diff mbox

[2/7] target-arm: Add raw_readfn and raw_writefn to ARMCPRegInfo

Message ID 1368797037-26976-3-git-send-email-peter.maydell@linaro.org
State Superseded
Headers show

Commit Message

Peter Maydell May 17, 2013, 1:23 p.m. UTC
For reading and writing register values from the kernel for KVM,
we need to provide accessor functions which are guaranteed to succeed
and don't impose access checks, mask out unwritable bits, etc.
Define new fields raw_readfn and raw_writefn for this purpose;
these only need to be provided if there is a readfn or writefn
already and it is not suitable.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target-arm/cpu.h    |   18 +++++++++++++++++-
 target-arm/helper.c |   13 +++++++++++++
 2 files changed, 30 insertions(+), 1 deletion(-)
diff mbox

Patch

diff --git a/target-arm/cpu.h b/target-arm/cpu.h
index 737c00c..1d8eba5 100644
--- a/target-arm/cpu.h
+++ b/target-arm/cpu.h
@@ -434,19 +434,22 @@  void armv7m_nvic_complete_irq(void *opaque, int irq);
  * a register definition to override a previous definition for the
  * same (cp, is64, crn, crm, opc1, opc2) tuple: either the new or the
  * old must have the OVERRIDE bit set.
+ * NO_MIGRATE indicates that this register should be ignored for migration;
+ * (eg because any state is accessed via some other coprocessor register).
  */
 #define ARM_CP_SPECIAL 1
 #define ARM_CP_CONST 2
 #define ARM_CP_64BIT 4
 #define ARM_CP_SUPPRESS_TB_END 8
 #define ARM_CP_OVERRIDE 16
+#define ARM_CP_NO_MIGRATE 32
 #define ARM_CP_NOP (ARM_CP_SPECIAL | (1 << 8))
 #define ARM_CP_WFI (ARM_CP_SPECIAL | (2 << 8))
 #define ARM_LAST_SPECIAL ARM_CP_WFI
 /* Used only as a terminator for ARMCPRegInfo lists */
 #define ARM_CP_SENTINEL 0xffff
 /* Mask of only the flag bits in a type field */
-#define ARM_CP_FLAG_MASK 0x1f
+#define ARM_CP_FLAG_MASK 0x3f
 
 /* Return true if cptype is a valid type field. This is used to try to
  * catch errors where the sentinel has been accidentally left off the end
@@ -562,6 +565,19 @@  struct ARMCPRegInfo {
      * by fieldoffset.
      */
     CPWriteFn *writefn;
+    /* Function for doing a "raw" read; used when we need to copy
+     * coprocessor state to the kernel for KVM or out for
+     * migration. This only needs to be provided if there is also a
+     * readfn and it makes an access permission check.
+     */
+    CPReadFn *raw_readfn;
+    /* Function for doing a "raw" write; used when we need to copy KVM
+     * kernel coprocessor state into userspace, or for inbound
+     * migration. This only needs to be provided if there is also a
+     * writefn and it makes an access permission check or masks out
+     * "unwritable" bits or has write-one-to-clear or similar behaviour.
+     */
+    CPWriteFn *raw_writefn;
     /* Function for resetting the register. If NULL, then reset will be done
      * by writing resetvalue to the field specified in fieldoffset. If
      * fieldoffset is 0 then no reset will be done.
diff --git a/target-arm/helper.c b/target-arm/helper.c
index fd055e8..2585d59 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -1392,6 +1392,19 @@  void define_one_arm_cp_reg_with_opaque(ARMCPU *cpu,
                 r2->crm = crm;
                 r2->opc1 = opc1;
                 r2->opc2 = opc2;
+                /* By convention, for wildcarded registers only the first
+                 * entry is used for migration; the others are marked as
+                 * NO_MIGRATE so we don't try to transfer the register
+                 * multiple times. Special registers (ie NOP/WFI) are
+                 * never migratable.
+                 */
+                if ((r->type & ARM_CP_SPECIAL) ||
+                    ((r->crm == CP_ANY) && crm != 0) ||
+                    ((r->opc1 == CP_ANY) && opc1 != 0) ||
+                    ((r->opc2 == CP_ANY) && opc2 != 0)) {
+                    r2->type |= ARM_CP_NO_MIGRATE;
+                }
+
                 /* Overriding of an existing definition must be explicitly
                  * requested.
                  */