diff mbox series

[v3,3/4] dt-bindings: ASoC: Add WSA881x bindings

Message ID 20190809133407.25918-4-srinivas.kandagatla@linaro.org
State New
Headers show
Series ASoC: codecs: Add WSA881x Smart Speaker amplifier support | expand

Commit Message

Srinivas Kandagatla Aug. 9, 2019, 1:34 p.m. UTC 
This patch adds bindings for WSA8810/WSA8815 Class-D Smart Speaker
Amplifier. This Amplifier also has a simple thermal sensor for
over temperature and speaker protection.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

---
 .../bindings/sound/qcom,wsa881x.txt           | 24 +++++++++++++++++++
 1 file changed, 24 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/qcom,wsa881x.txt

-- 
2.21.0
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/sound/qcom,wsa881x.txt b/Documentation/devicetree/bindings/sound/qcom,wsa881x.txt
new file mode 100644
index 000000000000..d2aeb5c58d30
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,wsa881x.txt
@@ -0,0 +1,24 @@ 
+Bindings for Qualcomm WSA8810/WSA8815 Class-D Smart Speaker Amplifier
+
+WSA8810 is a class-D smart speaker amplifier and WSA8815 is a high-output
+power class-D smart speaker amplifier. This amplifier uses SoundWire
+digital audio as primary interface.
+
+Required properties with SoundWire Interface:
+
+- compatible:		Should be textual representation of SoundWire Enumeration
+			address.
+			Refer to soundwire/slave.txt for details.
+			Should be "sdw0110217201000" for WSA8810
+
+- pd-gpios: 		Should be phandle and gpio pair for
+			Powerdown/Shutdown pin.
+- #thermal-sensor-cells: Should be 0 
+
+Example:
+
+spkr_left:wsa8810-left{
+	compatible = "sdw0110217201000";
+	#thermal-sensor-cells = <0>;
+	...
+};