diff mbox series

[v8,net-next,4/5] net: ethernet: ti: cpsw_ethtool: allow res split while down

Message ID 20190705150502.6600-5-ivan.khoronzhuk@linaro.org
State New
Headers show
Series net: ethernet: ti: cpsw: Add XDP support | expand

Commit Message

Ivan Khoronzhuk July 5, 2019, 3:05 p.m. UTC
That's possible to set channel num while interfaces are down. When
interface gets up it should resplit budget. This resplit can happen
after phy is up but only if speed is changed, so should be set before
this, for this allow it to happen while changing number of channels,
when interfaces are down.

Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>

---
 drivers/net/ethernet/ti/cpsw_ethtool.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

-- 
2.17.1
diff mbox series

Patch

diff --git a/drivers/net/ethernet/ti/cpsw_ethtool.c b/drivers/net/ethernet/ti/cpsw_ethtool.c
index c477e6b620d6..e4d7185fde49 100644
--- a/drivers/net/ethernet/ti/cpsw_ethtool.c
+++ b/drivers/net/ethernet/ti/cpsw_ethtool.c
@@ -620,8 +620,7 @@  int cpsw_set_channels_common(struct net_device *ndev,
 		}
 	}
 
-	if (cpsw->usage_count)
-		cpsw_split_res(cpsw);
+	cpsw_split_res(cpsw);
 
 	ret = cpsw_resume_data_pass(ndev);
 	if (!ret)