diff mbox series

[6/7] ARM: iop32x: make mach/uncompress.h independent of mach/hardware.h

Message ID 20190809163334.489360-6-arnd@arndb.de
State Accepted
Commit ba9ef6afc45ff4eb2d9c6e26c6a94279ee3b4348
Headers show
Series [1/7,RFC] ARM: remove Intel iop33x and iop13xx support | expand

Commit Message

Arnd Bergmann Aug. 9, 2019, 4:33 p.m. UTC
All supported uarts use the same address: IQ80321_UART and IQ31244_UART
are both defined to the default value of 0xfe800000. By using that as
the address unconditionally, all dependencies on other machine headers
can be avoided.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

---
 arch/arm/mach-iop32x/include/mach/uncompress.h | 18 ++----------------
 1 file changed, 2 insertions(+), 16 deletions(-)

-- 
2.20.0
diff mbox series

Patch

diff --git a/arch/arm/mach-iop32x/include/mach/uncompress.h b/arch/arm/mach-iop32x/include/mach/uncompress.h
index ed4ac3e28fa1..c8548875d942 100644
--- a/arch/arm/mach-iop32x/include/mach/uncompress.h
+++ b/arch/arm/mach-iop32x/include/mach/uncompress.h
@@ -6,9 +6,8 @@ 
 #include <asm/types.h>
 #include <asm/mach-types.h>
 #include <linux/serial_reg.h>
-#include <mach/hardware.h>
 
-volatile u8 *uart_base;
+#define uart_base ((volatile u8 *)0xfe800000)
 
 #define TX_DONE		(UART_LSR_TEMT | UART_LSR_THRE)
 
@@ -23,17 +22,4 @@  static inline void flush(void)
 {
 }
 
-static __inline__ void __arch_decomp_setup(unsigned long arch_id)
-{
-	if (machine_is_iq80321())
-		uart_base = (volatile u8 *)IQ80321_UART;
-	else if (machine_is_iq31244() || machine_is_em7210())
-		uart_base = (volatile u8 *)IQ31244_UART;
-	else
-		uart_base = (volatile u8 *)0xfe800000;
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
+#define arch_decomp_setup() do { } while (0)