| Message ID | 20190916105433.11404-9-ivan.khoronzhuk@linaro.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | None | expand |
On Mon, Sep 16, 2019 at 3:58 AM Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> wrote: > Please don't prepend "samples: bpf: makefile:" to patches, "samples/bpf: " is a typical we've used for BPF samples changes. > The main reason for that - HOSTCC and CC have different aims. > HOSTCC is used to build programs running on host, that can > cross-comple target programs with CC. It was tested for arm and arm64 > cross compilation, based on linaro toolchain, but should work for > others. > > So, in order to split cross compilation (CC) with host build (HOSTCC), > lets base samples on Makefile.target. It allows to cross-compile > samples/bpf programs with CC while auxialry tools running on host > built with HOSTCC. > > Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> > --- > samples/bpf/Makefile | 135 ++++++++++++++++++++++--------------------- > 1 file changed, 69 insertions(+), 66 deletions(-) > > diff --git a/samples/bpf/Makefile b/samples/bpf/Makefile > index 9d923546e087..1579cc16a1c2 100644 > --- a/samples/bpf/Makefile > +++ b/samples/bpf/Makefile > @@ -4,55 +4,53 @@ BPF_SAMPLES_PATH ?= $(abspath $(srctree)/$(src)) > TOOLS_PATH := $(BPF_SAMPLES_PATH)/../../tools > > # List of programs to build > -hostprogs-y := test_lru_dist > -hostprogs-y += sock_example > -hostprogs-y += fds_example > -hostprogs-y += sockex1 > -hostprogs-y += sockex2 > -hostprogs-y += sockex3 > -hostprogs-y += tracex1 > -hostprogs-y += tracex2 > -hostprogs-y += tracex3 > -hostprogs-y += tracex4 > -hostprogs-y += tracex5 > -hostprogs-y += tracex6 > -hostprogs-y += tracex7 > -hostprogs-y += test_probe_write_user > -hostprogs-y += trace_output > -hostprogs-y += lathist > -hostprogs-y += offwaketime > -hostprogs-y += spintest > -hostprogs-y += map_perf_test > -hostprogs-y += test_overhead > -hostprogs-y += test_cgrp2_array_pin > -hostprogs-y += test_cgrp2_attach > -hostprogs-y += test_cgrp2_sock > -hostprogs-y += test_cgrp2_sock2 > -hostprogs-y += xdp1 > -hostprogs-y += xdp2 > -hostprogs-y += xdp_router_ipv4 > -hostprogs-y += test_current_task_under_cgroup > -hostprogs-y += trace_event > -hostprogs-y += sampleip > -hostprogs-y += tc_l2_redirect > -hostprogs-y += lwt_len_hist > -hostprogs-y += xdp_tx_iptunnel > -hostprogs-y += test_map_in_map > -hostprogs-y += per_socket_stats_example > -hostprogs-y += xdp_redirect > -hostprogs-y += xdp_redirect_map > -hostprogs-y += xdp_redirect_cpu > -hostprogs-y += xdp_monitor > -hostprogs-y += xdp_rxq_info > -hostprogs-y += syscall_tp > -hostprogs-y += cpustat > -hostprogs-y += xdp_adjust_tail > -hostprogs-y += xdpsock > -hostprogs-y += xdp_fwd > -hostprogs-y += task_fd_query > -hostprogs-y += xdp_sample_pkts > -hostprogs-y += ibumad > -hostprogs-y += hbm > +tprogs-y := test_lru_dist > +tprogs-y += sock_example > +tprogs-y += fds_example > +tprogs-y += sockex1 > +tprogs-y += sockex2 > +tprogs-y += sockex3 > +tprogs-y += tracex1 > +tprogs-y += tracex2 > +tprogs-y += tracex3 > +tprogs-y += tracex4 > +tprogs-y += tracex5 > +tprogs-y += tracex6 > +tprogs-y += tracex7 > +tprogs-y += test_probe_write_user > +tprogs-y += trace_output > +tprogs-y += lathist > +tprogs-y += offwaketime > +tprogs-y += spintest > +tprogs-y += map_perf_test > +tprogs-y += test_overhead > +tprogs-y += test_cgrp2_array_pin > +tprogs-y += test_cgrp2_attach > +tprogs-y += test_cgrp2_sock > +tprogs-y += test_cgrp2_sock2 > +tprogs-y += xdp1 > +tprogs-y += xdp2 > +tprogs-y += xdp_router_ipv4 > +tprogs-y += test_current_task_under_cgroup > +tprogs-y += trace_event > +tprogs-y += sampleip > +tprogs-y += tc_l2_redirect > +tprogs-y += lwt_len_hist > +tprogs-y += xdp_tx_iptunnel > +tprogs-y += test_map_in_map > +tprogs-y += xdp_redirect_map > +tprogs-y += xdp_redirect_cpu > +tprogs-y += xdp_monitor > +tprogs-y += xdp_rxq_info > +tprogs-y += syscall_tp > +tprogs-y += cpustat > +tprogs-y += xdp_adjust_tail > +tprogs-y += xdpsock > +tprogs-y += xdp_fwd > +tprogs-y += task_fd_query > +tprogs-y += xdp_sample_pkts > +tprogs-y += ibumad > +tprogs-y += hbm > > # Libbpf dependencies > LIBBPF = $(TOOLS_PATH)/lib/bpf/libbpf.a > @@ -111,7 +109,7 @@ ibumad-objs := bpf_load.o ibumad_user.o $(TRACE_HELPERS) > hbm-objs := bpf_load.o hbm.o $(CGROUP_HELPERS) > > # Tell kbuild to always build the programs > -always := $(hostprogs-y) > +always := $(tprogs-y) > always += sockex1_kern.o > always += sockex2_kern.o > always += sockex3_kern.o > @@ -170,21 +168,6 @@ always += ibumad_kern.o > always += hbm_out_kern.o > always += hbm_edt_kern.o > > -KBUILD_HOSTCFLAGS += -I$(objtree)/usr/include > -KBUILD_HOSTCFLAGS += -I$(srctree)/tools/lib/bpf/ > -KBUILD_HOSTCFLAGS += -I$(srctree)/tools/testing/selftests/bpf/ > -KBUILD_HOSTCFLAGS += -I$(srctree)/tools/lib/ -I$(srctree)/tools/include > -KBUILD_HOSTCFLAGS += -I$(srctree)/tools/perf > - > -HOSTCFLAGS_bpf_load.o += -Wno-unused-variable > - > -KBUILD_HOSTLDLIBS += $(LIBBPF) -lelf > -HOSTLDLIBS_tracex4 += -lrt > -HOSTLDLIBS_trace_output += -lrt > -HOSTLDLIBS_map_perf_test += -lrt > -HOSTLDLIBS_test_overhead += -lrt > -HOSTLDLIBS_xdpsock += -pthread > - > ifeq ($(ARCH), arm) > # Strip all except -D__LINUX_ARM_ARCH__ option needed to handle linux > # headers when arm instruction set identification is requested. > @@ -192,9 +175,27 @@ ARM_ARCH_SELECTOR = $(shell echo "$(KBUILD_CFLAGS) " | \ > sed 's/[[:blank:]]/\n/g' | sed '/^-D__LINUX_ARM_ARCH__/!d') > > CLANG_EXTRA_CFLAGS := $(ARM_ARCH_SELECTOR) > -KBUILD_HOSTCFLAGS := $(ARM_ARCH_SELECTOR) > +TPROGS_CFLAGS += $(ARM_ARCH_SELECTOR) > endif > > +TPROGS_LDLIBS := $(KBUILD_HOSTLDLIBS) Please group TPROGS_LDLIBS definition together with the one below, there doesn't seem to be a reason to split them this way. But also, it's kind of weird to use host libraries as cross-compiled libraries as well. Is that intentional? > +TPROGS_CFLAGS += $(KBUILD_HOSTCFLAGS) $(HOST_EXTRACFLAGS) Same here, is it right to use HOSTCFLAGS and HOST_EXTRACFLAGS as a base for cross-compiled cflags? > +TPROGS_CFLAGS += -I$(objtree)/usr/include > +TPROGS_CFLAGS += -I$(srctree)/tools/lib/bpf/ > +TPROGS_CFLAGS += -I$(srctree)/tools/testing/selftests/bpf/ > +TPROGS_CFLAGS += -I$(srctree)/tools/lib/ > +TPROGS_CFLAGS += -I$(srctree)/tools/include > +TPROGS_CFLAGS += -I$(srctree)/tools/perf > + > +TPROGCFLAGS_bpf_load.o += -Wno-unused-variable > + > +TPROGS_LDLIBS += $(LIBBPF) -lelf > +TPROGLDLIBS_tracex4 += -lrt > +TPROGLDLIBS_trace_output += -lrt > +TPROGLDLIBS_map_perf_test += -lrt > +TPROGLDLIBS_test_overhead += -lrt > +TPROGLDLIBS_xdpsock += -pthread > + > # Allows pointing LLC/CLANG to a LLVM backend with bpf support, redefine on cmdline: > # make samples/bpf/ LLC=~/git/llvm/build/bin/llc CLANG=~/git/llvm/build/bin/clang > LLC ?= llc > @@ -285,6 +286,8 @@ $(obj)/hbm_out_kern.o: $(src)/hbm.h $(src)/hbm_kern.h > $(obj)/hbm.o: $(src)/hbm.h > $(obj)/hbm_edt_kern.o: $(src)/hbm.h $(src)/hbm_kern.h > > +-include $(BPF_SAMPLES_PATH)/Makefile.target > + > # asm/sysreg.h - inline assembly used by it is incompatible with llvm. > # But, there is no easy way to fix it, so just exclude it since it is > # useless for BPF samples. > -- > 2.17.1 >
On Tue, Sep 17, 2019 at 04:28:01PM -0700, Andrii Nakryiko wrote: >On Mon, Sep 16, 2019 at 3:58 AM Ivan Khoronzhuk ><ivan.khoronzhuk@linaro.org> wrote: >> > >Please don't prepend "samples: bpf: makefile:" to patches, >"samples/bpf: " is a typical we've used for BPF samples changes. Ok. > > >> The main reason for that - HOSTCC and CC have different aims. >> HOSTCC is used to build programs running on host, that can >> cross-comple target programs with CC. It was tested for arm and arm64 >> cross compilation, based on linaro toolchain, but should work for >> others. >> >> So, in order to split cross compilation (CC) with host build (HOSTCC), >> lets base samples on Makefile.target. It allows to cross-compile >> samples/bpf programs with CC while auxialry tools running on host >> built with HOSTCC. >> >> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> >> --- >> samples/bpf/Makefile | 135 ++++++++++++++++++++++--------------------- >> 1 file changed, 69 insertions(+), 66 deletions(-) >> >> diff --git a/samples/bpf/Makefile b/samples/bpf/Makefile >> index 9d923546e087..1579cc16a1c2 100644 >> --- a/samples/bpf/Makefile >> +++ b/samples/bpf/Makefile >> @@ -4,55 +4,53 @@ BPF_SAMPLES_PATH ?= $(abspath $(srctree)/$(src)) >> TOOLS_PATH := $(BPF_SAMPLES_PATH)/../../tools >> >> # List of programs to build >> -hostprogs-y := test_lru_dist [...] >> -KBUILD_HOSTCFLAGS := $(ARM_ARCH_SELECTOR) >> +TPROGS_CFLAGS += $(ARM_ARCH_SELECTOR) >> endif >> >> +TPROGS_LDLIBS := $(KBUILD_HOSTLDLIBS) > >Please group TPROGS_LDLIBS definition together with the one below, >there doesn't seem to be a reason to split them this way. No. It's used in Makefile.target and should be here, following hostprog logic. > >But also, it's kind of weird to use host libraries as cross-compiled >libraries as well. Is that intentional? No cross-compile split yet. This patch replace only KBUILD on TPROGS. It's done in following patches. > >> +TPROGS_CFLAGS += $(KBUILD_HOSTCFLAGS) $(HOST_EXTRACFLAGS) > >Same here, is it right to use HOSTCFLAGS and HOST_EXTRACFLAGS as a >base for cross-compiled cflags? same [...] -- Regards, Ivan Khoronzhuk
diff --git a/samples/bpf/Makefile b/samples/bpf/Makefile index 9d923546e087..1579cc16a1c2 100644 --- a/samples/bpf/Makefile +++ b/samples/bpf/Makefile @@ -4,55 +4,53 @@ BPF_SAMPLES_PATH ?= $(abspath $(srctree)/$(src)) TOOLS_PATH := $(BPF_SAMPLES_PATH)/../../tools # List of programs to build -hostprogs-y := test_lru_dist -hostprogs-y += sock_example -hostprogs-y += fds_example -hostprogs-y += sockex1 -hostprogs-y += sockex2 -hostprogs-y += sockex3 -hostprogs-y += tracex1 -hostprogs-y += tracex2 -hostprogs-y += tracex3 -hostprogs-y += tracex4 -hostprogs-y += tracex5 -hostprogs-y += tracex6 -hostprogs-y += tracex7 -hostprogs-y += test_probe_write_user -hostprogs-y += trace_output -hostprogs-y += lathist -hostprogs-y += offwaketime -hostprogs-y += spintest -hostprogs-y += map_perf_test -hostprogs-y += test_overhead -hostprogs-y += test_cgrp2_array_pin -hostprogs-y += test_cgrp2_attach -hostprogs-y += test_cgrp2_sock -hostprogs-y += test_cgrp2_sock2 -hostprogs-y += xdp1 -hostprogs-y += xdp2 -hostprogs-y += xdp_router_ipv4 -hostprogs-y += test_current_task_under_cgroup -hostprogs-y += trace_event -hostprogs-y += sampleip -hostprogs-y += tc_l2_redirect -hostprogs-y += lwt_len_hist -hostprogs-y += xdp_tx_iptunnel -hostprogs-y += test_map_in_map -hostprogs-y += per_socket_stats_example -hostprogs-y += xdp_redirect -hostprogs-y += xdp_redirect_map -hostprogs-y += xdp_redirect_cpu -hostprogs-y += xdp_monitor -hostprogs-y += xdp_rxq_info -hostprogs-y += syscall_tp -hostprogs-y += cpustat -hostprogs-y += xdp_adjust_tail -hostprogs-y += xdpsock -hostprogs-y += xdp_fwd -hostprogs-y += task_fd_query -hostprogs-y += xdp_sample_pkts -hostprogs-y += ibumad -hostprogs-y += hbm +tprogs-y := test_lru_dist +tprogs-y += sock_example +tprogs-y += fds_example +tprogs-y += sockex1 +tprogs-y += sockex2 +tprogs-y += sockex3 +tprogs-y += tracex1 +tprogs-y += tracex2 +tprogs-y += tracex3 +tprogs-y += tracex4 +tprogs-y += tracex5 +tprogs-y += tracex6 +tprogs-y += tracex7 +tprogs-y += test_probe_write_user +tprogs-y += trace_output +tprogs-y += lathist +tprogs-y += offwaketime +tprogs-y += spintest +tprogs-y += map_perf_test +tprogs-y += test_overhead +tprogs-y += test_cgrp2_array_pin +tprogs-y += test_cgrp2_attach +tprogs-y += test_cgrp2_sock +tprogs-y += test_cgrp2_sock2 +tprogs-y += xdp1 +tprogs-y += xdp2 +tprogs-y += xdp_router_ipv4 +tprogs-y += test_current_task_under_cgroup +tprogs-y += trace_event +tprogs-y += sampleip +tprogs-y += tc_l2_redirect +tprogs-y += lwt_len_hist +tprogs-y += xdp_tx_iptunnel +tprogs-y += test_map_in_map +tprogs-y += xdp_redirect_map +tprogs-y += xdp_redirect_cpu +tprogs-y += xdp_monitor +tprogs-y += xdp_rxq_info +tprogs-y += syscall_tp +tprogs-y += cpustat +tprogs-y += xdp_adjust_tail +tprogs-y += xdpsock +tprogs-y += xdp_fwd +tprogs-y += task_fd_query +tprogs-y += xdp_sample_pkts +tprogs-y += ibumad +tprogs-y += hbm # Libbpf dependencies LIBBPF = $(TOOLS_PATH)/lib/bpf/libbpf.a @@ -111,7 +109,7 @@ ibumad-objs := bpf_load.o ibumad_user.o $(TRACE_HELPERS) hbm-objs := bpf_load.o hbm.o $(CGROUP_HELPERS) # Tell kbuild to always build the programs -always := $(hostprogs-y) +always := $(tprogs-y) always += sockex1_kern.o always += sockex2_kern.o always += sockex3_kern.o @@ -170,21 +168,6 @@ always += ibumad_kern.o always += hbm_out_kern.o always += hbm_edt_kern.o -KBUILD_HOSTCFLAGS += -I$(objtree)/usr/include -KBUILD_HOSTCFLAGS += -I$(srctree)/tools/lib/bpf/ -KBUILD_HOSTCFLAGS += -I$(srctree)/tools/testing/selftests/bpf/ -KBUILD_HOSTCFLAGS += -I$(srctree)/tools/lib/ -I$(srctree)/tools/include -KBUILD_HOSTCFLAGS += -I$(srctree)/tools/perf - -HOSTCFLAGS_bpf_load.o += -Wno-unused-variable - -KBUILD_HOSTLDLIBS += $(LIBBPF) -lelf -HOSTLDLIBS_tracex4 += -lrt -HOSTLDLIBS_trace_output += -lrt -HOSTLDLIBS_map_perf_test += -lrt -HOSTLDLIBS_test_overhead += -lrt -HOSTLDLIBS_xdpsock += -pthread - ifeq ($(ARCH), arm) # Strip all except -D__LINUX_ARM_ARCH__ option needed to handle linux # headers when arm instruction set identification is requested. @@ -192,9 +175,27 @@ ARM_ARCH_SELECTOR = $(shell echo "$(KBUILD_CFLAGS) " | \ sed 's/[[:blank:]]/\n/g' | sed '/^-D__LINUX_ARM_ARCH__/!d') CLANG_EXTRA_CFLAGS := $(ARM_ARCH_SELECTOR) -KBUILD_HOSTCFLAGS := $(ARM_ARCH_SELECTOR) +TPROGS_CFLAGS += $(ARM_ARCH_SELECTOR) endif +TPROGS_LDLIBS := $(KBUILD_HOSTLDLIBS) +TPROGS_CFLAGS += $(KBUILD_HOSTCFLAGS) $(HOST_EXTRACFLAGS) +TPROGS_CFLAGS += -I$(objtree)/usr/include +TPROGS_CFLAGS += -I$(srctree)/tools/lib/bpf/ +TPROGS_CFLAGS += -I$(srctree)/tools/testing/selftests/bpf/ +TPROGS_CFLAGS += -I$(srctree)/tools/lib/ +TPROGS_CFLAGS += -I$(srctree)/tools/include +TPROGS_CFLAGS += -I$(srctree)/tools/perf + +TPROGCFLAGS_bpf_load.o += -Wno-unused-variable + +TPROGS_LDLIBS += $(LIBBPF) -lelf +TPROGLDLIBS_tracex4 += -lrt +TPROGLDLIBS_trace_output += -lrt +TPROGLDLIBS_map_perf_test += -lrt +TPROGLDLIBS_test_overhead += -lrt +TPROGLDLIBS_xdpsock += -pthread + # Allows pointing LLC/CLANG to a LLVM backend with bpf support, redefine on cmdline: # make samples/bpf/ LLC=~/git/llvm/build/bin/llc CLANG=~/git/llvm/build/bin/clang LLC ?= llc @@ -285,6 +286,8 @@ $(obj)/hbm_out_kern.o: $(src)/hbm.h $(src)/hbm_kern.h $(obj)/hbm.o: $(src)/hbm.h $(obj)/hbm_edt_kern.o: $(src)/hbm.h $(src)/hbm_kern.h +-include $(BPF_SAMPLES_PATH)/Makefile.target + # asm/sysreg.h - inline assembly used by it is incompatible with llvm. # But, there is no easy way to fix it, so just exclude it since it is # useless for BPF samples.
The main reason for that - HOSTCC and CC have different aims. HOSTCC is used to build programs running on host, that can cross-comple target programs with CC. It was tested for arm and arm64 cross compilation, based on linaro toolchain, but should work for others. So, in order to split cross compilation (CC) with host build (HOSTCC), lets base samples on Makefile.target. It allows to cross-compile samples/bpf programs with CC while auxialry tools running on host built with HOSTCC. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> --- samples/bpf/Makefile | 135 ++++++++++++++++++++++--------------------- 1 file changed, 69 insertions(+), 66 deletions(-) -- 2.17.1