| Message ID | 20190426191025.16131-1-bjorn.andersson@linaro.org |
|---|---|
| State | Accepted |
| Commit | 9000a55bedb44f8fbb03bdf072dbd0657fc92a44 |
| Headers | show |
| Series | arm64: dts: qcom: sdm845-mtp: Make USB1 peripheral | expand |
diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts index 02b8357c8ce8..2e78638eb73b 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts @@ -404,8 +404,8 @@ }; &usb_1_dwc3 { - /* Until we have Type C hooked up we'll force this as host. */ - dr_mode = "host"; + /* Until we have Type C hooked up we'll force this as peripheral. */ + dr_mode = "peripheral"; }; &usb_1_hsphy {
The MTP is a "mobile reference device", as such the default operation is to use fastboot to boot/flash software onto it and the common case is thereby that we boot with a USB cable connected downstream from a PC or a hub. And without support for the PMI8998 charger block VBUS will not be driven by the device. Switch to peripheral until we can enable OTG. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> --- arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) -- 2.18.0