[3/3] ASoC: ux500: register controls to card instead of codec

Message ID 1367330994-7259-4-git-send-email-fabio.baltieri@linaro.org
State Accepted
Commit f656df65743451d77e30e44e014b301721dff7cf
Headers show

Commit Message

Fabio Baltieri April 30, 2013, 2:09 p.m.
Update mop500_ab8500_machine_init to register mop500_ab8500_ctrls as
card control instead of codec control, as it only contains
SOC_DAPM_PIN_SWITCH definitions.

Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
---
 sound/soc/ux500/mop500_ab8500.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

Patch

diff --git a/sound/soc/ux500/mop500_ab8500.c b/sound/soc/ux500/mop500_ab8500.c
index 1a5c6b9..4606194 100644
--- a/sound/soc/ux500/mop500_ab8500.c
+++ b/sound/soc/ux500/mop500_ab8500.c
@@ -127,9 +127,9 @@  static int mop500_ab8500_set_mclk(struct device *dev,
 static int mclk_input_control_get(struct snd_kcontrol *kcontrol,
 				struct snd_ctl_elem_value *ucontrol)
 {
-	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+	struct snd_soc_card *card = snd_kcontrol_chip(kcontrol);
 	struct mop500_ab8500_drvdata *drvdata =
-				snd_soc_card_get_drvdata(codec->card);
+				snd_soc_card_get_drvdata(card);
 
 	ucontrol->value.enumerated.item[0] = drvdata->mclk_sel;
 
@@ -139,9 +139,9 @@  static int mclk_input_control_get(struct snd_kcontrol *kcontrol,
 static int mclk_input_control_put(struct snd_kcontrol *kcontrol,
 				struct snd_ctl_elem_value *ucontrol)
 {
-	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+	struct snd_soc_card *card = snd_kcontrol_chip(kcontrol);
 	struct mop500_ab8500_drvdata *drvdata =
-				snd_soc_card_get_drvdata(codec->card);
+				snd_soc_card_get_drvdata(card);
 	unsigned int val = ucontrol->value.enumerated.item[0];
 
 	if (val > (unsigned int)MCLK_ULPCLK)
@@ -377,7 +377,7 @@  int mop500_ab8500_machine_init(struct snd_soc_pcm_runtime *rtd)
 	drvdata->mclk_sel = MCLK_ULPCLK;
 
 	/* Add controls */
-	ret = snd_soc_add_codec_controls(codec, mop500_ab8500_ctrls,
+	ret = snd_soc_add_card_controls(codec->card, mop500_ab8500_ctrls,
 			ARRAY_SIZE(mop500_ab8500_ctrls));
 	if (ret < 0) {
 		pr_err("%s: Failed to add machine-controls (%d)!\n",