequency in hertz
  * @level:	Performance level
  * @supplies:	Power supplies voltage/current values
+ * @bandwidth:	Interconnect bandwidth values
  * @clock_latency_ns: Latency (in nanoseconds) of switching to this OPP's
  *		frequency from any other OPP's frequency.
  * @required_opps: List of OPPs that are required by this OPP.
@@ -84,6 +86,7 @@  struct dev_pm_opp {
 	unsigned int level;
 
 	struct dev_pm_opp_supply *supplies;
+	struct dev_pm_opp_icc_bw *bandwidth;
 
 	unsigned long clock_latency_ns;
 
@@ -150,6 +153,8 @@  enum opp_table_access {
  * @regulator_count: Number of power supply regulators. Its value can be -1
  * (uninitialized), 0 (no opp-microvolt property) or > 0 (has opp-microvolt
  * property).
+ * @paths: Interconnect path handles
+ * @path_count: Number of interconnect paths
  * @genpd_performance_state: Device's power domain support performance state.
  * @is_genpd: Marks if the OPP table belongs to a genpd.
  * @set_opp: Platform specific set_opp callback
@@ -194,6 +199,8 @@  struct opp_table {
 	struct clk *clk;
 	struct regulator **regulators;
 	int regulator_count;
+	struct icc_path **paths;
+	unsigned int path_count;
 	bool genpd_performance_state;
 	bool is_genpd;
 
@@ -228,12 +235,14 @@  void _of_clear_opp_table(struct opp_table *opp_table);
 struct opp_table *_managed_opp(struct device *dev, int index);
 void _of_opp_free_required_opps(struct opp_table *opp_table,
 				struct dev_pm_opp *opp);
+int _of_find_paths(struct opp_table *opp_table, struct device *dev);
 #else
 static inline void _of_init_opp_table(struct opp_table *opp_table, struct device *dev, int index) {}
 static inline void _of_clear_opp_table(struct opp_table *opp_table) {}
 static inline struct opp_table *_managed_opp(struct device *dev, int index) { return NULL; }
 static inline void _of_opp_free_required_opps(struct opp_table *opp_table,
 					      struct dev_pm_opp *opp) {}
+static inline int _of_find_paths(struct opp_table *opp_table, struct device *dev) { return 0; }
 #endif
 
 #ifdef CONFIG_DEBUG_FS
diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h
index 24c757a32a7b..dabee09a92b8 100644
--- a/include/linux/pm_opp.h
+++ b/include/linux/pm_opp.h
@@ -43,6 +43,18 @@  struct dev_pm_opp_supply {
 	unsigned long u_amp;
 };
 
+/**
+ * struct dev_pm_opp_icc_bw - Interconnect bandwidth values
+ * @avg:	Average bandwidth corresponding to this OPP (in icc units)
+ * @peak:	Peak bandwidth corresponding to this OPP (in icc units)
+ *
+ * This structure stores the bandwidth values for a single interconnect path.
+ */
+struct dev_pm_opp_icc_bw {
+	u32 avg;
+	u32 peak;
+};
+
 /**
  * struct dev_pm_opp_info - OPP freq/voltage/current values
  * @rate:	Target clk rate in hz
@@ -127,6 +139,8 @@  struct opp_table *dev_pm_opp_set_regulators(struct device *dev, const char * con
 void dev_pm_opp_put_regulators(struct opp_table *opp_table);
 struct opp_table *dev_pm_opp_set_clkname(struct device *dev, const char * name);
 void dev_pm_opp_put_clkname(struct opp_table *opp_table);
+struct opp_table *dev_pm_opp_set_paths(struct device *dev);
+void dev_pm_opp_put_paths(struct opp_table *opp_table);
 struct opp_table *dev_pm_opp_register_set_opp_helper(struct device *dev, int (*set_opp)(struct dev_pm_set_opp_data *data));
 void dev_pm_opp_unregister_set_opp_helper(struct opp_table *opp_table);
 struct opp_table *dev_pm_opp_set_genpd_virt_dev(struct device *dev, struct device *virt_dev, int index);